all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
manual | Users Manual | 1.42 MiB | January 09 2009 / February 09 2009 | |||
1 | Cover Letter(s) | January 09 2009 / February 09 2009 | ||||||
1 | RF Exposure Info | January 09 2009 / February 09 2009 | ||||||
1 | Cover Letter(s) | January 09 2009 / February 09 2009 | ||||||
1 | External Photos | January 09 2009 / February 09 2009 | ||||||
1 | Internal Photos | January 09 2009 / February 09 2009 | ||||||
1 | ID Label/Location Info | January 09 2009 / February 09 2009 | ||||||
1 | Cover Letter(s) | January 09 2009 / February 09 2009 | ||||||
1 | Test Report | January 09 2009 / February 09 2009 | ||||||
1 | Test Report | January 09 2009 / February 09 2009 | ||||||
1 | Test Setup Photos | January 09 2009 / February 09 2009 |
1 | manual | Users Manual | 1.42 MiB | January 09 2009 / February 09 2009 |
User Manual Revision v1.0 July 2009 P234 Hardware System Flytech Technology co., Ltd. Copyright Copyright 2009 July All Rights Reserved Manual Version 1.0 P/N:
The information contained in this document is subject to change without notice. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language without the prior written consent of the manufacturer. TRADEMARK The material in this manual is subject to change without notice. Bluetooth is a registered trademark of Bluetooth SIG. Microsoft, Windows and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation. All other product or service names are the property of their respective owners. ii Revision History Changes to the original user manual are listed below:
Version Date Description 1.0 2009/07 Initial release iii Safety Regulatory Information:
Caution: Only use approved and UL Listed accessories, battery packs and battery chargers. Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source. Power Supply Use only the approved power supply 50-14000-148 output rated 5 Vdc and minimum 2 A. The power supply is certified to EN60950-1 with SELV outputs. Use of alternative power supply will invalidate any approval given to this device and may be dangerous. Warning for Use of Wireless Devices Please observe all warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine. Safety in Aircraft Switch off your wireless device whenever you are instructed to do so by airport or airline staff. Pacemakers Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. iv Persons with Pacemakers:
Persons with Pacemakers should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON and hence they should not carry the device in a breast pocket . Should use the ear furthest from the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn OFF your device. Hearing Aids The wireless device may interfere with some hearing aids. In the event of interference you may want to consult your hearing aid supplier to discuss solutions. Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. FCC / EU RF Exposure Guidelines Safety Information This device complies with internationally recognized standards covering Specific Absorption Rate (SAR) related to human exposure to electromagnetic fields from radio devices. Reducing RF Influence - Use Properly It is advisable to use the device only in the normal operating position. Handheld Devices This device was tested for typical body-worn operation. Use only tested and approved belt-holsters, hand strip and similar accessories to ensure FCC Compliance. The use of third-party v belt-clips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements, and should be avoided. To comply with FCC RF exposure requirements, this device must be operated in the hand with a minimum separation distance of 2.5 cm or more from a person's body. Other operating configurations should be avoided. Radio Frequency Interference Requirements - FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CE Marking and European Economic Area (EEA) The use of 2.4GHz RLAN's, for use through the EEA, have the following restrictions:
l Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835 GHz l France, outside usage is restricted to 2.4 - 2.454 GHz. l Italy requires a user license for outside usage. Bluetooth Wireless Technology for use through the EEA has the following restrictions:
l Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 -2.4835 GHz l France, outside usage is restricted to 10mW EIRP l Italy requires a user license for outside usage. vi Battery Information Our rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops. When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries discharged in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, they should be charged and discharged at least once a year. If an electrolyte leakage is observed, avoid any contact with affected area and properly dispose of the battery. Batteries must be charged within the 32 to 95 F (0 to +35 C) ambient temperature range. Replace the battery when a significant loss of run time is detected. Battery Caution Risk of explosion if battery is replaced by an incorrectly type. Dispose of used battery according to the local disposal instructions. Waste Electrical and Electronic Equipment (WEEE) English: For EU Customers: All products at the end of their life must be returned to the reseller for recycling. vii Notational Conventions The following conventions are used in this document:
u Italics are used to highlight specific items in the general text, and to identify chapters and sections in this and related documents. u bullets () indicate:
action items Sequential lists (e.g., those that describe step-by-step lists of alternatives lists of required steps that are not necessarily sequential procedures) appear as numbered lists. NOTE This symbol indicates something of special interest or importance to the reader. Failure to read the note will not result in physical harm to the reader, equipment or data. CAUTION This symbol indicates that if this information is ignored, the possibility of data or material damage may occur. WARNING! This symbol indicates that if this information is ignored the possibility that serious personal injury may occur. viii Table of Contents 1 Introduction ............................................1 System Overview......................................................................1 1-1 1-2 Standard Components..............................................................2 Optional Accessory...................................................................3 1-3 Hardware Description...............................................................4 1-4 1-5 System Feature Description .....................................................8 2-1 2-2 2-3 2 Getting Started .....................................11 Installing the Main Battery ...................................................... 11 Removing the Main Battery .................................................... 12 Installing / Uninstalling SD Card .............................................13 2-3-1 Installing the SD Card................................ ..................... 13 2-3-2 Uninstalling the SD Card ................................ ................ 13 2-4 Neck Strap Installation............................................................ 14 2-5 Wrist Strap Installation............................................................ 15 2-6 Hand Strap Installation............................................................ 16 Charging the Main Battery...................................................... 18 2-7 Backup Battery ....................................................................... 19 2-8 2-9 Power on/off the System.........................................................20 3 Using the System.................................21 3-1 Wi-Fi Connection Settings ...................................................... 21 3-1-1 Connecting to an Existing Network .................................. 21 3-1-2 Adding a New Network................................ ................... 23 3-1-3 Enhancing the WiFi Connection ................................ ..... 24 3-1-4 SSID Lock Function......................................................... 25 Connecting to a Bluetooth Device .......................................... 26 3-2-1 Turning on the Bluetooth Connection .............................. 26 3-2-2 Scanning Bluetooth Devices............................................ 27 3-2-3 Connecting to a Bluetooth Printer................................ ... 28 3-2-4 To Synchronize with a PC via Bluetooth.......................... 30 3-2-5 Bluetooth File Transfer (FTP) .......................................... 36 3-2 ix 3-3 3-4 3-5 3-6 3-7 Backup and Restoring the System .........................................38 3-3-1 BBackup the System ......................................................... 38 3-3-2 Restoring the System ................................ ..................... 39 Switching the Admin / User mode...........................................40 Power Management Settings.................................................. 41 3-5-1 CPU Power Mode Settings.............................................. 41 3-5-2 System Configuring Power Mode Settings....................... 42 3-5-3 Display Backlight Settings ................................ .............. 43 3-5-4 WiFi Power Mode Settings .............................................. 44 LED Indicator Description....................................................... 45 Resetting the Mobile System .................................................. 46 3-7-1 Reset to the Factory Default Settings .............................. 46 3-7-2 Cold Boot ................................ ............................... ....... 47 4 Application Programming Interface ...48 4-1 Windows Embedded CE 5.0 Standard.................................... 48 Non WindowsCE Standard.....................................................52 4-2 4-2-1 Admin/User Mode Application.......................................... 52 4-2-2 Overwrite Factory Default................................................ 54 4-2-3 Programmable button feature .......................................... 62 4-2-4 Vibration notification feature ............................................ 69 5-1 5 Optional Accessory Installation .........71 USB Cable.............................................................................. 71 5-1-1 Synchronization via USB Cable....................................... 72 5-1-2 Installing the USB Cable.................................................. 73 5-1-3 Start the Synchronization................................ ................ 74 5-1-4 Enable the Synchronization Manually.............................. 75 5-2 MSR Module Installation.........................................................77 5-3 2-in-1 MSR and Scanner Module Installation .........................80 x 4 5 1 Introduction 1-1 System Overview This chapter lists the parts, accessories, hardware System Overview table -1 Location Description 1 2 3 LED Indicator Show the Status of Wi-Fi connection and battery. Power & 4 Programmable Keys Hold 5 seconds to power on/off the system. Speaker At rear side 4 Hand Strap Screw Hole Mounted for hand strap 5 Reset Hole 6 7 Battery locker Strap Holes 8 Charging Slot For system reset to the default setting Secure the Main Battery door Mount for neck strap and wrist strap. Charger Slot for recharging the battery. 1 1-2 Standard Components 4 6 7 5 8 1 2 3 Items 1 Mobile System Travel Charger
(Note: Only for power charge use, not for data transfer use) 2 3 Main Battery 4 5 6 Holster Power Adapter (AC-USB connector) Hand Strap 7 Wrist Strap 8 Neck Strap 2 1-3 Optional Accessory 1 2 3 4 5 6 1 2 3 Items Standard Battery Charger Power Brick of Standard Battery Charger Power Cord of Standard Battery Charger Note: Power cord are various according to the shipping country. 4 MSR Module 5 6 2-in-1 MSR & Scanner Module USB Cable for synchronization & programming 3 1-4 Hardware Description Descriptions l Marvell PXA270 416MHz (Xscale Core) l l 128Mbytes SDRAM Around 115MB use for system operation, otherwise for storing system loader and system data 1Gbytes Flash (ROM file system) l l More than 300MB for storing WindowCE image and l l OEM application programs Around 600MB leaved for system and user storage, emulated as folders in all system directories Around 100MB leaved for storing OEM data and configurations This device provides a specific mechanism to let system integrator easily to integrate the OEM applications and device configurations into device as factory default mode without merging OEM applications into WindowCE image It can help system integrator doesnt have to maintain the device after end user crashed the device by reset device to factory default mode or on-line updated the OS image from internet PXA270 Display controller Share System Memory as Video Frame Buffer l l l Resolution : 272x480 pixels, 16 bit color l l 4 way rotator for direction detection 43 inches TFT LCD WQVGA (480x272 pixels resolution) Transmissive display mode l l Digital RGB 8bit color depth , 10 LEDs backlight Item 1 2 Features Main Processor System Memory 3 System Storage 4 Display 5 LCD 4 Item Features Descriptions 6 7 8 9 Touch Panel Audio Secure Digital Socket WiFi IEEE 80211b/g 10 Bluetooth 11 USB Client 12 USB Host 13 FFUART port LCD panel with touch panel design l l Resistor 80% Transparency (Film to Glass type) Stereo audio system with mono speaker design l l 05W speaker amplifier l Headphone stereo output (Optional) l SD memory card (Support up to: 2Gbytes) l Auto fallback mode : 6M~54M(80211g), 1M~11M(80211b) l Complying with Wireless Ethernet Compatibility Alliance Support hardware signaling BT WiFi co-existence Link LED indicator l l l Output Power :
802.11b: +18 dBm (peak) / 16 dBm (e.i.r.p.) 802.11g: +21 dBm (peak) / 16 dBm (e.i.r.p.) l Compliant with Bluetooth Specification V2.0+EDR l Output Power : -1dBm (peak) / 1dBm (e.i.r.p.)
(Class 2) l Receive Sensitivity : Typical -78dBm l USB Specification - 11 compliant l Full-Speed operation on half-duplex at 12Mbps baud rate l Compliant with USB Specification 11 and OHCI l l l Spec Support both low-speed and full-speed USB devices Expansion slot for optional device (either one of the MSR reader, IC card reader, Barcode scanner, and so on) Expansion slot for optional device (either one of the MSR reader, IC card reader, Barcode scanner, and so on) l Maximum baud rate 921600bps l Full function UART 5 14 Buttons l Keypad 4 programmable buttons 6 Item 15 Features Power / Reset buttons Descriptions l Power Button : Suspend/ Resume Device and Enter Key l Reset Button : Warm Reset l Press Power and Reset buttons simultaneously:
Cold Reset 16 LED indicators l Green: ON device power on , OFF device off /
17 18 Vibrator Smart Battery suspend Blue: Link Status of WiFi manager Vibrational indicator 37V Li-lon battery pack : 2200mA/h l l Red: Flash Battery low, ON Charging battery l l l Charging time : maximum 35 ~ 4Hours l l Thermal / Over Charging Protections Auto mode of Low / High speed charging mechanism 19 20 Travel Charger Adapter l Mini-USB type connector l AC110V ~ 240V / DC5V ( 10W ) 50~60Hz 7 1-5 System Feature Description Item 1 Features Application Descriptions Internet Explorer 6.0 for Windows CE l File Explorer l l Windows Media Player l Windows CE standard shell (Windows XP-like skin) File System 2 3 Graphic / Display l l ROM File system with hive registry 480x272x16 (Landscape mode) as panel default mode 272x480x16
(Portrait mode) as system default mode 4 User Input Interface 5 Audio l Compliant with Graphics, Windowing and Event Subsystems of Window CE embedded. l Still Image Codec Support l DirectShow l Support screen rotation feature l Stylus input rather than mouse input capability l USB Keyboard / Mouse (optional) USB Host Interface l Buttons: 4 programmable keys
(without system wakeup feature) l Audio playback feature only l Support waveform audio Input/Output device APIs l Configurable sound enable/disable feature of system event, message notification, screen taps. l MP3 Codec l MPEG-1 Layer 1 and 2 audio codec l Waveform audio renderer l WMA Codec 8 Item 6 Features Storage 7 Data Communication WLAN 8 Data Communication Bluetooth 9 Data Synchronization 10 Vibration Notification 11 System Power State 12 Backlight Descriptions l Removable storage : SD memory (up to 2GB) : USB storage (optional) l Persistent storage: NAND flash memory (On Board) l Support seamless roaming in IEEE802.11b/g WLAN authentication infrastructure l Support single SSID l Support fast Wi-Fi roaming l Support always on Wi-Fi l WPA and 802.11i security standard
(AES/CCMP and WEP with TKIP security mechanism) l Support Window Wireless Zero Configuration service l Compliant Bluetooth software specification l Window CE Bluetooth communication l software stack SPP FTP Activesync profile supports l Support Winsock Bluetooth programming interface l Bluetooth Window CE Active-sync l USB SD card reader l Support Programming API of Window CE device manager l Support Remote Application Interface
(RAPI) for retrieves the power state of system
: Battery Status / AC status l Support Programming API of Window CE device manager l Support 10 backlight scales 9 Item 13 Features Descriptions Network Features l NDIS network driver architecture l TCP/IP l Windows Networking API /Redirector
[SMB]
l WinSock Support 14 Security l Authentication Services (SSPI) 15 Applications and Service Development 16 Fonts 17 Multilingual 18 OEM l Credential Manager l CrytoAPI 1.0
.NET compact framework 2.0 l l Active Template Library (ATL) l C Libraries and Runtimes l COM and DCOM l Microsoft Foundation Classes (MFC) l Object Exahange Protocol l Standard SDK for Windows CE l MSXML 3.0 l Courier New (Subset 1_30) l Tahoma (Subset 1_07) l Wingding l English (English software Input Panel) l Traditional Chinese l
(Bopomofo/ Chan Jei software Input Panel, Handwriting) l Simplified Chinese (Shuang Pin software Input Panel) l Factory Device Manager l User mode / Admin mode operation modes 10 2 Getting Started 2-1 Installing the Main Battery Battery Bay Battery Door Main Battery 1. Rotate the lock screw counter-clockwise with a flat-head screw driver or a coin to release the lock. 2. Slide the battery door outwards as direction of the arrow and open the battery door. 3. Push down the main battery into the battery bay until you hear a clip sound. 4. Put back the battery door and fasten the lock screw in clockwise way. 11 2-2 Removing the Main Battery 1. Open the battery door described in Chapter 2-1 first. 2. Please use your finger nail to pull the fillister on the battery latch (the circle marked) toward the front as the direction of the arrow shows. 3. Flip up and remove the battery to replace another. 12 2-3 2-3-1 Installing / Uninstalling SD Card SD Card Slot locates in the inner side of the battery bay which is a push-push type. Installing the SD Card 1. To open the battery door and remove the main battery first as described in Chapter 2-1 and 2-2. 2. To push the SD card into the Slot until it clicks. 3. To remove the SD Card, please push again the SD card and slide outwards. 2-3-2 Uninstalling the SD Card 1. To remove the SD Card, please push again the SD card and slide outwards. 13 2-4 Neck Strap Installation To installing the Neck Strap, please unthread the Neck Strap first then follow the below steps. 1. Start threading the Neck Strap through the Strap Hole as arrow direction. 2. Thread through the plastic ring to make it secured with the Neck strap. 3. Repeat a and b at the other side. 4. Finished. 14 2-5 Wrist Strap Installation 1. Start threading the Wrist Strap through the Strap Ring. 2. Thread through as the arrow direction point. 3. Finished. 15 2-6 Hand Strap Installation Hand strap screw holes 1. Start threading the Hand Strap through the strap hole at the either side of the system. 2. Thread through as the arrows direction show. 3. Finish the Hand Strap threading through the strap hole at the side of the system. 16 4. Fasten the Hand Strap Plastic Ring with the screws (2) to the screw holes at rear side of the system. 5. Thread the Hand Strap through the plastic ring as the direction of the arrows show. 6. Finished. 17 2-7 Charging the Main Battery 1. Connect the Mobile System, Travel Charger and USB-AC power Adaptor as above arrow instruction. 2. Plug the USB-AC Adapter to the electrical outlet. 3. The LED light turns Orange while recharging. 4. When recharging is complete, the LED light turns Green.
Note: Please make sure to align the juts (2) of the Travel Charger into the holes at the bottom of the Mobile system when connecting the 2 units. 18 2-8 Backup Battery The internal Backup Battery can last for 5 minutes. The screen will be powered on with the last status when you replaced the Main Battery within 5 minutes. When the Main Battery is out of system over 5 minutes, the boot-up screen will pop up as above figure shows after pressing the Power Button for 1 second.
Note: Normal procedure of system power-on is holding down the Power Button for 5 seconds. 19 2-9 Power on/off the System Power Button Turn on the System Press and hold the Power Button (as the arrow marked) for 5 seconds to turn on the system. Turn off the System To press the Power Button for 5 seconds or press Start Menu > Suspend to turn off the system. 20 3 Using the System 3-1 Wi-Fi Connection Settings 3-1-1 Connecting to an Existing Network Enable Wireless Connection 1. Enable the Wireless Connection by choosing as steps of Start >
Settings > Control Panel > Network and Dial-up Connections. 2. Right click on the GPS186861 and tap the Enable icon in the drop down menu to access the wireless connection. 3. After enable the GPSI86861, you will see the icon appears in the system tray. 21 Select a Network and get connection 4. You will see the GPSI86861 window pop up after you double click on the icon . 5. Press Main tab and Configure button. 6. Select the network you want and put the key (password) if needed, then press Connect button to get connection.
NOTE: You can create a new network by selecting Add New
(please see Chapter 3-1-2 ) 7. After WiFi is successfully connected, the screen will pop up a message showing the status of the connecting condition and the icon in he system tray will turn to icon . 22 3-1-2 Adding a New Network To add a new network connection, please enable the wireless connection first by following the steps in Chapter 3-1-1. 1. The Wireless Properties dialog box pop up after pressing Add New. 2. To put a network name you want in Network name (SSID) text box, select Encryption and Authentication and enter password in the Network key to access a new network point existing in you place. 3. Wireless successfully connected when Status showing Connected to xxx. 23 3-1-3 Enhancing the WiFi Connection If the status of WiFi Connection stays low, please follow the below steps:
1. Please double-click on the icon in the system tray. The GSP186861 dialog will appear. 2. Please select Advance tab and move the Power Management to the Best Performance level and the Roaming Feature to the far right. 3. Press OK to save the settings. 24 3-1-4 SSID Lock Function 1. Enable Wireless Connection by following the steps in Chapter 3-1-1. 2. After enable the Wireless Connection, the icon will appear i n the configure button on system tray. Double click the icon and press the GPSI86861 window. Windows Information window will appear. 3. Select a network you want and click the Lock to specific SSID check box. Click Connect button to lock the SSID. 4. SSID is locked successfully by showing Status as Connected to. on the Wireless Information window. 25 3-2 Connecting to a Bluetooth Device 3-2-1 Turning on the Bluetooth Connection 1. Enable the Bluetooth Connection by following the steps Start >
Settings > Control Panel > Bluetooth Device. 2. Select Config tab In the Bluetooth Manager dialog box. 3. Press Turn Bluetooth ON button to Turn Bluetooth Off to enable the Bluetooth connection. 26 3-2-2 Scanning Bluetooth Devices We can scan the devices in a area and active their services in a Bluetooth Manger dialog by selecting Start > Settings > Control Panel > Bluetooth Device. 1. To turn on the Bluetooth Connection. (Chapter 3-2-1) 2. Select Scan Device tab in the Bluetooth Manager dialog box. 3. Press Scan Device button to scan the surrounding Bluetooth devices. 4. Select a Bluetooth device you want listing in the Device menu and press Add Device button.
Note: Please refer to the Chapter 4-1-10 for Programming Interface of Bluetooth. 27 3-2-3 Connecting to a Bluetooth Printer Please perform the steps in the Chapter 3-2-1 to turn the Bluetooth on and the Chapter 3-2-2 to scan the surrounding Bluetooth device first. Paring a Bluetooth Printer Device In Bluetooth, you have the option to "pair" two devices. When you pair with a Bluetooth device, this device will be "remembered that means you need not search for the device again when you want to use the device next time. 1. Select a Bluetooth printer device you want on the Device list after tapping on the Scan Devices button. 2. Press Add Device button. A Bluetooth Manager dialog box will pop up. 3. Press Yes button to authenticate (pair) the mobile system and the printer device. 4. A PIN code is request when paring to a printer device. 5. Enter the pin code to complete the authentication. 28 Active Printer Service 1. Tapping on the Bluetooth Printer device you want and choose a service on the Service menu. The current example is selecting Printer service. 2. Press Active Service button to active the Printer service. A Serial Port Setting dialog box will appear. 3. Choose the COM port options in the drop down list you want. 4. Press OK. 29 3-2-4 To Synchronize with a PC via Bluetooth Before Synchronize the Mobile System with a PC, please turn on the Bluetooth connection as described in the Chapter 3-2-1 and pair the PC and the Mobile System first as detailed in the below. Pairing a Bluetooth enabled PC When you pair with a Bluetooth device, this device will be "remembered that means you need not search for the device again when you want to use the device next time. 1. To turn on the Bluetooth Connection first, see Chapter 3-2-1. 2. Select a Bluetooth enabled PC device you want in the Device list. 3. Press Add Device button. A Bluetooth Manager dialog box will pop up. 4. Press Yes button to authenticate the Mobile System and the PC. 30 5. A PIN Entry request will pop up on the 2 Bluetooth connecting devices for paring.
Note: Here is an example screen captured from the IVT Bluetooth dongle and the pertaining AP installed on the PC. 6. Enter the same pin code on both sides. 7. Select service at Service menu you want. Here we choose ASYNC service. 8. Press Active Service button. 31 Installing the Microsoft ActiveSync To synchronize the Mobile System with a PC, we need to install the Microsoft ActiveSync Program on the PC. Please refer the detail installation procedures to the Microsoft official website. Check the Assigned Bluetooth Serial Com Port Check to see what the Bluetooth serial port is assigned. The COM port is assigned according to the Bluetooth Device you use. It is only checked for the first time. The following Bluetooth Settings window is captured by IVT Bluetooth dongle and the pertaining AP. The screen various according to the AP you install. 1. Open the Bluetooth AP and check the COM Port that is assigned. 2. Select the View > Service menu on the toolbar of IVT AP. We will see the assigned Serial Port. In this case, it is mapped to COM7 or COM8. We will need the assigned COM Port to set up for the Microsoft ActiveSync Program. The setting only happens in the first time. 32 Setup COM Port in the ActiveSync Program The COM port is only setup for the first time. 1. Open the Microsoft ActiveSync Program on your PC. 2. Choose File > Connection Settings menu on the toolbar. A Connections Settings dialog box will appear. 3. Enable the Allow connections to one of the following check box and select the COM Port options. In this case we choose COM 7. 4. Press OK button to save the connection settings. Connecting the Mobile System to the Bluetooth enabled PC 1. Click Start > Run to run repllog in the text box. 2. Press OK button. A Bluetooth Status dialog box will pop up. Press 33 Hide to hide the message. 3. After running the repllog, the Mobile System connects to the PC automatically and a New Partnership is requested to set up for the first time. 4. Press Next button. 5. A Select Synchronization Settings window will appear. 6. Press Setting for your own setting inquiry. 7. Press Next button to the Setup Complete Window. 34 8. To press Finish button to complete the setup procedure. Disconnecting the PC 1. Go to Start > Settings > Control Panel > Bluetooth Device on the Mobile System. 2. Press Deactive Service button to disable the service and disconnect the PC. 35 3-2-5 Bluetooth File Transfer (FTP) To transfer files from a PC to the Mobile System, please turn on the Bluetooth connection and scanning the Bluetooth enabled PC In this case, we use IVT Bluetooth Dongle and the pertaining AP as an example. The screen various according to the AP you install. 1. Enabling the Bluetooth connection, see the Chapter 3-2-1. 2. Scanning the destination PC, see the Chapter 3-2-2. 3. Press Bluetooth File Transfer Service on the IVT Bluetooth AP. A Remote Shared Folder window will appear. 4. Put files on it by performing copy-and-past. 5. Right Click on the file and press Execute to transfer the file to your system. 36 Access the files on the Mobile System 1. To Select My Device icon on Today Screen. 2. Click View > Options on the toolbar. 3. To disable the 3 check boxes on the Folder Options dialog box. 4. You will see the Temp folder appears on the My Device Window. 5. If the files transferring is successful. It will create a FTP folder in the Temp Folder automatically. All the transferring files are put in the folder. 37 3-3 Backup and Restoring the System 3-3-1 Go to Start > Control Panel > Device Config. BBackup the System To restore the system, please follow Chapter 3-3 then the below steps. 1. Select Backup tab then enable the Entire the registry on your device and the All your files on your device check boxes. 38 4 5 2. Press Browse button if you want to specify the location Backup Files to be saved to. 3. Press Backup button to start backup the system. 3-3-2 Restoring the System To restore the system, please follow Chapter 3-3 then the below steps. 1. Press Restore. 2. Press OK of RESET NOW dialog to finish the Restore.
Note: System Restore means to restore the system to the latest Backup version. 39 3-4 Switching the Admin / User mode 1. Please follow below steps to access the Mode Change screen. Start Menu > Settings > Control Panel > Password > Enter Password (default is 1111) 2. The Password Properties dialog will popup after entering the password (default), select the Mode you want. Press OK to save the setting. 3. If the mode being switched, the Mode Changed dialog will popup. Press OK to restart the system. 40 3-5 Power Management Settings 3-5-1 CPU Power Mode Settings 1. Select Start > Control Panel > FPM button 2. Select the mode you want on the FPM window.
Note: The CPU Power Consumption is ranked as:
Performance Mode > Dynamic Power Management >
Power Saving Mode. 41 3-5-2 System Configuring Power Mode Settings 1. Click Start > Control Panel > Power button 2. Select Schemes tab. 3. Set up the power mode as Battery Power or AC Power in the Power Scheme drop down menu. 4. To set up the times you want on each option for turning the Mobile System off or going to standby mode after a period of inactivity. a. Switch state to User Idle. b. Switch state to System Idle. c. Switch state to suspend. 5. Press OK to save the settings. 42 3-5-3 Display Backlight Settings 1. Go to Start > Control Panel. 2. Double click on the Display icon. 3. In the Display Properties window, select Backlight tab. 4. You can enable the backlight savings by checking and setting turn-off time in the checkboxes of Battery power, External power and Enable Dim Mode 5. To drag the Bright Level slider on MIN MAX scale for Battery Power and External (AC) power. 6. Press OK button to save the settings.
Note: If you enable the Dim Mode, the system runs Dim Mode prior to Battery power and External power. 43 3-5-4 WiFi Power Mode Settings 1. To tap Start > Control Panel > Network and Dial-up Connections button. 2. Hold to press GSPI86861 button until the drop down menu appears. 3. Press Enable in the drop down menu to active the WiFi Connection. 4. After step c, the GSPI86861 setup window as above right figure will pop up. 5. To tap the Advance tab. 6. To set up the Power Management by dragging the slider on the Best Performance Best Battery scale.
Note: To conserve more battery power, drag the slider toward the Best Battery which also reduces the WiFi signal performance. To improve signal performance, drag the slider toward the Best Performance which also consumes more power and shorten the battery life. 44 3-6 LED Indicator Description The LED indicator is located in the front of the Mobile System which indicates the status of Power on/off, the Main Battery and WiFi Link. The Description as follows:
Green color LED:
Battery power charging state(S/W) LED ON: Battery power charging finished (100%) Orange color LED:
Battery power charging state(S/W) LED ON: Battery power charging Blue color LED:
Link status of WiFi manager (H/W) LED ON: WiFi link active Red color LED:
Battery power state(S/W) LED Flash: Battery low LED ON: Critical battery low 45 3-7 Resetting the Mobile System The mobile system provides functions of Reset to the factory default settings and cold boot. The detail procedures as bellows:
3-7-1 Reset to the Factory Default Settings 1. Use a tool to gently press the Reset Hole on the rear of the Mobile System while keep holding down the Power Button throughout until the system vibration occurs. 2. Release the Reset Hole and press the Power Button the second time after the system vibration occurs. 3. The calibration instruction window will pop up to lead you to the Reset to the factory default settings. 4. Completing the Calibration window instructions. 5. Press Yes to accept the reset. 6. Click Yes to confirm again. 7. System rest window appears as above far right picture. 46 3-7-2 Cold Boot 1. Use a tool to gently press the Reset Hole on the rear of the Mobile System while keep holding the Power Button throughout. 2. Release the press of Reset Hole and the Power Button at the same time after system vibration occurs. 3. System reboot to Today Screen as above picture shows.
Note: Today Screen slightly varies according to the OS version installed. 47 4 Application Programming Interface 4-1 Windows Embedded CE 5.0 Standard BInterface Introduction Most of software programming interfaces of each device are following WindowCE standard architecture to be designed.
- Core OS Service
(Uhttp://msdn.microsoft.com/en-us/library/aa450512.aspxU)
- Kernel
(HUhttp://msdn.microsoft.com/en-us/library/aa450998.aspxUH) BProgramming interface of RAM file system
File system and storage management
(HUhttp://msdn.microsoft.com/en-us/library/ms892386.aspxUH) BProgramming interface of Persistent storage Folder name: Backup
- Block Drivers
( H Uhttp://msdn.microsoft.com/en-us/library/ms923712.aspx U File system and storage management
( H Uhttp://msdn.microsoft.com/en-us/library/ms892386.aspxU H ) H ) Programming interface of Secure Digital Card Folder name: Storage Card
- Secure Digital Card Drivers
( H Uhttp://msdn.microsoft.com/en-us/library/ms923739.aspx U H )
- Block Drivers
( H Uhttp://msdn.microsoft.com/en-us/library/ms923712.aspx U File system and storage management
( H Uhttp://msdn.microsoft.com/en-us/library/ms892386.aspx U H ) H )
48 2 1 2 2 2 3 BProgramming interface of Audio
- Audio
( H Uhttp://msdn.microsoft.com/en-us/library/ms890653.aspx U H )
- Audio Drivers
( H Uhttp://msdn.microsoft.com/en-us/library/aa910103.aspx U H ) BProgramming interface of Display(LCD)
- Shell and User Interface
( H Uhttp://msdn.microsoft.com/en-us/library/aa453940.aspx U H )
- Graphic
( H Uhttp://msdn.microsoft.com/en-us/library/ms923392.aspx U H )
- Display Drivers
( H Uhttp://msdn.microsoft.com/en-us/library/aa447505.aspx U H ) BProgramming interface of USB Host
- USB Host Drivers
( H Uhttp://msdn.microsoft.com/en-us/library/ms923751.aspx U H )
- Shell, GWES, and User Interface
( H Uhttp://msdn.microsoft.com/en-us/library/aa932172.aspx U H ) BProgramming interface of MSR Reader BProgramming interface of USB Slave
- USB Function Drivers
( H Uhttp://msdn.microsoft.com/en-us/library/aa931533.aspx U H )
- USB Serial Host Driver (Activesync)
( H Uhttp://msdn.microsoft.com/en-us/library/aa932783.aspx U File system and storage management (Card Reader)
( H Uhttp://msdn.microsoft.com/en-us/library/aa914412.aspx U H ) H ) B Programming interface of Bluetooth
- Bluetooth HCI Transport Driver
( H Uhttp://msdn.microsoft.com/en-us/library/aa924569.aspx U H )
- Networking - Core 49 2 5 2 6 2 7 2 8 2 9
( H Uhttp://msdn.microsoft.com/en-us/library/aa917156.aspx U H )
- Networking - Remote
( H Uhttp://msdn.microsoft.com/en-us/library/aa920180.aspxU H )
- Networking Wireless (Bluetooth)
( H Uhttp://msdn.microsoft.com/en-us/library/aa917877.aspx U H ) BProgramming interface of Wireless
- Network Driver Uhttp://msdn.microsoft.com/en-us/library/aa919639.aspx U Uhttp://msdn.microsoft.com/en-us/library/aa917156.aspx U
- Networking - Core
- Networking - Remote
( H
( H
( H Uhttp://msdn.microsoft.com/en-us/library/aa920180.aspx U
- Networking Wireless (Wi-Fi)
( H Uhttp://msdn.microsoft.com/en-us/library/aa916578.aspx U H ) H ) H ) H ) BProgramming interface of Touch
Touch Screen Drivers
( H Uhttp://msdn.microsoft.com/en-us/library/aa925927.aspx U H )
- Shell, GWES, and User Interface
( H Uhttp://msdn.microsoft.com/en-us/library/aa932172.aspx U H ) BProgramming interface of Button
- Keyboard Drivers
( H Uhttp://msdn.microsoft.com/en-us/library/aa932012.aspx U H )
- Shell, GWES, and User Interface
( H Uhttp://msdn.microsoft.com/en-us/library/aa932172.aspx U H ) BProgramming interface of Vibrator
- Notification LED Drivers
( H Uhttp://msdn.microsoft.com/en-us/library/aa925927.aspx U H )
- Shell, GWES, and User Interface
( H Uhttp://msdn.microsoft.com/en-us/library/aa932172.aspx U H ) B 50 3 1 3 2 3 3 3 4 3 5 Programming interface of System Power
- Battery Drivers (Battery)
( H Uhttp://msdn.microsoft.com/en-us/library/aa932396.aspx U H )
- Power Management (Power status battery/DC)
( HUhttp://msdn.microsoft.com/en-us/library/aa923906.aspxUH ) Programming interface of Power Management
- Power Management
( H Uhttp://msdn.microsoft.com/en-us/library/aa923906.aspx U H ) 51 4-2 Non WindowsCE Standard 4-2-1 Admin/User Mode Application Architecture Introduction:
System provides three pair of directories to map the working folder of each operating mode. Working folders name of Admin mode
/Windows/Desktop File folder for saving the shortcut of application program in the Desktop.
/Windows/Programs File folder for saving the shortcut of application program in the Programs tab at start menu.
/Windows/StartUp File folder for saving the shortcut of application program in the StartUp folder where to be used to auto-run the programs during OS booting phase . Working folders name of User mode
/Windows/Desktop_ File folder for saving the shortcut of application program in the Desktop.
/Windows/Programs_ File folder for saving the shortcut of application program in the Programs tab at start menu.
/Windows/StartUp_ File folder for saving the shortcut of application program in the StartUp folder where to be used to auto-run the programs during OS booting phase. 52 Switching between Admin mode and User mode There is a control box in control panel applet, named - Password, The Manufacturer redefine the password policy of WindowCE standard. The password control box should input the password in advance to enter the page for finding the selection items of changing the operating mode and/or reset the default password. The default password is 1111. Step:
1. Find Password control box from control panel applet. 2. Enter password: 1111 (Default) 3. Select User mode or Admin mode. 4. Type the OK button of password properties control box. 5. Type the OK button of Mode Chang dialog for double confirmation. 6. System would reboot automatically to the selected mode. How to use this feature?
System Integrator only has to copy the desired files to the working folders of each mode. It is impossible to change the operation mode by reset system to factory default. In case user forgets the password. The only way to achieve the password is to run the Manufacturer maintenance application by copying the application to SD card and cold reset the device. Step:
1. Copy the desired files to the working folder of the operation mode 2. Follow Section Switch the operation mode between Admin mode and User mode to switch operation mode. 53 4-2-2 Overwrite Factory Default Architecture Introduction:
The Manufacturer provides a mechanism to merge the OEM application and OEM specific settings into WindowCE operating system during booting phase. This feature can make OEM stuffs as system default components. There are many benefits for device maintenance. It is a valuable feature for OEM doesnt have to reinstall OEM programs after end user reset the device to factory default mode. This benefit also helps to reduce the RMA cost from OEM vender. Because of this system architecture, WindowCE operating system and OEM application programs are not merged together. So both parts can be upgraded separately. Architecture of the OEM Device Manager System Integrator should base on the directory structure of WindowCE to prepare the OEM installation files in SD card. All files in GHARST file directory would be copy into WindowCE file system during cold booting phase. By the way, the config files in configfiles directory are for system registry maintenance. GHARST Oem.cfg System.cfg Configfiles Windows Program Files My Documents Documents and Settings Temp 54 Merge an application program into default operating system by using the OEM Device Manager u Example:
For Auto-running the OEM application at booting phase of user mode when after reset to factory default. 1. Create a file directory GHARST in root folder of SD card. 2. Change into GHART folder to create directory Windows. 3. Change into Windows folder to create directory StartUp_. 4. Copy the OEM application file into Windows->StartUp_ folder.
[Second way is: copy OEM application file into Windows folder, creates a lnk file of OEM application and copy it into Windows->StartUp_ folder. 5. Put SD card into the SD socket on B21 device. 6. Use OEM Device Manager to merge all files in GHARST folder in SD card into device. After the file integration process, all OEM specify files will be the system default components of B21 device.
- Place the OEM application at Programs folder in Windows Start menu - System running in user mode. 1. Create a file directory GHARST in root folder of SD card. 2. Change into GHART folder to create directory Windows. 3. Change into Windows folder to create directory Programs_. 4. Copy the OEM application file into Windows->Programs_ folder.
[Second way is: copy OEM application file into Windows folder, creates a lnk file of OEM application and copy it into Windows->Programs_ folder]
5. Put SD card into the SD socket on B21 device. 6. Use OEM Device Manager to merge all files in GHARST folder in SD card into device. After the file integration process, all OEM specify files will be the system default components of B21 device. How to overwrite the factory default settings by using the OEM Device Manager Two config files are used to modify the registry settings of factory default mode. System Integrator is easy to add and/or modify the registry key without upgraded the image of WindowsCE operating system. The way to remove the registry key is to put empty to the key value in the config file. System.cfg Using for early registry initialization stage at booting phase. 55 Oem.cfg Using for system registry initialization stage at booting phase. u Example:
- Overwrite the factory default backlight level setting. 1. Create a file directory GHARST in root folder of SD card. 2. Change into GHART folder to create directory configfiles. 3. Prepare the oem.cfg config file by text editor. Input following setting:
[HKEY_CURRENT_USER\ControlPanel\BackLight]
"BatteryBacklightLevel"=dword:7
"ACBacklightLevel"=dword:A 4. Copy oem.cfg file into configfiles folder. 5. Put SD card into the SD socket on B21 device. 6. Use OEM Device Manager to merge all files in GHARST folder in SD card into device. After the integration process, all OEM desired settings will be the system default settings of B21 device.
- Overwrite the default WiFi state to power on mode. (Default is power down) 1. Create a file directory GHARST in root folder of SD card. 2. Change into GHART folder to create directory configfiles. 3. Prepare the system.cfg config file by text editor. Input following setting:
[HKEY_LOCAL_MACHINE\Comm\NdisPower]
"GSPI86861"=dword: 0 ;0(D0), 1(D1), 2(D2 ), 3(D3), 4(D4)-Default 4. Copy system.cfg file into configfiles folder. 5. Put SD card into the SD socket on B21 device. 6. Use OEM Device Manager to merge all files in GHARST folder in SD card into device. After the integration process, all OEM desired settings will be the system default settings of B21 device.
- Remove a registry key from the registry in factory default settings Only have to put the key equal to empty. factory manager will remove the specify key from default system registry setting. Example:
[HKEY_LOCAL_MACHINE\RegistryKey]
"ValueName"=
56 Overwrite Factory Default Registry Settings for OEM Customization (oem.cfg)
; 0: Performance mode, 1: PS mode
; PS mode (0,1,2,3,4 most power
<1> Bluetooth operating mode
[HKEY_LOCAL_MACHINE\ System\State\Hardware\Bluetooth]
BluetoothOn=dword:1 ; 1- > BT on, 0->BT off BluetoothWakeUpEnable=dword:0 ;1- > Enable, 0-> Disable
<2> WiFi operating mode
[HKEY_LOCAL_MACHINE\Comm\NdisPower]
GSPI86861=dword:4 ; 0- > WiFi on, 4->WiFi off
[HKEY_LOCAL_MACHINE\Comm\ GSPI86861\Parms]
PowerMode = dword:1 MultipleDTim=dowrd:2 saving)
<3> Screen rotation feature
[HKEY_LOCAL_MACHINE\System\GDI\Rotation]
Angle=dword:1 ;(Decimal 0->0 degree, 90->90 degree, 180->180 degree, 270->270 degree) // Manual rotate mode AutoRotate=dword:F // Auto Rotate control
; bit 0 = 0 (180 degree
; bit 1 = 0 (90 degree
; bit 2 = 0 (0 degree
; bit 3 = 0 (270 degree
<4> Backlight control
[HKEY_CURRENT_USER\ControlPanel\BackLight]
// Backlight level of battery only
"BatteryBacklightLevel"=dword:7
// Backlight level of AC IN mode
"ACBacklightLevel"=dword:A
"BatteryTimeout"=dword:3c // Backlight timeout value of battery only mode
"ACTimeout"=dword:258
"DimTimeOut"= dword:1E
"UseBattery"=dword:0 Enable/Disable
"UseExt"=dword:0
"UseDim"=dword:0 ignored) = 1 (180 degree accepted) ignored) = 1 (90 degree accepted) ignored)
= 1 (0 degree accepted)
// Backlight DIM mode timeout
// Battery only mode timeout ignored) = 1 (270 degree accepted)
; bit 15 = 0 (Manual rotate)
= 1 (Auto Rotate)
// AC IN mode timeout Enable/Disable
// Backlight DIM mode
// Backlight timeout value of AC IN mode 57
"ProfileType"=dword:0 Enable/Disable
<5> Keypad control
[HKEY_LOCAL_MACHINE\Drivers\ BuiltIn\KEYPAD]
"KeyPadSet0"=dword:27280000
"KeyPadSet1"=dword:25260000
<6> CPU operating frequency control Option1: Dynamic Mode
[HKEY_LOCAL_MACHINE\Drivers\ BuiltIn\IPM]
Option2: Performance Mode
[HKEY_LOCAL_MACHINE\Drivers\ BuiltIn\IPM]
"Speed"=dword:0 Option3: Power Saving Mode
[HKEY_LOCAL_MACHINE\Drivers\ BuiltIn\IPM]
"Speed"=dword:4
"ProfileType"=dword:1
"ProfileType"=dword:1 58 Application program of the OEM Device Manager Snapshoot of OEM Device Manager
: oem.cfg file update
: system.cfg file update System Layer OEM Layer Press OK button to merge the GHARST directory and specified layer config files into OS image 59 Overwrite display backlight settings Once the backlight is enabled, you can set separately both battery backlight setting and backlight setting of AC power. System Integrator can use Control Panel to change the setting values or modify the following registry keys to change settings. Note that the units for the timeout values are in seconds Registry Key:
[HKEY_CURRENT_USER\ControlPanel\Backlight]
Modify display backlight settings for AC power Values:
- UseExt
- ACTimeout
- ACBacklightLevel
: 1 (Enable/default) / 0 (Disable)
: 15/30/60/120/300/600(default)/900/1800
: 0/1/2/3/4/5/6/7/8/9/10(default) Modify display backlight settings for battery power Values:
- UseBattery
- BatteryTimeout
- BatteryBacklightLevel
: 1 (Enable/default) / 0 (Disable)
: 15/30/60(default)/120/300
: 0/1/2/3/4/5/6/7(default)/8/9/10 Modify display backlight settings for DIM mode Values:
- UseDim
- DimTimeout
: 1 (Enable/default) / 0 (Disable)
: 15/30(default)/60/120/300 TCHAR szRegClass[] = TEXT("DWORD");
HKEY hRegBacklight;
DWORD dwDisposition;
if(ERROR_SUCCESS == RegCreateKeyEx(HKEY_CURRENT_USER, Example Code (Update backlight level) void UpdateRegistry(DWORD dwVal)
L"ControlPanel\\Backlight", 0, szRegClass, REG_OPTION_NON_VOLATILE, 0, NULL, &hRegBacklight, &dwDisposition)) LONG lResult;
DWORD dwType = REG_DWORD;
DWORD dwLe n = sizeof(DWORD);
60
// Battery Level lResult = RegSetValueEx(hRegBacklight, L"BatteryBacklightLevel",
// AC Level lResult = RegSetValueEx(hRegBacklight, L"AcBacklightLevel", 0, 0, dwType, (LPBYTE)&dwVal, dwLen);
dwType, (LPBYTE)&dwVal, dwLen);
RegCloseKey(hRegBacklight);
61 4-2-3 Programmable button feature Five buttons designed on front bottom of B21 device. Keypad driver will report the Windows virtual key code what described in a registry key to system when button to be pressed. System Integrator can modify the registry key value of each button separately. The modification will work on next button pressed instantly.
- One key with combination function: combined Power button and Enter button functions into one button. This button is a fix function button, no available API for function modification.
4 programmable buttons: defined to be 4 way navigation keys by system default mode. All buttons can be re-programmed to one of the number of Windows keyboard virtual key code to redefine the button function by registry modification. Registry key definition Registry Key:
[HKEY_LOCAL_MACHINE\Drivers\BuildIn\KEYPAD]
Value Name KeyPadSet0 KeyPadSet1 DWORD (HEX) 27 (Right) 25 (Left) 28(Down) 26 (Up) 00 00 00 00 Windows virtual key code Virtual key codes Symbolic constant Hexadecimal value Mouse or keyboard equivalent VK_LBUTTON 01H Left mouse button VK_RBUTTON 02H Right mouse button VK_CANCEL 03H Control-break processing VK_MBUTTON 04H Middle mouse button on a three-button mouse 05H-07H Undefined 62 VK_BACK VK_TAB 08H 09H BACKSPACE key TAB key 0AH-0BH Undefined VK_CLEAR 0CH VK_RETURN 0DH CLEAR key ENTER key 0EH-0FH Undefined VK_SHIFT 10H VK_CONTROL 11H VK_MENU VK_PAUSE 12H 13H SHIFT key CTRL key ALT key PAUSE key VK_CAPITAL 14H CAPS LOCK key 15H-19H Reserved for Kanji systems 1AH VK_ESCAPE 1BH Undefined ESC key 1CH-1FH Reserved for Kanji systems VK_SPACE VK_PRIOR VK_NEXT VK_END VK_HOME VK_LEFT VK_UP VK_RIGHT VK_DOWN 20H 21H 22H 23H 24H 25H 26H 27H 28H SPACEBAR PAGE UP key PAGE DOWN key END key HOME key LEFT ARROW key UP ARROW key RIGHT ARROW key DOWN ARROW key 63 VK_SELECT 29H SELECT key 2AH Specific to original equipment manufacturer VK_EXECUTE 2BH EXECUTE key VK_SNAPSHOT 2CH PRINT SCREEN key VK_INSERT 2DH VK_DELETE 2EH INS key DEL key VK_HELP 2FH HELP key 3AH-40H Undefined VK_LWIN 5BH VK_RWIN 5CH VK_APPS 5DH Left Windows key on a Microsoft Natural Keyboard Right Windows key on a Microsoft Natural Keyboard Applications key on a Microsoft Natural Keyboard 5EH-5FH Undefined VK_NUMPAD0 60H Numeric keypad 0 key VK_NUMPAD1 61H Numeric keypad 1 key VK_NUMPAD2 62H Numeric keypad 2 key VK_NUMPAD3 63H Numeric keypad 3 key VK_NUMPAD4 64H Numeric keypad 4 key VK_NUMPAD5 65H Numeric keypad 5 key VK_NUMPAD6 66H Numeric keypad 6 key VK_NUMPAD7 67H Numeric keypad 7 key VK_NUMPAD8 68H Numeric keypad 8 key VK_NUMPAD9 69H Numeric keypad 9 key 64 VK_MULTIPLY 6AH Multiply key VK_ADD 6BH Add key VK_SEPARATOR 6CH Separator key VK_SUBTRACT 6DH VK_DECIMAL 6EH Subtract key Decimal key VK_DIVIDE 6FH Divide key VK_F1 VK_F2 VK_F3 VK_F4 VK_F5 VK_F6 VK_F7 VK_F8 VK_F9 VK_F10 VK_F11 VK_F12 VK_F13 VK_F14 VK_F15 VK_F16 VK_F17 VK_F18 70H 71H 72H 73H 74H 75H 76H 77H 78H 79H 7AH 7BH 7CH 7DH 7EH 7FH 80H 81H F1 key F2 key F3 key F4 key F5 key F6 key F7 key F8 key F9 key F10 key F11 key F12 key F13 key F14 key F15 key F16 key F17 key F18 key 65 VK_F19 VK_F20 VK_F21 VK_F22 VK_F23 VK_F24 82H 83H 84H 85H 86H 87H F19 key F20 key F21 key F22 key
(PPC only) Key used to lock device. F23 key F24 key 88H-8FH Unassigned VK_NUMLOCK 90H NUM LOCK key VK_SCROLL 91H SCROLL LOCK key VK_LSHIFT VK_RSHIFT A0H A1H VK_LCONTROL A2H VK_RCONTROL A3H VK_LMENU VK_RMENU A4H A5H Left SHIFT Right SHIFT Left CTRL Right CTRL Left ALT Right ALT 66 BA-C0 Specific to original equipment manufacturer; reserved. See following tables. C1-DA Unassigned DB-E2 E3 E4 E5 E6 Specific to original equipment manufacturer; reserved. See following tables. Specific to original equipment manufacturer Unassigned Specific to original equipment manufacturer Used to pass Unicode characters as if they were keystrokes. If VK_PACKET is used with SendInput, then the Unicode character to be delivered should be placed into the lower 16 bits of the scan code. If a keyboard message is removed from the message queue and the virtual key is VK_PACKET, then the Unicode character will be the upper 16 bits of the lparam. Unassigned Specific to original equipment manufacturer ATTN key CRSEL key EXSEL key Erase EOF key PLAY key ZOOM key Reserved for future use PA1 key CLEAR key VK_PACKET E7 VK_ATTN VK_CRSEL VK_EXSEL VK_EREOF VK_PLAY VK_ZOOM VK_NONAME VK_PA1 E8 E9-F5 F6 F7 F8 F9 FA FB FC FD VK_OEM_CLEAR FE VK_KEYLOCK F22 Key used to lock device 67 Example code void ModifyKeyCode(DWORD data)
{ //modify the virtual key code of up button HKEY hKeyPad = NULL;
TCHAR RegStr[14], if (ERROR_SUCCESS == RegOpenKeyEx(HKEY_LOCAL_MACHINE, L"Drivers\\BuiltIn\\KEYPAD", 0, 0, &hKeyPad))
wsprintf(RegStr,L"KeyPadSet0"); //assign value name of up button dwSize = sizeof(DWORD);
if (ERROR_SUCCESS == RegQueryValueEx(hKeyPad, RegStr, NULL,
&dwType, (LPBYTE)& SaveReg, &dwSize))
data = (data << 24) & 0xff000000;
SaveReg = (SaveReg &0x00ffffff) | data; // modify the virtual key code of up button RegSetValueEx(hKeyPad, RegStr, NULL, dwType, (LPBYTE)&SaveReg, dwSize);
RegCloseKey(hKeyPad);
68 4-2-4 Vibration notification feature A vibrator is designed into this device for notification usage. The vibrator driver is following the notification LED driver architecture of WindowCE to be developed. This architecture is easy for System Integrator using WindowCE NLED standard API for application development, and also provides the advantage of backward compatibility. Data Structure introduction struct NLED_SETTINGS_INFO
UINT LedNum;
INT OffOnBlink;
LONG TotalCycleTime;
LONG OnTime;
LONG OffTime;
INT MetaCycleOn;
INT MetaCycleOff;
LedNum LED number. Virbrator is zero (0). OffOnBlink Current setting. The following table shows the defined values. Value Description 0 1 2 Off On Blink TotalCycleTime Total cycle time of a blink, in microseconds. (Not support default 0) OnTime On time of the cycle, in microseconds. (Not support default 0) OffTime Off time of the cycle, in microseconds. (Not support default 0) MetaCycleOn Number of on blink cycles. (Not support default 0) 69 MetaCycleOff Number of off blink cycles. (Not support default 0) Example code
#include "stdafx.h"
NLED_SETTINGS_INFO ledSettingsInfo = { 0 };
void SetVibratorOn(void)
ledSettingsInfo.LedNum = 0;
ledSettingsInfo.OffOnBlink = 0;
if(!NLedSetDevice(NLED_SETTINGS_INFO_ID,&ledSettingsInfo)) MessageBox(L"NLED ghNLED = NULL!!",L"Error",MB_OK);
70 5 Optional Accessory Installation 5-1 USB Cable There is only USB port with WindowsCE ActiveSync function to be exposed to software developer to develop and debug their software application. A specific application program located in Application Folder and named as USB.EXE to provide manual USB Activesync connection. A specific USB cable would be required. USB Cable Snapshot To PC To Mobile Optional USB Cable is for functioning Synchronization with PC and Software uploading or Debug. 71 5-1-1 Synchronization via USB Cable To synchronize the Mobile System with PC, please install the Microsoft Active Sync program on each PC first. The set-up of a Partnership will be requested once after connecting the USB Cable to the Mobile System and PC. The Synchronization will be running automatically after Microsoft Active Sync and Partnership Set-up being installed successfully and the USB Cable is connected. Please refer the detail installation procedure of ActiveSync program to the Microsoft official website. 72 5-1-2 Installing the USB Cable To Mobile To PC 1. Unscrew the screws (2) on the back cover of the Mobile System to access the Connector Slot. 2. Connect the white connector to the Mobile System. 3. Connect the USB Connector to the PC device to communicate the Mobile System and the PC. PC 73 5-1-3 Start the Synchronization After installing the Microsoft ActiveSync program at your PC, please enable it. You will see the Connecting is running automatically after USB Cable is connected the Mobile System and PC.
NOTE: If the Connecting is not running automatically, please go to the Chapter 5.3.3 to connect manually 74 1. The Microsoft ActiveSync window will show Connected after USB Cable is successfully connected.
Note: To choose Options tab to set up the customized Synchronization items on your own. 2. Double click the Mobile Device icon by opening My Computer to access the documents or files saved in the Mobile System. 5-1-4 Enable the Synchronization Manually If the synchronization is not running automatically after connecting the USB Cable to your PC and the Mobile System, please follow below steps. 1. Double-click on the My Device icon on Today screen. 2. Double-click on the Application Data folder. 3. Double-click on the usb icon. 75 4. Select USB tab 5. Press Connect button. 6. Select ActiveSync tab. 7. Select ACTIVE SYNC button. 8. Press OK button. 76 5-2 MSR Module Installation 1. Unscrew the screws (2) on the rear side of the Mobile System. 2. Slide upward to open the Connector Cover to access the connector slot. 3. Connect MSR cable to the respective connector on the connector slot of the Mobile System. 77 4. To make sure the metal juts are entered to the right position of the system. 5. Use the attached screws (2) to fix the MSR module to the Mobile system as above photo shows. 78 6. Finished. Front view of the MSR module and the Mobile system. 79 5-3 2-in-1 MSR and Scanner Module Installation MSR Cable Scanner Cable 1. To open the connector cover on the Mobile System first by following the steps in Chapter 5.2.1 2. Connect cables (2) to the respective connectors on the connector slot of the Mobile System. 3. To make sure the metal juts are entered into the right position of the Mobile System. 80 4. To use the attached screws (2) to fix the 2-in-1 MSR module to the Mobile System. 5. Finished. The front view of the 2-in-1 MSR and Scanner Module with the Mobile System. 81
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2009-09-02 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2009-09-02
|
||||
1 | Applicant's complete, legal business name |
FLYTECH TECHNOLOGY CO., LTD
|
||||
1 | FCC Registration Number (FRN) |
0018869826
|
||||
1 | Physical Address |
No. 168, Sing-ai Rd., Neihu District, Taipei City
|
||||
1 |
Taipei City
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@telefication.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
XHM
|
||||
1 | Equipment Product Code |
P2340000
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
A**** Z********
|
||||
1 | Telephone Number |
886-2******** Extension:
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
a******@flytech.com.tw
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Neutron Engineering Inc.
|
||||
1 | Name |
A**** C******
|
||||
1 | Physical Address |
B1, No. 37, Lane 365, YangGang St.
|
||||
1 |
Taipei, 114
|
|||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
+886-******** Extension:
|
||||
1 | Fax Number |
+886-********
|
||||
1 |
a******@neutron.com.tw
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Handheld POS | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is conducted (peak). Average RF power is below SAR-threshold. End-users must be provided with specific operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
BTL Inc.
|
||||
1 | Name |
A****** C******
|
||||
1 | Telephone Number |
886-2******** Extension:
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
a******@neutron.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412 | 2462 | 0.13 | ||||||||||||||||||||||||||||||||||||
1 | 2 | 15C | 2402 | 2480 | 0.0008 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC