FOR ITEM:
VOB40071BT Specifications Bluetooth Specification: JL5.0 Bluetooth Range: Up to 33 feet (10 meters) LED Indicator Light Microphone Battery Type: 55mAh, 3.7V, Polymer Lithium lon Next Track/Volume +
Battery Charge Time: Approximately 2 Hours The Bluetooth word mark and Power/Play/Pause/Answer ge i ; logos are registered trademarks Play Time: Approximately 3 hours* owned by the Bluetooth SIG, Inc. Last Track/Volume - Charging Port and any use of such marks by Sakar
*Applicable at 50% of maximum volume. International is under license. Other Results will be lower when volume is higher. Ladle lal laa those of their respective owners. Charging e@ (red) = Charging Micro USB 1 oO (blue)}= Charging Complete Plug USB Plug 1. The included USB charging cable has 2. Insert the USB charging cables Micro 3. Insert the USB charging cable's standard 4. The LED indicator light turns red while the a Micro USB plug and a standard USB USB plug into the charging port on your USB plug into the USB port of a computer or earbuds are charging then turns blue once plug. earbuds. suitable USB charging adapter. charging is complete. Bluetooth Pairing Pairing Mode Paired YW Red & Blue Flashing LED Blue Slowly Flashing LED 0000000 @OO0O00C0C PRESS & HOLD 2-3 SEC 1. Press and hold the power button to 2. The LED indicator lights will alternately 3. Go to the Bluetooth settings menu on your 4. The LED indicator lights will slowly flash blue to power on your earbuds. flash red and blue to indicate that your phone. Make sure that Bluetooth is turned on. indicate that your earbuds are paired with earbuds are in pairing mode. Connect to the device listed as VOB40071BT. your phone. _PLAY/PAUSE P Il _ ANSWER/END CALL _ REJECT CALL l r c
{uuu 1. Press and hold the power button to 2.Press the PLAY/PAUSE button to play 3. Press the ANSWER button to answer or end 4. Press and hold the ANSWER button to reject power on or power off your earbuds. or pause a track. a phone call. a phone call. PRESS & HOLD 2-3 SEC Important Safety Precautions 1. READ ALL INSTRUCTIONS BEFORE USING YOUR EARBUDS. 2. Do not use your earbuds near water. Clean using a dry or slightly moist cloth. 3. Do not place your earbuds on any wet surfaces. 4. Do not allow children or the infirm to play with your earbuds without adult supervision. 5. Do not expose your earbuds to excessive heat, flames or fire. 6. Always press all buttons carefully. Do not manhandle your earbuds. 7. Do not use in extremely dry environments, as this can lead to static discharge during usage. 8. Do not expose your earbuds to temperatures above 40C. Keep out of direct sunlight. 9. Do not attempt to repair this product yourself. Contact a qualified service center if your earbuds are in need of service. 10. Do not drop, puncture or expose your earbuds to excessive trauma. 11. Your earbuds are not intended for commercial use. 12. Do not place near objects that generate a strong magnetic field. 13. Use only the supplied charging cables. Unplug this device when not in use for long periods of time or during lightning storms. 14. Use a soft cloth to clean your earbuds. Never use any harsh chemicals or detergents. Make sure your earbuds are dry before charging. 15. Please recycle or dispose of your earbuds properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufacturer of your earbuds for further information. Controlling Music NEXT TRACK PPI LAST TRACK 144
Tap the Next Track Button to Tap the Last Track Button to advance to the next track in a return to the last track in a playlist. playlist. VOLUME + 4+ VOLUME - 4-
Press and hold the Volume + Press and hold the Volume -
Button to increase the volume. Button to decrease the volume. Vivitar One Year Warranty This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail fo function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. What Is Not Covered by Warranty Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modification or accident. To Obtain Warranty Service and Troubleshooting Information:
Call 1-800-592-9541 in the U.S. or visit our website at www.vivitar.com. To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the product is within the applicable Warranty period(s), MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired. FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two. conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sakar International is under license. Other trademarks and trade names are those of their respective owners.