gemersor. SmartSet Clock Radio, With Auto-Date-Time Setting System, 1.4"Blue Jumbo Display, Dual Alarm, FM Radio, USB Charge Out, LED Decor and Bluetooth Speaker
(SmartSet Patent No. 6,567,344) OWNER'S MANUAL CKS1507 me Oo) Visit our website at www.emersonradio.com i WARNING TO PREVENT FIRE OR SHOCK HAZARD , DO NOT USE THIS PLUG WITH AN EXTENSION CORD,RECEPTACLE OR OTHEROUTLET UNLESS THE BLADES CAN BE FULLY INSERTED AND THERE IS NO BLADE EXPOSURE .TO PREVENT FIRE OR SHOCK HAZARD , DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. POUR EVITER TOUT DANGER DE CHOC ELECTRIQUE, NE PAS RACCORDER AU SECTEUR TANT QUE LA GRILLE N'APAS ETE REMISE EN PLACE.POUR REDUIRE LE RISQUE DINCENDIE OU DE CHOC ELECTRIQUE, NE PAS EXPOSER CET APPAREIL SOUS LAPLUIE ET LHUMIDITE. A The lightning flash with arrow-
head symbol, within an equi-
lateral triangle is intended to CAUTION LIS gataa esa DO NOT OPEN ATTENTION RISQUE D ELECTROCUTION iran WARNING : SHOCK HAZARD - DONOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE-NEPASOWAR The exclamation point within an equilateral triangle is in-
lert th to th WARNING: TO REDUCE THE RISK OF tended to alert the user to alert the user to the presence : i ofuninsulated dangerous voltage ELECTRIC SHOOK DO NOT REMOVE the presence of important within the product's enclosure {COVER (ORBACK).NO USER SERVICEABLE | OPerating and maintenance Pp ron PARTS INSIDE REFER SERVICING TO | (servicing) instructions in that may pe of sufficient QUALIFIED SERVICE PERSONNEL. the literature accompany-
magnitude to constitute a ris : ; . of electric shock to persons. AVIS:RISQUE DE CHOC ing the appliance. ol This is CLASS Il apparatus with double insulation, and no protective earth provided. The Caution Marking and Rating plate are located at the bottom enclosure of the apparatus. Les marquages sont inscrits en arrire de lappareil. Les prcautions demploi sont inscrites en arrire de lappareil. 1 WARNING: SHOCK HAZARD - DO NOT OPEN AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR 2 Caution Marking and rating plate was located at rear enclosure of the app-
aratus.Avertissement La plaque signaltiqueestsitue a l'arrire del'appareil. 3 Attention should be drawn to the environmental aspects of batterydisposal;
il convient d'attirer l'attention sur les problmes d'environnement dus ala mise au dchet des piles;
4 Minimum distances 10cm around the apparatus for sufficient ventilation;
distance minimale 10cm autour de l'appareil pour une aration suffisante;
5 The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.;
il convient que l'aration ne soit pas gne par l'obstruction des ouvertures d'aration par des objets tels que journaux, nappes, rideaux, etc.;
6 Nonaked flame sources, such as lighted candles, should be placed on the apparatus; il convient de ne pas placer surl'appareil de sources de flammes nues, telles que desbougies allumes;
7 Theuse of apparatus in moderate climates. si l'appareil est destin a tre utilis sous un climat tempr et 8 To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. pour rduire le risque dincendie ou de choc lectrique, ne pas exposer cet appareil sous la pluie et Ihumidit. 9 WARNING Do not ingest the battery, Chemical Burn Hazard This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. AVERTISSEMENT Ne pas ingrer la pile, Danger de brdlure chimique
(La tlcommande fournie avec) Ce produit contient une pile bouton. Sila pile bouton est avale, elle peut provoquer de graves brdlures internes en 2 heures seulement et peut entrainer la mort. Conserver les piles neuves et uses hors de porte des enfants. Si le compartiment pile ne se ferme pas correctement, cesserd'utiliser le produit ettenir hors de porte des enfants.En cas de doute concernant le fait que les piles pourraient avoir t avales ou introduites dans une partie quelconque du corps, consulter immdiatement un mdecin. 10 When a plug on the unit is used as a disconnect device, this unit must remain readily accessible.lorsque une prise place sur l'appareil est utilise comme appareil de dconnexion,cet appareil doit demeurer aisment accessible;
11 The batteries (battery pack or batteries installed) shall not be exposed to exce-
ssive heat such as sunshine, fire or the like. les batteries(bloc de batteries ou batteries installes) ne doivent pas tre exposes a une chaleur excessive telle que celle dusoleil,d'unfeuou d'origine similaire. 12 ATTENTION Danger of explosion if the battery is not replaced correctly. Replace only with the same type orequivalent type. Danger d'explosion si la pile n'est pas remplace correctement. Ne remplacer que parle mme type ou un type quivalent. 13 The appliance must not be exposed to water dripping or splashing and that no objects filled with liquids such as vases should be placed on the appliance. appareil ne doit pas tre expos a des gouttements d'eau ou des clabous sures et de plus qu'aucun objet rempli de liquide tel que des vases ne doit 6tre plac surl'appareil.
[47] WARNING DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD WARNING Do not ingest the battery,Chemical Burn Hazard This product contains a coin/button cell battery. If the coin/button is swallowed,it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely,stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body,seek immediate medical attention. AVERTISSEMENT Ne pas ingrer la pile, Danger de brilure chimique Ce produit contient une pile bouton. Si la pile bouton est avale, elle peut provoquer de graves brilures internes en 2 heures seulement et peut entrainer la mort. Conserver les piles neuves et uses hors de porte des enfants. Si le compartiment pile ne se ferme pas correctement, cesser dutiliser le produit et tenir hors de porte des enfants. En cas de doute concernant le fait que les piles pourraient avoir t avales ou introduites dans une partie quelconque du corps, consulter immdiatement un mdecin. IC Warning:
This device complies with Industry Canada Licence-exempt RSS standard(s).Operation is subject to the following two conditions:(1)this device may not cause interference,and (2)this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1)l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fon ctionnement. RF warning statement:
The device has been evaluated tomeet general RF exposure requirement. Tomaintain compliance with RSS-102 Radio Frequency (RF) Exposure guidelines, this equipment should be installed andoperated with a minimumdistance of 20cmbetween the radiator and your body. le dispositif de a t valus a rpondre gnr al rf exposition exigence.pour maintenir laconformit avec les directives d'exposition du RSS-102 - Radio Frquence (RF), ce matriel doit tre install et exploit a une distance minimale de 20 cm entre le radiateur et votre corps. FCC Note:
FCC Part 15.19 Warning Statement THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTER-
FERENCE,AND(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUD-
ING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC Part 15.21 Warning Statement NOTE: THE GRANTEE IS NOT RESPONSIBLE FORANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE.SUCH MODIFICATIONS COULD VOID THE USERAUTHORITY TO OPERATE THE EQUIPMENT. FCC Part 15.105 Warning Statement Note:This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential install-
ation. This equipment generates ,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that inter-
ference will not occur in a particular installation . If this equipment does cause harmful interference to radio communications. However,there is no guarantee that interference to radio communication. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* consult the dealer or an experienced radio/TV technician for help. RF warning statement The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCCs RF exposure guidelines,this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. 2 Important Safety Instructions 1.) Read these instructions .Keep these instructions . Follow all instructions. Heed all warnings. 2.) Donotuse this apparatus near water. 3.) Clean only with dry cloth. 4.) Donot block any ventilation openings. Install in accordance with the manufacturer's instructions. 5.) Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus(including amplifiers) that produce heat. 6.) Donot defeat the safety purpose of the polarized or grounding-type plug.A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, ask an electrician to replace the obsolete outlet. 7.) Protect the power cord from being walked on or pinched particularly at plugs,convenience receptacles and the point where they exit from the apparatus. 8.) Only use attachments / accessories specified by the manufacturer. 9.) Unplug this apparatus during lightning storms or when unused for long periods of time. 10.) Refer all servicing to qualified service personnel. Servicing is requiredwhen the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,the apparatus has been exposed to rain or moisture,does not operate normally, or has been dropped. 11.) Use only with the cart, stand, tripod,bracket,or table specified by the manufacturer,orsold with the apparatus . When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over. wt 12.) The AC adapter must not be exposed to dripping orsplashing andno objects filled with liquids, such as vases, shall be placed on apparatus. 13.) The AC adapter is used as a disconnect device and it must remain readily accessible during intended use. In order to disconnect the apparatus from the AC power completely, the AC adapter must be removed from the AC outlet completely. 14.) The battery must not be exposed to excessive heat such as sunshine, fire, etc. CAUTION: Danger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent type. PRECAUTION: Danger dexplosion si les piles sont remplaces de facon incorrect. Remplacer les piles seulement par le mme type de pile ou
'quivalent.
) Important Notes Avoid installing this unit in places * Operate controls and switches exposed to direct sunlight or close to as described in the manual. heat radiating appliances such as: * Before turning on the power, electric heaters, on top of other stereo make certain that the AC equipment that radiates heat, places adapter is properly installed. lacking ventilation, dusty areas, places * When moving the set,be sure subject to constant vibration and/or to first disconnect the AC humid or moist areas. adapter. HA Preparation For Use Unpacking And Set Up
* Remove the radio from the carton and remove all packing material from the radio.Save the packing material,if possible,in case the radio ever needs to be serviced ortransported. The original carton and packing material is the only safeway to pack your radio to protect it from damage in transit. Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers from the back or bottom of the cabinet. Note the serial number on the bottom of your radio and write this number inthe space provided on the Warranty page of this manual. Place your radio on a level surface suchasa table,desk orshelf,convenient to an AC outlet, out of direct sunlight,and away from sources of excessheat, dirt,dust,moisture, humidity, or vibration. Unwind the Line cord connecting the AC adapter and extend it to its full length. The FM antenna is built in to this cord.It must be fully extended to provide the best FM reception. Protect Your Furniture This model is equipped with non-skid rubber 'feet'to prevent the product from moving when you operate the controls. These'feet'are made from non-
migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives,or cleaning sprays may cause the rubber 'feet' to soften, and leave marks ora rubber residue onthe furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self adhesive felt pads, available at hardware stores and home improvement centers everywhere,and apply these pads to the bottom of the rubber'feet'
before you place the product on fine wooden furniture. Power Source This radio is designed to operate on normal 120V 60HzAC power only.Donot attempt to operate the radio on any other power source. You could cause damage to the radio that is not covered by your warranty. This radio should be connected to anAC outlet that is always'live'. Do not connect it toanoutlet that is controlled by a wall switch. When the power to the radio is interrupted, the built in lithium battery takes over to maintain the time and alarm settings. To maximize the life of the lithium battery keep the radio connected to a'live AC outlet at all times.
) Package Contents
* CKS1507 Clock Radio x 1 * Owners Manual 6 Location Controls and Indicators FRONT PANEL LI mn E
6000 o_ MON TUE WED THU FRI SAT SUN (ml TOP PANEL
l
@@09 7 | /
[| am o~ CX 8 C 2) |gemesan OTS Ls 1. ALARM 1 Radio/Buzzer Indicators 14. VOLUME-(VOL-)/DOWN Button 2. AM Indicator ( On=AM, Off=PM) 15. SET/TUNE UP Button 3. AUX Indicator 16. SOURCE(FM,Bluetooth,AUX)Button 4. DAY of WEEK Indicators 17. VOLUME+(VOL+)/UP Button 5. LOW BATTERY Indicator 18. AC Adapter 6. MHZ (FM Radio ) Indicator 19. Adapters Cable(also acts as FM 7. BT (Bluetooth) Indicator Antenna) 8. ALARM 2 Radio/Buzzer Indicators 20. BACKUP BATTERY Holder 9. POWER ( On/Standby) Button 21. LED Decor On/Off Button 10. ALARM 1/STORE(FMstation) Button 22. USB Charge Out Port 11. SLEEP/TIME ZONE Button 23. AUX IN Jack 12. PAUSE/SNOOZE/DIMMER Button 24. ALARM 2/MEMORY (FM station) 13. SET/TUNE DOWN Buttons Button 25. TIME SET/BT PAIR/FM Frequency Display vf Setting the Time Zone Initial Default Setting at Clock Mode The first time you connect your new SmartSet clock radio to the AC outlet the internal computer will automatically set the time correctly for the Eastern Time Zone, which is the initial default setting. The display will scan for a few seconds and then show the correct Day and Time in the Eastern zone. If you live in the Eastern Time zone,there's nothing else to do. Your clock is set correctly and running. If you do not live in the Eastern Time zone you must change the default zone display to your own zone. You only do this one time and the SmartSet will remember the new default time zone setting and will always return to that setting after power interruption. There are 7 time zones programmed into your SmartSet clock radio as follows:
ZONE 01 - Atlantic Time ZONE 02 - Eastern Time (Default Setting) ZONE 03 - Central Time ZONE 04 - Mountain Time ZONE 05 - Pacific Time | ZONE 06 - Yukon Time ZONE 07 - Hawaiian Time 1.To display current time zone setting, press the SLEEP (TIME ZONE) button. 2.To adjust the time zone setting, press and hold the SLEEP button, and then press the 4 or Pl button until your desired time zone appears on the display, then release all the buttons. Note:Time Zone and Time Setting can only be adjusted in standby mode, where the function of Bluetooth, Radio and AUX are disabled (MHz, BT and AUX indicators are Off).
's) Setting the Time/Date IMPORTANT: Time/Date can only be checked or adjusted in Standby Mode. Checking the current Year, Date and Time:
To check the current settings of Year, Date and Time, press the TIME SET button repeatedly to display year, date and time in sequence. Manual Time Adjustments
@ Year >@ Date >@ Time
@pPress and hold the TIME SET button until the Year Display blinks, then release the button
@pPress the 4 or PI button to adjust the Year
@pPress the TIME SET button again, the Month Display will blink
@pPress the I or pI button to adjust the Month
(4.16 means April 16th)
@Press the TIME SET button again, the Date Display will blink culg
@press the I or PI button to adjust the Date ic JH
@Press the TIME SET button again, the Hour Display will blink
@press the I or PI button to adjust the Hour (AM indicator On=AM, Off=PM) pPress the TIME SET button again, the Minutes Display will blink
@Press the I< or >I button to adjust the Minutes
@Press the TIME SET button again to finish this time adjustment process, or left idle for 5 seconds to restore clock on display.