FCC ID: 2ATQQ-EVMFV2 Smartphone

User Manual FCC ID: 2ATQQ-EVMFV2 Smartphone EVMFV2 evoo Evoo Products Company,LLC 130mm 390mm m m 0 8 Emergency call If any emergency arises, dial 112/911 (or other emergency call number) for emergency help. Due to the nature of cellular networking, the success of emergency call is not guaranteed. FCC Warning:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types EVMFV2 (FCC ID: 2ATQQ-EVMFV2) has also been tested against this SAR limit. The highest reported SAR values for head, body-worn accessory, and product specific (Hotspot) are 0.71 W/kg, 0.87 W/kg, and 0.87 W/kg respectively. The Max simultaneous SAR is 1.08 W/kg. This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

Evoo Products Company,LLC Date: Jul. 24, 2019 File Name Schematics.pdf Block Diagram.pdf Operational Description.pdf Part List.pdf Part Placement Schematics.pdf PCB Layout Schematics.pdf Tune-up Procedure.pdf Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2ATQQ-EVMFV2 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Schematics Block Diagram Operational Description Part List Part Placement Schematics PCB Layout Schematics Tune-up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Evoo Products Company,LLC Signature Apple Liu / Project Manager Typed name and Title

Appendix-EVMFV2-Photos EUT External View Model EVMFV2 FCC ID: 2ATQQ-EVMFV2 Page 5 of 17 Appendix-EVMFV2-Photos Page 6 of 17 Appendix-EVMFV2-Photos Page 7 of 17 Appendix-EVMFV2-Photos Page 8 of 17 Appendix-EVMFV2-Photos Page 9 of 17

Appendix-EVMFV2-Photos EUT Internal View Model EVMFV2 FCC ID: 2ATQQ-EVMFV2 BT/WIFI/BLE ANT. GSM/WCDMA/LTE ANT. Page 10 of 17 Appendix-EVMFV2-Photos Page 11 of 17 Appendix-EVMFV2-Photos Page 12 of 17 Appendix-EVMFV2-Photos Page 13 of 17

Appendix-EVMFV2-Photos Page 14 of 17 Appendix-EVMFV2-Photos Page 15 of 17 Appendix-EVMFV2-Photos Page 16 of 17 Appendix-EVMFV2-Photos

======End======

Page 17 of 17

Evoo Products Company,LLC Date: 7/24/2019 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD To Whom It May Concern:

We, Evoo Products Company,LLC, state that our device, FCC ID: 2ATQQ-EVMFV2, has a non-detachable battery, the label is visible to the users as they purchase the products and install TF card or SIM cards. The back cover can not be moved away, so the FCC ID label has to be placed on the surface of product. Sincerely, Signature

[Apple Liu (Name)]

[Project Manager (Title)]

[Evoo Products Company,LLC (Company name)]

POWER OF ATTORNEY Evoo Products Company,LLC FCC ID: 2ATQQ-EVMFV2 Date: Jul. 24, 2019 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Services (ShenZhen) Co., Ltd.

(Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on Jun. 19, 2020. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Evoo Products Company,LLC are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Evoo Products Company,LLC Signature Apple Liu / Project Manager Typed name and Title

Evoo Products Company,LLC Date: 2019-07-24 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ATQQ-EVMFV2 To Whom It May Concern:

This letter is to statement that EVMFV2/Smartphone. has been tested according to FCC Part 15B by Waltek Services (Shenzhen) Co., Ltd. (Test Report No.: WTS19S05031214E). And the SDOC file, meetting the requirements of the FCC regulations, would been provided when the device is sold by the responsible party in US. The service will not be sold until the SDOC is provided. If the sale does not have an SDOC, all responsibility is the responsibility of the applicant. Sincerely, Signature

[Apple Liu]

[Project Manager]

[Evoo Products Company,LLC]

Appendix-EVMFV2-Photos Photographs Constructional Details WIFI/BT/BLE Setup photo Model EVMFV2 FCC ID: 2ATQQ-EVMFV2 Photograph Conducted Emission Test Setup Test Site 1#

Photograph - Spurious Emissions Radiated Test Setup Below 30MHz Test Site 2#

Page 1 of 17 Appendix-EVMFV2-Photos For 30MHz-1000MHz Test Site 2#

For Above 1GHz Test Site 1#

Page 2 of 17