FCC ID: XHM-PB63D31 52F185V10000

by: FLYTECH TECHNOLOGY CO., LTD latest update: 2020-02-12 model: PB63D31

Forty Two grants have been issued under this FCC ID from 11/10/2016 to 02/12/2020 (this is one of fifteen releases in 2020 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked troubleshooting guides, password defaults, warrantee terms, drivers, & instructions.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various Host User Manual Users Manual pdf 601.63 KiB
various User Manual Users Manual pdf 601.16 KiB
various Users Manual Users Manual pdf 285.95 KiB December 10 2018 / November 04 2019
various Users Manual-Statement Users Manual pdf 11.38 KiB August 11 2016 / July 05 2017
various Internal Photos Internal Photos pdf 4.63 MiB February 07 2020 / August 10 2020 delayed release
various Internal Photos 1 of 3 Internal Photos pdf 5.58 MiB
various Internal Photos 2 of 3 Internal Photos pdf 5.66 MiB
various Internal Photos 3 of 3 Internal Photos pdf 3.03 MiB
various Internal photo Internal Photos pdf 1.96 MiB January 09 2017 / January 03 2018
various External Photos External Photos pdf 1.08 MiB February 07 2020 / August 10 2020 delayed release
various External photo External Photos pdf 491.17 KiB January 09 2017 / January 03 2018
various external-photo External Photos pdf 1.86 MiB
various ID Label/Location Info ID Label/Location Info pdf 240.17 KiB December 10 2018
various Label Location ID Label/Location Info pdf 91.08 KiB September 12 2019 / October 12 2019
various Label Sample ID Label/Location Info pdf 131.30 KiB September 12 2019 / October 12 2019
various Class II Permissive Change Letter Cover Letter(s) pdf 232.69 KiB February 07 2020 / February 12 2020
various Confidential Request Letter Cover Letter(s) pdf 15.53 KiB February 07 2020 / February 12 2020
various Power of Attorney Letter Cover Letter(s) pdf 239.44 KiB February 07 2020 / February 12 2020
various RF Exposure RF Exposure Info pdf 973.81 KiB February 07 2020 / February 12 2020
various RF Exposure Appendix A RF Exposure Info pdf 452.74 KiB February 07 2020 / February 12 2020
various RF Exposure Appendix B RF Exposure Info pdf 422.35 KiB February 07 2020 / February 12 2020
various RF Exposure Appendix C RF Exposure Info pdf 2.58 MiB February 07 2020 / February 12 2020
various Test Setup Photos Test Setup Photos pdf 75.79 KiB February 07 2020 / August 10 2020 delayed release
various Class II Permissive Change Cover Letter(s) pdf 17.95 KiB September 12 2019 / October 12 2019
various Confidentiality Request Letter Cover Letter(s) pdf 22.84 KiB September 12 2019 / October 12 2019
various Test Setup Photos pdf
various CIIPC Request Cover Letter(s) pdf 338.52 KiB
various Confidentiality Request Cover Letter(s) pdf 327.46 KiB
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various Confidentiality Cover Letter(s) pdf 9.94 KiB December 10 2018
various Declaration of authorization Cover Letter(s) pdf 309.45 KiB December 10 2018
various RF Exposure Info pdf December 10 2018
various Test Setup Photos pdf December 10 2018 / November 04 2019
various Letter of Declaration DFS Cover Letter(s) pdf 218.61 KiB December 10 2018
various Confidentiality Letter Cover Letter(s) pdf 30.82 KiB
various Test Setup Photos pdf November 09 2017 / November 03 2018
various CIIPC Letter Cover Letter(s) pdf 24.96 KiB July 09 2017 / August 09 2017
various RF Exposure Info pdf July 09 2017 / August 09 2017
various Class II permissive change letter for FCC Cover Letter(s) pdf 22.25 KiB January 09 2017 / June 09 2017
various Letter of Declaration Cover Letter(s) pdf 18.75 KiB January 09 2017 / June 09 2017
various Test Setup Photos pdf January 09 2017 / January 03 2018
various Class II permissive change letterClass II permissive change letter for FCC Cover Letter(s) pdf 8.67 KiB
various FCC CIIPC Letter Cover Letter(s) pdf 25.95 KiB November 07 2017
various Declaration Class II permissive change letter for FCC Cover Letter(s) pdf 66.46 KiB December 12 2016
various Declaration EMC RF Justification letter Cover Letter(s) pdf 19.01 KiB December 12 2016
various Test Setup Photos pdf December 12 2016 / November 06 2017
various RF Exposure Info pdf August 11 2016 / October 11 2016
various Module Approval Request Cover Letter(s) pdf 635.79 KiB August 11 2016 / October 11 2016
various Test Report pdf August 11 2016 / October 11 2016
various Test Report pdf August 11 2016 / October 11 2016
various Test Report pdf August 11 2016 / October 11 2016
various Test Setup Photos pdf August 11 2016 / July 05 2017
various Test Setup Photos pdf August 11 2016 / July 05 2017
various UNII declaration letter Cover Letter(s) pdf 397.52 KiB August 11 2016 / October 11 2016
various RF Exposure Info pdf August 11 2016 / October 11 2016
various RF Exposure Info pdf August 11 2016 / October 11 2016
various Test Report pdf August 11 2016 / October 11 2016
various Test Report pdf August 11 2016 / October 11 2016
various Test Setup Photos pdf August 11 2016 / July 05 2017
various Test Setup Photos pdf August 11 2016 / July 05 2017
various WIFI ch 12 -13 Declaration letter Cover Letter(s) pdf 16.40 KiB August 11 2016 / October 11 2016
various Test Report pdf August 11 2016 / October 11 2016
various Host User Manual Users Manual pdf 601.63 KiB
various User Manual Users Manual pdf 601.16 KiB
various Users Manual Users Manual pdf 285.95 KiB December 10 2018 / November 04 2019
various Users Manual-Statement Users Manual pdf 11.38 KiB August 11 2016 / July 05 2017
various Internal Photos Internal Photos pdf 4.63 MiB February 07 2020 / August 10 2020 delayed release
various Internal Photos 1 of 3 Internal Photos pdf 5.58 MiB
various Internal Photos 2 of 3 Internal Photos pdf 5.66 MiB
various Internal Photos 3 of 3 Internal Photos pdf 3.03 MiB
various Internal photo Internal Photos pdf 1.96 MiB January 09 2017 / January 03 2018
various External Photos External Photos pdf 1.08 MiB February 07 2020 / August 10 2020 delayed release
various External photo External Photos pdf 491.17 KiB January 09 2017 / January 03 2018
various external-photo External Photos pdf 1.86 MiB
various ID Label/Location Info ID Label/Location Info pdf 240.17 KiB December 10 2018
various Label Location ID Label/Location Info pdf 91.08 KiB September 12 2019 / October 12 2019
various Label Sample ID Label/Location Info pdf 131.30 KiB September 12 2019 / October 12 2019
various Class II Permissive Change Letter Cover Letter(s) pdf 232.69 KiB February 07 2020 / February 12 2020
various Confidential Request Letter Cover Letter(s) pdf 15.53 KiB February 07 2020 / February 12 2020
various Power of Attorney Letter Cover Letter(s) pdf 239.44 KiB February 07 2020 / February 12 2020
various RF Exposure RF Exposure Info pdf 973.81 KiB February 07 2020 / February 12 2020
various RF Exposure Appendix A RF Exposure Info pdf 452.74 KiB February 07 2020 / February 12 2020
various RF Exposure Appendix B RF Exposure Info pdf 422.35 KiB February 07 2020 / February 12 2020
various RF Exposure Appendix C RF Exposure Info pdf 2.58 MiB February 07 2020 / February 12 2020
various Test Setup Photos Test Setup Photos pdf 75.79 KiB February 07 2020 / August 10 2020 delayed release
various Class II Permissive Change Cover Letter(s) pdf 17.95 KiB September 12 2019 / October 12 2019
various Confidentiality Request Letter Cover Letter(s) pdf 22.84 KiB September 12 2019 / October 12 2019
various CIIPC Request Cover Letter(s) pdf 338.52 KiB
various Confidentiality Request Cover Letter(s) pdf 327.46 KiB
various Confidentiality Cover Letter(s) pdf 9.94 KiB December 10 2018
various Declaration of authorization Cover Letter(s) pdf 309.45 KiB December 10 2018
various Letter of Declaration DFS Cover Letter(s) pdf 218.61 KiB December 10 2018
various Confidentiality Letter Cover Letter(s) pdf 30.82 KiB
various CIIPC Letter Cover Letter(s) pdf 24.96 KiB July 09 2017 / August 09 2017
various Class II permissive change letter for FCC Cover Letter(s) pdf 22.25 KiB January 09 2017 / June 09 2017
various Letter of Declaration Cover Letter(s) pdf 18.75 KiB January 09 2017 / June 09 2017
various FCC CIIPC Letter Cover Letter(s) pdf 25.95 KiB November 07 2017
various Declaration Class II permissive change letter for FCC Cover Letter(s) pdf 66.46 KiB December 12 2016
various Declaration EMC RF Justification letter Cover Letter(s) pdf 19.01 KiB December 12 2016
various Module Approval Request Cover Letter(s) pdf 635.79 KiB August 11 2016 / October 11 2016
various UNII declaration letter Cover Letter(s) pdf 397.52 KiB August 11 2016 / October 11 2016
various WIFI ch 12 -13 Declaration letter Cover Letter(s) pdf 16.40 KiB August 11 2016 / October 11 2016

frequency equipment class purpose
1 2020-02-12 2412 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
2 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
3 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 2019-12-10 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
5 5500 ~ 5700 NII - Unlicensed National Information Infrastructure TX
6 2412 ~ 2462 DTS - Digital Transmission System
7 2019-01-22 2402 ~ 2480 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
8 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
10 2018-10-15 2412 ~ 2462 DTS - Digital Transmission System
11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
12 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
13 2018-06-21 5500 ~ 5700 NII - Unlicensed National Information Infrastructure TX
14 2412 ~ 2462 DTS - Digital Transmission System
15 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
16 2017-09-13 5500 ~ 5700 NII - Unlicensed National Information Infrastructure TX
17 2412 ~ 2462 DTS - Digital Transmission System
18 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
19 2017-09-08 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
20 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
21 2412 ~ 2462 DTS - Digital Transmission System
22 2017-09-06 5500 ~ 5700 NII - Unlicensed National Information Infrastructure TX
23 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
24 2412 ~ 2462 DTS - Digital Transmission System
25 2017-09-01 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
26 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
27 2412 ~ 2462 DTS - Digital Transmission System
28 2017-08-29 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
29 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
30 2412 ~ 2462 DTS - Digital Transmission System
31 2017-08-24 5500 ~ 5700 NII - Unlicensed National Information Infrastructure TX
32 2412 ~ 2462 DTS - Digital Transmission System
33 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
34 2017-07-14 2412 ~ 2462 DTS - Digital Transmission System
35 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
36 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
37 2016-12-19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
38 2412 ~ 2462 DTS - Digital Transmission System
39 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
40 2016-11-10 5500 ~ 5700 NII - Unlicensed National Information Infrastructure TX Original Equipment
41 2412 ~ 2462 DTS - Digital Transmission System
42 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
various Effective 2020-02-12
various 2019-12-10
various 2019-01-22
various 2018-10-15
various 2018-06-21
various 2017-09-13
various 2017-09-08
various 2017-09-06
various 2017-09-01
various 2017-08-29
various 2017-08-24
various 2017-07-14
various 2016-12-19
various 2016-11-10
various Applicant's complete, legal business name FLYTECH TECHNOLOGY CO., LTD
various FCC Registration Number (FRN) 0018869826
various Physical Address No. 168, Sing-ai Rd., Neihu District, Taipei City
various Taipei City
various Taiwan
app s TCB Information
various TCB Application Email Address t******@timcoengr.com
various T******@TIMCOENGR.COM
various c******@telefication.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
various Grantee Code XHM
various Equipment Product Code PB63D31
app s Person at the applicant's address to receive grant or for contact
various Name A**** Z******
various Telephone Number 886-2******** Extension:
various Fax Number 886-2********
various E-mail a******@flytech.com.tw
app s Technical Contact
various Firm Name SGS Taiwan Ltd.
various Name J******** C********
various W****** C********
various Physical Address 134, Wu Kung Road, Wuku Industrial Zone
various 134, Wu Kung Rd., Wuku Industrial Zone
various 134, Wu Kung Rd.
various Taiwan
various Telephone Number 88622******** Extension:
various 88622********
various 88622******** Extension:
various 886-2********
various Fax Number 88622********
various 886-2********
various 86222********
various E-mail j******@sgs.com
various w******@sgs.com
various W******@sgs.com
app s Non Technical Contact
various Firm Name SGS Taiwan Ltd.
various Name J**** C********
various W****** C********
various Physical Address 134, Wu Kung Road, Wuku Industrial Zone
various 134, Wu Kung Rd., Wuku Industrial Zone
various 134, Wu Kung Rd.
various Taiwan
various Telephone Number 88622******** Extension:
various 88622********
various 88622******** Extension:
various 886-2********
various Fax Number 88622********
various 886-2********
various 86222********
various E-mail j******@sgs.com
various w******@sgs.com
various W******@sgs.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)08/10/2020
various06/07/2020
various07/21/2019
various04/11/2019
various12/18/2018
various03/11/2018
various03/07/2018
various03/01/2018
various02/26/2018
various02/22/2018
various02/15/2018
various01/08/2018
various06/11/2017
various05/07/2017
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDTS - Digital Transmission System
variousNII - Unlicensed National Information Infrastructure TX
variousDSS - Part 15 Spread Spectrum Transmitter
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)52F185V10000
various52F185V1000
variousRugged Tablet
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeDoes not apply
variousLimited Single Modular Approval
variousSingle Modular Approval
variousPurpose / Application is forClass II Permissive Change
variousClass II permissive change or modification of presently authorized equipment
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?Yes
variousNo
variousGrant CommentsClass II Change: Limited Modular Approval. This Class II Change incorporates this Module into the tablet platform (Brand: FLYTECH, Model number: P274CT7). The change filed under this application is Adding an accessory back cover to the mobile PC. The accessory back cover integrated with a wireless module (FCC ID: JQ6-OK5127CKMINI). The Bluetooth function of this module is disabled via software in this application. Any configuration other than the one described in this application will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR is 0.73 W/kg. The device supports 20 / 40 MHz operating modes.
variousClass II Change: Limited Modular Approval. This Class II Change incorporates this Module into the tablet platform (Brand: FLYTECH, Model number: P274CT7). The change filed under this application is Adding an accessory back cover to the mobile PC. The accessory back cover integrated with a wireless module (FCC ID: JQ6-OK5127CKMINI). The Bluetooth function of this module is disabled via software in this application. Any configuration other than the one described in this application will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR is 1.04 W/kg. The device supports 20 / 40 / 80 MHz operating modes.
variousClass II Change: Limited Modular Approval. This Class II Change incorporates this Module into the tablet platform (Brand: FLYTECH, Model number: P274CT7). The change filed under this application is Adding an accessory back cover to the mobile PC. The accessory back cover integrated with a wireless module (FCC ID: JQ6-OK5127CKMINI). The Bluetooth function of this module is disabled via software in this application. Any configuration other than the one described in this application will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.
variousClass II Change: Limited Modular Approval. This Class II Change incorporates this Module into the mobile PC (Brand: FLYTECH, Model number: M284). Any configuration other than the one described in this application will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.
variousClass II Change: Limited Modular Approval. This Class II Change incorporates this Module into the mobile PC (Brand: FLYTECH, Model number: M284). Any configuration other than the one described in this application will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR is 0.93 W/kg. The device supports 20 / 40 / 80 MHz operating modes.
variousClass II Change: Limited Modular Approval. This Class II Change incorporates this Module into the mobile PC (Brand: FLYTECH, Model number: M284). Any configuration other than the one described in this application will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR is 1.14 W/kg. The device supports 20 / 40 MHz operating modes.
variousClass II Change: Limited Modular Approval. This Class II Change incorporates this Module into the mobile PC (Brand: FLYTECH, Model number: P274CT5). Any configuration other than the one described in this application will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR is 0.51 W/kg. The device supports 20 / 40 MHz operating modes.
variousClass II Change: Limited Modular Approval. This Class II Change incorporates this Module into the mobile PC (Brand: FLYTECH, Model number: P274CT5). Any configuration other than the one described in this application will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.
variousClass II Change: Limited Modular Approval. This Class II Change incorporates this Module into the mobile PC (Brand: FLYTECH, Model number: P274CT5). Any configuration other than the one described in this application will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR is 0.49 W/kg. The device supports 20 / 40 / 80 MHz operating modes.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform(Brand : Aures Technologies, Model number :Swing Cherry Trial). Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for standalone and simultaneous transmission use conditions are 1.10 W/kg, and 1.42 W/kg, respectively. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports both 20 / 40 / 80 MHz Bandwidth modes.
variousClass II Change: This Class II Change incorporates this Module into the tablet platform (Brand : Aures Technologies, Model number :Swing Cherry Trial). Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR value for simultaneous transmission use condition is 1.42 W/kg. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform(Brand : Aures Technologies, Model number :Swing Cherry Trial). Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for standalone and simultaneous transmission use conditions are 1.40 W/kg, and 1.42 W/kg, respectively. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports 20 / 40 / 80 MHz Bandwidth modes.
variousClass II Change: Limited Modular Approval. This Class II Change incorporates this Module into the tablet platform (Brand: FLYTECH, Model number: P274CT7). Any configuration other than the one described in this application will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR is 0.49 W/kg. The device supports 20 / 40 / 80 MHz operating modes.
variousClass II Change: Limited Modular Approval. This Class II Change incorporates this Module into the tablet platform (Brand: FLYTECH, Model number: P274CT7). Any configuration other than the one described in this application will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR is 0.79 W/kg. The device supports 20 / 40 MHz operating modes.
variousClass II Change: Limited Modular Approval. This Class II Change incorporates this Module into the tablet platform (Brand: FLYTECH, Model number: P274CT7). Any configuration other than the one described in this application will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform(Brand : FLYTECH, Model number :P265(D31L)). Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for standalone and simultaneous transmission use conditions are 0.26 W/kg, and 1.23 W/kg, respectively. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports 20 / 40 / 80 MHz Bandwidth modes.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform(Brand : FLYTECH, Model number :P265(D31L)). Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for standalone and simultaneous transmission use conditions are 0.11 W/kg, and 1.38 W/kg, respectively. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports both 20 / 40 / 80 MHz Bandwidth modes.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform(Brand : FLYTECH, Model number :P265(D31L)). Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR value for simultaneous transmission use condition is 1.38 W/kg. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform(Brand : FLYTECH, Model number :P265(D41)). Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR value for simultaneous transmission use condition is 0.65 W/kg. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform(Brand : FLYTECH, Model number :P265(D41)). Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for standalone and simultaneous transmission use conditions are 0.38 W/kg, and 0.53 W/kg, respectively. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports 20 / 40 / 80 MHz Bandwidth modes.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform(Brand : FLYTECH, Model number :P265(D41)). Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for standalone and simultaneous transmission use conditions are 0.50 W/kg, and 0.65 W/kg, respectively. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports both 20 / 40 / 80 MHz Bandwidth modes.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform(Brand : FLYTECH, Model number :P263(D31L)). Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for standalone and simultaneous transmission use conditions are 0.68 W/kg, and 1.23 W/kg, respectively. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports 20 / 40 / 80 MHz Bandwidth modes.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform(Brand : FLYTECH, Model number :P263(D31L)). Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR value for simultaneous transmission use condition is 1.42 W/kg. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform(Brand : FLYTECH, Model number :P263(D31L)). Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for standalone and simultaneous transmission use conditions are 1.14 W/kg, and 1.42 W/kg, respectively. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports both 20 / 40 / 80 MHz Bandwidth modes.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform(Brand : FLYTECH, Model number :P263(D41)). Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for standalone and simultaneous transmission use conditions are 0.68 W/kg, and 1.08 W/kg, respectively. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports 20 / 40 / 80 MHz Bandwidth modes.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform(Brand : FLYTECH, Model number :P263(D41)). Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR value for simultaneous transmission use condition is 1.44 W/kg. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform(Brand : FLYTECH, Model number :P263(D41)). Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for standalone and simultaneous transmission use conditions are 1.04 W/kg, and 1.44 W/kg, respectively. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports both 20 / 40 / 80 MHz Bandwidth modes.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform as described in this filing. Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. the highest SAR to BT is < 0.12W/kg (standalone), and 1.08 W/kg (simultaneously). Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform as described in this filing. Any configuration otherthan the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. the highest SAR to 5GHz is 0.31W/kg (standalone), and 0.69 W/kg (simultaneously) Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports 20 / 40 / 80 MHz Bandwidth modes.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform as described in this filing. Any configuration otherthan the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. the highest SAR to 2.4GHz is 1.07W/kg (standalone), and 1.08 W/kg (simulteneously) Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports both 20 / 40 MHz Bandwidth modes.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform as described in this filing. Any configuration otherthan the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. the highest SAR to 5GHz is 0.5W/kg (standalone), and 1.13 W/kg (simultaneously). Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports 20 / 40 / 80 MHz Bandwidth modes.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform as described in this filing. Any configuration otherthan the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. the highest SAR to 2.4GHz is 0.85W/kg (standalone), and 1.48 W/kg (simulteneously). Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports both 20 / 40 / 80 MHz Bandwidth modes.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform as described in this filing. Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest SAR to BT is 0.10W/kg (standalone). Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform as described in this filing. Any configuration otherthan the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body, and simultaneous transmission use conditions are 1.15 W/kg, and 1.30 W/kg, respectively. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports both 20 / 40 MHz Bandwidth modes.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform as described in this filing. Any configuration other than the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for simultaneous transmission use condition is 1.30 W/kg. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform as described in this filing. Any configuration otherthan the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body, and simultaneous transmission use conditions are 0.52 W/kg, and 0.67 W/kg, respectively. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports 20 / 40 / 80 MHz Bandwidth modes.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform as described in this filing. Any configuration otherthan the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body, and simultaneous transmission use conditions are: < 0.1 W/kg, 1.50 W/kg. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform as described in this filing. Any configuration otherthan the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body, and simultaneous transmission use conditions are: 0.85 W/kg, 1.50 W/kg. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
variousClass II Change: This Class II Change incorporates this Module into the tablet plateform as described in this filing. Any configuration otherthan the one described will require a separate approval. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body, and simultaneous transmission use conditions are: 0.35 W/kg, 1.05 W/kg. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports 20 / 40 / 80 MHz Bandwidth modes.
variousModular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports 20 / 40 / 80 MHz Bandwidth modes.
variousModular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports both 20 / 40 MHz Bandwidth modes.
variousModular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name Sporton International Inc.
various SGS Taiwan Ltd. Electronics & Communication Lab
various SPORTON International Inc.
various SGS TAIWAN LTD.
various SGS Taiwan Ltd.
various Name A******** C********
various R**** W******
various N**** B******
various R**** W******
various Telephone Number 88633********
various +886-******** Extension:
various 886-3******** Extension:
various 886-2******** Extension:
various +886-******** Extension:
various Fax Number +886-********
various +886-********
various 886-3********
various 886-2********
various +886-********
various E-mail a******@sporton.com.tw
various r******@sgs.com
various n******@sgs.com
various R******@sgs.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402 2480 0.006
1 2 15C CC 2412 2462 0.32
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E CC 5180 5240 0.02
2 2 15E CC 5260 5320 0.02
2 3 15E CC 5500 5700 0.02
2 4 15E CC 5745 5825 0.02
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402.00000000 2480.00000000 0.0080000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0080000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC 5180 5240 0.02
5 2 15E CC 5260 5320 0.02
5 3 15E CC 5500 5700 0.02
5 4 15E CC 5475 5825 0.02
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402 2480 0.006
6 2 15C CC 2412 2462 0.32
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.006
7 2 15C CC 2412 2462 0.32
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0080000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E CC 5180 5240 0.02
9 2 15E CC 5260 5320 0.02
9 3 15E CC 5500 5700 0.02
9 4 15E CC 5745 5825 0.02
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402 2480 0.006
10 2 15C CC MO 2412 2462 0.32
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402.00000000 2480.00000000 0.0080000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15E 38 CC MO 5180 5240 0.02
12 2 15E 38 CC MO ND 5260 5320 0.02
12 3 15E 38 CC MO ND 5500 5700 0.02
12 4 15E 38 CC MO 5745 5825 0.02
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15E CC 5180 5240 0.02
13 2 15E CC 5260 5320 0.02
13 3 15E CC 5500 5700 0.02
13 4 15E CC 5475 5825 0.02
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402 2480 0.006
14 2 15C CC 2412 2462 0.32
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402.00000000 2480.00000000 0.0080000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15E 38 CC 5180 5240 0.02
16 2 15E 38 CC ND 5260 5320 0.02
16 3 15E 38 CC ND 5500 5700 0.02
16 4 15E 38 CC 5475 5825 0.02
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402 2480 0.006
17 2 15C CC 2412 2462 0.32
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2402.00000000 2480.00000000 0.0080000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2402.00000000 2480.00000000 0.0080000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15E 38 CC 5180 5240 0.02
20 2 15E 38 CC ND 5260 5320 0.02
20 3 15E 38 CC ND 5500 5700 0.02
20 4 15E 38 CC 5745 5825 0.02
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402 2480 0.006
21 2 15C CC 2412 2462 0.32
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15E 38 CC 5180 5240 0.02
22 2 15E 38 CC ND 5260 5320 0.02
22 3 15E 38 CC ND 5500 5700 0.02
22 4 15E 38 CC 5475 5825 0.02
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15C CC 2402.00000000 2480.00000000 0.0080000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402 2480 0.006
24 2 15C CC 2412 2462 0.32
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15E 38 CC 5180 5240 0.02
25 2 15E 38 CC ND 5260 5320 0.02
25 3 15E 38 CC ND 5500 5700 0.02
25 4 15E 38 CC 5745 5825 0.02
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15C CC 2402.00000000 2480.00000000 0.0080000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2402 2480 0.006
27 2 15C CC 2412 2462 0.32
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15C CC 2402.00000000 2480.00000000 0.0080000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15E 38 CC 5180 5240 0.02
29 2 15E 38 CC ND 5260 5320 0.02
29 3 15E 38 CC ND 5500 5700 0.02
29 4 15E 38 CC 5745 5825 0.02
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15C CC 2402 2480 0.006
30 2 15C CC 2412 2462 0.32
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15E 38 CC 5180 5240 0.02
31 2 15E 38 CC ND 5260 5320 0.02
31 3 15E 38 CC ND 5500 5700 0.02
31 4 15E 38 CC 5475 5825 0.02
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15C CC 2402 2480 0.006
32 2 15C CC 2412 2462 0.32
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15C CC 2402.00000000 2480.00000000 0.0080000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15C CC 2402 2480 0.006
34 2 15C CC 2412 2462 0.32
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC 2402.00000000 2480.00000000 0.0080000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15E CC 5180 5240 0.02
36 2 15E CC ND 5260 5320 0.02
36 3 15E CC ND 5500 5700 0.02
36 4 15E CC 5745 5825 0.02
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15C CC 2402.00000000 2480.00000000 0.0080000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15C CC 2402 2480 0.006
38 2 15C CC 2412 2462 0.32
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15E CC 5180 5240 0.02
39 2 15E CC ND 5260 5320 0.02
39 3 15E CC ND 5500 5700 0.02
39 4 15E CC 5745 5825 0.02
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15E CC 5180 5240 0.02
40 2 15E CC ND 5260 5320 0.02
40 3 15E CC ND 5500 5700 0.02
40 4 15E CC 5475 5825 0.02
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15C CC 2402 2480 0.006
41 2 15C CC 2412 2462 0.32
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
42 1 15C CC 2402.00000000 2480.00000000 0.0080000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC