|
app
s
|
Applicant Information
|
|
|
1 2
|
Effective |
2020-02-14
|
|
1 2
|
2019-11-06
|
|
1 2
|
Applicant's complete, legal business name |
Electronic Minds Group SPA
|
|
1 2
|
FCC Registration Number (FRN) |
0027593581
|
|
1 2
|
Physical Address |
Av. del Parque 5339, Office 112 Ciudad Empresarial, Huechuraba
|
|
1 2
|
Av. del Parque 5339, Office 112
|
|
1 2
|
Santiago, N/A
|
|
1 2
|
Chile
|
|
|
app
s
|
TCB Information
|
|
1 2
|
TCB Application Email Address |
t******@siemic.com
|
|
1 2
|
TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
|
app
s
|
FCC ID
|
|
1 2
|
Grantee Code |
2AP3N
|
|
1 2
|
Equipment Product Code |
2019EMDMVL
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2
|
Name |
J****** M**** F******
|
|
1 2
|
Title |
Product Engineer
|
|
1 2
|
Telephone Number |
+1 (3********
|
|
1 2
|
Fax Number |
+56 2********
|
|
1 2
|
E-mail |
j******@e-mindsgroup.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 | Equipment Class | PCB - PCS Licensed Transmitter |
| 1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LTE Module |
| 1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 | Modular Equipment Type | Single Modular Approval |
| 1 2 | Purpose / Application is for | Class II Permissive Change |
| 1 2 | Change in Identification |
| 1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
| 1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 | Grant Comments | C2PC to operate simultaneously with Bluetooth 4.0 LE module (FCC ID: SQGBT850) and 2.4Ghz WiFi module (FCC ID: 2AATL-8112MET) in host model EMD-MVL-4G.
Original Grant Comment:
Change of ID from FCC ID: XMR201903EG25G
Single Modular Approval. Power listed is ERP for part 22 and part 27 below 1 GHz, EIRP for part 24 and part 27 above 1 GHz. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna installation and operating configurations of this transmitter, including any applicable source-based timeaveraging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20MHz bandwidth modes for LTE Band 2, 4 and 25; and LTE of 1.4 , 3, 5 and 10MHz bandwidth modes for LTE Band 5,12 and 26 (814-824MHz),LTE of 5, 10, 15 and 20MHz bandwidth modes for LTE Band 7, 38 and 41; LTE of 5 and 10 MHz bandwidth modes for LTE Band 13; LTE of 1.4, 3, 5,10 and 15MHz bandwidth mode for LTE Band 26(824-849MHz).
The allowed maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed: 8dBi in WCDMA Band 2/LTE Band 2/7/25/38/41; 5dBi in WCDMA /LTE Band 4, and 8.6dBi in GSM850;10.19dBi in PCS1900; 9.42dBi in WCDMA Band 5; 9.41dBi in LTE Band 5; 8.7dBi in LTE Band 12; 9.16dBi in LTE Band 13; 9.36dBi in LTE Band 26(814-824); 9.41dBi in LTE Band 26(824-849).
This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. |
| 1 2 | Change of ID from FCC ID: XMR201903EG25G
Single Modular Approval. Power listed is ERP for part 22 and part 27 below 1 GHz, EIRP for part 24 and part 27 above 1 GHz. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna installation and operating configurations of this transmitter, including any applicable source-based timeaveraging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20MHz bandwidth modes for LTE Band 2, 4 and 25; and LTE of 1.4 , 3, 5 and 10MHz bandwidth modes for LTE Band 5,12 and 26 (814-824MHz),LTE of 5, 10, 15 and 20MHz bandwidth modes for LTE Band 7, 38 and 41; LTE of 5 and 10 MHz bandwidth modes for LTE Band 13; LTE of 1.4, 3, 5,10 and 15MHz bandwidth mode for LTE Band 26(824-849MHz).
The allowed maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed: 8dBi in WCDMA Band 2/LTE Band 2/7/25/38/41; 5dBi in WCDMA /LTE Band 4, and 8.6dBi in GSM850;10.19dBi in PCS1900; 9.42dBi in WCDMA Band 5; 9.41dBi in LTE Band 5; 8.7dBi in LTE Band 12; 9.16dBi in LTE Band 13; 9.36dBi in LTE Band 26(814-824); 9.41dBi in LTE Band 26(824-849).
This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. |
| 1 2 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2
|
Firm Name |
Bureau Veritas Consumer Products Services, Inc.
|
|
1 2
|
SGS-CSTC Standards Technical Services Co., Ltd
|
|
1 2
|
Name |
L******** B******
|
|
1 2
|
K**** X******
|
|
1 2
|
Telephone Number |
408-5********
|
|
1 2
|
+86 (********
|
|
1 2
|
Fax Number |
408 5********
|
|
1 2
|
E-mail |
l******@siemic.com
|
|
1 2
|
K******@sgs.com
|
|