FCC ID: Z9E-EW5270UM 802.11ac/b/g/n 2x2 MIMO / USB 3.0 Module

by: Embedded Works Corporation latest update: 2016-12-30 model: EW5270UM

Two grants have been issued under this FCC ID on 12/30/2016 (this is one of two releases in 2016 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked instructions, drivers, warrantee terms, password defaults, & troubleshooting guides.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Replacement

on Amazon

Trade-in? Recycling locations

eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 13
1 ~ 2016-12-30 11
2 ~ 2016-12-30 11

app s				submitted / available
1 2	User Manual	Users Manual	pdf	200.29 KiB
1 2		Cover Letter(s)	pdf
1 2		Cover Letter(s)	pdf
1 2		External Photos	pdf
1 2		Internal Photos	pdf
1 2		ID Label/Location Info	pdf
1 2		RF Exposure Info	pdf
1 2		Cover Letter(s)	pdf
1 2		Cover Letter(s)	pdf
1 2		Test Report	pdf
1 2		Test Setup Photos	pdf
1 2		Test Report	pdf
1 2		Test Setup Photos	pdf

exhibit
download
text

1 2

User Manual

Users Manual

pdf

200.29 KiB

Embedded Works 2T2R 802.11b/g/n/ac Module EW5270UM Users Manual FCC Statement:

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

(2) received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator &

your body. IMPORTANT NOTE:

This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. USERS MANUAL OF THE END PRODUCT:

In the users manual of the end product, the end user has to be informed to keep at least 20 cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the labelling area is small than the palm of the hand, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT:

The final end product must be labeled in a visible area with the following " Contains TX FCC ID:

Z9E-EW5270UM ". If the labelling area is larger than the palm of the hand, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Antenna Information:

Ant. Brand Model Name

(Part Number) Antenna Type Connector Gain (dBi) 2.4GHz 5GHz 1 AIR802 ANRD245X05 2 taoglas GW.71.5153 Dipole Antenna Dipole Antenna RP-SMA 5 5 RP-SMA 3.8 5.5 True Gain (dBi) 2.4GHz 5GHz 4.6 4.6 3.4 5.1 Cable loss 0.4

(Black cable) 0.4

(Rose gold cable) Note: The Printed Antenna of the EUT wasn't used. Chain 1 connect to Ant.1 or Ant. 2, Chain 2 connect to Ant.1 or Ant. 2. When module is put into the host , the host complying with FCC part 15 B with all function operated should be verified by host manufacturers. Host manufacturers should test fundamental and spurious to make sure spurious with radio operated still comply with FCC regulation rule in FCC part 15 C & 15E. All functions should be operated simultaneously including radio in the host to make sure radio module does not affect other functions. The host manufacture must evaluate the installed module for coupling when nearby traces use clocks above 2500 MHz. The host manufacture, when testing for 15B emissions, should install the module and operate it normally, then observe for any signals over the 15B limits that are not associated with the fundamental of the module or its harmonics to check for coupling. Chapter 1:

Introduction Description The EW5270UM is an 802.11ac/b/g/n 2.4G+5G USB module and supports 2T2R technology, which runs up to 866Mbps. Optimized RF architecture and baseband algorithms provide superb performance and low power consumption. EW5270UM is ideal for high throughput networking and multimedia application that requires better Wi-Fi performance. Features Standard: 802.11ac/b/g/n USB2.0 support for date rates up to 12Mbps full speed and 480Mbps high speed Enterprise level security supporting: WEP, WPA, WPA2 Support Wi-Fi Direct Wake on WLAN Conforms to EN300328 V1.8.1(2012.08)

- 1 -

Chapter 2: Installation For Windows 7 Install Software Note:

Do not insert the Wireless USB module into the computer until the InstallShield Wizard finished installing. 1. Exit all Windows programs. Insert the included Installation CD into the computer. The CD-ROM will run automatically. Please click Next to process the installation.

- 2 -

2. When prompt to the following message, please click Install to begin the installation 3. When the following screen appears, click Finish to restart the computer to complete the software installation.

- 3 -

Install Hardware Note:

Insert the Wireless USB module when finished software installation. Insert the Wireless USB module into the USB Port of the computer. The system will automatically detect the new hardware. Verification To verify the device is active in the computer. Go to Start > Control Panel > Device Manager. Expand the Network module category. If the 802.11a/n/b/g/ac 2cm Wireless LAN USB2.0 module is listed here, it means that the device is properly installed and enabled.

- 4 -

- 5 -

		frequency	equipment class	purpose
1	2016-12-30	2412 ~ 2462	DTS - Digital Transmission System	Original Equipment
2		5745 ~ 5825	NII - Unlicensed National Information Infrastructure TX

Application Forms

app s	Applicant Information
1 2	Effective	2016-12-30
1 2	Applicant's complete, legal business name	Embedded Works Corporation
1 2	FCC Registration Number (FRN)	0021277058
1 2	Physical Address	2855 Kifer Rd. Suite 100
1 2		Santa Clara, California 95051
1 2		United States

app s	TCB Information
1 2	TCB Application Email Address	T******@TIMCOENGR.COM
1 2	TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques

app s	FCC ID
1 2	Grantee Code	Z9E
1 2	Equipment Product Code	EW5270UM

app s	Person at the applicant's address to receive grant or for contact
1 2	Name	A** D**
1 2	Title	President
1 2	Telephone Number	888.9********
1 2	Fax Number	408.6********
1 2	E-mail	a******@embeddedworks.net

app s	Technical Contact
		n/a

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1 2	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2	Is this application for software defined/cognitive radio authorization?	No
1 2	Equipment Class	DTS - Digital Transmission System
1 2	Equipment Class	NII - Unlicensed National Information Infrastructure TX
1 2	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	802.11ac/b/g/n 2x2 MIMO / USB 3.0 Module
1 2	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2	Modular Equipment Type	Single Modular Approval
1 2	Purpose / Application is for	Original Equipment
1 2	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	Yes
1 2	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2	Grant Comments	Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as shown in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The host manufacture must evaluate the installed module for coupling when nearby traces use clocks above 2500 MHz. The host manufacture, when testing for 15B emissions, should install the module and operate it normally, then observe for any signals over the 15B limits that are not associated with the fundamental of the module or its harmonics to check for coupling. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes.
1 2	Grant Comments	Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as shown in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The host manufacture must evaluate the installed module for coupling when nearby traces use clocks above 2500 MHz. The host manufacture, when testing for 15B emissions, should install the module and operate it normally, then observe for any signals over the 15B limits that are not associated with the fundamental of the module or its harmonics to check for coupling. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes.
1 2	Is there an equipment authorization waiver associated with this application?	No
1 2	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2	Firm Name	SPORTON International Inc.
1 2	Name	S****** J****
1 2	Telephone Number	886-3******** Extension:
1 2	Fax Number	886-3********
1 2	E-mail	s******@sporton.com.tw

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15C	CC MO	2412.00000000	2462.00000000	0.2020000
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	15E	38 CC MO	5180	5240	0.207
2	2	15E	38 CC MO	5745	5825	0.174

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details