USER MANUAL Ti Main parameters Double E Item NO.:E564-003 Material: plastic and electronic components Batteries: Car batteries:1pc of 4.8V AArechargeable battery pack
& 3 pcs of 1.5V AA non-rechargeable batteries Remote controller batteries: 2 pcs of 1.5V AA batteries. Speed Key Code Button of the Headstock Tractor On ze Mute Switch Code Button of the Container e@= Tractor Off Left Trigger 2 | @ Right Trigger Holder Rise ys Holder Down Fig 1A
| 2 | Battery Installation 1.Open the cover of battery case located in the back of controller, insert 2 pcs of 1.5V AA batteries into the battery case, and then screw the cover (Fig 2A). 2.Use a screwdriver to unscrew the battery cover located in the bottom of the car, install 4 pcs of 1.5V AArechargeable battery pack as per the polarity of the battery,then cover the battery cover and screw it. Battery installation of the container: Push aside the four knobs located in the car bottom, take out the container, install 1 pc of 4.8V AA non-rechargeable batteries as per the polarity of the battery, and then reinstall the container and push the knobs back. Cell cover t open A Close Open \Close Screw-socket Open ~Close Open Close Fig 2A Fig 2B Notice: This product shall be charged for two to threehours. The supporting USB charger shall not be used for other devices other than this product. Charger Bettery Instructions of 2.4GHz Auto-Matching 1.Auto-matching of the headstock: After install the batteries into the headstock and the remote controller, turn on both switch, the front/rear lights of the headstock and the indicator of the remote controller will flash quickly, that means itis start at a state of auto-matching. Press the code button of the headstock, the car will make a sound of DI-DI, the indicator will flash quickly twice and then lights off, the front/rear lights will off, that means the auto-matching is successful. 2. Auto-matching of the container: After install the batteries into the container, turn on the switch, it will start at a state of auto-matching when the rear lights flash quickly. Press the code button of the container, the indicator will flash quickly twice and then the light off, the rear lights will off, that means the auto-matching is successful. 3. One remote controller can only match with one car. After the success of auto-
matching, there is non-interference of each car. 4.If the remote controller cannot find out the 2.4G signal in 1 minutes, it will automatically turn in a sleeping state (lights off of the indicator). Press any key to reactive the car. 5. Repair the car and the remote controller after turn off the switch of both. Basic Operation & Functions 1.Turn ON/OFF
@ Press the ON/OFF key at the bottom of the truck, it will make a sound of start. Press the key again to turn off. 2.Horn Key e@ Press the horn key on the remote controller, the truck will make a simulated horn sound. 3.Forward/Backward Move the left trigger ahead/back, the truck will go forward/backward. 4.Turn Left/Right Move the left trigger ahead/back, and turn the right trigger left/right, the truck will turn left/right(Fig 4B). Backward Turn Right rom Forward Fig 4 5. Holder Rise/Down, Tractor ON/OFF (Fig 4C) e 1. Holder Down: After turn on, press the button of holder down, the holder of container will gradually down. 2. Holder Rise: After turn on, press the button of holder rise, the holder of container will gradually rise. e@ 3. Tractor ON: After turn on, press on the button of tractor on, the lights will on and the headstock will make a working sound of hu-hu; then release the button, the tractor will stop making sounds. e 4. Tractor OFF: After turn on, press on the button of tractor off, the lights will on and the headstock will make a working sound of hu-hu; then release the button, the tractor will stop making sounds. 2 Ey Advanced Functions 1.Auto OFF
@ If the truck cannot find out the signal within 1 minute, it will automatically turn off. 2.Multi-Player e@ The product is remote controlled by 2.4GHz, which allows many players to play together at the same time. 6 | Recharging Notice: Please push the power switch toOFF position if the product will not be used for along time. Take the batteries out of the remote controller and the truck for storing. Notice 1.Don't play the toy on the road, select a safe place for operating to avoid dangerous. 2.Plays the toy in water may cause short-circuit damage. Please use the dry cloth to clean the car. 3.If abnormal speed or reaction, it may be because of insufficient battery power, Please replace new batteries. 4.Please install the battery in a correct polarity. 5.Do not mix new and old batteries together, short-circuited. 6.Don't break the remote control antenna to prevent injury. Frequency bands : 2405MHz to 2475MHz Maximum output power : -4.3dBm For EU Manufacturer : Doubleeagle Industry (China) Limited. Address : Xingda Industrial Park, Chenghai District, Shantou City, Guangdong Province, China. Importer : JAMARA e.K. Address : Inh. Manuel Natterer Am Lauerbuhl 5 - DE-88317 Aichstetten Germany CHOKING HAZARD-small parts, not for children under 3 years. changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.