W860NB IB-200-W0860N-00 V1.0 85x170mm128 Introduction Before using the headphone, please carefully read this user manual and keep securely for further reference. Features Active Noise Cancelling (ANC) technology with Hybrid noise reduction for excellent performance Bluetooth V4.1 technology to make wireless transmission stable and further Support NFC pairing and Qualcomm aptX audio decoding Up to 25 hours of playback and 1500 hours of standby Smart touch to control call/music/volume by touching ear shell Wireless and wired modes for connection versatility Protein leather earmuffs for comfortable wearing flip and fold portable design for easy carrying Specifications Bluetooth version: Bluetooth V4.1 Bluetooth profiles: HFP, HSP, A2DP, AVRCP Distance: 10m Working time: 25 hours Standby time: About 1500 hours Charging time: About 4 hours Charging Input: 5.0V 1A Frequency response: 20Hz-20KHz Sensitivity: 97dB Impedance: 32 Note: The design and specifications may be changed without prior notice in order to make improvements. W860NB Bluetooth Active Noise Cancelling Stereo Headphones EDIFIER International Limited www.edifier.com 2017 Edifier International Limited. All rights reserved. Printed in China NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails. Ver1.0 IB-200-W0860N-00 Operating instructions 1 1 3 Box content II. Charging III. Connection Headphone *1PCS Storage bag *1PCS User manual *1PCS There is a built-in rechargeable battery inside the headphone. Before the first time use, It is recommended to fully charge the battery to avoid shortening the battery life; during using, if red indicator instead of blue indicator blinks along with a prompt tone, it indicates low battery level and please use it after fully charged. 1. Insert USB charging cable into USB port of standard power source. 2. Connect USB charging cable to microUSB charging port on the USB charging cable *1PCS 3.5mm audio cable*1 PCS headphone. 3. Charging time: about 4 hours for a full charging Red light steady lit = charging Red light off = fully charged Operation instructions I. Illustrations NC 5 6 7 Touch control illustration 1. Turn ON/OFF noise cancelling 2. Multi-function key 3. Indicator 4. Touch screen 5. microUSB charging port 6. Charging indicator 7. 3.5mm connector 1 2 4 3 Press twice Pause/play Answer/reject call Slide upward Slide downward Volume up Volume down Slide right Slide left Next track Previous track 2 Fully charged Low battery level Warning: The rechargeable batteries that provide power for this product must be disposed properly for recycling. Do not dispose of batteries in fire to prevent an explosion. How to operate the headphone I. Power ON/OFF Function Power ON Power OFF Operation Press and hold the multi-function key for 3 seconds Press and hold the multi-function key for 3 seconds Indicator Blue light constantly lit for 1 second Red light constantly lit for 1 second II. Turn ON/OFF noise cancelling Function Turn on noise cancelling Turn off noise cancelling Operation Slide toggle switch to ON Slide toggle switch to OFF 3 3 1. Bluetooth connection Before using, please follow the steps below to pair the headphone with mobile phone:
Keep the headphone and the mobile phone within 1 meter, the closer the better. Turn on the headphone, press and hold the multi-function key for 5 seconds to let the headphone enter pairing mode, red and blue indicator blinks alternately. Enable Bluetooth function of the mobile phone to search for and connect to EDIFIER W860NB; After successfully connecting there will be a prompt tone and blue indicator will blink slowly. Note:
When pairing, if fail to pair within 3 minutes it will automatically exit pairing mode;
Pin code for connection is 0000 if needed;
After pairing is complete, the headphone and the mobile phone will remember each other, and the headphone will automatically connect to the last connected device when powered on next time. 2. NFC connection For initial pairing, please enable Bluetooth function of the headphone and press multi-function key to put the headphone into pairing mode, Let NFC area of your mobile phone touch NFC area of the headphone, then W860NB will automatically pair and connect with the mobile phone. For a mobile phone paired previously, just turn on the headphone and place the mobile phone near NFC area of the headphone, then W860NB will automatically pair and connect with the phone (whether Bluetooth function of the mobile phone is enabled). Note:
Please ensure your Bluetooth mobile phone support NFC connection and this function is enabled. When mobile phone is in sleep mode or under lock screen, it cannot pair with the headphone via NFC connection. For initial pairing, let mobile phone touch NC NFC W860NB for a long time and take away mobile phone until W860NB enter pairing mode. When unconnected with device, enable NFC function can make connection; when connected with device, enable NFC function can disconnect the device. 4 4 3. Connect two Bluetooth devices simultaneously 2.Make three way call Pair the headphone with the first Bluetooth device. Turn off the headphone, then press and hold the multi-function key to restart the headphone to enter pairing mode and pair with the second Bluetooth device. Operate the first Bluetooth device to connect the headphone, and it completes to connect two Bluetooth devices simultaneously. Note: When the two Bluetooth devices are different operational systems
(i.e. one Android and one iOS), some operations may be delayed (i.e. Pause music playing in A phone and play music in B phone at the same time ). IV. Calling 1. Basic call operation (touch screen operation) Function Answer incoming call Reject incoming call Cancel call Increase volume Decrease volume Talking transferred to mobile phone Talking transferred to headphone Headphone status Incoming call ringing Incoming call ringing Talking Talking Talking Talking
(headphone) Talking
(mobile phone) Operation Double press touch screen Click and press and hold touch screen for 2 seconds Double press touch screen Slide touch screen upward slowly Slide touch screen downward slowly Click and press and hold touch screen for 2 seconds Click and press and hold touch screen for 2 seconds Basic call operation (multi-function key operation) Function Answer incoming call Reject incoming call Cancel call Talking transferred to mobile phone Talking transferred to headphone Last call redial Voice dial Headphone status Incoming call ringing Incoming call ringing Talking Talking
(headphone) Talking
(mobile phone) Connected to device Connected to device Operation Press multi-function key Press and hold multi-function key for 2 seconds Press multi-function key Press and hold multi-function key for 2 seconds Press and hold multi-function key for 2 seconds Double Press multi-function key Press and hold multi-function key for 2 seconds Function End the current call to answer the new incoming call Remain the current call to answer the new incoming call Call switching End current call Headphone status There is the second incoming call There is the second incoming call Talking Talking Operation Press multi-function key once Press multi-function key twice Double press multi-function key Press multi-function key once 3. Connect call between two mobile phones Function End the first mobiles call, connect the second mobiles incoming call Remain the first mobiles call, connect the second mobiles incoming call Headphone status The first mobile is talking, the second mobile having incoming call The first mobile is talking, the second mobile having incoming call Switch calls Talking, a call is remained End the current call, Return to the remained mobile Talking, a call is remained Operation Press multi-function key once Double press multi-function key Double press multi-function key Press multi-function key once V. Play music 1. Bluetooth mode When the headphone is connected with mobile phone supporting Qualcomm aptX technology, you can enjoy wireless music via headphone. Function Increase volume Decrease volume Previous track Next track Pause playing Resume playing Headphone status Play music Play music Play music Play music Play music Pause playing Operation Slide touch screen upward slowly Slide touch screen downward slowly Slide touch screen left rapidly Slide touch screen right rapidly Double press touch screen Double press touch screen Note:
When the volume is set at the maximum level, there will be a prompt tone. 2. AUX mode W860NB supports AUX input; connect the headphone to music player using 3.5mm audio cable and listen to music. Note:
When 3.5mm audio cable is plugged in, the headphone will turn off and automatically disconnect Bluetooth. AUX input is enabled, and can not control volume via buttons on the headphone. To use Bluetooth function, please unplug 3.5mm audio cable and power on the headphone again to pair. Maintenance Do not place the product near damp places to avoid affecting internal circuit. Do not place the product near places exposed to sun or in high temperature. High temperature will shorten service life of electronic components, damage battery and deform plastic components. Do not place the product in cold places to avoid damaging internal circuit board. Do not dismantle the product. Non-professional personnel may damage the product. Do not drop, vibrate strongly, strike the product with hard object to avoid damaging internal circuit. Do not use drastic chemicals or cleaner to clean the headphones. Do not use sharp objects to scratch product to avoid damaging outer shell and affecting looking. If the product cannot operate properly, please send it to local qualified maintenance agency for repair. FAQs 1. Red light instead of blue light flashes. Answer: It means that the headphone is in low battery level, please recharge the headphone. 2. Red light is off during charging. Answer: a. Please ensure the charging device is correctly connected with the headphone. b. When the headphone is not used for long periods of time, the battery will enter sleep state, it needs to charge about 30 minutes and then the red light will be lit. 3. There is no sound from the headphone. Answer: a. Check if the headphone is operating. b. Check if the headphone volume is at an appropriate level. c. Check if the headphone is correctly connected with mobile phone. d. Check if the headphone is operated within an effective distance. 4. The headphone calling effect is bad. Answer: a. Check if mobile phone is in an area with strong signal. b. Please ensure the headphone is within effective distance (10m ) and no obstacle between the headphone and mobile phone. 5. When playing music, unable to control pause/play/music via headphone. Answer: Please ensure the paired device support AVRCP (Audio/Video Remote Control Profile) profile. 6. It cannot use NFC to pair and connect. Answer: a. Make sure NFC function of mobile phone has been enabled. b. For initial pairing, let mobile phone touch the headphone for about 3 seconds and take away mobile phone until red and blue light blinks alternately, otherwise the pairing may be unsuccessful. CAUTION EN War ning!
To guarantee your personal safety, please do not wear or keep earphones in the vicinity (closer than 10cm) of a pacemaker. Do not insert plug into electric sockets. Supervise children when using the equipment, the product is not a toy. Earphone listening at high volume levels particularly, over extended periods of time may damage your hearing. The operation of switches on your hi-fi system or plugging in the earphones may cause clicks which at high volume setting may affect your hearing. Therefore, always set the volume control to minimum before switching between different sources (tuner, turntable, CD player, etc.) or plugging in the earphones. For traffic safety, do not use earphones while driving or cycling. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. A warning that batteries (battery pack or batteries installed) shall notbe exposed to excessive heat such as sunshine,fire or the like. 1. To prevent possible hearing damage, do not listen at high volume levels for long periods. 2. Fully understand user manual before use. 3. Ensure your player at low volume levels or power off before you leaving. Correct Disposal of this product. This marking indicates that this product should not be disposed with other household disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. 5 6 7 8 9 10 CN Conseils de Scurit!
FR
(10CM) Pour votre scurit, ne portez pas et ne posez pas ce casque proximit immdiate (moins de 10 cm) d'un pacemaker. Ne pas introduire la fiche jack dans des prises de courant. Surveillez vos enfants s'ils utilisent l'appareil. Ce produit n'est pas un jouet. Un casque d'coute utilis un volume lev risque de provoquer de troubles de l'audition, en particulier s'il est port de faon prolonge. Lorsque vous procdez un rglage sur votre installation hi-fi ou que vous branchez le casque sur l'installation, des bruits dangereux pour l'oreille peuvent se produire si le son est rgl sur un volume lev. Pour cette raison, il faut toujours mettre le son au minimum avant de passer d'une source l'autre (radio, platine, lecteur de CD ...) ou de brancher le casque. Pour ne pas mettre en danger votre scurit au volant ni celle des autres usagers de la route, n'utilisez jamais le casque lorsque vous conduisez ou que vous roulez vlo. IT Attenzione!
Al fine di garantire la sicurezza personale, fare attenzione che queste cuffie non siano posizionate in prossimit del proprio eventuale pace maker
(con una distanza inferiore a 10 cm). Non introdurre la spina jack in una presa sotto tensione. Sorvegliare i bambini quando utilizzano il dispositivo. Questo apparecchio non un giocattolo. L'utilizzo delle cuffie ad alto volume, soprattutto se prolungato, pu danneggiare l'udito. Maneggiare le manopole del Vostro sistema hi-fi o inserire le cuffie quando il volume troppo alto, potrebbe produrre dei rumori che potrebbero danneggiare l'udito, soprattutto se il volume alto. Si consiglia pertanto di regolare il volume al minimo prima di passare da una fonte all'altra (radio, giradischi, lettore CD, ecc.) o prima di collegare le cuffie. Peringatan!
ID Untuk menjamin keselamatan diri Anda, jangan memakai atau menyimpan earphone di sekitar
(dekat dari 10 cm) alat pacu jantung. Jangan masukkan steker ke stopkontak listrik. Awasi anak-anak saat menggunakan peralatan, produk ini bukan mainan. Mendengarkan earphone pada tingkat volume tinggi khususnya, selama waktu yang lama dapat merusak pendengaran Anda. Penggunaan sakelar pada sistem hi-fi Anda, atau penyumbatan pada earphone dapat menimbulkan klik yang pada pengaturan volume tinggi dapat memengaruhi pendengaran Anda. Karena itu, selalu mengatur kontrol volume paling rendah sebelum beralih di antara berbagai sumber
(penala, pemutar piringan hitam, pemutar CD, dll) atau penyumbatan pada earphone. Per la sicurezza nel traffico, si prega di non usare mai le cuffie mentre si guida o si va in bicicletta. Untuk keselamatan lalu lintas, jangan gunakan earphone selama mengemudi atau berkendara. NL Waarschuwing!
Om uw persoonlijke veiligheid te garanderen, dient de koptelefoon niet te worden bewaard of gedragen in de buurt van (minder dan 10 cm) een pacemaker. Steek de stekker in een stopcontact. Houd toezicht op kinderen tijdens het gebruik van het apparaat; dit product is geen speelgoed. Luisteren met de koptelefoon op hoog volume met name gedurende een langere periode kan leiden tot schade aan uw gehoor. De bediening van de schakelaars op uw hifisysteem of het insteken van uw koptelefoon kan leiden tot harde klikgeluiden wat uw gehoor kan aantasten. Om deze reden dient de volumeknop altijd op een minimum te worden geschakeld, voordat er tussen de verschillende bronnen (tuner, draaitafel, cd-speler, enz.) wordt geschakeld of de koptelefoon wordt aangesloten. Met het oog op verkeersveiligheid dient de koptelefoon niet te worden gebruikt tijdens het rijden of fietsen. KR
!
,
(10cm ) . .
,
.
(, ,CD-...)
. 11 12 13 14 15 16 Sicherheitshinweis!
DE Atencin!
ES Um lhre persnliche Sicherheit zu garantieren, achten Sie bitte darauf, dass dieser Kopfhrer nicht in nchster Nhe
(nher als 10cm) zu lhrem. Herzschrittmacher getragen oder auf-bewahrt wird. Klinkenstecker nicht in stromfhrende Buchsen einfhren. Beaufsichtigen Sie ihre Kinder bei der Benutzung des Gerts. Das Produkt ist kein Spielzeug. Die Verwendung von Kopfhrern kann bei groer Lautstrke vor allem im Dauerbetrieb zur Schdigung des Gehrs fhren. Bei Umschaltvorgngen an lhrer HiFi-Anlage oder bei Anschluss des Kopfhrers an die Anlage knnen Knackgerusche auftreten, die bei hoher Lautstrke das Gehr beeintrchtigen.Drehen Sie daher den Lautstrkeregler immer auf Minimum, wenn Sie an lhrer HiFi-Anlage zwischen verschiedenen Quellen (Radio, Plattenspieler, CD-Player ) whlen oder den Kopfhrer anschlieen. Um lhre Fahrtchtigkeit und die Sicherheit anderer Verkehrsteilnehmer nicht zu gefhrden, verwenden Sie Kopfhrer keinesfalls beim Lenken eines Kfz oder beim Radfahren. Por su propia seguridad, procure no llevar ni guardar estos auriculares muy cerca de su marcapasos (a menos de 10cm). No introducir el conector Jack en los casquillos conductores de corriente. Vigile a sus hijos al utilizar el equipo. Este producto no es un juguete. La utilizacin de auriculares a un volumen muy alto sobre todo al utilizarlos durante largos perodos puede conducir al deterioro del odo. Al operar los interruptores de su sistema HiFi o al conectar los auriculares al sistema puede hacer clic, lo que a un volumen muy alto puede deteriorar el odo. Por lo tanto disminuya el nivel de volumen al mnimo al seleccionar entre diferentes fuentes (radio, tocadiscos, reproductor de CD ...) en su sistema HiFi o al conectar los auriculares. Para no poner en peligro ni su capacidad de conducir, ni la seguridad de otros usuarios de la va pblica, no utilice en ningn caso sus auriculares al conducir un vehculo o al andar en bicicleta. RU
)++!
( 10 ) .
, .
, ,
.
,
.
,
,
(, , CD- ..)
. SA
!
!
)
(
10
.
)
(
.
---(10cm
) HiFi HiFi-CD
. Ostrzeenie!
PL Aby zapewni sobie bezpieczestwo, nie naley nosi ani trzyma suchawek w pobliu (w odlegoci mniejszej ni 10cm) od rozrusznika serca. Nie wkada wtyczki do gniazdka elektrycznego. Nadzorowa dzieci podczas korzystania ze sprztu, produkt to nie zabawka. Suchanie w suchawkach przy wysokich poziomach gonoci, szczeglnie przez dugie okresy czasu, moe spowodowa uszkodzenie suchu. Dziaanie przecznikw w systemie hi-fi lub podczanie suchawek mog powodowa mocne impulsy dwikowe, ktre przy duej gonoci mog powodowa pogorszenie suchu. Dlatego naley zawsze ustawia gono na minimalnym poziomie przed przeczaniem midzy rnymi rdami dwiku (tunerem, gramofonem, odtwarzaczem CD itp.) lub podczeniem suchawek. Dla zachowania bezpieczestwa jazdy nie naley uywa suchawek podczas prowadzenia samochodu czy jazdy na rowerze. 17 18 19 20 21 22 Advarsel!
DK For at garantere din personlige sikkerhed, skal du ikke bre eller holde hovedtelefonerne i nrheden (tttere end 10 cm) af en pacemaker. Indst ikke stikket i stikkontakter. Overvge brn ved brug af udstyr, produktet er ikke legetj. Hovedtelefon lytte ved hje lydstyrker Navnlig glder over lngere perioder - kan hreskader. Driften af kontakter p din hi-fi-system eller tilslutte hovedtelefonerne kan forrsage klik der p volumen indstilling hjt kan pvirke hrelsen. Derfor altid indstiller lydstyrken til minimum, fr der skiftes mellem forskellige kilder (tuner, pladespiller, CD-afspiller, etc.) eller tilslutte hovedtelefonerne. For trafiksikkerheden, ikke anvendes under krsel eller cykling. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. IC Caution The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation estautorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareildoit accepter tout brouillageradiolectrique subi, mmesi le brouillage est susceptible d'en compromettre le fonctionnement. IB-200-000000-08 23