1 HXEP202Operationinstruction Button Multifunctionalbutton +Button 2 USB chargeport(5V/1000mA) Red/green/blue light 3 Mic Button function Multifunctional button:
Short press is power on/long press for 3s is power off;long press 2s is reject a call
/switch call 1 and call 2/switch cellphone side and earbud side/reject 2nd call. Short press also is play/pause/answer call or hang up.Supportthirdpartycalls.
+button,shortpressisvolumeplus(BluetoothvolumesynchronizewithIOSlong pressisnexttrack;
button:short press is volume decrease,(Bluetooth volume synchronize with IOS),longpressisprevious. Longpress+and buttonatsametimefor5sisdisconnectbluetoothmodeand enterintopairingmode. LEDindicator:
1. Whenpoweron,greenlightflash3times;
2. When did not connect bluetooth,red and blue flash light fast 4 alternatively;connectbluetoothsuccessfully,bluelightflashslowly(every5sflash1 time);
3.Whencharging,redlightkeepson,fullycharged,redlightwillextinguish. Prompt tone:
BLUETOOTH CONNECTED (WhenconnectBluetooth) BLUETOOTH_DISCONNECT (Whendisconnectbluetooth) MAX VOLUME (Whenmaxvolume ) Low_power (Whenlowbattery) POWER_OFF_2017 (Whenpoweroff) POWER_ON_2017 (Whenpoweron) SEARCHING_BLUETOOTH (Whenpairing) When battery is 3.2V,low battery prompt tone start to play every 2.5 Minutes play one time.Whenbatteryvoltagelessthan3.1V,willpoweroffautomatically. Charge:use the DC5V/1000mA micro USB charge port charger to charge. Bluetoothsearchname:
LiveLoose When did not connect bluetooth for 2 minutes will power off automatically. When connect bluetoothsuccessfullyanddidnotplayfor15minuteswillpoweroffautomatically. Quiescentcurrent:lessthan15uA Bluetoothtransmissionrange:notlessthan15meters. Warning:
1. When do not use for long time,please check bluetooth speakers battery capacity.If low battery,please charge battery on time.Long time no use with low batteryconditionwillinfluencethebatterylife. 2. Pleasedonotchargebatteryforlongtime,longtimechargebatterymaybewill damagebattery. 3. Pleasedonotusethisproductinhumidenvironment. 4. Pleasedonotusethisproductinhightemperatureenvironment. 5 FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ISEDCWarning This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d' Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. 6 Radio apparatus containing digital circuitry which can function separately from the operation of a transmitter or an associated transmitter, shall comply with ICES-003. In such cases, the labelling requirements of the applicable RSS apply, rather than the labelling requirements in ICES-003. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. ISEDC Radiation Exposure Statement:
The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. Le prsent appareil est conforme Aprs examen de ce matriel aux conformit ou aux limites dintensit de champ RF, les utilisateurs peuvent sur lexposition aux radiofrquences et la conformit and compliance dacqurir les informations correspondantes.