eSecuRD-UFO User Manual
(V1.0) ModeleSecuRD-UFO Excelsecu Data Technology Co., Ltd. All rights reserved www.excelsecu.com Table of Contents 1. Product Overview ...................................................................................................................... 3 2. Product Features ....................................................................................................................... 3 3. Product Specs ............................................................................................................................ 4 4. How to Use It ............................................................................................................................. 4 www.excelsecu.com 1. Product Overview eSecuRD-UFO Dual Interface Reader supports all contact/contactless cards that comply with ISO 7816 and ISO 14443 standards. It can be used in E-government, banking and payment, e-medical care, network security, access control, e-wallet and membership benefits, public transportation, etc. 2. Product Features USB 2.0 full speed interface CCID compliance Contactless smart card reader Built-in antenna for contactless tag access with card reading distance of greater than 40mm (depending on tag type) Supports ISO 14443 Type A and Type B cards Built-in anti-collision mechanism which allows access to only 1 contactless tag at any time Contact smart card reader Supports ISO 7816 CLASS A, B, C (5V, 3V, 1.8V) Short circuit protection www.excelsecu.com 3. Product Specs Product Dimension Power Supply Current Sheathing Material Indicator Light Connectivity Communication Rate with Host Drive Protocol Supported API Supported OS eSecuRD-UFO 116mm x 22mm USB Power Supply (5V) 200mA PC 3 LED indicators (Power/ Contact /
Contactless) Micro USB USB 2.0 FS (12Mbps) PS/SC PC/SC-API WINDOWS 7/8/10/Server-
2016/2012/2008/2003, Mac OS above 8 Contact Standard ISO 7816 CLASS A/B/C, T=0 Contactless Standard ISO 14443 Type A/B Durability C4/C8 Communication Frequency Communication Range Operating Temperature Storage Temperature Cards can be inserted and pulled out 100,000 times
-
13.56MHz 4cm 0 ~+60
-10 ~+70 Operating Humidity 10%-90% (non-condensing) 4. How to Use It 1. Connect the reader to the USB port to power on, the red light is on. 2. Put the contactless card onto the reader or insert the contact card into the reader. www.excelsecu.com 3. When the light flashes, it means the card and the reader is performing data communication (blue light for contact, green light for contactless). The table below shows the detailed status of reader Light color Red
(Power) Blue
(Contact) Green
(Contactless) Light status Red off Red on Blue on Blue flashing Blue off Green on Green flashing Green off explanation Power off Power on Card inserted Contact data communication No card inserted Card putted on reader Contactless data communication No card putted on reader eSecuRD-UFO doesnt support using contactless and contact at the same time. The design is when inserted a contact card, the contactless interface will be blocked, and vice versa. www.excelsecu.com FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. www.excelsecu.com RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. www.excelsecu.com