submitted | available | document details (if available) | source link |
---|---|---|---|
January 11 2020 | January 11 2020 | Microsoft PowerPoint - Fennec Watch One User Manual v1.0.pptx fishe GPL Ghostscript 9.06 |
various | User Manual | Users Manual | 727.33 KiB | January 11 2020 |
Fennec Watch One Fennec Watch One Fennec Fennec Watch One Watch One Smartwatch FW001 User Manual Version 1.0 Please find the latest version of this user manual at https://www.fennec.me/user-manual/FW001EN/
1. Package Contents 1. Package Contents 1. Package Contents 1. Package Contents Check to make sure your package contains the following:
Fennec Watch One User manual USB cable for charging and data transfer SIM card cover tool Screwdriver Extra screws for the SIM card cover 2222. Components and Appearance Components and Appearance Components and Appearance Components and Appearance 1.39 AMOLED color screen Speaker Rotatable camera
(rotates 90) Power & Android home button
(Long press to power on/off) Mic Android back button Front Front Front Front BackBackBackBack Contact point for charging /
data transmission Micro SIM card slot
(under cover) Do not bend the strap outward;
this may damage the built-in antennas. Phone / Bluetooth /
Wi-Fi / GPS antennas
(inside strap) 3. Charging the Watch /
3. Charging the Watch /
3. Charging the Watch /
3. Charging the Watch /
Accessing the watchs internal storage from a computer Accessing the watchs internal storage from a computer Accessing the watchs internal storage from a computer Accessing the watchs internal storage from a computer Charging the watch Charging the watch Charging the watch Charging the watch Connect the USB cable to the watch as shown, then plug the cable into a USB adapter to charge the watch. Accessing the watchs internal storage Accessing the watchs internal storage Accessing the watchs internal storage Accessing the watchs internal storage Connect the USB cable to a PC or Mac to access the watchs internal storage. The watch will also charge when connected. 4. Installing a SIM card 4. Installing a SIM card 4. Installing a SIM card 4. Installing a SIM card 1. Unscrew the SIM card cover screw. Is a SIM card necessary?
Is a SIM card necessary?
Is a SIM card necessary?
Is a SIM card necessary?
2. Use the included tool or a pin to lift off the cover. Unscrew this 3. Insert a micro SIM card into the slot, then put the SIM card cover and screw back into place. Tighten the screw until snug.
* The watch supports a 4G or 3G micro SIM card. If you dont need phone calling or always-on connectivity, you may not need a SIM card. The watch works like a normal watch without a SIM card. Without a SIM card:
The watch can still connect to the Internet via Wi-Fi. However, to conserve power, the watch will not actively scan or connect to a Wi-Fi network. You need to manually connect to a Wi-Fi network. For more details, refer to Section 9: Best Practices for Best Practices for Best Practices for Best Practices for Using the Fennec Watch Using the Fennec Watch. Using the Fennec Watch Using the Fennec Watch You will not be able to manage the watch from a phone if the watch is not connected to the Internet. Locating the watch from a parents phone may be unresponsive or less accurate, as the watch relies on cellular signal to improve triangulation accuracy. If the watch is not connected to the Internet, a parent will not be able to locate the watch. 5. Setting Up the Fennec Watch 5. Setting Up the Fennec Watch 5. Setting Up the Fennec Watch 5. Setting Up the Fennec Watch The Fennec Watch needs a parents help to set it up. On the parents phone:
On the parents phone:
On the parents phone:
On the parents phone:
If you have not yet installed Fennec If you have not yet installed Fennec If you have not yet installed Fennec If you have not yet installed Fennec Messenger on your phone:
Messenger on your phone:
Messenger on your phone:
Messenger on your phone:
You can scan this QR code to install the Fennec Messenger app, or just search for Fennec Fennec Fennec Fennec Messenger Messenger on Google Play or Messenger Messenger the App Store. After downloading it, launch the Fennec Messenger app and follow the instructions that appear to create your account, your childs account, and set up the watch. A QR code of your childs account will appear on A QR code of your childs account will appear on A QR code of your childs account will appear on A QR code of your childs account will appear on the screen the screen for you to link to the watch. the screen the screen If you have installed Fennec Messenger on If you have installed Fennec Messenger on If you have installed Fennec Messenger on If you have installed Fennec Messenger on your phone, but have not yet created a your phone, but have not yet created a your phone, but have not yet created a your phone, but have not yet created a child account:
child account:
child account:
child account:
Please go to the Settings tab in Fennec Messenger and create a child account. After creating a child account, follow the instructions to set up the watch. A QR code of your A QR code of your A QR code of your A QR code of your childs account will childs account will childs account will childs account will appear on the appear on the appear on the appear on the screen screen for you to link screen screen to the watch. 2. 1. iPhone Android phone If you have installed Fennec If you have installed Fennec If you have installed Fennec If you have installed Fennec Messenger and have created a Messenger and have created a Messenger and have created a Messenger and have created a child account, but have not yet child account, but have not yet child account, but have not yet child account, but have not yet linked the child account to the linked the child account to the linked the child account to the linked the child account to the watch:
watch:
watch:
watch:
In Fennec Messenger, go to the Settings tab, select the child account, then tap Add watch Add watch Add watch Add watch
(iPhone) or Bind a watch Bind a watch Bind a watch Bind a watch
(Android). A QR code of your childs A QR code of your childs A QR code of your childs A QR code of your childs account will appear on the account will appear on the account will appear on the account will appear on the screen screen for you to link to the screen screen watch. On the Fennec Watch On the Fennec Watch On the Fennec Watch On the Fennec Watch Please charge the watch for at least 3 hours before setting it up. The watch needs an Internet connection
(through cellular data or Wi-Fi) to complete the initial setup. 1. Press and hold the power button to turn it on. 2. If you have inserted a SIM card, the setup wizard will check for an Internet connection automatically. 3. If the Internet is not available even with a SIM card installed, or if there is no SIM card in the watch, the setup wizard will guide you through connecting to a Wi-Fi network. 4. If the Internet is available, the setup wizard will ask you to scan your phone for the QR code of your childs your childs Fennec Messenger your childs your childs account. NOTENOTENOTENOTE: Please scan the QR code of your childs childs childs childs account, notthe QR code of a parent account. If account account account you dont know where to find the QR code for your childs account, please follow the instructions in On the parents phone On the parents phone in the previous pages. On the parents phone On the parents phone 5. After using the watch to scan the QR code of your childs account, the child account should be linked to the watch. Having trouble setting up the watch?
Having trouble setting up the watch?
Having trouble setting up the watch?
Having trouble setting up the watch?
Try moving to a place where you have better cellular or Wi-Fi signal, press and hold the power button to reboot the watch, then try again. Linking the watch to another account Linking the watch to another account Linking the watch to another account Linking the watch to another account If you accidentally link the watch to the wrong account (e.g. a parents account instead of your childs account), or you if want to move the watch to another account, you will need to reset the watch. Before resetting the watch, back up any personal files you have on the watch, including any photos, music, ring tones, or watch faces you may have saved on it. Make sure the watchs battery is charged, then reset the watch by opening the Settings Settings Settings Settings app on the watch, then tapping Reset watch Reset watch. Reset watch Reset watch The reset process will take around 5 minutes. After resetting the watch, the watch will boot up and the setup wizard will appear. Please follow the instructions that appear to link the watch to another account. 6. Quick Tutorial 6. Quick Tutorial 6. Quick Tutorial 6. Quick Tutorial 7. Backing Up Your Photos / Customizing Your Watch 7. Backing Up Your Photos / Customizing Your Watch 7. Backing Up Your Photos / Customizing Your Watch 7. Backing Up Your Photos / Customizing Your Watch Windows PC Windows PC Windows PC Windows PC Connect the watch to a Windows PC using the watchs USB cable. Fennec > Phone storage This PC > Fennec Open File Manager on the PC, navigate to This PC Phone storage. You will find the Phone storage Fennec This PC This PC Fennec Phone storage file folders on the watch. Photos / Videos Photos / Videos Photos / Videos Photos / Videos Your photos and videos are stored in the DCIM/Camera DCIM/Camera folder. You can back up files in this DCIM/Camera DCIM/Camera folder to your PC. Music:Music:Music:Music:
You can add music files to your watch by copying mp3 files to the MusicMusicMusicMusic folder. Ringtones Ringtones:
Ringtones Ringtones You can add customized ringtones by copying mp3 files to the Ringtones Ringtones folder, then selecting your Ringtones Ringtones customized ringtone on your watch from Settings Settings >
Settings Settings Sound > Watch ringtone Sound Watch ringtone. Sound Sound Watch ringtone Watch ringtone Watch Faces:
Watch Faces:
Watch Faces:
Watch Faces:
You can put your watch faces in the clockskin clockskin clockskin clockskin folder. The watch face files must be in .watch format
(with file extension .watch
.watch). watch
.watch Apple Mac Apple Mac Apple Mac Apple Mac You will need a 3rd-party app on your Mac to connect to the watch. We recommend using the Android File Transfer Android File Transfer app (https://www.android.com/filetransfer/ ). Android File Transfer Android File Transfer Using Android File Transfer Android File Transfer, you will be able to browse the file folders on the watch. Android File Transfer Android File Transfer Photos / Videos Photos / Videos Photos / Videos Photos / Videos Your photos and videos are stored in the DCIM/Camera DCIM/Camera folder. You can back up files in this folder DCIM/Camera DCIM/Camera to your PC. Music:Music:Music:Music:
You can add music files to your watch by copying mp3 files to the MusicMusicMusicMusic folder. Ringtones Ringtones:
Ringtones Ringtones You can add customized ringtones by copying mp3 files Ringtones folder, then selecting your customized to the Ringtones Ringtones Ringtones ringtone on your watch from Settings Settings > Sound Sound > Watch Watch Settings Watch Watch Settings Sound Sound ringtone ringtone. ringtone ringtone Watch Faces:
Watch Faces:
Watch Faces:
Watch Faces:
You can put your watch faces in the clockskin clockskin folder. The clockskin clockskin watch face files must be in .watch format (with file extension .watch
.watch). watch
.watch 8. Maximizing Battery Life 8. Maximizing Battery Life 8. Maximizing Battery Life 8. Maximizing Battery Life The battery of a smartwatch is much smaller than a mobile phone. We have taken tremendous efforts to optimize battery life so that the Fennec Watch can last for a days use. With a SIM card inserted, the standby time of the watch can be as long as 30 hours or more.*
However, if you frequently use applications on the watch, the battery may drain faster. High power consumption applications High power consumption applications High power consumption applications High power consumption applications Below are examples of high power consumption applications for your reference:
Video calling:
Video calling: 2% battery use per minute if Video calling:
Video calling:
using mobile data. Playing music over Bluetooth Playing music over Bluetooth: 0.5%~1% battery Playing music over Bluetooth Playing music over Bluetooth use per minute with a SIM card installed. Games/Camera Games/Camera: 0.5%~1% battery use per Games/Camera Games/Camera minute with a SIM card installed. The battery may drain faster when The battery may drain faster when The battery may drain faster when The battery may drain faster when there is poor cellular signal there is poor cellular signal there is poor cellular signal there is poor cellular signal No cellular signal:
No cellular signal: The watch will continuously No cellular signal:
No cellular signal:
search for a cellular signal, consuming power. Poor cellular signal:
Poor cellular signal: The watch will Poor cellular signal:
Poor cellular signal:
continuously connect and reconnect to the network, consuming power. The Fennec Watch has a built-in battery saver. When it detects that the watch is in an area with poor or no cell coverage, it shuts down the mobile data connection or even the cell radio on the watch. The watch will then try to reconnect back to the cellular network every 3~10 minutes. This greatly improves the standby time of the watch, but it also means that the watch will lose contact temporarily when there is poor cellular signal.
* Disclaimer: Standby time may vary depending on mobile/Wi-Fi signal strength and the watch settings. Best practices for maximizing battery life Best practices for maximizing battery life Best practices for maximizing battery life Best practices for maximizing battery life Enable flight mode when cellular signal is Enable flight mode when cellular signal is Enable flight mode when cellular signal is Enable flight mode when cellular signal is poor poor: : : : Although the watch has a built-in battery poor poor saver that shuts down the cellular connection automatically when cellular signal is poor, it may not be activated if the cell signal is not weak or unstable enough. You may want to enable flight mode if the watch will be in a place without good cellular signal for a while, such as in a locker or basement. Enable flight mode during school hours Enable flight mode during school hours: A Enable flight mode during school hours Enable flight mode during school hours parent can enable time restrictions and set the watch to use flight mode during school hours. This limits your childs access to Fennec Messenger & the Fennec Watch, helping your child concentrate on school activities and extending the watch battery. To configure this, open the Fennec Messenger app on a parents phone and go to Settings Settings >
Settings Settings Your childs name-> Time restrictions Time restrictions to set it Time restrictions Time restrictions up. Turn off Wi----Fi & Bluetooth when they are Turn off Wi Fi & Bluetooth when they are Turn off Wi Turn off Wi Fi & Bluetooth when they are Fi & Bluetooth when they are not in use not in use: : : : If Wi-Fi or Bluetooth are turned not in use not in use on but not connected, the watch will continuously scan for a possible connection, consuming power. To maximize your battery life, turn off Wi-Fi when away from home and there is no available Wi-Fi network to connect to. Additionally, turn off Bluetooth after you are done listening to music over a Bluetooth connection. Turn off Wi-Fi & Bluetooth when they are not in use Close apps when they are not in use Close apps when they are not in use: : : : Apps Close apps when they are not in use Close apps when they are not in use may continue to consume power even when they are not in use, especially for the Phone Phone Phone Phone and Pedometer Pedometer apps. A best practice for Pedometer Pedometer longer battery life is to close apps when they are not in use. To close apps:
1. Long press the power button. 2. Tap Recent Tasks. 3. Swipe apps off of the screen to close them. Set Power saving mode at 5%:
Set Power saving mode at 5%: When the Set Power saving mode at 5%:
Set Power saving mode at 5%:
battery level drops to the configured level, power saving mode will be enabled, and the watch will enter flight mode to conserve power. This is to ensure the best user experience the remaining power will allow to still check the time, and it can last for a long time. We suggest configuring power saving mode to activate when at 5% battery remaining. This will keep the watch connected for as long as possible while leaving enough power for the time-only function to work after entering power saving mode. To set up when power saving mode will be activated:
On a parents phone:
On a parents phone: In the Fennec Messenger On a parents phone:
On a parents phone:
Settings > Your childs name>
app, go to Settings Settings Settings Watch settings > Power saving Watch settings Power saving Watch settings Watch settings Power saving Power saving On a childs phone: In the Fennec Messenger On a childs phone:
On a childs phone:
On a childs phone:
app, go to Settings Settings > Watch settings Watch settings > Power Power Settings Settings Power Power Watch settings Watch settings saving saving saving saving Settings > Power On a Fennec Watch: Go to Settings On a Fennec Watch Power Settings On a Fennec Watch On a Fennec Watch Settings Power Power saving saving saving saving 9. Best Practices for Using the Fennec Watch 9. Best Practices for Using the Fennec Watch 9. Best Practices for Using the Fennec Watch 9. Best Practices for Using the Fennec Watch Connecting to Wi Connecting to Wi----FiFiFiFi Connecting to Wi Connecting to Wi Data Synchronization Data Synchronization Data Synchronization Data Synchronization To save the watch battery, the Wi-Fi system on the watch is optimized - If the watch is not connected to a Wi-Fi network, it will not scan for Wi-Fi signals or connect to an available Wi-
Fi network automatically. You will have to manually connect to a Wi-Fi network. If Wi-Fi is on, simply turn on the screen, then the watch will scan for available Wi-Fi networks and will connect to an available network automatically. If Wi-Fi is off, you have to turn Wi-Fi back on first. The watch will scan for available Wi-Fi networks and will connect to an available network automatically. To save the watch battery, remember to turn off the Wi-Fi when its not in use e.g. when you are away from home and there is no Wi-Fi network to connect to. When a parent or a child changes the watchs settings from their phonessuch as updates to phonebook entries, power saving, or other watch settingsthose changes will be delivered to the watch immediately over the Internet. If the watch is temporarily offline, the settings will be synchronized automatically after the watch goes online. However, to avoid missed communication due to unforeseen reasons, the watch will synchronize its settings with our server when its being charged. Please make sure that the watch is connected to the Internet while its being charged so that the settings can be synchronized. Waterproof Waterproof Waterproof Waterproof The watch is not fully waterproof. Do not rinse or immerse the watch in water. 10. Account/Watch Management 10. Account/Watch Management 10. Account/Watch Management 10. Account/Watch Management If Your Fennec Watch is Lost or Stolen If Your Fennec Watch is Lost or Stolen If Your Fennec Watch is Lost or Stolen If Your Fennec Watch is Lost or Stolen You can remove the watch from your childs account. To do so, on a parent/administrators phone, open the Fennec Messenger app and go Settings > Your childs name> Remove this to Settings Remove this Settings Settings Remove this Remove this watchwatchwatchwatch. Changing the Child Account on the Changing the Child Account on the Changing the Child Account on the Changing the Child Account on the WatchWatchWatchWatch Please reset the watch so the setup wizard will appear after the watch is restarted. Before resetting the watch, back up any personal files you have on the watch, including any photos, music, ring tones, or watch faces you may have saved on it. Settings app on Reset the watch by opening the Settings Settings Settings the watch, then tapping Reset watch Reset watch. The reset Reset watch Reset watch process will take around 5 minutes. After resetting the watch, the watch will boot up and the setup wizard will appear. Please follow the instructions that appear to link the watch to another account. Removing a Child Account from the Removing a Child Account from the Removing a Child Account from the Removing a Child Account from the WatchWatchWatchWatch If you want to give the Fennec Watch to another person, you will need to remove your childs account from the watch. To do so, just simply reset the watch as per the instructions in Changing the Child Account on the Watch Changing the Child Account on the Watch. Changing the Child Account on the Watch Changing the Child Account on the Watch Replacing a Watch for a Child Account Replacing a Watch for a Child Account Replacing a Watch for a Child Account Replacing a Watch for a Child Account If you want to replace your childs Fennec Watch with a new one, follow these steps:
1. On a parent/administrators phone, open the Fennec Messenger app and go to Settings Settings >
Settings Settings Your childs name> Replace this watch Replace this watch. Replace this watch Replace this watch 2. A QR code of your childs account will appear on the screen for you to link to the new watch. 3. Follow the steps described in On the Fennec On the Fennec On the Fennec On the Fennec WatchWatchWatchWatch in Section 5: Setting Up the Fennec Setting Up the Fennec Setting Up the Fennec Setting Up the Fennec WatchWatchWatchWatch in this manual to set up the watch. Resetting a Watch Resetting a Watch Resetting a Watch Resetting a Watch If for some reason you need to reset the watch and link your childs account to the watch again, please follow these steps:
Settings app 1. Reset the watch by opening the Settings Settings Settings on the watch, then tapping Reset watch Reset watch. The Reset watch Reset watch reset process will take around 5 minutes. Note: Before resetting the watch, back up any personal files you have on the watch, including any photos, music, ring tones, or watch faces you may have saved on it. 2. On a parent/administrators phone, open the Fennec Messenger app and go to Settings Settings >
Settings Settings Your childs name> Replace this watch Replace this watch. Replace this watch Replace this watch 3. A QR code of your childs account will appear on the screen for you to link to the watch. 4. Follow the steps described in On the Fennec On the Fennec On the Fennec On the Fennec WatchWatchWatchWatch in Section 5: Setting Up the Fennec Setting Up the Fennec Setting Up the Fennec Setting Up the Fennec WatchWatchWatchWatch in this manual to set up the watch. 11. Technical Specifications 11. Technical Specifications 11. Technical Specifications 11. Technical Specifications Product name Model name Dimensions Weight Display Camera Standby time Network SIM Battery Memory Processor Operating System Charging cable Fennec Watch One FW001 46 x 56 x 17 mm 60g 1.39" full circular AMOLED 400 x 400 pixels 2 million pixels With SIM inserted / using mobile data: ~30 hours With SIM inserted / using Wi-Fi: ~30 hours Screen on: ~3 hours Listening to music with a Bluetooth headset: ~3 hours
*Disclaimer: Standby times will vary depending on different settings and locations WCDMA 850 / 1900 /
GSM 850 / 1900 Wi-Fi 802.11n Bluetooth 4.0 Nano SIM Compatible with 4G/3G/2G SIM 380 mAh RAM: 512 MB Storage: 4 GB MT6580 quad core Built-in GPS and G-sensor Android 5.1 4 pin magnetic USB charger cable, 5V DC 12. Compliance Statements 12. Compliance Statements 12. Compliance Statements 12. Compliance Statements FCC Statements: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Fennec Corp. could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value.Before a new model device is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each device are performed in positions and locations (e.g. at the ear and worn on the body)as required by the FCC. For faceup,10mm was used for test, this equipment should be installed and operated with minimum distance 10mm. For limb worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal. Noncompliance with the above restrictions may result in violation of RF exposure guidelines. 13. Warranty 13. Warranty 13. Warranty 13. Warranty Fennec Corp. warrants this product to be free from defects in materials and workmanship under normal use for the period of 1 year from the date of purchase and should be provided as evidenced with purchase invoice. Please read the Fennec Limited Warranty carefully before using the product. https://www.fennec.me/warranty/FennecWatchOne.html Model Name:
FW001 Date of Purchase:
Purchased from:
This product uses the FCC Data API but is not endorsed or certified by the FCC