FCC ID: 2ALCVER100301 SmartSet Bluetooth Clock Radio

gemersor. SmartSet Clock Radio, With Auto-Time Setting System, 1.4" Cyan Jumbo Display, Dual Alarms, FM Radio, 2.1A USB Charge Out, Night Light and Bluetooth V4.1 Speaker

(SmartSet Patent No. 6,567,344) OWNER'S MANUAL ER100301 Visit our website at www.emersonradio.com i WARNING TO PREVENT FIRE OR SHOCK HAZARD , DO NOT USE THIS PLUG WITH AN EXTENSION CORD,RECEPTACLE OR OTHEROUTLET UNLESS THE BLADES CAN BE FULLY INSERTED AND THERE IS NO BLADE EXPOSURE .TO PREVENT FIRE OR SHOCK HAZARD , DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

() () RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrow- |] WARNING: TO REDUCE THE | The exclamation point within head symbol, within an equi- | RISK OF ELECTRIC SHOCK] an equilateral triangle is in-

lateral triangle is intended to DO NOT REMOVE COVER | tended to alert the user to alert the usertothepresence (OR BACK) , NO USER| the presence of important within the product's enclosure SERVICEABLE PARTS INSIDE operating and maintenance ici instructions in that may be of sufficient} REFER SERVICING TO (servicing) ins magnitude to constitute arisk }QUALIFIED SERVICE he titerature accompany-

of electric shock to persons. | PERSONNEL. ing the appliance. ol This is CLASS Il apparatus with double insulation, and no protective earth provided. 1 WARNING: SHOCK HAZARD - DO NOT OPEN AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR 2 Caution Marking and rating plate was located at rear enclosure of the app-

aratus.Avertissement La plaque signaltiqueestsitue a l'arrire del'appareil. 3 Attention should be drawn to the environmental aspects of batterydisposal;

il convient d'attirer l'attention sur les problmes d'environnement dus ala mise au dchet des piles;

4 Minimum distances 10cm around the apparatus for sufficient ventilation;

distance minimale 10cm autour de l'appareil pour une aration suffisante;

5 The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.;

il convient que l'aration ne soit pas gne par l'obstruction des ouvertures d'aration par des objets tels que journaux, nappes, rideaux, etc.;

6 Nonaked flame sources, such as lighted candles, should be placed on the apparatus; il convient de ne pas placer surl'appareil de sources de flammes nues, telles que desbougies allumes;

7 Theuse of apparatus in moderate climates. si l'appareil est destin a tre utilis sous un climat tempr et 8 To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. pour rduire le risque dincendie ou de choc lectrique, ne pas exposer cet appareil sous la pluie et Ihumidit. 9 WARNING Do not ingest the battery, Chemical Burn Hazard This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.|If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. AVERTISSEMENT Ne pas ingrer la pile, Danger de brdlure chimique

(La tlcommande fournie avec) Ce produit contient une pile bouton. Sila pile bouton est avale, elle peut provoquer de graves brdlures internes en 2 heures seulement et peut entrainer la mort. Conserver les piles neuves et uses hors de porte des enfants. Si le compartiment pile ne se ferme pas correctement, cesserd'utiliser le produit ettenir hors de porte des enfants.En cas de doute concernant le fait que les piles pourraient avoir t avales ou introduites dans une partie quelconque du corps, consulter immdiatement un mdecin. 10 When a plug on the unit is used as a disconnect device, this unit must remain readily accessible.lorsque une prise place sur l'appareil est utilise comme appareil de dconnexion,cet appareil doit demeurer aisment accessible;

11 The batteries (battery pack or batteries installed) shall not be exposed to exce-

ssive heat such as sunshine, fire or the like. les batteries(bloc de batteries ou batteries installes) ne doivent pas tre exposes a une chaleur excessive telle que celle dusoleil,d'unfeuou d'origine similaire. 12 ATTENTION Danger of explosion if the battery is not replaced correctly. Replace only with the same type orequivalent type Danger d'explosion si la pile n'est pas remplace correctement. Ne remplacer que parle mme type ou un type quivalent. 13 The appliance must not be exposed to water dripping or splashing and that no objects filled with liquids such as vases should be placed on the appliance. appareil ne doit pas tre expos a des gouttements d'eau ou des clabous sures et de plus qu'aucun objet rempli de li quide tel que des vases ne doit 6tre plac surl'appareil. IC Warning:

This device complies with Industry Canada Licence-exempt RSS standard(s).Operation is subject to the following two conditions:(1)this device may not cause interference,and (2)this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1)l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fon ctionnement. RF warning statement:

The device has been evaluated tomeet general RF exposure requirement. Tomaintain compliance with RSS -102 Radio Frequency (RF) Exposure guidelines, this equipment should be installed andoperated with a minimumdistance of 20cmbetween the radiator and your body. le dispositif de a t valus a rpondre gnr al rf exposition exigence.pour maintenir laconformit avec les directives d'exposition du RSS-102 - Radio Frquence (RF), ce matriel doit tre install et exploit a une distance minimale de 20 cm entre le radiateur et votre corps. FCC Note:

FCC Part 15.19 Warning Statement THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTER-

FERENCE,AND(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUD-

ING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC Part 15.21 Warning Statement NOTE: THE GRANTEE IS NOT RESPONSIBLE FORANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE.SUCH MODIFICATIONS COULD VOID THE USERAUTHORITY TO OPERATE THE EQUIPMENT. FCC Part 15.105 Warning Statement Note:This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential install-

ation. This equipment generates , uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However,there is no guarantee that inter-

ference will not occur in a particular installation. If this equipment does cause harmful interference to radio communications. However,there is no guarantee that interference to radio communication. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on ,the user is encouraged to try to correct the interference by one or more of the following measures:

* Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

* consult the dealer or an experienced radio/TV technician for help. RF warning statement The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCCs RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. 2 Important Safety Instructions 1.) Read these instructions . Keep these instructions . Follow all instructions. Heed all warnings. 2.) Donotuse this apparatus near water. 3.) Clean only with dry cloth. 4.) Donot block any ventilation openings. Install in accordance with the manufacturer's instructions. 5.) Donotinstall near any heat sources such as radiators, heaters, stoves, or other apparatus(including amplifiers) that produce heat. 6.) Donot defeat the safety purpose of the polarized or grounding-type plug.A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, ask an electrician to replace the obsolete outlet. 7.) Protect the power cord from being walked on or pinched particularly at plugs,convenience receptacles and the point where they exit from the apparatus. 8.) Only use attachments / accessories specified by the manufacturer. 9.) Unplug this apparatus during lightning storms or when unused for long periods of time. 10.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,the apparatus has been exposed to rain or moisture,does not operate normally, or has been dropped. 11.) Use only with the cart, stand, tripod, bracket,or table specified by the manufacturer,orsold with the apparatus . When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over. 12.) The AC adapter must not be exposed to dripping orsplashing and no objects filled with liquids, such as vases, shall be placed on apparatus. 13.) The AC adapter is used as a disconnect device and it must remain readily accessible during intended use. In order to disconnect the apparatus from the AC power completely, the AC adapter must be removed from the AC outlet completely. 14.) The battery must not be exposed to excessive heat such as sunshine, fire, etc. CAUTION: Danger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent type. i) Preparation For Use Unpacking And Set Up

* Remove the radio from the carton and remove all packing material from the radio.Save the packing material,if possible,in case the radio ever needs to be serviced ortransported. The original carton and packing material is the only safeway to pack your radio to protect it from damage in transit. Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers from the backor bottom of the cabinet. Note the serial number on the bottom of your radio and write this number inthe space provided on the Warranty page of this manual. Place your radio on a level surface suchasa table,desk orshelf, convenient to anAC outlet, out of direct sunlight,and away from sources of excessheat, dirt,dust,moisture, humidity, or vibration. Unwind the Line cord connecting the AC adapter and extend it to its full length. The FM antenna is built in to this cord.It must be fully extended to provide the best FM reception. Protect Your Furniture This model is equipped with non-skid rubber 'feet'to prevent the product from moving when you operate the controls. These'feet'are made from non-

migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives,or cleaning sprays may cause the rubber 'feet' to soften, and leave marks ora rubber residue onthe furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self adhesive felt pads, available at hardware stores and home improvement centers everywhere,and apply these pads to the bottom of the rubber'feet'

before you place the product on fine wooden furniture. Power Source This radio is designed to operate on normal 120V 60HzZAC power only.Donot attempt to operate the radio on any other power source. You could cause damage to the radio that is not covered by your warranty. This radio should be connected to anAC outlet that is always'live'. Do not connect it toanoutlet that is controlled by a wall switch. When the power to the radio is interrupted, the built in lithium battery takes over to maintain the time and alarm settings. To maximize the life of the lithium battery keep the radio connected to a'live AC outlet at all times. mA Important Notes

* Avoid installing this unit in places * Operate controls and switches exposed to direct sunlight or close to as described in the manual. heat radiating appliances such as: * Before turning on the power, electric heaters, on top of other stereo make certain that the AC equipment that radiates heat, places adapter is properly installed. lacking ventilation, dusty areas, places * When moving the set,be sure subject to constant vibration and/or to first disconnect the AC humid or moist areas. adapter. 5 Package Contents

* ER100301Clock Radio x 1 * Owners Manual 6 Location of Controls and Indicators FRONT PANEL

. ["- | mE

e ee

0090 e669 1. ALARM 1 Radio/Buzzer Indicators 14. VOLUME-DOWN Button 2. AM Indicator ( On=AM, Off=PM) 15. SET/TUNE UP Button 3. AUX Indicator 16. SOURCE(FM, Bluetooth,AUX)Button 4. DAY of WEEK Indicators 17. VOLUME+ UP Button 5. LOW BATTERY Indicator 18. AC Adapter 6. MHZ (FM Radio ) Indicator 19. FM Antenna(cable) 7. BT (Bluetooth) Indicator 20. BACKUP BATTERY Compartment 8. ALARM 2 Radio/Buzzer Indicators (located on back of unit) 9. POWER ( On/Standby) Button 21. Night Light On/Off Button 10. ALARM 1/STORE(FMstation) Button 22. USB Charge Out 11. SLEEP/TIME ZONE Button 23. AUX IN Jack 12. PAUSE/SNOOZE/DIMMER Button 24. ALARM 2/MEMORY(FM station) 13. SET/TUNE DOWN Buttons 25. TIME SET/FM Frequency Display 7 Setting the Time Zone Initial Default Setting at Clock Mode The first time you connect your new SmartSet clock radio to the AC outlet the internal computer will automatically set the time correctly for the Eastern Time Zone, which is the initial default setting. The display will scan for a few seconds and then show the correct Day and Time in the Eastern zone. If you live in the Eastern Time zone,there's nothing else to do. Your clock is set correctly and running. If you do not live in the Eastern Time zone you must change the default zone display to your own zone. You only do this one time and the SmartSet will remember the new default zone setting and will always return to that setting after power interruption. There are 7 time zones programmed into your SmartSet clock radio as follows:

ZONE 1 -Atlantic Time | ZONE 2 -Eastern Time (Default Setting) ZONE 3 -Central Time | ZONE 4 -Mountain Time ZONE 5 -Pacific Time ZONE 6 -Yukon Time ZONE 7 -Hawaiian Time @

Short press cl 0 Pet Press and hold Note:Time Zone and Time Setting can only be adjusted in standby mode, where the function of Radio ,Bluetooth,and AUX are disabled(Indicators of MHz, BTand AUXare OFF). 8 Setting the Time Year,Date and Time Display To display Year,Date and Time sequentially,short press ee Short press TIME SET once for each 4 rf CU ib Short press for Year(yyyy) I l G70 Ib ed Short press for Date(m_d) Manual Time Adjustments

@ Year >@ Date >@ Time

@Press and Hold TIME SET until the Year Display blinks. Then release the button.

@pPress I or PI to adjust Year Press TIME SET and the Month Display will blink

@press I or pt to adjust Month

@Press TIME SET and the Date Display will blink

@pPress I or bl to adjust Date

@Press TIME SET and the Hour Display will blink

@Press I or PI to adjust Hour Press TIME SET and the Minutes Display will blink

@Press I< or DI to adjust Minutes

@Press TIME SET to finish time adjustments session Note:To skip manual adjustments, keep it idle for 5 seconds to resume to clock display mode. ae o Down ue Short press for Time(hr mm)

cyan Note: If pairing unsuccessful, all previously paired Bluetooth devices around should be disconnected or turned off rst, in order to avoid making any auto reconnection between them. Then, set this unit to Bluetooth mode, and tap the Bluetooth switch on your phone/device off and back on again to refresh/

search any nearby "ER100" for pairing. If you want to disconnect this unit from your Bluetooth enabled device after pairing successful, press and hold the BT PAIR button for 2 sec. To reconnect this unit, just select "ER100" again from the Available/Paired device list. 1. The lithium backup battery needs replacement when the LOW BATTERY indicator ashes, otherwise, the time and alarm settings will be lost/reset after a power outage. 2. Leave the AC adapter connected to your AC outlet to retain memory while the original battery is removed. 3. Unscrew the battery holder from the cabinet with a small screwdriver and insert a new battery with the same CR2032 (3V) or equivalent type into the holder the same way, observing the positive (+) polarity before sliding the holder back into the slot. The LOW BATTERY indicator should then be Off. 20190625 2

Emerson Radio Corp. POWER OF ATTORNEY FCC ID: 2ALCVER100301 Date: 2019-11-28 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Services (ShenZhen) Co., Ltd.

(Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on 2020-11-27. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Emerson Radio Corp. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Emerson Radio Corp. Signature Brian Leung / Engineering Manager Typed name and Title

Emerson Radio Corp. Date: 2019-11-28 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2ALCVER100301 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Schematics Block Diagram Operational Description File Name ER100301_Schematics.pdf ER100301_Block Diagram.pdf ER100301_Operational Description.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Emerson Radio Corp. Signature Brian Leung / Engineering Manager Typed name and Title