FCC ID: ZMOH330S UMTS/HSPA+ Module

Tel: 408-526-1188 Fax: 408-526-1088 Email: sales.eaw@us.bureauveritas.com 775 Montague Expressway Milpitas, CA 95035 Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Revised wording (obsolete) Updated company template (obsolete) Updated letter information (obsolete) Added FCC ID field (obsolete) Updated company name & logo (current) Revision History To 1.0 2.0 3.0 4.0 5.0 6.0 From 1.0 1.0 2.0 3.0 4.0 5.0 Approved Date Nov-14-2006 Sept25-2007 Jan-31-2012 May-23-2014 Sep-16-2014 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 July 10, 2019 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, Fibocom Wireless Inc. hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s):

FCC ID: ZMOH330S Product Description: UMTSHSPA+ Module Model: H330S Sincerely, _______________________ Amyee Qian / Certification Engineer Bureau Veritas 7Layers Communications Technology (Shenzhen) Co. Ltd Tel: +86 755 8869 6566 #1545 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0

Letter Head Federal Communications Commission 7435 Oakland Mills Road - Gate A Columbia, Maryland 21046 Date: July 2, 2019 Schematic Diagram Block Diagram Parts List Tune-up Procedure Operational Description Subject: Request for Confidentiality FCC ID: ZMOH330S To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, External Photos Internal Photos Test Setup Photos Users Manual XueShan Huang / Regulatory Principal Engineer Fibocom Wireless Inc. Tel: +86-755-26525092 E-mail: keith.huang@fibocom.com FIBOCOM

H330S-Q30-20 _V1.1 2019-06-12 NA 2019-06-28 IC/FCC ID V1.0 V1.1 FIBOCOM-SAL-WI-71-Form-02 Page 1 of 3 FIBOCOM-SAL-WI-71-Form-02 Page 2 of 3 S/N 0.5mm S/N 10 S/N SN IMEI 15 IMEI IMEI FIBOCOM-SAL-WI-71-Form-02 Page 3 of 3

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: sales.eaw@us.bureauveritas.com Modular Approval Declaration Letter Reason for Amendment (current / obsolete) Initial Release (Obsolete) Added IC Modular Letter (Obsolete) Add LMA and MA option (Obsolete) Revised per RSS Gen issue 3.0 (Obsolete) Removed Foot(2) (obsolete) Adding New note per KDB996369 D01 V01R03

(obsolete) Updated company template & Added text box (obsolete) Updated modular requirement (obsolete) Updated template to meet RSP 100 issue 10 (obsolete) Updated template to meet RSP 100 issue 11 (obsolete)) Revised the Modular Requirement statements

(obsolete) Updated template with BV logo (current) Revision History To 1.0 2.0 3.0 4.0 5.0 6.0 From 1.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 7.0 8.0 9.0 10.0 11.0 12.0 Approved Date Dec-04-2006 Feb 16 2009 April 14 2010 Jan 12 2011 July 19 2011 August 29 2011 Jan-31-2012 Sept 05 2014 Nov 20 2014 March 19 2015 July 28, 2016 June 26, 2019 SCS-F26 Modular Approval Letter Page 1 of 2 Rev 12.0 5/F, Tower A,Technology Building ,1057# Nanhai Blvd, Shenzhen, China Fibocom Wireless Inc. July 11, 2019

(UMTS/HSPA+ Module) FCC ID: ZMOH330S is seeking FCC Authorization as a The EUT meets the requirements for as detailed in KDB 996369. Compliance to each of the requirements is described below:

Single Modular Transmitter /

Single Modular Approval /

Single Limited Modular Transmitter (Please check one) Single Limited Modular Approval (Please check one) Item Modular requirement Yes No Please provide a detailed explanation if the answer is No. 1 2 3 4 5 6 7 8 Note:

(1)

(2)

(3) Have its own RF shielding Have buffered modulation/data inputs (if such inputs are provided) The modular transmitter must have its own power supply regulation. Meet the antenna requirements of section 15.203 Be tested in a stand-alone configuration, i.e., the antenna, AC or DC power and data input/output lines must be connected to the module but, the module must not be inside another case during testing. Be labeled with its own FCC ID number, and if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. The modular transmitter is manufactured so that the user can not influence the operation of the transmitter that will operate outside of the scope of the regulations. Address compliance with the Commission`s RF exposure limits in Sections 1.1310 and 2.1093. Yes Yes Yes Yes Yes Yes Yes Yes LMA may be granted when one or more of the requirements in the table above cannot be demonstrated. LMA will also be issued in those instances where applicants can demonstrate that they will retain control over the final installation of the device, such that compliance of the end product is assured. In such cases, an operating condition on the LMA for the module must state that the module is only approved for use when installed in devices produced by a specific manufacturer. When LMA is sought, the application for equipment certification must specifically state how control of the end product into which the module will be installed, and will be maintained, such that full compliance of the end product is always ensured. Please provide Clear and specific instructions describing the conditions, limitations and procedures for third-parties to use and/or integrate the module into a host device. For non-Software Defined Radio transmitter modules where software is used to ensure compliance of the device, technical description of how such control is implemented to ensure prevention of third party modification must be provided (see KDB 594280). Note 1: Compliance of a module in its final configuration is the responsibility of the applicant. A host device will not be considered certified if the instructions regarding antenna configuration provided in the original description, of one or more separately certified modules it contains, were not followed. Example: A separately certified low-power transceiver module using Bluetooth technology which is housed in a desktop computer, laptop or peripheral does not require the overall system to be recertified, if the desktop computer, laptop or peripheral, as a stand-alone unit, complies with all applicable technical standards. XueShan Huang / Regulatory Principal Engineer Fibocom Wireless Inc. Tel: +86-755-26525092 E-mail: keith.huang@fibocom.com SCS-F26 Modular Approval Letter Page 2 of 2 Rev 12.0

Fibocom Wireless Inc. 5/F,Tower A,Technology Building ,1057# Nanhai Blvd, Shenzhen, China Power of Attorney Date: July 2, 2019 To whom it may concern, Please be notified that I, XueShan Huang, have designated Amyee Qian of Bureau Veritas 7Layers Communications Technology (Shenzhen) Co. Ltd as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Amyee Qian of Bureau Veritas 7Layers Communications Technology

(Shenzhen) Co. Ltd on the matters relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. As defined in 47 CFR Ch. 1.U.S.C. 862, we further certify that neither the applicant nor any party to this application is subject to a denial to Federal benefits, including FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act. This authorization is limited to the product of as following:

FCC ID: ZMOH330S If you have any acknowledgement and response, please send it to Amyee Qian of Bureau Veritas 7Layers Communications Technology (Shenzhen) Co. Ltd directly. Should you have any question or comment regarding this matter, please have my best attention. Sincerely yours, XueShan Huang/ Regulatory Principal Engineer Fibocom Wireless Inc. Tel: +86-755-26525092 E-mail: keith.huang@fibocom.com FIBOCOM