USER MANUAL These functions could be multiple used for simulating operation. ol Advanced Functions Main parameters 1Mute Switch Item No.: E525-003 Double E After starting the truck, to press the Horn key fora long Material: plastic and electronic components time, the car could change toa mute condition. To press. Batteries: Car battery: 4.8V AA rechargeable battery: the Horn key again, it could be switched to the sound Remote controller battery: 2 pcs of 1.5V AA batteries. station. Turn On/OFF- Horn Key 2.DEMO Fancdon. 7 a isk ii ;
; To press the DEMO key, the car could operate a series of the functions automatically; to Carriage Up Keyq,_. =m@ Carriage Down Key to press te Domo ey: te carcoule open y SRO ns ey a aN geen aT Programme Key- Right Trigger 3. Auto off Left Trigger: : e 88 After turning on the remote controller, the car would be auto off without receiving any Indicator signal from the remote controller by 60sec. 4.Braking Function Bi Battery Installation When the car goes forward/backward, to change the direction directly, the car would be 1.Open the cover of battery case locates in the back of controller, inserts 2 pes of 1.5V AA with braking sound and motion. batteries into the battery case, and then screw the cover (Fig 2A). 5.Multi-playing function 2. Please screw out the cover at the back of car by screwdriver, open the cover as the arrow The product is remote controlled by 2.4GHz, so many cars could be played together by showed, insert Ipcs of 4.8 V AA battery, then screw the cover (Fig 2B). players. Charger G Recharging _, Pa = ice: Please push the power switch to OFF position if the product will not be used for a Screwdriver Notice: Charge the battery for about 4 to5hours, butit charges for 8 hours 3 | 2.4G Auto Coding before initial use. 1.After installing the batteries on the car and the remote controller, turn on the power of both. There!
is a sound of DI from the car, and the indicator on the remote controller and the lights on the car would be flashing slowly. That means the car is in al state of coding, the auto-coding would be cuccecsful if the car with DI_Dl sound Fig 2B oO Pe eae Oe ted See tay et eran See ee eee charge the battery for 4 to 5 hours, 8 hours for initial use. Notice 1.Don't play the toy on the road, select a safe place for operating to avoid dangerous. 2.Plays the toy in water may cause short-circuit damage. Please use the dry cloth to clean the car. 3.If abnormal speed or reaction, it may be because of insufficient battery power, please charge the battery. 4.The batteries should be charged under adult supervision. Please use the batteries recommended. 5.Please install the battery in a correct polarity. 6.Do not mix new and old batteries together, short-circuited. a 2.Each remote controller could be only coded with one car. There is no any interference if auto-coding is success. 3.1t could be re-auto-coded with other car or remote controller by turning off the power of both. Basic Operation & Functions 1.Turn ON/OFF
@ Press the ON/OFF key, there will be a start-up sound ; to press the key again after starting. (Fig 3A) 2.Horn Key
@ To press the Horn Key on remote controller after starting the car, the car would emit a simulated FSAI CER OS EE SRE SAAS RRR TAO 8.Please check the plug, case and other units of charger regularly to make sure that it is not broken.Don't use again if you find abnormality of the charger. 9.Please do not connect the product to different performance power. CHOKING HAZARD-small parts, not for children under 3 years. Specifications colors and contents may vary from illustrations. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. encouraged to try to correct the agen. + 7, - ee 3.Forward/Backward determined by turning the equipment off and on, the user To push the Left Handle forward/backward, the car would go forward/backward.(Fig 3B) LAA eR 4.Turn Left/Right Increase the separation between the equipment and receiver. To push the Left Handle forward/backward, Right Handle turns left/right, the car ~~ Connect the equipment into an outlet on a circuit different from that to which the receiver is would turn left/right. (Fig 3C). connected.
~~ Consult the dealer or an experienced radio/TV technician for help. 5.Up & Down of Carriage After starting the car, to press the key of Up & Down, the car would go up & down witha mechanical sound. (Fig 3D) 06.03.00E525.02 14 2