FCC ID: VQ6CMEXPO3R AUX BLUETOOTH RECEIVER

Owners manual DOMESTIC Bluetooth TRANSCEIVER SYSTEM Bluetooth AUDIO TRANSCEIVER CRADLE/iPod nano ADAPTOR/GAP FILLER Bluetooth AUDIO TRANSMITTER Bluetooth AUDIO TRANSCEIVER FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-

stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. EXP03R This manual is published by Exposure Electronics Ltd., without any warranty. Improve-

ments any changes to this manual necessitated by typographical errors, inaccuracies of current information or improvements to programs and/or equipment, may be made by Exposure at any time and without notice. Such changes will, however, be incorporated into new editions of this manual. iPod is for legal or right holder-authorised copying only. Dont steal music. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Exposure Electronics Ltd. is under license. Other trademarks and trade names are those of their respective owners. E X P 0 3 R CONTENTS 1. WHAT IS INCLUDED IN EXP03R? .................................................... R4 2. PRODUCT FEATURES OVERVIEW .................................................. R4 Exposure Bluetooth Audio Transceiver .............................................R4 3. UNIT SETUP ....................................................................................... R5 Setting Up EXP03R ............................................................................R5 Attaching Bluetooth Audio Transmitter to the EXP03R .....................R8 Detaching Bluetooth Audio Transmitter to the EXP03R .................. R9 4. OPERATIONS FOR Bluetooth AUDIO TRANSCEIVER ................ R10 Understanding The Main Indicators For EXP03R ............................ R11 Basic Operations ............................................................................ R11 5. COMPATIBLE DEVICE ..................................................................... R13 6. TROUBLESHOOTING ...................................................................... R14 7. SPECIFICATIONS ............................................................................. R16 8. PRECAUTIONS ................................................................................ R17 9. EXPOSURE WARRANTY POLICY .................................................. R20 EXP03R R3 1. WHAT IS INCLUDED IN EXP03R?

A complete EXP03R package consists of the following items:

E X P 0 3 R EXP03R - Bluetooth Audio Transceiver AC/DC Convertor 2. PRODUCT FEATURES OVERVIEW Exposure Bluetooth Audio Transceiver The Bluetooth Audio Transceiver (EXP03R) is a product featuring Bluetooth wireless technology that allows you to stream high quality digital audio wirelessly from iPod or A2DP devices. It allows audio streaming to an amplier and speakers. R4 EXP03R 3. UNIT SETUP E X P 0 3 R Setting Up EXP03R Bluetooth Audio Transceiver 1. Plug in the DC12 volt jack from AC/DC Convertor to the Transceiver. Please see Figure 1. 2. Connect the RCA-L & RCA-R between the Transceiver analogue output and the home amplier input. 3. Plug the AC/DC Convertor into the wall socket & turn on the power. 4. Power on the Transceiver using the Power ON/OFF Switch at the back of Transceiver. 5. Pair and connect EXP03D with EXP03R. For more information on pairing, please refer chapter Pairing Sequence on page R10. 6. Follow the directions as shown in Figure 2 to slide in the Bluetooth Audio Transmitter to EXP03R. Note:

Please make sure that you have fully charged the EXP03D before performing pairing. EXP03R R5

[PAIRING]

button Main Indicator RCA Output DC Input Power ON/OFF Switch DC12V To Power Suppy 3. UNIT SETUP E X P 0 3 R To Home Amplifier Input

[RESET]

button RCA-L RCA-R RCA to RCA / RCA to Jack Cable (Not included) Figure 1 R6 EXP03R 3. UNIT SETUP E X P 0 3 R Figure 2 EXP03R R7 3. UNIT SETUP Attaching Bluetooth Audio Transmitter to the EXP03R You may charge your iPod and Bluetooth Audio Transmitter with EXP03R. It is recommended to setup EXP03D, EXP03C and iPod before attaching to EXP03R. Please refer to EXP03D owners manual for more information. E X P 0 3 R Battery Indicator Figure 3 the main power socket. Make sure EXP03R is in power on status. Instructions 1. Connect the EXP03R to the DC 12V convertor which should be plugged into 2. Follow the directions as shown in Figure 3 to slide in the Bluetooth Audio Transmitter to EXP03R. 3. Make sure the Bluetooth Audio Transmitter is fully tted into the EXP03R. The battery indicator will light up. R8 EXP03R 3. UNIT SETUP Battery Indicator (Red) Event No charging/

Charging complete Charging Note:

Audio streaming is not affected while EXP03D and iPod are charging. OFF ON E X P 0 3 R Detaching Bluetooth Audio Transmitter from the EXP03R You may remove the Bluetooth Audio Transmitter when it is fully charged and enjoy full wireless audio streaming experience. Figure 4 Instructions 1. Place and hold your ngers on the location as shown in Figure 4. 2. Slide out the Bluetooth Audio Transmitter to remove from the EXP03R. EXP03R R9 5. OPERATIONS FOR Bluetooth AUDIO TRANSCEIVER What is Bluetooth Wireless Technology Bluetooth wireless technology is a radio technology that connects devices, such as Bluetooth Audio Transmitter, without wires or cords over a short distance of approximately 7 metres (approx. 23 feet). Get more information at www.bluetooth.com. E X P 0 3 R What is Pairing You must pair the Transceiver unit with the phone/Bluetooth Audio Transmitter before you use it for the rst time. Pairing creates a unique wireless link between the Bluetooth Audio Transmitter and your Bluetooth Audio Transceiver unit eliminating the need to repeat the pairing process during future use. Bluetooth devices will not work if the devices have not been paired. What is A2DP?

A2DP (Advanced Audio Distribution Prole) is a Bluetooth prole that allows you to send high quality stereo music from one device to another without wires. A2DP is able to provide crystal clear music without the hassle of plugging cables. Bluetooth wireless technology with A2DP makes mobile phones, PDAs and computers capable of streaming music. Music streaming is a technique for transferring audio data such that it can be processed as a steady and continuous stream. Users can stream music from their iPod or other external audio player to their home system and listen to the tracks through the home systems speakers. R10 EXP03R 5. OPERATIONS FOR Bluetooth AUDIO TRANSCEIVER Understanding The Main Indicators For EXP03R Event During power on Powered/ready Bluetooth Pairing mode A2DP streaming Reset Main Indicator Red Blink once Blink once every 5 sec Blue

Blink once every 5 sec Blink once every 5 sec Blink rapidly Blink once Lights up for 1-2 sec E X P 0 3 R Basic Operations Pairing Sequence Between Bluetooth Audio Transceiver and Bluetooth Audio Transmitter 1. Press and hold the [PAIRING] button for 1 second or longer on the Bluetooth Audio Transceiver during power on to activate pairing mode. The Blue and Red indicators will toggle. 2. Activate Pairing mode on the Transmitter (EXP03D). Both devices will get paired and connected automatically. Music will stream automatically once connected.

* Please refer to the EXP03D Owners manual for more information about Bluetooth Audio Transmitter. EXP03R R11 E X P 0 3 R 5. OPERATIONS FOR Bluetooth AUDIO TRANSCEIVER Between Bluetooth Audio Transceiver and Mobile Phone 1. Press and hold the [PAIRING] button for 1 second on the Bluetooth Audio Transceiver during power on to activate Pairing mode. The main Blue and Red indicators will toggle. 2. Activate Bluetooth on your mobile phone. Please check your mobile phone owners manual for further details. 3. Search for new Bluetooth device on the mobile phone. The Transceiver units name is EXPOSURE_AS. 4. When attempting to connect to the Transceiver unit, the mobile phone will prompt for a passkey, enter the PIN: 0000. 5. Open your phones music player and play the songs. Audio will be streamed automatically through the speakers connected to Bluetooth AudioTransceiver. Notes:

Compatibility with other devices is not guaranteed. You are only allowed to connect one device at one time. The previously-connected device(s) may still hold the Transceiver information. Thus if the device initiates a Bluetooth connection when the Transceiver is in pairing mode, the connection may be successful. Reset The Transceiver Unit This function is used to restore to factory default setting and clear all the pairing information. 1. During power on mode, use a thin rod and press the [RESET] hole at the back of the unit to perform reset function. R12 EXP03R 5. OPERATIONS FOR Bluetooth AUDIO TRANSCEIVER E X P 0 3 R Reset Button Figure 6 Note:

Transceiver will remain as power on state after reset. 6. COMPATIBLE DEVICE Supported Audio Device with Bluetooth wireless technology Bluetooth Audio Transceiver (EXP03R) is especially designed for and works best with Exposure Bluetooth Audio Transmitter (EXP03D) and Cradle for iPod (EXP03C). Alternately, Phone with A2DP (stereo music streaming) prole is also supported. However, compatibility with these phones is not guaranteed. Please check your phones specication for supported proles. EXP03R R13 7. TROUBLESHOOTING E X P 0 3 R Problem The red or blue LED lights up all the time. Blue LED lights up all the time. Transceiver is not responding. There is no sound output when iPod is playing. i r e v e c s n a r T Cause Power-up failure The Transceiver may not have started upon power up. The Transceiver has malfunctioned due to some conicts such as multiple pairing at the same time. Speakers, power supply, iPod and Bluetooth Audio Transmitter

(EXP03D) are not connected properly. Speakers volume is set to minimum. Bluetooth connection is not established. Pairing information might be deleted at the Transceiver (EXP03R) The Transceiver

(EXP03R) might be connected to other audio device. Description 1. Power off and on the device until the blue LED blinks correctly. 2. Press the reset button. Power off and on the device until the blue LED blinks correctly. Please check that the speakers and components are connected correctly and securely. Please adjust the volume accordingly. Please make sure both EXP03R and EXP03D are in power on mode. If problem persists, please reset both devices and perform pairing again. Please disconnect other audio device. The Transmitter (EXP03D) will automatically connect once power on. R14 EXP03R 7. TROUBLESHOOTING Problem When trying to connect to Transceiver using phone/iPod , connection failed. r e v i e c s n a r T Cause There may be other de-

vices currently connect-

ed to the Transceiver. Only one device can be connected at one time. Phone or iPod (with EXP03D) has never been connected before. Description Disconnect other device and re-connect phone/

iPod. E X P 0 3 R Pair and connect the device to the Transceiver. EXP03R R15 8. SPECIFICATIONS E X P 0 3 R Compliance Proles Wireless range Sensitivity Data rate Antenna Compression/decom-

pression algorithm Bit rate Stereo audio Operating temperature Storage temperature Dimensions Weight Audio bandwidth Signal-to-Noise Ratio Analog output Voltage source Bluetooth 1.2 A2DP (stereo music streaming) Class 2: Up to 7m (line of sight)

- 80dBm Forward: 723kbps Reverse: 57kbps 2.45 GHz chip type SBC (sub-band coding) Variable (<350kbps typical) 16kHz-48kHz, 16bit (for music)

- 20C ~ 60C

- 20C ~ 60C Approx. 140mm (Width) x 32.7mm (Height) x 200 (Depth) Approx. 635g 30Hz - 20kHz

> 75dB Line level (1 Vrms) 12V DC R16 EXP03R 9. PRECAUTIONS Safe and efcient use of product Read this information before using this product. Changes or modications to this product not expressly approved by Exposure may void the users authority to operate the equipment. Please check for any exceptions, due to national requirements or limitations, in usage of equipment with Bluetooth wireless technology before using this product. Before operating the receiver, check that the operating voltage is identical with your local power supply. If you are not going to use the receiver for a long time, be sure to disconnect the receiver from the wall outlet. To disconnect the AC power cord, grasp the plug itself; never pull the cord. E X P 0 3 R Product care Do not expose your product to liquid or moisture or to humidity. Do not expose your product to extreme high or low temperatures. Do not expose your product to lit candles, cigarettes, or cigars, or to open ames etc. Do not drop, throw or try to bend the product as rough treatment could damage it. Do not use any other accessories than Exposure originals intended for use with this product. Use of non-original accessories may result in loss of performance, damage to the product, re, electric shock or injury. The warranty does not cover product failures which have been caused by use of non-original accessories. Do not attempt to disassemble your product. The product does not contain consumer serviceable or replaceable components. Only Exposure service partners should perform service. Do not keep the product in an area prone to dust and dirt. Only use a soft damp cloth to clean your product. EXP03R R17 9. PRECAUTIONS If you will not be using the product for a while, store it in a place that is dry, free from damp, dust and extreme temperatures. To reduce risk of electric shock, unplug the unit from any power source before attempting to clean it. E X P 0 3 R Radio frequency exposure This product is a radio transceiver. When in operation, it communicates with a mobile device featuring Bluetooth wireless technology by receiving and transmitting radio frequency (RF) electromagnetic elds (microwaves) in the frequency range 2400 to 2500 MHz. The output power of the radio transmitter is low, 0.001 watt. This product is designed to operate in compliance with the RF exposure guidelines and limits set by national authorities and international health agencies when used with any compatible mobile phone with Bluetooth wireless technology. Electronic equipment Most modern electronic equipment is shielded from RF energy. However, certain electronic equipment is not, therefore:

Do not use this product near medical equipment without requesting permission. If you are using any personal medical devices, e.g. a pacemaker or a hearing aid, please read in your mobile phones Users Guide for further information. Potentially explosive atmospheres Turn off your electronic device when in any area with a potentially explosive atmosphere. It is rare, but your electronic device could generate sparks. Sparks in such areas could cause an explosion or re resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. R18 EXP03R 9. PRECAUTIONS CAUTION!

If you want to dispose of this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. E X P 0 3 R EXP03R R19 E X P 0 3 R 10. EXPOSURE WARRANTY POLICY 1. The Exposure warranty entitles you to FREE repair of this unit for 1 year from the date of purchase. 2. The agent accepts no responsibility for defects arising from accident, misuse, abuse, wear and tear, neglect or through unauthorised adjustment and/or repair or replacement of any components, nor will they accept responsibility for damage or loss occurring during transit to or from the person making a claim under warranty. 3. The Exposure warranty covers:

Parts and labour costs for 1 year from the date of purchase. Please retain your original receipt as proof of purchase and purchase date. The guarantee is extended only to the original purchaser and is not transferable.

- NOT by post. When making claims under this warranty:

1. The equipment should be suitably packed and returned to the dealer from whom it was purchased, or directly to the local distributor, together with proof of purchase or a copy of the dated sales receipt. 2. If necessary the unit should be sent carriage pre-paid by a reputable carrier 3. No responsibility is accepted for the unit whilst in transit to the dealer or agent, and customers are advised to insure the unit against loss or damage whilst 4. The dealer or the agent shall notify the customer when the repairs have been completed. The customer must claim the goods within fourteen days from the date of notice, failing which; the Company reserves the right to impose storage charges. 5. The Company reserves the right to dispose of the equipment after 90 days from the date of notice in a manner that it sees t without compensation to the customer. in transit. R20 EXP03R CRADLE/iPod nano ADAPTOR/GAP FILLER Bluetooth AUDIO TRANSMITTER FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. RF exposure warning The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. EXP03C and EXP03D This manual is published by Exposure Electronics Ltd., without any warranty. Improve-

ments any changes to this manual necessitated by typographical errors, inaccuracies of current information or improvements to programs and/or equipment, may be made by Exposure Electronics Ltd. at any time and without notice. Such changes will, however, be incorporated into new editions of this manual. iPod is for legal or right holder-authorised copying only. Dont steal music. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Exposure Electronics Ltd. is under license. Other trademarks and trade names are those of their respective owners. CONTENTS 1. WHAT IS INCLUDED IN EXP03C AND EXP03D? ...............................D4 2. PRODUCT FEATURES OVERVIEW ....................................................D5 Exposure Bluetooth Audio Transmitter (EXP03D) with iPod Cradle Support ...............................................................................................D5 3. UNIT SETUP .........................................................................................D6 Setting Up EXP03C and EXP03D .......................................................D6 4. OPERATIONS FOR Bluetooth AUDIO TRANSMITTER ....................D9 Buttons Terminology ............................................................................D9 Understanding The Transmitter Unit Indicators .................................D10 Basic Operations ............................................................................... D11 5. COMPATIBLE DEVICE .......................................................................D14 6. TROUBLESHOOTING ........................................................................D15 7. SPECIFICATIONS ...............................................................................D16 8. PRECAUTIONS ..................................................................................D17 9. EXPOSURE WARRANTY POLICY ....................................................D19 E X P 0 3 C E X P 0 3 D

EXP03C/EXP03D D3 1. WHAT IS INCLUDED IN EXP03C AND EXP03D?

A complete EXP03C package consists of the following items:

E X P 0 3 C E X P 0 3 D

Cradle iPod nano 2nd Gen Adaptor Gap Filler A complete EXP03D package consists of the following item:

Bluetooth Audio Transmitter D4 EXP03C/EXP03D E X P 0 3 C E X P 0 3 D

Auto-power off after 3 minutes of no activity state. iPod will auto-power off when Bluetooth Audio Transmitter (used with iPod Cradle) is powered off. Auto-connect with last paired device. 2. PRODUCT FEATURES OVERVIEW Exposure Bluetooth Audio Transmitter (EXP03D) with iPod Cradle Support The EXP03D is an Audio Transmitter featuring Bluetooth wireless technology that supports EXP03C to allow you to stream your favourite music from your iPod or alternative music source to your home system. Auto features:

Music streaming features:

Charging features:

The EXP03D can be used as:

iPod Transmitter with Bluetooth wireless technology You can dock your iPod onto the Transmitter unit (used with iPod Cradle) and stream music directly from your iPod to Bluetooth Audio Transceiver

(EXP03R). General purpose transmitter with Bluetooth wireless You can connect any external audio player to the Transmitter unit via an audio stereo cable. Music can be streamed through the Bluetooth Audio Transceiver (EXP03R). Music streaming from any music source (e.g. MP3 player, laptop) using audio stereo cable. Music streaming with iPod when used with iPod Cradle. Dual charging (Transmitter and iPod) when used with iPod Cradle. Uninterrupted streaming when charging. technology EXP03C/EXP03D D5 3. UNIT SETUP Setting Up EXP03C and EXP03D Bluetooth Audio Transmitter The EXP03D is designed to work with iPod Cradle (EXP03C) for ultimate wireless iPod playback support. The Transmitter unit can be latched with the iPod Cradle to form an iPod Bluetooth Audio Transmitter unit. 1. Slide in the Transmitter unit to the Cradle unit. Make sure the 14-pin outlet socket is connected properly. 2. Optional step for iPod Video model: Slide in the Gap ller for using 30GB iPod Video with Cradle (shown in Fig. 1). 60/80GB iPod Video is used without the adaptor Gap ller. 3. Optional step for iPod nano 2nd generation model: Slide in the iPod nano 2nd generation adaptor to the Cradle (shown in Fig. 2). 4. Dock the iPod to the Cradle. E X P 0 3 C E X P 0 3 D

Gap ller (For 30GB iPod Video only) iPod nano 2nd generation adaptor Cradle (For 30GB, 60GB and 80GB iPod Video) Cradle (For 30GB, 60GB and 80GB iPod Video) Cradle Gap ller (For 30GB iPod Video only) Figure 1: Use the iPod Cradle with D6 EXP03C/EXP03D Figure 2: The adaptor used is only compatible with 2nd generation of iPod nano. 3. UNIT SETUP Transmitter iPod Video

(not included) E X P 0 3 C E X P 0 3 D

iPod Video Cradle Figure 3: Use the EXP03D with iPod and iPod Cradle EXP03C EXP03C/EXP03D D7 E X P 0 3 C E X P 0 3 D

3. UNIT SETUP General purpose Bluetooth wireless transmitter 1. Select an external audio source (e.g. line-out of a laptop, PC or any MP3 player). The audio jack output for external source may vary depends on the device. 2. Use an audio stereo cable to connect the output of external audio source to the input (2.5mm stereo jack) of the Transmitter. Transmitter 2.5mm stereo jack External audio source

(not included) Audio stereo cable

(not included) Figure 3: Use the EXP03D with alternative audio source Note:

The Bluetooth Audio Transmitter will not be able to t into the EXP03R if connected to an external audio device through the 2.5mm stereo jack. D8 EXP03C/EXP03D 4. OPERATIONS FOR Bluetooth Buttons Terminology The Transmitter unit with Power/pairing button (with LEDs) and a reset switch. AUDIO TRANSMITTER

14-pin outlet socket

[RESET]

E X P 0 3 C E X P 0 3 D

USB mini-B port 2.5mm audio jack input

[ ] button Use the button to power on/off. During power on, use the button to perform Bluetooth pairing.

[RESET] switch Use the switch to reset the unit. USB mini-B port Charge the Transmitter with EXP03R through this port. 2.5mm audio jack input Connect to external audio player. 14-pin outlet socket Connect to iPod Cradle. EXP03C/EXP03D D9 4. OPERATIONS FOR Bluetooth AUDIO TRANSMITTER Understanding The Transmitter Unit Indicators E X P 0 3 C E X P 0 3 D

Event Red Blink 3 times Blink 3 times, Blink 1 more time after iPod is off Blink once every 5 sec During power on During power off Powered (No activity) Bluetooth pairing mode Receiver connected, Music streaming Battery Low Charging Charging completed Notes:

Blink refers to the LED is blinking brightly. Blink dimly refers to the LED is blinking not brightly. Blink twice every 4 sec On

Blink alternately LEDs Blue Lights up for 1-2 seconds Blink dimly until iPod is switched off (~ 2 sec) Blink dimly quickly Blink once every 5 sec Blink dimly quickly

On D10 EXP03C/EXP03D E X P 0 3 C E X P 0 3 D

4. OPERATIONS FOR Bluetooth AUDIO TRANSMITTER Basic Operations Please make sure you have read through the chapter Setting Up EXP03C and EXP03D on page D6 before proceed to the following operations. For iPod/external audio player operations, please refer to your corresponding product owners manual. Turning on/off the Transmitter power 1. Press the [ ] button once to power on. 2. Press and hold the [ ] button for 3 seconds or longer to power off. Note:

When the Transmitter is powered off, iPod will be turned off as well when used with iPod Cradle. Automatic power off Transmitter will be automatically powered off in the following situations:

Three minutes of inactivity or without any connected device to conserve energy. iPod will be turned off as well if it is connected to the Cradle. Battery is very low or exhausted. Note:

when battery is low. If the Transmitter is automatically shut down due to battery exhaustion, all pairing information will be erased. Thus, it is recommended to recharge the Transmitter Setting Up EXP03C and EXP03D on page D6.

(EXP03R) owners manual for more details. Activating Bluetooth Audio Transmitter pairing mode 1. Make sure the Transmitter is connected to an audio source. Please refer 2. Set EXP03R in pairing mode. Please refer to Bluetooth Audio Transceiver 3. Press the [ ] button once to power on. 4. Press the [ ] button again to activate Bluetooth pairing mode. 5. Music starts streaming automatically upon successful pairing. EXP03C/EXP03D D11 E X P 0 3 C E X P 0 3 D

If no device is paired after 3 minutes, pairing mode will be cancelled and 4. OPERATIONS FOR Bluetooth AUDIO TRANSMITTER Notes:

Transmitter unit will be shut down. You cannot pair the Transmitter with your mobile phone. During pairing mode, the Transmitter unit should show a quick alternate red/blue LED. Make sure that the Transmitter and Transceiver are not paired to any other Transceiver or Transmitter respectively. Please refer Understanding the Transmitter Unit Indicators on page D10 for further information. Music Streaming playback You can operate and control the iPod as normal. However, there is no volume control support from the analog output of 30-pin iPod connector interface. Changing the volume on the iPod through the wheel control will have no effect on the music streaming. Resetting the Transmitter unit This function is used to restore to factory default setting and clear all pairing information. 1. Press the [RESET] switch once to perform reset function. Device will be automatically powered off. Notes:

iPod will not be turned off in this case and iPod will not be reset. User needs to press the [ ] button again to restart the device. D12 EXP03C/EXP03D 4. OPERATIONS FOR Bluetooth AUDIO TRANSMITTER Charging the Transmitter The Transmitter can be charged by attaching it to the Bluetooth Audio Transceiver (EXP03R). Please refer EXP03R owners manual for more information. The charging time may require up to 2 hours for 8 hours of continuous music playing. Note:

Please charge the Transmitter for rst time usage.

CAUTION When charging the transmitter, please use with EXP03R only. Do not charge nearby re or under burning sun. Failure to follow these instructions may present risk of explosion, re, high temperature or injury. E X P 0 3 C E X P 0 3 D

Automatic Connection When the Transmitter is switched on, it will automatically try to re-connect with the last paired device (Transceiver unit). It may take several seconds for the re-connection. If there is no connection detected after 3 minutes, Transmitter will be automatically powered off. If the device (Transceiver unit) already has connection with another device, automatic connection will fail. Notes:

Transmitter to detect disconnection before re-connection. Music streaming may be discontinued if the Transmitter and Transceiver are moved out of range of each other. The wireless range may be affected when the battery is weak. Please recharge If the Transceiver is switched off and on, it may require 20-30 seconds for the the Transmitter for better experience. EXP03C/EXP03D D13 5. COMPATIBLE DEVICE Supported device with Bluetooth wireless technology Bluetooth Audio Transmitter (EXP03D) is especially designed for and works best with Exposure Bluetooth Audio Transceiver (EXP03R) and Cradle for iPod (EXP03C). Supported iPod models This Cradle (EXP03C) is especially designed for iPod Video and iPod nano 2nd generation. Supported other external audio player The audio player must be able to output audio to the 2.5mm audio jack input of this Transmitter unit. E X P 0 3 C E X P 0 3 D

D14 EXP03C/EXP03D 6. TROUBLESHOOTING Problem Cause Description During power off, the LED blinks whenever the on/off button is pressed. The device does not start up properly upon power up. Power on illusion It can be powered up after the button is pressed once. However, this sequence may fail sometimes. If it happens, release the button and retry again. Power on failure User may execute following steps to recover the situation. a) Press the [RESET] switch if b) Try to switch on the Transmitter again. the red LED is on. E X P 0 3 C E X P 0 3 D

EXP03C/EXP03D D15 7. SPECIFICATIONS Compliance Proles Wireless range Tx/Rx radio sensitivity Data rate Antenna Compression Compression ratio Bit rate Stereo audio Operating temperature Storage temperature Dimensions E X P 0 3 C E X P 0 3 D

Bluetooth 1.2 A2DP (stereo music streaming) Class 2: Up to 7m (line of sight)

-80dBm Forward: 723kbps Reverse: 57kbps 2.45 GHz chip type SBC (sub-band coding) 4:1-6:1 typical Programmable (<350kbps typical) 16kHz-48kHz, 16bit (for music)

-20C~60C (Discharging) 10C~60C (Charge)

-20C~50C (Within 30 days) Approx. 35mm (Width) x 74mm (Height) x 10mm

(Depth) Approx. 26g 30Hz-20kHz

~84dB Line level (1 Vrms) 3.7V 60mA Weight Audio bandwidth Signal-to-Noise Ratio Analog in Voltage Max current Battery life (full running) ~8hr on 3.7v 500mAh polymer lithium ion battery

~2hr on 3.7v 500mAh polymer lithium ion battery Charging time Power source 4.5-6.5V DC

CAUTION Please strictly follow temperature range as above. Product might not work correctly during extremely hot or cold condition. Product will work correctly after back to normal temperature. D16 EXP03C/EXP03D 8. PRECAUTIONS E X P 0 3 C E X P 0 3 D

Safe and efcient use Read this information before using this product. Changes or modications to this product not expressly approved by Exposure may void the users authority to operate the equipment. Please check for any exceptions, due to national requirements or limitations, in usage of equipment with Bluetooth wireless technology before using this product. Product care Do not expose your product to liquid or moisture or to humidity. Do not expose your product to extreme high or low temperatures. Do not expose your product to lit candles, cigarettes, or cigars, or to open ames etc. Do not drop, throw or try to bend the product as rough treatment could damage it. Do not use any other accessories than Exposure originals intended for use with this product. Use of non-original accessories may result in loss of performance, damage to the product, re, electric shock or injury. The warranty does not cover product failures which have been caused by use of non-original accessories. Do not attempt to disassemble your product. The product does not contain consumer serviceable or replaceable components. Only Exposure service partners should perform service. Do not keep the product in an area prone to dust and dirt. Only use a soft damp cloth to clean your product. To reduce risk of electric shock, unplug the unit from any power source before attempting to clean it. If you will not be using the product for a while, store it in a place that is dry, free from damp, dust and extreme temperatures. EXP03C/EXP03D D17 8. PRECAUTIONS This Product uses the lithium ion battery

CAUTION E X P 0 3 C E X P 0 3 D

Do not use or store this product near sources of heat such as a re or heater. Do not use or store this product where is exposed to extremely hot, such as under direct sunlight in a hot day. Otherwise, this product may be overheated. This can also reduce product performance and/or shorten service life. Do not use any chargers other than those recommended by Exposure. Do not attempt to disassemble or modify this product in any way. Do not recharge this product near a re or in extremely hot conditions. In case there are chemical leaking from product, please prevent any contact with skin or eyes. If contact happen, dont rub, wash with clean water and get medical treatment. Do not drive a nail, hammered and trample. It will cause leak on the lithium ion battery inside this product. Do not use this product in case there are any deformation of shape on the product. Please contact your Exposure local dealer. Do not put inside the heating machine (Ex. Microwave) or high pressure machine/washing machine. Failure to follow above instructions will present risk of internal battery leaking, generation of heat, damage, re, injury or soiled to surround.

CAUTION If you want to dispose of this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. D18 EXP03C/EXP03D from the date of purchase. 9. EXPOSURE WARRANTY POLICY 1. The Exposure warranty entitles you to FREE repair of this unit for 1 year 2. The agent accepts no responsibility for defects arising from accident, misuse, abuse, wear and tear, neglect or through unauthorised adjustment and/or repair or replacement of any components, nor will they accept responsibility for damage or loss occurring during transit to or from the person making a claim under warranty. 3. The Exposure warranty covers:

Parts and labour costs for 1 year from the date of purchase (excluding battery: 6 months warranty for battery). Please retain your original receipt as proof of purchase and purchase date. The guarantee is extended only to the original purchaser and is not transferable. E X P 0 3 C E X P 0 3 D

- NOT by post. When making claims under this warranty:

1. The equipment should be suitably packed and returned to the dealer from whom it was purchased, or directly to the local distributor, together with proof of purchase or a copy of the dated sales receipt. 2. If necessary the unit should be sent carriage pre-paid by a reputable carrier 3. No responsibility is accepted for the unit whilst in transit to the dealer or agent, and customers are advised to insure the unit against loss or damage whilst 4. The dealer or the agent shall notify the customer when the repairs have been completed. The customer must claim the goods within fourteen days from the date of notice, failing which; the Company reserves the right to impose storage charges. 5. The Company reserves the right to dispose of the equipment after 90 days from the date of notice in a manner that it sees t without compensation to the customer. in transit. EXP03C/EXP03D D19 Exposure Electronics Ltd. 59 North Street, Portslade, Sussex, BN41 1DH. UK. Phone: 0044 (0) 1273 423 877 Fax: 0044 (0) 1273 430 619 http://www.exposurehi.com e-mail: info@exposurehi.com Printed in Malaysia EXP-280-001