Application iCtrl is an App on you cellphone which is used to control the opening/closing of sofa. And you also can use iCtrl system to pinpoint the most comfortable position in which you found and saved previously. Controller Control Box Actuator Power Supply Constitution:
iCtrl system is combined by: 1. Controller; 2. Control Box; 3. Actuator; 4. Power Supply 1.Controller: Use to control the chair open or close. 2.Control Box: Use to transform the signal from controller or smart device to the actuator. 3.Actuator: Make the chair open or close by extend or reducing. 4.Power Supply: To support the power for whole system. An Introduction to iCtrl iCtrl system is designed to improve the quality of life of our customers.If you have any opinions or suggestions about our products, please kindly log in to send your feedback. You may refer to the latest information published on our website. Product compatibility Demand for smart device:
www.iCtrl.hk Step 2: Turn on the Bluetooth Android device& iOS device:
Enter Settings and turn on Bluetooth. a) iPhone 4s iPhone 5 iPhone 5S; iPhone 5C iPod touch 5 iPad 3 iPad 4 iPad Mini iPad Air b) Andriod 2.2.3 or higher virson Quick Start Guide Carefully read all instructions before use, so that you can use this product correctly. Please keep this quick start guide for future reference. Step 1Download App Searching iCtrl in Apple store or Google play or visit www.ictrl.hk A v a i l a b l e o n t h e
. Step 3: Operating the App Tap the icon to select devices and operate. 1 2 The 6 devices recently connected will be shown here The nearby devices available for connection will be shown here Control Once the device is connected, the app will enter the next screen. Back Go back and then disconnect Directional keypad Tap to enter into Settings page Add new memory positions Rapid storage/
recover position Saved position, scroll up to display more 3 Memory Storage can be started after adding a position. Identify / Name a new memory positon Personalize You may name the device and positions enter into Settings and edit the your preferences. 4 Unable to connect the device:
FAQ
. A.If you cannot connect the device after the first installation, please restart the handheld device. B.iCtrl disconnects during operation and is unable to reconnect. 1. Check whether the device is connected with other handheld devices. 2. Restart iCtrl software. 3. Restart Bluetooth (Turn off Bluetooth and wait for 10 seconds until restart). 4. Restart the device. 5. Restart the handheld device. Memory position errors:
A. If power supply is cut off while the device is oper-
ating, there will be an error in memory positioning. B.The device works too freq-
uently. When it returns to memory position, the position appears as an error. Solution App until movement stops, and then the error will be resolved.
: Tap and hold the Down button in iCtrl Press this button to get the device back to its initial position Create a new position Please check whether Device control box C. No memory position function is available:
While turning on the Memory position, the device will stop running after working for some time without returning to "Memory position". Solution:
and Actuator / motor are properly connected (It is suggested to be done by professionals.). When power supply is cut off under proper connection of the handheld terminal and device, it is necessary to go through the following operation for reconnecting:
A: Turn off iCtrl software completely. B: Select Phone Settings Bluetooth Off. Sudden power failure:
5 Turn off Bluetooth 6
. If the APP prompts a notice of a weak signal 1. Move closer to the device if the distance is more than 5 meters(16 ft.). 2. There is metal obstructions between handheld intelligent terminal and device. C: Wait 10 seconds, then restart the device and iCtrl software. Restart iCtrl Then it will resume normal operation. Specifications Power input 100V~240V Power output 29V 2A Rated power 58W Bluetooth version 3.0 7 8 EMOMO TECHNOLOGY CO.,LTD