submitted | available | document details (if available) | source link |
---|---|---|---|
various | Manual | Users Manual | 693.72 KiB |
SMARTWATCH SW200 Quick Start Guide Please read this manual before use. Visit us at www.slideusa.com or contact us at support@slideusa.com SAFETY WARNING Please charge the watch for at least two hours prior to its first use. If prompted for a password, enter 1122. This is the default password. You can change the password under Settings, in the Security Settings menu. PRODUCT DETAILS Power Button: Power the watch On/Off, turn the screen On/Off, or return to the Main Menu. Micro USB Port: Charge or transfer data to/from the device. Touch Screen: Available functions will be shown on the touch screen, and can be controlled by simply touching them and following the instructions. QUICK CONTROLS Slide the screen to the left to change to the next page. Slide the screen to the right to return to the previous page. Swipe from the top of the screen to the bottom to bring up the Settings menu. Swipe from the bottom of the screen to the top to bring up the available applications. CLOCK DESIGN To change the clock face, touch the center of the screen when the clock is active. You can cycle through the different styles of clock face. The watch will automatically save the most recently selected clock face. USING YOUR SMARTWATCH FOR ANDROID PHONES:
Scan the QR code to the right to download the app and sync your phone. Always update the Sync software as updates become available. FOR IOS PHONES: Turn on Bluetooth on both the watch and the phone. Then, from the watch, go to the Bluetooth option in the menu and touch Search for New Device. Locate your phone, and connect the two. Make sure to allow the Phone Book to be shared, as that will help with displaying incoming notifications. You can also connect by searching for the watch on your phones Blue-
tooth screen. Follow the same steps as above. BASIC FUNCTIONS These functions can be found in the Main Menu:
Messaging: Sync with your phone to receive messages. Bluetooth Call Logs Dialer Phone Book Remote Notifier: Incoming notifications or SMS messages from the connected phone receive alerts on the watch. Remote Camera: Control the phone cam-
era with your watch. Anti-Lost: Locate your phone using your watch, and vice versa. Settings Pedometer Sleep Monitoring: Show your sleep quality, based on sleep time. Sedentary Reminder: Set a reminder to get up and exercise, preventing you from staying stationary for too long. Quick Response: Provides the QR code to download the Sync Software on your phone. Alarm Calendar File Manager Audio Player: Play music loaded onto the watch, or on your phone. Camera Calculator Audio Player Image Viewer Sound Recorder Browser: Requires a SIM Card. SIM CARD AND MEMORY The watch accepts SIM Cards for wireless usage and MicroSD Cards as an internal memory source. To install both, remove the back case off of the watch, and remove the battery. You will see a sliding metal fixture for the SIM Card. Slide it to Open and insert the SIM Card. Next to the SIM Card slot is a place for the MicroSD Card. Make sure both are secure before inserting the battery and back case. NOTES It usually takes about 1-2 hours to achieve a full charge. Use the included cable and charger to charge the watch. You can use your Android ac-
cessories with the watch. Bluetooth will disconnect when the phone is too far from the watch. Reconnect with the watch if Bluetooth becomes disconnected for any reason. When reconnecting, agree to the Phone Book sync to receive notifications properly on your watch. TROUBLESHOOTING Unable to Turn the Watch On The power button may not be held for long enough. Press and hold the power button for at least 3 seconds. The watch may have low power. Charge the watch fully, then attempt to turn the watch on. Watch Shuts Down Automatically The watch may have low power. Charge the watch fully. Usage Time is Short The battery may not be adequately charged. Charge the watch fully. When using a SIM Card, the power may run out quickly if the signal is poor. Move to a location with better signal. Unable to Charge Check that the charger is working, and try using another Micro USB Cable for charging. Check that the connection in the Micro USB Port is good. Wrong Caller Name on Watch The Phone Book may not have synced when the watch initially connected to the phone. Discon-
nect, then reconnect the phone and watch, and select Sync Phone Book when prompted. Poor Voice Quality on Phone Calls The watch and phone may be too far apart. Move them closer together. The signal may be bad for the phone. Try to move to a location with better phone signal. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Your wrist watch is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the mouth is 0.131W/Kg and when worn on the body, as described in this user guide, is 0.518W/Kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID:
2AJVKSW200 Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements. 49
This product uses the FCC Data API but is not endorsed or certified by the FCC