FCC ID: A8J-EAP600 Wireless-N 300+300Mbps Ceiling Mount Dual Band Concurrent AP

1 Wireless-N 300 + 300Mbps Long Range Ceiling Mount Dual Concurrent Access Point EAP600 Wireless-N 300 + 300Mbps Long Range Ceiling Mount Dual Concurrent Access Point V1.0 1 Table of Contents 1 1.1 1.2 1.3 1.4 Introduction ..................................................................................................................................................................4 Features and Benefits.............................................................................................................................................4 Package Contents...................................................................................................................................................5 System Requirements.............................................................................................................................................6 Applications.............................................................................................................................................................6 2 Before you Begin .........................................................................................................................................................9 2.1 Considerations for Wireless Installation ..................................................................................................................9 2.2 Computer Settings (in Windows XP/Windows 7) ..................................................................................................10 2.3 Computer Settings in Apple Mac OS X .................................................................................................................13 2.4 Hardware Installation ............................................................................................................................................14 3 Configuring Your Access Point.................................................................................................................................19 3.1 Default Settings.....................................................................................................................................................19 3.2 Web Configuration ................................................................................................................................................20 4 Building a Wireless Network .....................................................................................................................................22 Access Point Mode ...............................................................................................................................................22 4.1 4.2 WDS AP Mode......................................................................................................................................................23 4.3 WDS Bridge Mode ................................................................................................................................................24 4.4 Repeater mode .....................................................................................................................................................25 5 Status ..........................................................................................................................................................................26 5.1 Save/Reload .........................................................................................................................................................26 5.2 Main ......................................................................................................................................................................27 5.3 2.4G/5G Wireless Client List .................................................................................................................................30 2.4G/5G Connection Status ..................................................................................................................................31 5.4 2.4G/5G WDS Link List.........................................................................................................................................32 5.5 5.6 System Log ...........................................................................................................................................................33 6 System ........................................................................................................................................................................34 6.1 Operation Mode ....................................................................................................................................................34 2 7 6.2 6.3 IP Settings.............................................................................................................................................................35 Spanning Tree Setting ..........................................................................................................................................36 2.4G/5G Wireless........................................................................................................................................................38 7.1 Wireless Network ..................................................................................................................................................38 7.2 Wireless Security ..................................................................................................................................................45 7.3 Site Survey............................................................................................................................................................49 7.4 Wireless MAC Filtering..........................................................................................................................................53 7.5 Wireless Advanced ...............................................................................................................................................55 7.6 WPS (Wi-Fi Protected Setup) ...............................................................................................................................57 7.7 WDS Link Settings ................................................................................................................................................60 8 Management ...............................................................................................................................................................62 8.1 Administration .......................................................................................................................................................62 8.2 Management VLAN Settings.................................................................................................................................63 8.3 Wireless Traffic Shaping .......................................................................................................................................65 8.4 SNMP Settings......................................................................................................................................................66 Backup/Restore ....................................................................................................................................................68 8.5 Auto Reboot Settings ............................................................................................................................................69 8.6 8.7 Firmware Upgrade ................................................................................................................................................70 Time Setting..........................................................................................................................................................71 8.8 8.9 Log........................................................................................................................................................................72 8.10 Diagnostics ...........................................................................................................................................................73 8.11 LED Control ..........................................................................................................................................................74 8.12 Logout ...................................................................................................................................................................75 8.13 Reset.....................................................................................................................................................................76 Appendix A FCC Interference Statement......................................................................................................................77 Appendix B IC Interference Statement .........................................................................................................................78 Appendix C CE Interference Statement........................................................................................................................79 3 Revision History Version 1.0 Date 2012/07/30 Notes First Release 4 1 Introduction The EAP600 is a high-powered, long-range dual-band concurrent wireless 802.11a/b/g/n access point with four major functional modes. The EAP600 is designed to operate in numerous environments from large homes, small and medium-

sized businesses, multiple-floor offices, hotels and other venues to larger enterprise deployments. Its high-powered, long-

range characteristics make it a cost-effective alternative to ordinary access points that dont have the range and reach to connect to a growing number of wireless users who wish to connect to a large home or business network. The EAP600 supports the 2.4GHz frequency band under 802.11 b/g/n mode while at the same time providing 5GHz band for communicating or transferring files in a less congested network frequency band. The EAP600 delivers up to 6x faster wireless speeds and 7x extended coverage than legacy 802.11a/b/g wireless devices. Even though the EAP600 has been designed and engineered for traffic heavy and demanding business environments it is also quite at home in larger house scenarios because it efficiently extends the wireless range of an existing home router, especially in very architecturally-challenging structures to provide whole home connectivity. To protect sensitive data during wireless transmissions, the EAP600 offers different encryption settings for wireless transmissions including industry-standard WPA and WPA2 encryption. The EAP600 also includes MAC address filtering to allow network administrators to offer network access only to known computers and other devices based on their MAC addresses. 1.1 Features and Benefits Features Benefits High Speed Data Rate Up to 300 Mbps for each band (2.4GHz / 5GHz) 10/100/1000 Gigabit Ethernet Capable of handling heavy data payloads such as HD multimedia streaming. Support up to 1000Mbps wired networking speed. 5 IEEE 802.11n Compliant and Backwards Compatible with 802.11 a/b/g devices Multi-Function Support Multiple SSID in AP mode (up to 8 in each frequency band) Fully compatible with IEEE 802.11 a/b/g/n devices. Allowing users to select any one of the following modes: Access Point, WDS AP, WDS Bridge, and Repeater depending on their specific networking deployment need. Allow clients to access different networks through a single access point and assign different policies and functions for each SSID through the built in software. WPA/WPA2/IEEE 802.1x Support Powerful data security. MAC Address Filtering in AP Mode User Isolation Support (AP mode) Power-over-Ethernet (IEEE802.3at/af) Save User Settings SNMP Remote Configuration Management For more secure network connections with known users and devices. Offers an additional layer of protection within the network by isolating specific client users. Allows installers to deploy the access point in locations via a PoE connection (Ethernet cable) where a power outlet may not be available. Enables network administrators to save their device settings so firmware upgrades do not permanently delete previous device settings. Allows remote connection to configure or manage the EAP600 easily. QoS (WMM) support Prioritizes bandwidth-intensive and sensitive data traffic. 1.2 Package Contents The EAP600 package contains the following items (all items must be in package to issue a refund):

 EAP600 Access Point 6

 12V/2A 100V~240V Power Adapter

 RJ-45 Ethernet LAN Cable

 Wall Mount Kit: Mounting Bracket, Wall/Ceiling Mounting Hardware Kit, T-Rail Mounting Hardware Kit

 CD with User's Manual

 Quick Installation Guide 1.3 System Requirements The following are the Minimum System Requirements in order configure the device.

 Computer with an Ethernet interface or wireless network capability

 Windows OS (XP, Vista, 7), Mac OS, or Linux-based operating systems

 Web-Browsing Application (i.e.: Internet Explorer, Firefox, Safari, or another similar browser application) 1.4 Applications Wireless LAN (WLAN) products are easy to install and highly efficient. The following list describes some of the many applications made possible through the power and flexibility of WLANs:

a) Difficult-to-Wire Environments There are many situations where wires cannot be installed or deployed easily or cannot be hidden from view. Older buildings, sites with multiple buildings, and/or areas make the installation of a Ethernet-based LAN impossible, impractical or expensive. b) Temporary Workgroups Create temporary workgroups/networks in more open areas within a building auditoriums, amphitheater classrooms, ballrooms, arenas, exhibition centers, temporary offices where one wants either a permanent or temporary Wireless LAN established. c) The Ability to Access Real-Time Information Doctors/Nurses, Point-of-Sale Employees, and/or Warehouse Workers can access real-time information while dealing with patients, serving customers, and/or processing information. 7 d) Frequently Changing Environments Set up networks in environments that change frequently (i.e.: Show Rooms, Exhibits, etc.). e) Small Office and Home Office (SOHO) Networks SOHO users need a cost-effective, easy and quick installation of a small network. f) Wireless Extensions to Existing Ethernet-based Networks Devices like the EAP600 enable network administrators, installers and end-users to extend the range and reach of an existing Ethernet-based network. g) Training/Educational Facilities Training sites at corporations or students at universities use wireless connectivity to ease access to information, information exchanges, and learning. 9 2 Before you Begin This section will guide you through the installation process. Placement of the EnGenius EAP600 is essential to maximize the access points performance. Avoid placing the EAP600 in an enclosed space such as a closet, cabinet, or stairwell. 2.1 Considerations for Wireless Installation The operating distance of all wireless devices cannot be pre-determined due to a number of unknown obstacles in the environment that the device is deployed in. These could be the number, thickness, and location of walls, ceilings, or other objects that the EAP600s wireless signals must pass through. Here are some key guidelines to allow the EAP600 to have optimal wireless range.

 Keep the number of walls and/or ceilings between the EAP600 and other network devices to a minimum. Each wall and/or ceiling can reduce the signal strength, resulting in lower signal strength.

 Building materials makes a difference. A solid metal door and/or aluminum stubs may have a significant negative effect on the signal strength of the EAP600. Locate your wireless devices carefully so the signal can pass through a drywall and/or open doorways. Materials such as glass, steel, metal, concrete, water (example: fish tanks), mirrors, file cabinets and/or brick can also diminish wireless signal strength. Interference from your other electrical devices and/or appliances that generate RF noise can also diminish the EAP600s signal strength. The most common types of devices are microwaves or cordless phones.



10 2.2 Computer Settings (in Windows XP/Windows 7) In order to use the EAP600, you must first configure the TCP/IPv4 connection of your Windows OS computer system.

 Click Start button and open Control Panel. Windows XP Windows 7 11





In Windows XP, click Network Connections In Windows 7, click View Network Status and Tasks in the Network and Internet section, then select Change adapter settings

 Right click on Local Area Connection and select Properties

 Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties 12

 Select Use the following IP address and enter an IP address that is different from the EAP600 and subnet mask then click OK. Note: Ensure that the IP address and subnet mask are on the same subnet as the device. For example:

EAP600 IP address: 192.168.1.1 PC IP address: 192.168.1.2 192.168.1.255 PC subnet mask: 255.255.255.0 13 2.3 Computer Settings in Apple Mac OS X

 Go to System Preferences (can be opened in the Applications folder or selecting it in the Apple Menu)

 Select Network in the Internet & Network section

 Highlight Ethernet



 Enter an IP address that is different from the EAP600 and subnet mask then press OK Note: Ensure that the IP address and subnet mask are on the same subnet as the device. For example:

In Configure IPv4, select Manually EAP600 IP address: 192.168.1.1 PC IP address: 192.168.1.2 192.168.1.255 PC subnet mask: 255.255.255.0

 Click Apply when done. 14 2.4 Hardware Installation 1. Ensure that the computer in use has an Ethernet Controller (RJ-45 Ethernet Port). For more information, verify with your computers user manual. 2. Connect one end of the Category 5e Ethernet cable into the RJ-45 port of the EAP600 and the other end to the RJ-45 port of the computer. Ensure that the cable is securely connected to both the EAP600 and the computer. 3. Connect the Power Adapter DC connector to the DC-IN port of the EAP600 and the Power Adapter to an available electrical outlet. Once both connections are secure, verify the following:

a) Ensure that the POWER light is on (it will be orange). b) Ensure that the 2.4GHz/5GHz WLAN light is on (it will be green for 5G, blue for 2.4G). c) Ensure that the LAN (Computer/EAP600 Connection) light is on (it will be blue). d) Once all three lights are on, proceed to set up the access point using the computer. This diagram depicts the hardware configuration. Mounting the EAP600 Using the provided hardware, the EAP600 can be attached to a ceiling or wall. 15 To attach the EAP600 to a ceiling or wall using the mounting bracket:

1) Attach the mounting bracket to the wall or ceiling using the provided wall/ceiling mounting hardware kit. 2) Insert the provided short screws into the bottom cover of the EAP600. Leave enough of the screws exposed to ensure that the unit can be attached to the mounting bracket. If extra space is required, use the provided spacers and long screws from the T-Rail mounting hardware kit to increase the space between the unit and the mounting bracket. 3) Mount the EAP600 on the mounting bracket by rotating the unit clockwise about 90 degrees to secure it in place. To attach the EAP600 to a ceiling using the provided T-rail connectors:

16 1) Attach the T-rail connectors to the bottom cover of the EAP600 using the provided short screws. Two sizes of T-rail connectors are included in the mounting hardware kit: 15/16in (2.38cm) and 9/16in (1.43cm). If extra space is required to accommodate drop ceiling tiles, use the provided spacers and long screws. 2) Line up the connected T-rail connectors with an appropriately sized rail and press the unit onto the rail until it snaps into place. 17 Note: To protect your EAP600, use the Kensington security slot to attach a cable lock (cable lock is not included). 18 Front Panel Rear Panel One click for reset the device. Press over 10 seconds for reset to factory default. LED lights for WPS, WLAN 5G, WLAN 2.4G, Ethernet port and Power. Front Panel Reset Button LED Lights Rear Panel Power Ethernet Port Ceiling (Wall) Mount Hole Using the provided hardware, the EAP600 can be attached to a ceiling or wall. Kensington Security Slot To protect your EAP600, use the Kensington security slot to attach a cable lock. DC IN for Power. Ethernet port for RJ-45 cable. 19 3 Configuring Your Access Point This section will show you how to configure the device using the web-based configuration interface. 3.1 Default Settings Please use your Ethernet port or wireless network adapter to connect the Access Point. Default Settings IP Address Username / Password Operation Mode 192.168.1.1 admin / admin AP / AP 20 3.2 Web Configuration

 Open a web browser (Internet Explorer/Firefox/Safari) and enter the IP Address http://192.168.1.1 Note: If you have changed the default LAN IP Address of the Access Point, ensure you enter the correct IP Address.

 The default username and password are admin. Once you have entered the correct username and password, click the Login button to open the web-base configuration page.



If successful, you will be logging in and see the EAP600 User Menu. 21 22 4 Building a Wireless Network The EAP600 has the ability to operate in various modes. This chapter describes the operating modes of the EAP600. 4.1 Access Point Mode In Access Point Mode, EAP600 behaves likes a central connection for stations or clients that support IEEE 802.11a/b/g/n networks. The stations and clients must be configured to use the same SSID (Service Set Identifier) and security password to associate with the EAP600. The EAP600 supports up to eight SSIDs at the same time for secure access. 23 4.2 WDS AP Mode The EAP600 also supports WDS AP mode. This operating mode allows wireless connections to the EAP600 using WDS technology. In this mode, configure the MAC addresses in both Access Points to enlarge the wireless area by enabling WDS Link settings. WDS supports four AP MAC addresses. 24 4.3 WDS Bridge Mode In WDS Bridge Mode, the EAP600 can wirelessly connect different LANs by configuring the MAC address and security settings of each EAP600 device. Use this mode when two wired LANs located a small distance apart want to communicate with each other. The best solution is to use the EAP600 to wirelessly connect two wired LANs, as shown in the following figure. WDS Bridge Mode can establish four WDS links, creating a star-like network. Note: WDS Bridge Mode does not act as an Access Point. Access Points linked by WDS are using the same frequency channel. More Access Points connected together may lower throughput. This configuration can be susceptible to generate endless network loops in your network, so it is recommended to enable the Spanning Tree function to prevent this from happening. 25 4.4 Repeater mode The Repeater mode is used to regenerate or replicate signals from a wireless router or other access point/station that is unable to reach certain areas in a building. When this mode is activated in the EAP600, the EAP600 receives the wireless signal from an existing router or AP and relays it to other devices within its range so they can join the network. 26 5 Status The Status section contains the following options: Main, 2.4G/5G Wireless Client List, 2.4G/5G Connection Status, 2.4G/5G WDS Link List and System Log. The following sections describe these options. 5.1 Save/Reload This page lets you save and apply the settings shown under Unsaved changes list, or cancel the unsaved changes and revert them to the previous settings that were in effect. 27 5.2 Main Clicking the Main link under the Status menu or clicking Home at the top-right of the EAP600 Page shows the status information about the current operating mode.

- The System Information section shows general system information such as Device Name, MAC Address, Current Time, Firmware Version, and Management VLAN ID (Note: VLAN ID is only applicable in Access Point or WDS AP mode).

- The LAN Settings section shows the Local Area Network settings such as the LAN IP Address, Subnet Mask, and DNS Address. 28

- The Current 2.4G/5G Wireless Settings section shows wireless information such as Operating Mode, Frequency, and Channel. Since the EAP600 supports multiple-SSIDs, information about each SSID, the ESSID and security settings, are displayed (Note: Profile Settings is only applicable in Access Point, WDS AP). 29 30 5.3 2.4G/5G Wireless Client List Clicking the 2.4G/5G Wireless Client List link under the Status menu displays the list of clients associated to the EAP600s 2.4GHz/5GHz, along with the MAC addresses and signal strength for each client. Clicking Refresh updates the client list. Note: Only applicable in Access Point, WDS AP, and Repeater mode. 31 5.4 2.4G/5G Connection Status Click on the 2.4G/5G Connection Status link under the Status menu. This page displays the current status of the Network, including Network Type, SSID, BSSID, Connection Status, Wireless Mode, Current Channel, Security, Data Rate, Noise Level, and Signal Strength. Note: Only applicable in Repeater mode. 32 5.5 2.4G/5G WDS Link List Click on the 2.4G/5G WDS Link List link under the Status menu. This page displays the current status of the WDS link, including WDS Link ID, MAC Address, Link Status and RSSI. Note: Only applicable in WDS AP and WDS Bridge mode. 33 5.6 System Log The EAP600 automatically logs (records) events of possible interest in its internal memory. To view the logged information, click the System Log link under the Status menu. If there is not enough internal memory to log all events, older events are deleted from the log. When powered down or rebooted, the log will be cleared. Update the log. Clear the log. System Log Refresh Clear 34 6 System 6.1 Operation Mode The EAP600 supports four operating modes: Access Point, WDS AP, WDS Bridge, and Repeater. System Properties Device Name Enter a name for the device. The name you type appears in SNMP management. This name is not the SSID and is not broadcast to other devices. Use the radio button to select an operating mode. Operation Mode Save & Apply / Cancel Click Save & Apply to confirm the changes or Cancel to cancel and return previous settings. 35 IP Settings 6.2 This page allows you to modify the device's IP settings. Select whether the device IP address will use the static IP address specified in the IP Address field or be obtained automatically when the device connects to a DHCP server. The IP Address of this device. The IP Subnet Mask of this device. The Default Gateway of this device. Leave it blank if you are unsure of this setting. The primary / secondary DNS address for this device. IP Settings IP Network Setting IP Address IP Subnet Mask Default Gateway Primary / Secondary DNS 36 6.3 Spanning Tree Setting This page allows you to modify the Spanning Tree settings. Enabling Spanning Tree protocol will prevent network loops in your LAN network. Enable or disable the Spanning Tree function. Specify Bridge Hello Time, in seconds. This value determines how often the device sends handshake packets to communicate information about the topology throughout the entire Bridged Local Area Network. Specify Bridge Max Age, in seconds. If another bridge in the spanning tree does not send a hello packet for a long period of time, it is assumed to be dead. Specify Bridge Forward Delay, in seconds. Forwarding delay time is the time spent in each of the Listening and Learning states before the Forwarding state is entered. This delay is provided so that when a new bridge comes onto a busy network, it analyzes data traffic before participating. Specify the Priority Number. A smaller number has greater priority. Spanning Tree Spanning Tree Status Bridge Hello Time Bridge Max Age Bridge Forward Delay Priority 37 Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and return previous settings. 38 7 2.4G/5G Wireless 7.1 Wireless Network This page displays the current status of the Wireless settings of the EAP600. Access Point / WDS AP mode:

39 2.4G/5G Wireless Network (Access Point / WDS AP mode) Wireless Mode Channel HT Mode Wireless mode supports 802.11b/g/n mixed mode in 2.4G and 802.11a/n mixed mode in 5G. The default channel bandwidth is 20/40MHz. The larger the channel, the better the transmission quality and speed. Select upper or lower channel. Your selection may affect the Auto channel function. Select the channel and frequency appropriate for your countrys regulation. Check this option to enable auto-channel selection. Extension Channel Channel / Frequency Auto AP Detection can select the best channel to use by scanning nearby areas for Access Points. Configure up to eight different SSIDs (four in WDS AP mode). If many client devices will be accessing the network, you can arrange the devices into SSID groups. Click Edit to configure the profile and check whether you want to enable extra SSID. Click Accept to confirm the changes or Cancel to cancel and return previous settings. 40 AP Detection Current Profile Accept / Cancel 41 2.4G/5G SSID Profile Specify the SSID for the current profile. Check this option to hide the SSID from clients. If checked, the SSID will not appear in the site survey. Click the appropriate radio button to allow or prevent communication between client devices. See the Wireless Security section. Click Save to accept the changes or Cancel to cancel and return previous settings. 42 2.4G/5G SSID Profile SSID Suppressed SSID Station Separation Wireless Security Save / Cancel 43 Repeater mode:

44 2.4G/5G Wireless Network (Repeter mode) Wireless Mode SSID Wireless mode supports 802.11b/g/n mixed mode in 2.4G and 802.11a/n mixed mode in 5G. The SSID is a unique named shared amongst all the points of the wireless network. The SSID must be identical on all points of the wireless network and cannot exceed 32 characters. You may specify an SSID or select one from the Site Survey. Click on Site Survey to search the existing Access Points. Specify the BSSID (Access Points MAC Address). The encryption is using. It must the same as Access Points encryption. Click Accept to confirm the changes or Cancel to cancel and return previous settings. Site Survey Preferred BSSID Wireless Security Accept / Cancel 45 7.2 Wireless Security The Wireless Security section lets you configure the EAP600's security modes: WEP, WPA-PSK, WPA2-PSK, WPA-PSK Mixed, WPA, WPA2, and WPA Mixed. It is strongly recommend to use WPA2-PSK. WEP Encryption:

Select Open System or Shared Key. ASCII: Regular Text (recommended) HEX: Hexadecimal Numbers (For advanced users) Select the desired option and ensure the wireless clients use the same setting. Choices are 64, 128, 152-bit password lengths. Select the key you wish to be default. Transmitted data is ALWAYS encrypted using the Default Key; the other Keys are for decryption only. You must enter a Key Value for the Default Key. Enter the key value or values you wish to use. Only the Key selected as Default is required. The WEP Encryption Auth Type Input type Key Length Default Key Encryption Key #

46 others are optional. WPA-PSK (WPA Pre-Shared Key) Encryption:

WPA-PSK (WPA Pre-Shared Key) Encryption Encryption Passphrase Select the WPA encryption type you would like. Please ensure that your wireless clients use the same settings. Wireless clients must use the same key to associate the device. If using ASCII format, the Key must be from 8 to 63 characters in length. If using HEXformat, the Key must be 64 HEX characters in length. Group Key Update Interval Specify how often, in seconds, the group key changes. WPA Encryption: Only in Access Point / WDS AP mode 47 Select the WPA encryption type you would like. Please ensure that your wireless clients use the same settings. Enter the IP address of the Radius server. Enter the port number used for connections to the Radius server. Enter the secret required to connect to the Radius server. Specify how often, in seconds, the group key changes. Enable or disable accounting feature. Enter the IP address of the Radius accounting server. Enter the port number used for connections to the Radius accounting server. Enter the secret required to connect to the Radius accounting server. WPA Encryption Encryption Radius Server Radius Port Radius Secret Group Key Update Interval Radius Accounting Radius Accounting Server Radius Accounting Port Radius Accounting Secret 48 Interim Accounting Interval Specify how often, in seconds, the accounting data sends. Note: 802.11n does not allow WEP/WPA-PSK TKIP/WPA2-PSK TKIP security mode. The connection mode will automatically change from 802.11n to 802.11g. 49 7.3 Site Survey Use this feature to scan nearby Access Points. Note: Only applicable in Repeater mode. 1. Click Site Survey. 2. Scanning the nearby Access Points 50 3. The EAP600 will list the available access points after site survey. Site Survey (Repeater mode) 51 BSSID SSID Channel Signal Level (dBm) Type Security Refresh Access Point's wireless MAC address. SSID that the Access Point is broadcasting. Channel that the Access Point is using. Signal strength from the Access Point to your station. The band that the Access Point is using. Encryption method that the Access Point is using to secure data over the WLAN. Click Refresh to rescan nearby Access Point. 4. Select an Access Point and click that Access Points BSSID. 5. Enter the correct security setting. 52 53 7.4 Wireless MAC Filtering Wireless MAC Filtering is used to allow or deny network access to wireless clients (computers, tablet PCs, NAS, smartphones, etc.) according to their MAC addresses. You can manually add a MAC address to restrict the permission to access EAP600. The default setting is Disable Wireless MAC Filter. Note: Only applicable in Access Point and WDS AP mode. Wireless MAC Filter (Access Point / WDS AP mode) 54 ACL Mode MAC Address Add Delete Apply Determines whether network access is granted or denied to clients whose MAC addresses appear in the MAC Address table on this page. Choices are: Disabled, Deny MAC in the list, or Allow MAC in the list. Enter the MAC address of the wireless client. Click Add to add the MAC address to the MAC Address table. Delete the selected entries. Click Apply to apply the changes. 55 7.5 Wireless Advanced This page allows you to configure wireless advance settings. It is recommended that the default settings are used unless the user has experience with more advanced networking features. 2.4G/5G Wireless Advanced 56 Data Rate RTS/CTS Threshold Distance Aggregation Accept / Cancel Select a data rate from the drop-down list. The data rate affects throughput of data in the EAP600. The lower the data rate, the throughput will be lower, but so will the transmission distance. Specify the threshold package size for RTC/CTS. A small number causes RTS/CTS packets to be sent more often and consumes more bandwidth. Specify the distance between Access Points and clients. Longer distances may drop high-speed connections. Merges data packets into one packet. This option reduces the number of packets, but increases packet sizes. Click Accept to confirm the changes or Cancel to cancel and return previous settings. 57 7.6 WPS (Wi-Fi Protected Setup) Wi-Fi Protected Setup (WPS) feature complies with the Wi-Fi Alliance WPS standard and makes it easier to quickly add client devices to an established, security-enabled Wi-Fi network. WPS reduces the user steps required to configure a network and supports two methods that are familiar to most consumers to configure a network and enable security. Note: Only applicable in Access Point and WDS AP mode. 58 WPS (Wi-Fi Protected Setup) WPS WPS Current Status Self Pin Code SSID Authentication Mode Passphrase Key WPS via Push Button Select to Enable or Disable the WPS feature. Shows whether the WPS function is Configured or unConfigured. When it is Configured, the WPS has been used to authorize connection between the device and wireless clients. The PIN code of this device. The SSID (wireless network name) used when connecting using WPS. Shows the encryption method used by the WPS process. This is the passphrase key that is randomly generated during the WPS process. It is required if wireless clients that do not support WPS attempts to connect to the wireless network. Click this button to initialize WPS feature using the push button method. 59 WPS via PIN Enter the PIN code of the wireless device and click this button to initialize WPS feature using the PIN method. 60 7.7 WDS Link Settings Using WDS (Wireless Distribution System) will allow a network administrator or installer to connect to Access Points wirelessly. Doing so will extend the wired infrastructure to locations where cabling is not possible or inefficient to implement. Note: Compatibility between different brands and models of access points is not guaranteed. It is recommended that the WDS network be created using the same models for maximum compatibility. Also note: All Access Points in the WDS network needs to use the same Channel and Security settings. To create a WDS network, please enter the MAC addresses of the Access Points that you want included in the WDS. There can be a maximum of four access points. Note: Only applicable in WDS AP and WDS Bridge mode. 61 2.4G/5G WDS Link Settings Security Select None or AES from drop-down list. AES Passphrase MAC Address Mode Accept / Cancel Enter the key values you wish to use. Other AP(s) must use the same key to establish WDS link. Enter the Access Points MAC address to which you want to extend the wireless area. Select Disable or Enable from the drop-down list. Click Accept to confirm the changes or Cancel to cancel and return previous settings. 62 8 Management 8.1 Administration This page allows you to change the EAP600 username and password. By default, the username is admin and the password is: admin. The password can contain 0 to 12 alphanumeric characters and is case sensitive. Login Setting New Name Old Password New Password Confirm Password Save/Apply / Cancel Enter a new username for logging in to the New Name entry box. Enter the old password for logging in to the Old Password entry box. Enter the new password for logging in to the New Password entry box. Re-enter the new password in the Confirm Password entry box for confirmation. Click Save/Apply to apply the changes or Cancel to return previous settings. 63 8.2 Management VLAN Settings This page allows you to assign a VLAN tag to the packets. A VLAN is a group of computers on a network whose software has been configured so that they behave as if they were on a separate Local Area Network (LAN). Computers on VLAN do not have to be physically located next to one another on the LAN. Note: Only applicable in Access Point and WDS AP mode. 64 Management VLAN (Only applicable in Access Point mode) Profile Isolation VLAN ID Management VLAN ID Restricted client to communicate with different VID by selecting the radio button. Specify the VLAN tag for each profile. If your network includes VLANs, you can specify a VLAN ID for packets pass through the Access Point with a tag. Otherwise, select No VLAN tag. Click Accept to confirm the changes or Cancel to cancel and return previous settings. Accept / Cancel Note:

1. If you reconfigure the Management VLAN ID, you may lose your connection to the EAP600. Verify that the DHCP server supports the reconfigured VLAN ID and then reconnect to the EAP600 using the new IP address. 2. Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 5.1). 65 8.3 Wireless Traffic Shaping Traffic shaping regulates the flow of packets leaving an interface to deliver improved Quality of Service. Wireless Traffic Shaping Enable Traffic Shaping Check this option to enable wireless traffic shaping. Incoming Traffic Limit Outgoing Traffic Limit Accept / Cancel Specify the wireless transmission speed used for downloading. Specify the wireless transmission speed used for uploading. Click Accept to confirm the changes or Cancel to cancel and return previous settings. 66 8.4 SNMP Settings This page allows you to assign the Contact Details, Location, Community Name, and Trap Settings for Simple Network Management Protocol (SNMP). This is a networking management protocol used to monitor network attached devices. SNMP allows messages (called protocol data units) to be sent to various parts of the network. Upon receiving these messages, SNMP compatible devices (called agents) return the data stored in their Management Information Bases. 67 Specify the password for the SNMP community with read/write access. Enable or Disable SNMP feature. Specify the contact details of the device Specify the location of the device. SNMP SNMP Enable/Disable Contact Location Community Name (Read Only) Specify the password for the SNMP community for read only access. Community Name

(Read/Write) Trap Trap Destination Address Trap Destination Community Name SNMPv3 SNMPv3 Enable/Disable User Name Auth Protocol Auth Key Priv Protocol Priv Key Engine ID Save/Apply / Cancel Specify the username for SNMPv3. Select the authentication protocol type: MDS or SHA. Specify the authentication key for authentication. Select the privacy protocol type: DES. Specify the privacy key for privacy. Specify the engine ID for SNMPv3. Click Save/Apply to apply the changes or Cancel to return previous settings. Specify the IP address of the computer that will receive the SNMP traps. Specify the password for the SNMP trap community. Enable or Disable SNMPv3 feature. 68 8.5 Backup/Restore This page allows you to save the current device configurations. When you save the configurations, you also can reload the saved configurations into the device through the Restore Saved Settings from A File section. If extreme problems occur, or if you have set the EAP600 wrongly, you can use the Factory Default button in the Revert to Factory Default Settings section to restore all the configurations of the EAP600 to the original default settings. Click Backup to save the current configured settings. To restore settings that have been previously backed up, click Browse, select the file, and click Restore. Click Factory Default button to restore the EAP600 to its factory default settings. Backup/Restore Save A Copy of Current Settings Restore Saved Settings from A File Revert to Factory Default Settings 69 8.6 Auto Reboot Settings You can specify how long to reboot the EAP600 periodically. Auto Reboot Settings Auto Reboot Setting Frequency of Auto Reboot To specify the time to reboot the EAP600 by Min, Hour, Day or Week. Save/Apply / Cancel Enable or disable the auto reboot function. Click Save/Apply to apply the changes or Cancel to return previous settings. 70 8.7 Firmware Upgrade This page allows you to upgrade the firmware of the EAP600. To perform the Firmware Upgrade:

1. Click the Browse button and navigate the OS File System to the location of the upgrade file. 2. Select the upgrade file. The name of the file will appear in the Upgrade File field. 3. Click the Upload button to commence the firmware upgrade. Note: The device is unavailable during the upgrade process and must restart when the upgrade is completed. Any connections to or through the device will be lost. 71 8.8 Time Setting This page allows you to set the internal clock of the EAP600. Time Manually Set Date and Time Manually specify the date and time. Automatically Get Date and Time Select a time zone from the drop-down list and check whether you want to enter the IP address of an NTP server or use the default NTP server to get have the internal clock set automatically. Check whether daylight savings applies to your area. Enable Daylight Saving 72 8.9 Log This page allows you to setup Syslog and local log functions of the EAP600. Log Syslog Enable or disable the syslog function. Log Server IP Address Enter the IP address of the log server. Local Log Enable or disable the local log service. Save/Apply / Cancel Click Save/Apply to apply the changes or Cancel to return previous settings. 73 8.10 Diagnostics This page allows you to analyze the connection quality of the EAP600 and trace the routing table to a target in the network. Diagnosis Target IP Ping Packet Size Number of Pings Start Ping Traceroute Target Start Traceroute Enter the IP address you would like to search. Enter the packet size of each ping. Enter the number of times you want to ping. Click Start Ping to begin pinging target device (via IP). Enter an IP address or domain name you want to trace. Click Start Traceroute to begin the trace route operation. 74 8.11 LED Control This page allows you to control LED on/off for Power, LAN interface, 2.4G/5G WLAN interface and WPS. 75 8.12 Logout Click [Logout] in Management menu to logout. 76 8.13 Reset In some circumstances, it may be required to force the device to reboot. Click on Reboot the Device to reboot the EAP600. 77 Appendix A FCC Interference Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Increase the separation between the equipment and receiver.

- Reorient or relocate the receiving antenna.

-

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 21cm between the radiator & your body. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. 78 Appendix B IC Interference Statement Industry Canada statement:

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Caution :

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

(ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont reserves uniquement pour une utilisation a linterieur afin de reduire les risques de brouillage prejudiciable aux systemes de satellites mobiles utilisant les memes canaux;

(ii) De plus, les utilisateurs devraient aussi etre avises que les utilisateurs de radars de haute puissance sont designes utilisateurs principaux (c.-a-

d., quils ont la priorite) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. IMPORTANT NOTE: (For mobile devices usage) Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 21cm between the radiator & your body. NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles) Dclaration d'exposition aux radiations:

Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 21cm de distance entre la source de rayonnement et votre corps. 79 Appendix C CE Interference Statement Europe EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:

- EN60950-1

- Safety of Information Technology Equipment

- EN50385

- Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz)

- EN 300 328

- Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

- EN 301 489-1

- Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements

- EN 301 489-17

- Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment

- EN 301 893

- Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive This device is a 2.4 GHz/5 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in 80 the frequency range of 2454 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. 0560 esky [Czech]

Dansk [Danish]

Deutsch [German]

Eesti [Estonian]

English Espaol [Spanish]

[Greek]

Franais [French]

Italiano [Italian]

Latviski [Latvian]

[Jmno vrobce] tmto prohlauje, e tento [typ zazen] je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Undertegnede [fabrikantens navn] erklrer herved, at flgende udstyr [udstyrets typebetegnelse] overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Hiermit erklrt [Name des Herstellers], dass sich das Gert [Gertetyp] in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Kesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tp = type of equipment] vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

[name of manufacturer] [type of equipment]

1999/5/. Par la prsente [nom du fabricant] dclare que l'appareil [type d'appareil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio]

conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Ar o [name of manufacturer / izgatavotja nosaukums] deklar, ka [type of equipment /

iekrtas tips] atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. 81 Lietuvi [Lithuanian]

Nederlands [Dutch]

Malti [Maltese]

Magyar [Hungarian]

Polski [Polish]

Portugus

[Portuguese]

Slovensko [Slovenian]

Slovensky [Slovak]

Suomi [Finnish]

Svenska [Swedish]

iuo [manufacturer name] deklaruoja, kad is [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-

tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Alulrott, [gyrt neve] nyilatkozom, hogy a [... tpus] megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Niniejszym [nazwa producenta] owiadcza, e [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

[Nome do fabricante] declara que este [tipo de equipamento] est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE.

[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES.

[Meno vrobcu] tmto vyhlasuje, e [typ zariadenia] spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES.

[Valmistaja = manufacturer] vakuuttaa tten ett [type of equipment = laitteen tyyppimerkint] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Hrmed intygar [fretag] att denna [utrustningstyp] str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG.