WM1801 Bluetooth Speaker User manual

Use Manual ONA 18AA019ONA 18AA020ONA 18AA021 Mic Button + Play/Pause Blue/Red Light Button AUX IN port USB Charging port Indicator light Use Manual Button function Pause/Play:

Long press will power on and power off /reject the call/exchange between #1 call and

#2 call/ reject the second call. Short press will play/Pause and to answer the incoming call/Support the third parts calling

+button : volume +, BT volume that sync with IOS. Long press to go to the next track.

- button Volume-, BT volume that sync with IOS. Long press to got to the previous track. s Multi-Function Buttons Press + and - at the same time to disconnect the BT LED indicator 1When BT dont connect, Light Flash blue then red when pairing. When BT connected, Light Blue LED Flash 5seconds/time 2When charging the light will be a solid red and once done charging the light will turn off 3: When line-in blue light will slow flash 3seconds/time 4: Charging will use a charging with DC5V-300mA MicroUSB port to charge BT pairing name Black one Onn SPKR A019 Pink one Onn SPKR A020 Blue one Onn SPKR A021 If the Bluetooth does not connect, it will shutdown after 2 minutes. If connected to Bluetooth successfully 15 minutes non-operation, it will automatic shutdown. Static current: Less than 15uA Bluetooth transmission distance: not less than 10m Use Manual FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .