submitted / available | |||||||
---|---|---|---|---|---|---|---|
|
External Photos | External Photos | 216.17 KiB | December 09 2019 | |||
|
ID Label and Label Location | ID Label/Location Info | 108.63 KiB | December 09 2019 | |||
|
Attestation Statement | Attestation Statements | 210.23 KiB | August 08 2023 / September 07 2023 | |||
|
Cover Letters | Cover Letter(s) | 203.59 KiB | August 08 2023 / September 07 2023 | |||
|
RF Exposure info | RF Exposure Info | 2.58 MiB | August 08 2023 / September 07 2023 | |||
|
Test Report | Test Report | 3.85 MiB | August 24 2023 / September 07 2023 | |||
|
Test Setup Photos | Test Setup Photos | 645.76 KiB | August 08 2023 / September 07 2023 | |||
|
Application letter | Cover Letter(s) | 293.73 KiB | May 30 2023 / June 06 2023 | |||
|
Authorisation letter | Cover Letter(s) | 193.95 KiB | May 30 2023 / June 06 2023 | |||
|
Confidentiality letter | Cover Letter(s) | 99.98 KiB | May 30 2023 / June 06 2023 | |||
|
RF exposure report | RF Exposure Info | 451.56 KiB | May 30 2023 / June 06 2023 | |||
Technical description | Operational Description | May 30 2023 | confidential | ||||
|
Test report Part3 | Test Report | 4.70 MiB | May 30 2023 / June 06 2023 | |||
|
Test report part1 | Test Report | 5.65 MiB | May 30 2023 / June 06 2023 | |||
|
Test report part2 | Test Report | 5.70 MiB | May 30 2023 / June 06 2023 | |||
|
Test report part4 | Test Report | 2.66 MiB | May 30 2023 / June 06 2023 | |||
Cover Letter(s) | 495.02 KiB | February 14 2022 / February 18 2022 | |||||
|
Confidentiality request | Cover Letter(s) | 183.03 KiB | February 14 2022 / February 18 2022 | |||
User manual Part1 | Users Manual | February 14 2022 | confidential | ||||
User manual part2 | Users Manual | February 14 2022 | confidential | ||||
|
Agents Letter | Cover Letter(s) | 313.34 KiB | April 13 2020 / April 14 2020 | |||
|
Antenna List Letter | Cover Letter(s) | 150.79 KiB | April 13 2020 / April 14 2020 | |||
Antenna information | Operational Description | April 13 2020 | confidential | ||||
|
Antenna Information | Cover Letter(s) | 445.72 KiB | February 03 2020 / February 06 2020 | |||
|
Confidenitiality Letter | Cover Letter(s) | 88.22 KiB | January 30 2020 / February 06 2020 | |||
|
FCC Cover Letter | Cover Letter(s) | 485.54 KiB | January 30 2020 / February 06 2020 | |||
Operational Description/Antenna Information | Operational Description | January 30 2020 | confidential | ||||
|
Antenna List | Cover Letter(s) | 113.36 KiB | ||||
Block Diagram | Block Diagram | September 12 2019 | confidential | ||||
Test Report | December 09 2019 | ||||||
Internal Photos | Internal Photos | September 12 2019 | confidential | ||||
|
Limited Modular Approval Letter | Cover Letter(s) | 77.95 KiB | December 09 2019 | |||
Operating Description I | Operational Description | September 12 2019 | confidential | ||||
Operating Description II | Operational Description | September 12 2019 | confidential | ||||
Parts List | Parts List/Tune Up Info | September 12 2019 | confidential | ||||
Schematics | Schematics | September 12 2019 | confidential | ||||
Test Report | December 09 2019 | ||||||
Test Report | December 09 2019 | ||||||
Test Report | December 09 2019 | ||||||
Test Report | December 09 2019 | ||||||
User Manual I | Users Manual | September 12 2019 | confidential | ||||
User Manual II | Users Manual | September 12 2019 | confidential | ||||
User Manual III | Users Manual | September 12 2019 | confidential |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2023-09-07 | 3550 ~ 3700 | CBD - Citizens Band Category A and B Devices | Class II Permissive Change |
2 | 2023-06-06 | 3550 ~ 3700 | CBD - Citizens Band Category A and B Devices | Class II permissive change or modification of presently authorized equipment |
3 | 2022-02-18 | 3550 ~ 3700 | CBD - Citizens Band Category A and B Devices | Class II Permissive Change |
4 | 2020-04-14 | 3550 ~ 3700 | CBD - Citizens Band Category A and B Devices | |
5 | 2020-02-06 | 3550 ~ 3700 | CBD - Citizens Band Category A and B Devices | |
6 | 2019-09-23 | 3550 ~ 3700 | CBD - Citizens Band Category A and B Devices | Original Equipment |
Applicant Information | ||||||
---|---|---|---|---|---|---|
Effective |
2023-09-07
|
|||||
2023-06-06
|
||||||
2022-02-18
|
||||||
2020-04-14
|
||||||
2020-02-06
|
||||||
2019-09-23
|
||||||
Applicant's complete, legal business name |
Ericsson AB
|
|||||
FCC Registration Number (FRN) |
0013476155
|
|||||
0024080715
|
||||||
Physical Address |
PEU Radio Torshamnsgatan 23
|
|||||
PDU Radio Torshamnsgatan 23
|
||||||
PEU Radio
|
||||||
PDU Radio
|
||||||
Stockholm, N/A
|
||||||
Stockholm, N/A 164 80
|
||||||
Stockholm
|
||||||
Sweden
|
||||||
TCB Information | ||||||
TCB Application Email Address |
j******@nemko.com
|
|||||
T******@tuvsud.com
|
||||||
T******@tuv-sud.com
|
||||||
a******@tuvsud.com
|
||||||
TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
|||||
FCC ID | ||||||
Grantee Code |
TA8
|
|||||
Equipment Product Code |
AKRC161746-1
|
|||||
Person at the applicant's address to receive grant or for contact | ||||||
Name |
P******** M******
|
|||||
I**** T****
|
||||||
Title |
Head of PEU Radio
|
|||||
Head of PDU Radio
|
||||||
Telephone Number |
+46 1********
|
|||||
Fax Number |
+46 1********
|
|||||
p******@ericsson.com
|
||||||
i******@ericsson.com
|
||||||
Technical Contact | ||||||
n/a | ||||||
Non Technical Contact | ||||||
n/a | ||||||
Confidentiality (long or short term) | ||||||
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | |||||
Yes | ||||||
Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | |||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
Cognitive Radio & Software Defined Radio, Class, etc | ||||||
Is this application for software defined/cognitive radio authorization? | No | |||||
Equipment Class | CBD - Citizens Band Category A and B Devices | |||||
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Remote Radio Unit which supports LTE and NR | |||||
Remote Radio Unit which supports LTE | ||||||
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | |||||
No | ||||||
Modular Equipment Type | Limited Single Modular Approval | |||||
Does not apply | ||||||
Purpose / Application is for | Class II Permissive Change | |||||
Class II permissive change or modification of presently authorized equipment | ||||||
Original Equipment | ||||||
Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | |||||
Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | |||||
Grant Comments | Limited Single Modular Approval. The power output listed is the manufacturers Max EIRP. This transmitter must only be operated in the grantee's RBS systems. This device is limited to outdoor operations. This transmitter supports single and multi-carrier operation in LTE mode. The internal antenna used for this transmitter must be installed to provide a separation distance of at least 210 cm from the General Public (uncontrolled exposure) or 90 cm from an Occupational Worker(controlled exposure). Grantee is responsible to ensure the individual devices in the final hosts compliance with 96.41(B) EIRP limits for Category B CBSD. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. External antenna(s) used for this transmitter must be fixed mounted on outdoor permanent structures. RF exposure compliance for these external antennas is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307 (b)(3). | |||||
Class II Permissive change to add 10MHz and 15 MHz bandwidths to NR. Limited Single Modular Approval. The listed power output 50W and 100W is the manufacturer Max EIRP for LTE, 5W is the manufacturer Max conducted power per port for NR. This transmitter must only be operated in the grantee's RBS systems. This device is limited to outdoor operations. This transmitter supports single and multi-carrier operation in LTE and NR mode. The internal antenna used for this transmitter must be installed to provide a separation distance of at least 290 cm from the General Public (uncontrolled exposure) or 90 cm from an Occupational Worker (controlled exposure). Grantee is responsible to ensure the individual devices in the final hosts compliance with 96.41(B) EIRP limits for Category B CBSD. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. External antenna(s) used for this transmitter must be fixed mounted on outdoor permanent structures. RF exposure compliance for these external antennas is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307 (b)(3). | ||||||
Class II Permissive change as described in this filing. Limited Single Modular Approval. The listed power output 50W and 100W is the manufacturer Max EIRP for LTE, 5W is the manufacturer Max conducted power per port for NR. This transmitter must only be operated in the grantee's RBS systems. This device is limited to outdoor operations. This transmitter supports single and multi-carrier operation in LTE and NR mode. The internal antenna used for this transmitter must be installed to provide a separation distance of at least 290 cm from the General Public (uncontrolled exposure) or 90 cm from an Occupational Worker (controlled exposure). Grantee is responsible to ensure the individual devices in the final hosts compliance with 96.41(B) EIRP limits for Category B CBSD. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. External antenna(s) used for this transmitter must be fixed mounted on outdoor permanent structures. RF exposure compliance for these external antennas is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307 (b)(3). | ||||||
Class II Permissive change as described in this filing. Limited Single Modular Approval. The power output listed is the manufacturers Max EIRP. This transmitter must only be operated in the grantee's RBS systems. This device is limited to outdoor operations. This transmitter supports single and multi-carrier operation in LTE mode. The internal antenna used for this transmitter must be installed to provide a separation distance of at least 290 cm from the General Public (uncontrolled exposure) or 90 cm from an Occupational Worker (controlled exposure). Grantee is responsible to ensure the individual devices in the final hosts compliance with 96.41(B) EIRP limits for Category B CBSD. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. External antenna(s) used for this transmitter must be fixed mounted on outdoor permanent structures. RF exposure compliance for these external antennas is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307 (b)(3). | ||||||
Limited Single Modular Approval. The power output listed is the manufacturers Max EIRP. This transmitter must only be operated in the grantee's RBS systems. This device is limited to outdoor operations. This transmitter supports single and multi-carrier operation in LTE mode. The internal antenna used for this transmitter must be installed to provide a separation distance of at least 210 cm from the General Public (uncontrolled exposure) or 90 cm from an Occupational Worker (controlled exposure). Grantee is responsible to ensure the individual devices in the final hosts compliance with 96.41(B) EIRP limits for Category B CBSD. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. External antenna(s) used for this transmitter must be fixed mounted on outdoor permanent structures. RF exposure compliance for these external antennas is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307 (b)(3). | ||||||
Is there an equipment authorization waiver associated with this application? | No | |||||
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | |||||
Test Firm Name and Contact Information | ||||||
Firm Name |
Nemko USA, Inc.
|
|||||
Intertek Testing Services Shanghai
|
||||||
Intertek Semko AB
|
||||||
TUV SUD Product Service
|
||||||
Name |
J****** C****
|
|||||
L****** X******
|
||||||
P******** I******
|
||||||
M****** J********
|
||||||
Telephone Number |
858-7********
|
|||||
+86 2********
|
||||||
+4670********
|
||||||
00-44********
|
||||||
Fax Number |
00-44********
|
|||||
J******@nemko.com
|
||||||
l******@intertek.com
|
||||||
p******@intertek.com
|
||||||
m******@tuv-sud.co.uk
|
||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 96 | EP MO | 3550 | 3700 | 50 | 0.05 ppm | 10M0F9W | |||||||||||||||||||||||||||||||||
1 | 2 | 96 | EP MO | 3550 | 3700 | 100 | 0.05 ppm | 20M0F9W | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 96 | EP MO | 3550 | 3700 | 50 | 0.05 ppm | 10M0F9W | |||||||||||||||||||||||||||||||||
2 | 2 | 96 | EP MO | 3550 | 3700 | 100 | 0.05 ppm | 20M0F9W | |||||||||||||||||||||||||||||||||
2 | 3 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 10M0F9W | |||||||||||||||||||||||||||||||||
2 | 4 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 15M0F9W | |||||||||||||||||||||||||||||||||
2 | 5 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 20M0F9W | |||||||||||||||||||||||||||||||||
2 | 6 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 30M0F9W | |||||||||||||||||||||||||||||||||
2 | 7 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 40M0F9W | |||||||||||||||||||||||||||||||||
2 | 8 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 50M0F9W | |||||||||||||||||||||||||||||||||
2 | 9 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 60M0F9W | |||||||||||||||||||||||||||||||||
2 | 1 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 70M0F9W | |||||||||||||||||||||||||||||||||
2 | 11 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 80M0F9W | |||||||||||||||||||||||||||||||||
2 | 12 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 90M0F9W | |||||||||||||||||||||||||||||||||
2 | 13 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 100MF9W | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 96 | EP MO | 3550 | 3700 | 50 | 0.05 ppm | 10M0F9W | |||||||||||||||||||||||||||||||||
3 | 2 | 96 | EP MO | 3550 | 3700 | 100 | 0.05 ppm | 20M0F9W | |||||||||||||||||||||||||||||||||
3 | 3 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 20M0F9W | |||||||||||||||||||||||||||||||||
3 | 4 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 30M0F9W | |||||||||||||||||||||||||||||||||
3 | 5 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 40M0F9W | |||||||||||||||||||||||||||||||||
3 | 6 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 50M0F9W | |||||||||||||||||||||||||||||||||
3 | 7 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 60M0F9W | |||||||||||||||||||||||||||||||||
3 | 8 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 70M0F9W | |||||||||||||||||||||||||||||||||
3 | 9 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 80M0F9W | |||||||||||||||||||||||||||||||||
3 | 1 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 90M0F9W | |||||||||||||||||||||||||||||||||
3 | 11 | 96 | MO | 3550 | 3700 | 5 | 0.05 ppm | 100MF9W | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 96 | EP MO | 3550 | 3700 | 50 | 0.05 ppm | 10M0F9W | |||||||||||||||||||||||||||||||||
4 | 2 | 96 | EP MO | 3550 | 3700 | 100 | 0.05 ppm | 20M0F9W | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 96 | EP MO | 3550 | 3700 | 50 | 0.05 ppm | 10M0F9W | |||||||||||||||||||||||||||||||||
5 | 2 | 96 | EP MO | 3550 | 3700 | 100 | 0.05 ppm | 20M0F9W | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 96 | EP MO | 3550 | 3700 | 50 | 0.05 ppm | 10M0F9W | |||||||||||||||||||||||||||||||||
6 | 2 | 96 | EP MO | 3550 | 3700 | 100 | 0.05 ppm | 20M0F9W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC