FCC ID: 2AZNY-K60 Music Box

Music Box K60 English Please read this manual carefully before using the product. Keep it in a safe place for future reference. SAFETY INFORMATION 1. There are high voltage zones inside this unit that can cause injuries. Please do not open the unit. In case of technical failure, please contact us. 2. Never place the unit in the rain or in moist zones so as to avoid a fire or an electric shock. 3. This device uses a laser system. To prevent direct exposure to the laser beam, please do not open the unit or stare at the laser beam. 4. If technical maintenance is required, please contact us. 5. If the supply cord is damaged in any way, please have it replaced by the manufacturer, supplier or a qualified electrician. CAUTION 1. Do not place the unit on an unstable surface as it may fall and break or cause damage to people or pets. 2. Disconnect the unit from the mains before cleaning it. Do not use cleaning liquids or sprays. Use only a soft, damp cloth. 3. To avoid possible damage to the equipment, please unplug it during storms or when it will not be used for a long time. 4. Do not insert any object into the unit through the ventilation openings as this could cause a short circuit and start a fire. Do not pour liquid on the speaker. Please Do not charge the speaker while playing the music over 80%

volume otherwise the charging device will be damaged and it is not in warranty. PACKAGE LIST 1* Speaker unit 2* Microphone 1* Remote Control 1* Power cable 1* User Manual MODE INSTRUCTION WIRELESS BT MODE Press BT until you enter BT Paring Mode.

- Once entering Bluetooth mode, your speaker will automatically enter pairing mode if not already paired to another device.

- Search for the model number K60/K61 on your Bluetooth settings on your smart device, and select it.

- Once selected, your smart device and speaker will connect. Once connected you can control your speaker through top panel controls or your smart device. LINE IN MODE Press MODE until you enter AUX.

- Make sure you have a 3.5mm AUX cable plugged into your audio device from the AUX port on the top of Speaker.

- In AUX mode, you can only control the functions through the audio device. Though you can adjust the volume on either device. FM RADIO MODE Press MODE until you enter FM Radio.

- Press the P/P (Play/Pause) button to auto scan FM Radio stations and store it automatically.

- Press the NEXT or PREVIOUS buttons to navigate through FM Radio Stations. USB AND TF CARD MODE NOTE: Please make sure you connect a USB or TF Card drive into the USB/TF Card port located on the top of the speaker.

- Press MODE until you enter USB/TF Card mode.

- You can use the control on the top of your speaker to navigate through songs (tracks), play/pause, volume. K60 TWS MODE NOTE: In order to work for TWS Mode, you must have 2 of the same speakers next to each other. Both speakers, please action as the below:

-Take one speaker as the host, another speaker as the deputy and make sure the deputy speaker enter Bluetooth mode.

- On the host speaker, press and hold TWS button until the display show "TUS".

- On the the deputy speaker, the display show "SLAU" without flickering. Two units connect successfully.

- You can select USB/TF Card/Bluetooth/Aux/FM mode on the host speaker and the deputy will follow as the same.

- You can adjust the main volume and navigate the songs (previ-

ous/pause/play/next) on either of the speaker and two speakers action in sync.

- Press and hold "TWS" button again can quit the TWS mode. TOP CONTROL PANEL INTRODUCTION FOR K60 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1. Wired Microphone input: Plug wired microphone into these jack. 2. AUX in: Play the music of the device connected to the AUX input. 3. TF card input: Insert TF Card to play. 4. USB input: Insert USB to play. 5. Mic.Vol: Adjust Microphone volume level. 6. Echo Volume 7. Outdoor/Indoor Mode: Press to choose outdoor and indoor mode. 8. Bluetooth function AC100~240V 50/60Hz 9. Mode: Short press to select LINE (Aux-In)/USB /FM /Wireless BT. Long press to turn on or turn off voice prompt. 10. Power: ON/OFF Power 11. Treble volume 12. Bass volume 13. Main Volume: Turn the knob to adjust master volume level. 14. Light switch: Press to change light color and light style. 15. Next song: Short press to get next sound/channel. Long press to fast forward. Previous song: Short press to get previous sound/channel. Long press to fast backward. Pause&Play: Short press to Pause and Play music. Long press to TWS function. 16. LCD display screen 17. AC 100-240V input REMOTE CONTROL INTRODUCTION 1 2 3 4 5 6 7 8 9 10 19 18 17 16 15 14 13 12 11 1. Stand by for K60 (Press to enter or quit the standby mode when power on). Power off for K61. 2. Number buttons: Under USB/TF mode to choose songs. 3. Echo+/-

4. Previous Song/station:

- Under BT/USB/TF card mode -

previous song.

- Under FM mode- previous station. Pause&Play:

- Pause or Play the music.

- In FM mode, enter "Auto Scan"

function. Next song/station:

- Under BT/USB/TF card mode - next song.

- Under FM mode- next station. 5. Treble+/-

6. Microphone Volume+/-

7. BASS+/-

8. Microphone Treble+/-

9. Microphone Priority: When play music and use microphone at the same time, the microphone sound from the speaker will be in priority. 10. Repeat: Repeat one song or all songs. 11. Record function

- Under USB/TF card mode, press "REC" button to record the sound through wired or wireless mic. The recording file will be save in USB/TF card.

- Record play: Long press to play the recording source. 12. Recording Delete: Delete the recording sources in USB/TF card. 13. Microphone Bass+/-

14. Light switch button 15. Speaker Volume+/-

16. Switch from different folders. 17. EQ function: Press to select Pop/Rock/Jazz/Classical/Flat EQ mode. 18. MUTE: Available to be mute at any mode. 19. Mode: Press to skip to Wireless BT/LINE IN/USB/TF/FM mode. TROUBLESHOOTING If you encounter problems when using this speaker, check the following points before requesting service. No power Ensure that the Adapter plug of the speaker is connected properly. Ensure that there is power at the DC outlet. No sound or poor sound Adjust the volume. Disconnect the headphones. Check that the speakers are connected correctly. Check if the stripped speaker wires are clamped. No response from the speaker Disconnect and reconnect the Adapter plug, then turn on the speaker again. Remote control does not work Before you press any function button, first select the correct source with the remote control instead of the main unit. Reduce the distance between the remote control and the unit. Insert the battery with its polarities(+/-signs)alignedas indicated. Replace the battery. Aim the remote control directly at the sensor on the front of the speaker. SPEAKER SPECIFICATION Bluetooth version: V5.0 Bluetooth receiving range: 13M Charging time: 2.5h Use time: 5-6 hours Signal-to-noise ratio: 65dB Sensitive value: 86dB Amplifier power: 20W*2 U disk/TF card format: FAT, FAT32 K60 audio support formats: WAV, FLAC, WMA, MP3, APE K61 audio support formats: WAV, FLAC, WMA, MP3 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer-

ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour-

aged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ISED Statement English:This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3

(B)/NMB-3(B). French: Cet appareil contient des metteurs/rcepteurs exempts de licence qui sont conformes aux RSS exempts de licence d'Innovation, Sciences et Dveloppement conomique Canada. L'exploitation est soumise aux deux conditions suivantes :

(1) Cet appareil ne doit pas provoquer d'interfrences.

(2) Cet appareil doit accepter toute interfrence, y compris les inter-

frences susceptibles de provoquer un fonctionnement indsirable de l'appareil. l'appareil numrique du ciem conforme canadien CAN ICES-3

(B)/NMB-3(B). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. cet appareil est conforme l'exemption des limites d'valuation courante dans la section 2.5 du cnr - 102 et conformit avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des donnes cana-

diennes sur l'exposition aux champs rf et la conformit. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. Cet quipement est conforme aux limites d'exposition aux rayonne-

ments du Canada tablies pour un environnement non contrl. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement doit tre install et utilis une distance minimale de 20 cm entre le radiateur et votre corps. US CA MX FCC STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FR DCLARATION FCC: Cet appareil est conforme la partie 15 de la rglementation du FCC. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer 'interfrences nuisibles, et (2) cet appareil doit accepter toute interfrence reue, y compris les interfrences pouvant entraner un fonctionnement indsir-

able. ES DECLARACIN DE LA FCC: Este depositivo cumple con la Parte 15 de las Reglas de la FCC. La operacin est sujeta a las siguientes dos condi-

ciones: (1) el depositivo no debe causar interferencias perjudiciales, y (2) el depositivo debe aceptar cualquier interferencia recibida, incluida interferencia que pueda causar operacin no deseado. 65 https://www.tonormic.com support@tonormic.com EASTWEST ELECTRONIC COMMERCE CO., LIMITED LEVEL 54 HOPEWELL CENTRE 183 QUEEN'S ROAD EAST HONG KONG EASTWEST ELECTRONIC COMMERCE CO US LIMITED 3500 SOUTH DUPONT HIGHWAY, SUITE G106 DOVER, DE 19901 UNITED STATES LIFEWIT LIMITED FLAT 237, 233 HIGH STREET CROYDON SURREY ENGLAND CR0 1FY UNITED KINGDOM Lifewit GmbH Friedenstrae 5 97072 Wuerzburg Germany MADE IN CHINA

Page 1 of 1 FCC ID: 2AZNY-K60 IC: 30108-K60 Label and Location Music Box Model No.: K60 FCC ID: 2AZNY-K60 IC: 30108-K60 HVIN : K60 Size: L: 3.5cm*W: 3.0cm Label Location Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster@lcs-cert.com | Web: www.lcs-cert.com Scan code to check authenticity

Fujian EastWest Lifewit Technology Co.,LTD Rm 1201-1205,Bld 18,2nd Phase of Innovation Park, no.7,Wulongjiang Mid-

Ave,Fuzhou High-tech Zone Fuzhou, Fujian Province China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-8-21 To whom it may concern:

We, Fujian EastWest it Technology Co.,LTD, hereby certify that the equipment for which authorization is sought (FCC ID: 2AZNY-K60) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (hitps://www foc. gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.914(b) and (4)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 DO1 Sincerely, Yon bi) Li Signature Yanbing Li Product Director Fujian EastWest Lifewit Technology Co.,LTD

Fujian EastWest Lifewit Technology Co.,LTD Add: Rm 1201-1205,Bld 18,2nd Phase of Innovation Park, no.7, Wulongjiang Mid-

Ave, Fuzhou High-tech Zone Fuzhou, Fujian Province China Date: 2023-8-21 FCC ID: 2AZNY-K60 Dear Sir/Madam, We, Fujian EastWest Lifewit Technology Co.,LTD Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:

Product name: Music Box Model no.: K60, K61, K60A, K60B Sincerely, Yon bs} U:

Name/Title : Yanbing Li/Product Director Company: Fujian EastWest Lifewit Technology Co,LTD Address: Rm 1201-1205,Bld 18,2nd Phase of Innovation Park, no.7,Wulongjiang Mid-Ave,Fuzhou High-tech Zone Fuzhou, Fujian Province China Phone: +86-13655006868 Fax: +86-13655006868 E-Mail liyb@lifewit.com

Sincerely, Name/Title Yanbing Li/Product Director Company:

Address:

Fujian EastWest Lifewit Technology Co.,LTD Rm 1201-1205,Bld 18,2nd Phase of Innovation Park, no.7,Wulongjiang Mid-Ave,Fuzhou High-tech Zone Fuzhou, Fujian Province China

+86-13655006868

+86-13655006868 liyb@lifewit.com Phone:

Fax:

E-Mail:

Fujian EastWest Lifewit Technology Co.,LTD Rm 1201-1205,Bld 18,2nd Phase of Innovation Park, no.7, Wulongjiang Mid-Ave,Fuzhou High-tech Zone Fuzhou, Fujian Province China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-8-21 To whom it may concern:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behaffin all matters relating to applications for equipment authorization FCC ID: 2AZNY-KG60 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website wwweurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 Sincerely, Yon bi) Li Name/Title: Yanbing Li/Product Director Company: Fujian EastWest Lifewit Technology Co.,LTD Address: Rm 1201-1205,Bld 18,2nd Phase of Innovation Park, no.7,Wulongjiang Mid-Ave Fuzhou High-tech Zone Fuzhou, Fujian Province China Phone: +86-13655006868 Fax: +86-13655006868 E-Mail: liyb@lifewit.com

Fujian EastWest Lifewit Technology Co.,LTD Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 8/21/2023 Fujian EastWest Lifewit Technology Co.,LTD acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought

(FCC ID: 2AZNY-K60):

Name and company of U.S. agent:

EASTWEST ELECTRONIC COMMERCE CO US LIMITED Physical U.S. address of agent:

3500 South Dupont Highway Dover Delaware 19901 United States FRN of U.S. agent:

0033602186 Email address of U.S. agent:

linxiong@lifewit.com EASTWEST ELECTRONIC COMMERCE CO US LIMITED acknowledges their obligation to accept service of process on behalf of Fujian EastWest Lifewit Technology Co.,LTD. Fujian EastWest Lifewit Technology Co.,LTD with the FRN 0030816284 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Yanbing Li 5 0 V Product Director Signature XUEFANG TANG Director Fujian EastWest Lifewit Technology Co.,LTD EASTWEST ELECTRONIC COMMERCE CO US LIMITED

, U

) 7

) d

1 1 9

. 2 _ t n e g A _ S U

l e d o m

_ 8 4