|
app
s
|
Applicant Information
|
|
|
1 2 3 4
|
Effective |
2009-12-18
|
|
1 2 3 4
|
2009-06-30
|
|
1 2 3 4
|
Applicant's complete, legal business name |
Ericsson AB
|
|
1 2 3 4
|
FCC Registration Number (FRN) |
0017216037
|
|
1 2 3 4
|
Physical Address |
Mobile Broadband Modules
|
|
1 2 3 4
|
Gothenburg, N/A SE 417 56
|
|
1 2 3 4
|
Sweden
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4
|
TCB Application Email Address |
V******@babt.com
|
|
1 2 3 4
|
TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
1 2 3 4
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4
|
Grantee Code |
VV7
|
|
1 2 3 4
|
Equipment Product Code |
MBMF3607GW2-D
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4
|
Name |
M****** H******
|
|
1 2 3 4
|
Title |
Director Product Management
|
|
1 2 3 4
|
Telephone Number |
++461********
|
|
1 2 3 4
|
Fax Number |
+46 1********
|
|
1 2 3 4
|
E-mail |
m******@ericsson.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/16/2010 |
| 1 2 3 4 | 12/27/2009 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 | Equipment Class | PCB - PCS Licensed Transmitter |
| 1 2 3 4 | JBP - Part 15 Class B Computing Device Peripheral |
| 1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | F3607gw Ericsson Mobile Broadband Module - 850/900/1800/1900/2100 MHz GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA Mini-PCIe Wireless WAN card |
| 1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 3 4 | Change in identification of presently authorized equipment. Original FCC ID: VV7-MBMF3607GW2 Grant Date: 06/30/2009 |
| 1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 | Grant Comments | Single Modular Approval. Class II permissive change filing for component changes as detailed in this filing. Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.74 dBi in the 850 MHz Cellular band and 9.66 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.
This device is approved for use in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 4.65 dBi in the 850 MHz Cellular band and 7.40 dBi in the PCS 1900 MHz band. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.
This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. |
| 1 2 3 4 | Single Modular Approval. Class II permissive change filing for component changes as detailed in this filing. This device is approved for use in specific co-located configurations in generic host platforms as described in this filing. |
| 1 2 3 4 | Single Modular Approval.
Output power is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 7.74 dBi in the 850 MHz Cellular band and 9.66 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.
This device is approved for use in specific co-located configurations in generic host platforms as described in this filing, with maximum antenna gain of 4.65 dBi in the 850 MHz Cellular band and 7.40 dBi in the PCS 1900 MHz band.
Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.
This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. |
| 1 2 3 4 | Single Modular Approval.
This device is approved for use in specific co-located configurations in generic host platforms as described in this filing. |
| 1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4
|
Firm Name |
DEKRA Testing and Certification, S.A.U.
|
|
1 2 3 4
|
SGS TAIWAN LTD.
|
|
1 2 3 4
|
Name |
F******** C******
|
|
1 2 3 4
|
N****** B****
|
|
1 2 3 4
|
Telephone Number |
34-95********
|
|
1 2 3 4
|
886-2******** Extension:
|
|
1 2 3 4
|
Fax Number |
34-95********
|
|
1 2 3 4
|
886-2********
|
|
1 2 3 4
|
E-mail |
f******@dekra.com
|
|
1 2 3 4
|
n******@sgs.com
|
|