|
app
s
|
Applicant Information
|
|
|
1
|
Effective |
2000-07-06
|
|
1
|
Applicant's complete, legal business name |
Ericsson Radio Systems BV
|
|
1
|
FCC Registration Number (FRN) |
9999999999
|
|
1
|
Physical Address |
Nieuw Amsterdamsestraat 40
|
|
1
|
7814 VA Emmen, N/A
|
|
1
|
Netherlands
|
|
|
app
s
|
TCB Information
|
|
|
n/a |
|
|
app
s
|
FCC ID
|
|
1
|
Grantee Code |
CGK
|
|
1
|
Equipment Product Code |
8001001
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1
|
Name |
P**** I****
|
|
1
|
Telephone Number |
973-8********
|
|
1
|
Fax Number |
973-8********
|
|
1
|
E-mail |
p******@erols.com
|
|
|
app
s
|
Technical Contact
|
|
1
|
Firm Name |
Cetecom b.v.b.a., MD
|
|
1
|
Name |
P****** M******** I******
|
|
1
|
Physical Address |
14085 Howard Road
|
|
1
|
Dayton, Maryland 21036
|
|
1
|
United States
|
|
1
|
Telephone Number |
410-5********
|
|
1
|
Fax Number |
410-5********
|
|
1
|
E-mail |
j******@erols.com
|
|
|
app
s
|
Non Technical Contact
|
|
1
|
Firm Name |
Cetecom b.v.b.a., MD
|
|
1
|
Name |
P**** M**** I******
|
|
1
|
Physical Address |
14085 Howard Road
|
|
1
|
Dayton, Maryland 21036
|
|
1
|
United States
|
|
1
|
Telephone Number |
41053********
|
|
1
|
Fax Number |
41053********
|
|
1
|
E-mail |
j******@erols.com
|
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Spread Spectrum Transmitter Module |
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 | Modular Equipment Type | Single Modular Approval |
| 1 | Purpose / Application is for | Original Equipment |
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
| 1 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 | Grant Comments | This modular transmitter is approved for use with devices that satisfy the mobile operating requirements of Section 2.1091. For portable operating configurations, as defined in Section 2.1093, if the device or its antenna(s) may operate in contact with a person's body (excluding hands, wrists, feet and ankles), then neither the total peak conducted nor peak radiated (EIRP) output power of all transmitters, whether this module is integrated internally or attached directly to a device operating with it, may exceed 5 mW. For all other portable operating configurations, neither the total peak conducted nor peak radiated (EIRP) output power from all transmitters operating with a device using this module, whether this module is integrated internally or attached directly to a device operating with it, may exceed 10 mW. The Grantee must inform second manufacturers/installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences, a separate FCC equipment authorization must be obtained for each device into which this module is installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. If the Grantee does not provide an antenna with this module, it may not be sold to the end- user, but may be sold to a second manufacturer/installer. Instructions must be provided by the Grantee to the second manufacturer/installer that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used, and it complies with the requirements of Section 15.203 (i.e., has either a permanently attached antenna or utilizes a unique connector). Compliance of this module in its final configuration is the responsibility of the Grantee. If the second manufacturer/installer desires to use an antenna with this module that has not been previously approved for use with it, then the Grantee must file a Class II permissive change to approve the new antenna with the module. Alternatively, the second manufacturer/installer may obtain a separate FCC equipment authorization for the module and the new antenna. If the second manufacturer/installer markets a device that does not comply with the Grantee's instructions for antenna configuration without having obtained a separate FCC equipment authorization for the module and new antenna configuration, that device will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. |
| 1 | Is there an equipment authorization waiver associated with this application? | No |
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
|
n/a |
|