GameCube 2.4GHz Wireless Controller c) Controller's receiver Instruction Manual FORCE CONNECTION BUTTON Thank you for purchasing Hip Gear 2.4GHz Wireless Controller for GameCube. Please read this manual carefully before use. How to use:
Step 1: Turn off your console and insert the controllers receiver into the Player 1 slot Features:
- Fully compatible with GameCube
- Dual rumble motors
- Power on/off switch
- Rumble on/off switch
- 6 Digital Action Buttons and 2 Analog Triggers
- Rubberized grips
- Auto channel selection
- 50 (15 meter) range
- Turbo fire setting
- Macro setting
- Low power Indicator Button Name for Hip Gears 2.4GHz GameCube Wireless Controller:
a) Controller (front view) Directional Stick Start,Pause Macro Turbo D Pad Macro T U R B O STAR T ON OFF Y X A B C Stick b) Controller (top view) Power OFF Power ON Vibration Z Right Analog Trigger Left Analog Trigger Battery Replacement:
- Open the battery compartment door.
Insert the batteries as marked on the bottom of the battery compartment. Make sure that the polarity matches the illustration on the battery compartment. Step 2: When the receiver is first plugged into the console, the LED is OFF. Once the controller has detected the receiver, the LED on the receiver will turn ON. The controller is now ready to use. Please note that the controller MAY take up to 3 minutes to connect to the receiver. Note:
- Do not insert the controllers receiver into a memory card slot.
- Make sure to switch off the console before inserting the controllers receiver. Once the receiver is inserted you may turn on your console. LED
- Close the battery compartment door. You are now ready to use your wireless controller. Note:
- For increased playing time, use Alkaline batteries.
- Do not mix fresh and used batteries. This will reduce the controllers transmitting and receiving distance and may cause the product to malfunction.
- Rechargeable NiMH or NiCad batteries can safely be used with this product(rechargeable batteries are not included).Dispose of used batteries according to the battery manufacturers instructions. Note:
When using more than one wireless controller, plug one receiver in at a time. When the LED lights up on the first receiver you can then plug in the second wireless receiver into the next available controller port. Force Connection to a designated Controller and Receiver:Forcing the connection to a designated controller and receiver can be achievedby following the steps listed below:a)Press the FC button on the receiver - the LED on the receiver starts to blink. Macro Setting:
On your controller the Z button has built in Macro capabilities. This Macro function allows you to program complicated moves and button combinations into the Z button. Low Power Indication:
The Turbo LED and Macro LED will blink simultaneously when the power is low, replace with new batteries. R B O Macro T U Rumble On/Off Note:The regular function of the Z button is suspended when the button has a Macrofunction designated to it. Only when the Macro designated button is cleared The Rumble motors will be turned on when the main power switch is set to Rumble (wavy lines). The Rumble motors will not operate when the power will the button resume its regular operation. Clearing the Macro function is explained further in this manual. switch is in the on position. STAR T LED light-up ON OFF b) Press and hold the Macro, Turbo and Start button simultaneously on the controller. The LED of the receiver will stop blinking and light up. The forced connection is complete and you are ready to play. FORCE CONNECTION BUTTON LED Macro T U R B O STAR T Note:If the controller is left idle for more than 3 minutes the designated connectionmay be lost. If this happens, simply repeat the steps above. How to Program a Macro Function:
- Press Macro button, the Function LED turns ON.
- Press then Z button. Turbo Fire Setting:
Each button of the wireless controller has a built-in Turbo Fire function, simply follow the steps listed below to achieve a Turbo Fire gaming experience:
- Press and hold the Turbo Fire button, the Function LED lights up.
- Press any button on the controller and the LED will turn off. The Turbo
- The Function LED will blink when you press a button that has been set to
- Repeat the procedure to assign more than one button at a time to a Turbo setting is complete. Turbo Fire. ON OFF Fire function. O O AC R AC R M M T T U U R R B B O O STAR T STAR T O O AC R AC R M M STAR T STAR T LED light-up RTB LTB O AC R M T U R B O O MA C R T U R B O Note:The controller and the receiver must be connected before assigning any Turbo Fire function. START STAR T To Clear Turbo Fire:
- Press and hold the Turbo Fire button, the Function LED will light up.
- Press the button that has been set to Turbo Fire, the LED will turn off.
- The Turbo Fire is clear, repeat this procedure for any other Turbo Fire cancellations. ON OFF ON OFF ON ON OFF OFF is now OFF. maximum of 15 button presses are allowed.
- Input the button combination you wish to designate to the Macro button (Z). The button combination must be completed within 10 seconds and a
- Press the Macro button again when the input has been completed, the LED
- The Function LED will blink when the Macro function button is activated. To Clear a Macro Setting:
- Press the Macro button, the Function LED is now ON.
- Press the Z button
- Press the Macro button again, the Macro setting is now clear, and the LED ON ON OFF OFF is OFF. User Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. The FCC require the user to be notified that any changes or modification made to this device that are not expressly approved by Esel International Co., Ltd. may avoid the user's authority to operate the equipment. To comply with FCC RF exposure requirement, this device and its antenna must no be co-located or operating in conjunction with any other antenna or transmitter. Warning:
-Reorient or relocate the receiving antenna. FEDERAL COMMUNICATIONS COMMISSION
-Increase the separation between the equipment and receiver. This device complies with Part 15 of the FCC Rules.
-Connect the equipment into an outlet on a circuit different Operation is subject to the following two conditions:(1) this from that to which the receiver is connected. device may not cause harmful interference, and (2) this
-Consult the dealer or an experienced radio/TV technician for device must accept any interference received, including interference that may cause undesired operation. help. NOTE Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to This equipment has been tested and found to comply with the operate the equipment. limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable The antenna(s) used for this transmitter must not be protection against harmful interference in a residential co-located or operating in conjunction with any other antenna or transmitter. installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: