all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
users manual 1 | Users Manual | 1.64 MiB | ||||
1 2 |
|
users manual 2 | Users Manual | 1.51 MiB | ||||
1 2 |
|
users manual 3 | Users Manual | 1.84 MiB | ||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Internal Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Test Report | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | RF Exposure Info |
1 2 | users manual 1 | Users Manual | 1.64 MiB |
FCC ID: EJE-WB0031 (IC: 337J-WB0031) Report No. M050534_Cert_WM3B2200BG_BT APPENDIX H USER MANUAL (PART 1) This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au E Series.book Page 1 Wednesday, April 14, 2004 10:28 AM Copyright Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited. The following are registered trademarks of IBM Corporation: IBM, IBM PC AT, IBM PS/2. The following are registered trademarks of Microsoft Corporation: MS, MS-DOS, Windows. PCMCIA is a trademark of the Personal Computer Memory Card International Association. Earthlink is a registered trademark of EarthLink Network, Inc. Intel and Pentium are registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. The Bluetooth trademark is owned by Bluetooth SIG, Inc., USA. Adobe Acrobat Reader is a registered trademark of Adobe Systems, Inc. Netscape 7.0 is a registered trademark of Netscape Communications Corporation. PowerQuest and Drive Image are registered trademarks of PowerQuest Corporation. Norton AntiVirus is a registered trademark of Symantec Corporation. Cop y ri ght BayManager is a registered trademark of Softex, Inc. The DVD player found in some models of the LifeBook notebook incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights users. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless authorized by Macrovision Corporation. Reverse engineering or disas-
sembly is prohibited. Dolby Headphone manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Copy-
rights 1992-1999 Dolby Laboratories. All rights reserved. All other trademarks mentioned herein are the property of their respective owners. Warning Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Was h hands after handling. Copyright 2004 Fujitsu Computer Systems Corpora-
tion. All rights reserved. No part of this publication may be copied, reproduced, or translated, without prior written consent of Fujitsu. No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu. B6FH-1931-01EN-00 (DRAFT) DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name:
Address:
Telephone:
Declares that product:
Fujitsu Computer Systems Corporation 1250 E. Arques Avenue, M/S 122 Sunnyvale, CA 94085
(408) 746-6000 Base Model Configurations:
LifeBook C1320 notebook LifeBook C1320D notebook Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions:
(1) This device must not be allowed to cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation. E Series.book Page 2 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k E Series.book Page 3 Wednesday, April 14, 2004 10:28 AM T a b l e o f C o n t e n t s Fujitsu LifeBook E8000 Notebook Table of Contents 1 PREFACE Preface About This Guide . 1 Fujitsu Contact Information . 1 Limited Warranty . 1 2 GETTING TO KNOW YOUR LIFEBOOK Overview Unpacking . 5 Locating the Controls and Connectors Top and Front Components . 6 Left-Side Panel Components . 7 Right-Side Panel Components . 8 Back Panel Components . 9 Bottom Components . 10 Status Indicator Panel Power Indicator . 11 AC Adapter Indicator . 11 Battery Level Indicators . 11 Battery Charging Indicators . 12 DVD/CD-RW/CD-ROM Drive Access Indicator .12 Hard Drive or Removable Media Drive Access Indicator. 12 PC Card Access Indicators . 12 NumLk Indicator. 12 CapsLock Indicator . 12 ScrLk Indicator . 12 Security Indicator . 12 Keyboard Using the Keyboard . 13 Numeric Keypad. 13 Windows Keys . 13 Cursor Keys . 13 Function Keys. 14 Touchpad Pointing Device Clicking . 15 Double-Clicking . 15 Dragging . 16 Touchpad Control Adjustment . 16 Scrolling . 16 Optional Quick Point Feature . 16 Volume Control Controlling the Volume . 17 Flexible Bay Devices Removing and Installing Modular Devices. 18 LifeBook Security/Application Panel Setting up Your LifeBook Security Panel . 20 Passwords . 20 Operating Your LifeBook Security/
Application Panel. 21 Precautions. 21 Uninstalling the Security Panel Application . 21 Launching Applications with the Security/Application Panel . 22 3 GETTING STARTED Power Sources Connecting the Power Adapters . 27 Display Panel Opening the Display Panel . 28 E Series.book Page 4 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Adjusting Display Panel Brightness. 28 Closing the Display Panel. 28 Starting Your LifeBook Notebook Power On . 29 Boot Sequence. 29 BIOS Setup Utility . 29 Booting the System . 30 Windows Product Activation . 30 Registering Your LifeBook Notebook . 31 Installing Click Me! . 31 Power Management Power/Suspend/Resume Button . 32 Suspend Mode. 32 Hibernation (Save-to-Disk) Feature . 33 Display Timeout. 33 Hard Disk Timeout. 33 Windows Power Management. 33 Restarting the System . 33 Power Off . 33 4 USER-INSTALLABLE FEATURES Lithium ion Battery Recharging the Batteries . 37 Replacing the Battery. 38 Optical Drive Media Player Software. 39 Loading Media on Your Drive . 39 Removing Media . 40 Using the Media Player Software . 40 Using Dolby Headphone . 41 Using Media Player on Battery Power . 41 External USB Floppy Disk Drive Loading a Disk . 42 Ejecting a Disk . 42 Preparing a Disk for Use . 42 PC Cards Installing PC Cards. 43 Removing PC Cards . 43 Smart Card Reader. 44 Memory Upgrade Module Installing Memory Upgrade Modules. 45 To Remove a Memory Upgrade Module . 45 Checking the Memory Capacity. 46 Port Replicator Back Panel Components . 47 Front Panel Components . 48 Attaching the Port Replicator. 48 Locking the Port Replicator . 49 Detaching the Port Replicator . 49 Device Ports Modem (RJ-11) Telephone Jack. 50 Internal LAN (RJ-45) Jack . 50 Parallel Port . 50 Serial Port . 51 PS/2 Port. 51 Docking Port . 51 Universal Serial Bus Ports . 51 Infrared Port . 51 Stereo Line-In Jack. 52 IEEE 1394 Port. 52 Headphone Jack . 52 Microphone Jack . 52 External Monitor Port . 52 5 TROUBLESHOOTING Troubleshooting Your System Identifying the Problem . 55 Specific Problems. 55 Troubleshooting Table . 56 Power On Self Test Messages . 64 Emergency media Player Drive Tray Release . 65 Modem Result Codes . 65 Restoring Your Pre-installed Software . 66 Drive Image Special Edition (DISE) . 66 Automatically Downloading Driver Updates . 67 E Series.book Page 5 Wednesday, April 14, 2004 10:28 AM 6 CARING FOR YOUR LIFEBOOK Care and Maintenance Batteries . 72 Floppy Disks and Drives . 72 Media Care . 72 PC Cards . 73 7 SYSTEM SPECIFICATIONS Specifications Configuration Label . 77 Microprocessor. 77 Chipset. 77 Memory . 77 Video . 77 Audio . 77 Mass Storage Device Options. 77 Features . 78 Device Ports . 78 Keyboard . 78 Power. 78 Dimensions and Weight . 79 Environmental Requirements . 79 Popular Accessories . 79 Pre-Installed Software . 79 Learning About Your Software . 79 8 GLOSSARY/REGULATORY Glossary . 83 Regulatory Information . 89 T a b l e o f C o n t e n t s APPENDIX:
WIRELESS LAN USERS GUIDE Before Using the Wireless LAN For better communications . 97 Stopping transmission. 98 Starting Transmission . 98 Connection using Wireless Zero Configuration Tool Flow of operations . 99 Preparation for wireless LAN connection . 99 Connection to the network. 101 Connection using Atheros Client Utility Flow of operations . 104 Preparation for wireless LAN connection . 104 Connection to the network. 105 Other settings Setting of power-saving function . 108 Troubleshooting the WLAN Troubleshooting . 109 Wireless LAN Glossary Glossary . 112 IP address information Additional Information . 114 Specifications Specification . 115 Using the Bluetooth Device What is Bluetooth. 116 Where to Find Information About Bluetooth . 116 INDEX Index . 117 E Series.book Page 6 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k E Series.book Page 1 Wednesday, April 14, 2004 10:28 AM 1 Preface E Series.book Page 2 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k E Series.book Page 1 Wednesday, April 14, 2004 10:28 AM Preface ABOUT THIS GUIDE The LifeBook E8000 notebook from Fujitsu is a powerful computer, powered by an Intel Pentium M micropro-
cessor. Depending upon the configuration, the notebook has either a built-in 15 TFT XGA or SXGA+ color display. This system brings the computing power of desktop personal computers (PCs) to a portable envi-
ronment. This manual explains how to operate your LifeBook notebooks hardware and built-in system software. Your notebook is compatible with the IBM PC AT. Your computer comes with Microsoft Windows XP Home, or XP Professional pre-installed. Conventions Used in the Guide Keyboard keys appear in brackets. Example: [Fn], [F1], [ESC], [ENTER] and [CTRL]. Pages with additional information about a specific topic are cross-referenced within the text. For example: (See page xx.) On screen buttons or menu items appear in bold Example: Click OK to restart your LifeBook notebook. DOS commands you enter appear in Courier type. Example: Shutdown the computer?
The information icon highlights information that will enhance your understanding of the subject material. The caution icon highlights information that is important to the safe operation of your computer, or to the integrity of your files. Please read all caution information carefully. The warning icon highlights information that can be hazardous to either you, your LifeBook notebook, or your files. Please read all warning information carefully. P r e f a c e FUJITSU CONTACT INFORMATION Service and Support You can contact Fujitsu Service and Support in the following ways:
Toll free: 1-800-8Fujitsu (1-800-838-5487) E-mail: 8fujitsu@us.fujitsu.com Web site: us.fujitsu.com/computers Before you place the call, you should have the following information ready so that the customer support representative can provide you with the fastest possible solution:
Product name Product configuration number Product serial number Purchase date Conditions under which the problem occurred Any error messages that have occurred Type of device connected, if any Fujitsu Online You can go directly to the online Fujitsu Product catalog for your LifeBook notebook by clicking on the LifeBook Accessories Web site URL link located in the Service and Support Software folder of the Windows Start menu. You can also reach Fujitsu Service and Support online by clicking on the Service and Support Web site URL link, located in the Service and Support Software folder of the Windows Start menu. You must have an active internet connection to use the online URL links. LIMITED WARRANTY Your LifeBook notebook is backed by a Fujitsu Interna-
tional Limited Warranty. Check the service kit that came with your notebook for the Limited Warranty period and terms and conditions. 1 E Series.book Page 2 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k 2 E Series.book Page 3 Wednesday, April 14, 2004 10:28 AM 2 Getting to Know Your LifeBook Notebook 3 E Series.book Page 4 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k 4 E Series.book Page 5 Wednesday, April 14, 2004 10:28 AM G e t t i n g t o K n o w Y o u r L i f e B o o k Figure 2-1. Fujitsu LifeBook E8000 notebook Overview This section describes the components of your Fujitsu LifeBook E8000 notebook. We strongly recommend that you read it before using your notebook even if you are already familiar with notebook computers. UNPACKING When you receive your LifeBook notebook, unpack it carefully, and compare the parts you have received with the items listed below. For a pre-configured model you should have:
LifeBook E8000 notebook (Figure 2-1) AC adapter with AC power cord (Figure 2-2) Lithium ion Battery, pre-installed Weight Saver Phone/Modem (RJ-11) telephone cable Driver and Application Restore (DAR) Disc Getting Started Guide Users Guide (this document) International Limited Warranty Brochure Microsoft-associated product materials Depending on your system configuration, one of the following devices will be pre-installed in the Flexible Bay:
Weight Saver Modular Super-Multi DVD Drive Modular DVD/CD-RW combo drive Modular CD-ROM drive Depending on your system configuration, the following optional items may be included with your system:
Modular 2nd bay battery External USB floppy disk drive Depending on your configuration, you may receive the following application CDs:
DVD Application CD CD-RW Application CD Once you have checked and confirmed that your Life-
Book system is complete, read through the following pages to learn about all of your notebooks components. Figure 2-2 AC Adapter 5 E Series.book Page 6 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Status Indicator Panel Stereo Speaker Touchpad Pointing Device Wireless LAN/Bluetooth On/Off Switch Left Button Scroll Button Display Panel LifeBook Security/
Application Panel Power/
Suspend/
Resume Button Stereo Speaker Keyboard Display Panel Latch Right Button Quick Point Cursor Control (optional) Figure 2-3. LifeBook notebook with display open Locating the Controls and Connectors TOP AND FRONT COMPONENTS The following is a brief description of your LifeBook notebooks top and front components. Display Panel The display panel is a color LCD panel with back lighting for the display of text and graphics. LifeBook Security/Application Panel The LifeBook Security/Application Panel provides hardware security and one-touch application launch capability. (See LifeBook Security/Application Panel on page 20 for more information) Power/Suspend/Resume Button The Power/Suspend/Resume button allows you to suspend notebook activity without powering off, resume your LifeBook notebook from suspend mode, and power on your notebook when it has been shut down from Windows. (See Power/Suspend/Resume Button on page 32 for more information) Stereo Speakers The built-in dual speakers allow for stereo sound. 6 Keyboard A full-size keyboard with dedicated Windows keys. (See Keyboard on page 13 for more information) Touchpad Pointing Device The Touchpad pointing device is a mouse-like cursor control with three buttons: two mouse-like buttons, and a scroll button. (See Touchpad Pointing Device on page 15 for more information) Quick Point Cursor Control (optional) The optional Quick Point control offers an additional method for moving the cursor. (See Optional Quick Point Feature on page 16 for more information) Display Panel Latch The display panel latch locks and releases the display panel. Wireless LAN/Bluetooth On/Off Switch The wireless LAN/Bluetooth on/off switch is used to power on and off the optional WLAN and/or Bluetooth device. Switching the device off when not in use will help to extend battery life. Status Indicator Panel The Status Indicator Panel displays symbols that corre-
spond with a specific component of your LifeBook note-
book. (See Status Indicator Panel on page 11 for more information) E Series.book Page 7 Wednesday, April 14, 2004 10:28 AM G e t t i n g t o K n o w Y o u r L i f e B o o k External Monitor Port
(behind door) IEEE 1394 Jack Microphone Jack PC Card Slots DC Power Jack Air Vents Line In Jack Headphone Jack PC Card Eject Button Figure 2-4. LifeBook notebook left-side panel LEFT-SIDE PANEL COMPONENTS The following is a brief description of your LifeBook notebooks left-side components. External Monitor Port The external monitor port allows you to connect an external monitor. (See External Monitor Port on page 52 for more information) IEEE 1394 (4-pin) Jack The 4-pin 1394 jack is used to connect between your LifeBook and an IEEE 1394 peripheral such as a digital video camera. (See IEEE 1394 Port on page 52 for more information) Microphone Jack The microphone jack allows you to connect an external mono microphone. (See Microphone Jack on page 52 for more information) PC Card Slot The PC Card Slots allow you to install two Type I or Type II PC Cards or one Type III PC Card. (See PC Cards on page 43 for more information) Stereo Line-in Jack The stereo line-in jack allows you to connect an external audio source. (See Stereo Line-In Jack on page 52 for more information) Headphone Jack The headphone jack allows you to connect headphones or powered external speakers. (See Headphone Jack on page 52 for more information) DC Power Jack The DC power jack allows you to plug in the AC adapter to power your LifeBook notebook and charge the internal Lithium ion battery. 7 E Series.book Page 8 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Modem (RJ-11) Jack
(CD-ROM/DVD/CD-RW drive/battery) Flexible Bay USB 2.0 Port Anti-Theft Lock Slot Flexible Bay Eject Lever Figure 2-5. LifeBook notebook right-side panel RIGHT-SIDE PANEL COMPONENTS The following is a brief description of your LifeBook notebooks right-side components. Modem (RJ-11) Telephone Jack The Modem (RJ-11) telephone jack is for attaching a telephone line to the internal multinational 56K modem. (See Modem (RJ-11) Telephone Jack on page 50 for more information) The internal modem is not intended for use with Digital PBX systems. Do not connect the internal modem to a Digital PBX as it may cause serious damage to the internal modem or your entire notebook. Consult your PBX manufacturers documentation for details. Some hotels have Digital PBX systems. Be sure to find out BEFORE you connect your modem. The internal multinational modem is designed to the ITU-T V.90 standard. Its maximum speed of 53000bps is the highest allowed by FCC, and its actual connection rate depends on the line conditions. The maximum speed is 33600 bps at upload. For additional information about the multinational modem, refer to the Fujitsu web site at: us.fujitsu.com/computers Flexible Bay The Flexible Bay can accommodate one of the following devices. (See Flexible Bay Devices on page 18 for more information) Modular USB Floppy Disk Drive Modular CD-ROM drive Modular DVD/CD-RW combo drive Modular Super-Multi DVD Drive Modular Lithium ion battery Weight Saver Flexible Bay Eject Lever The Flexible Bay eject lever releases the Flexible Bay device. USB 2.0 Port The USB 2.0 port allows you to connect Universal Serial Bus devices. USB 2.0 transfers data at up to 480Mbps and is backward-compatible with USB 1.1 devices, which transfer data at up to 12Mbps. (See Universal Serial Bus Ports on page 51 for more information) Anti-theft Lock Slot The anti-theft lock slot allows you to attach an optional physical lock down device. 8 E Series.book Page 9 Wednesday, April 14, 2004 10:28 AM G e t t i n g t o K n o w Y o u r L i f e B o o k Infrared Port USB 2.0 Ports LAN (RJ-45) Jack Figure 2-6. LifeBook notebook back panel BACK PANEL COMPONENTS Following is a brief description of your LifeBook note-
books back panel components. Infrared Port The fast IrDA compatible port allows you to communi-
cate with another IrDA compatible infrared device without a cable. (See Infrared Port on page 51 for more information) USB 2.0 Ports The USB 2.0 ports allow you to connect Universal Serial Bus devices. USB 2.0 transfers data at up to 480Mbps and is backward-compatible with USB 1.1 devices, which transfer data at up to 12Mbps. (See Universal Serial Bus Ports on page 51 for more information) LAN (RJ-45) Jack The internal LAN (RJ-45) jack is used for an internal Gigabit (10Base-T/100Base-Tx/1000Base-T/Tx) Ethernet LAN connection. (See Internal LAN (RJ-45) Jack on page 50 for more information) 9 E Series.book Page 10 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Lithium ion Battery Bay Certificate of Authenticity
(approximate location) Main Unit and Configuration Label Hard Disk Drive/
Bluetooth Compartment Figure 2-7. LifeBook notebook bottom panel Port Replicator Connector Memory Upgrade Compartment Hard Disk Drive/Bluetooth Compartment This compartment houses the system hard disk drive and the optional Bluetooth device. (Note that the optional wireless LAN device is located under the keyboard). Under normal circumstances, it should not be necessary to open this compartment. BOTTOM COMPONENTS The following is a brief description of your LifeBook notebooks bottom panel components. Port Replicator Connector This connector allows you to connect the optional Port Replicator to your notebook. Memory Upgrade Compartment Your LifeBook notebook comes with high speed Double Data Rate Synchronous Dynamic RAM (DDR SDRAM). The memory upgrade compartment allows you to expand the system memory capacity of your LifeBook notebook, hence improving overall performance. (See Memory Upgrade Module on page 45 for more informa-
tion) Lithium ion Battery Bay The battery bay contains the internal Lithium ion battery. It can be opened for the removal of the battery when stored over a long period of time or for swapping a discharged battery with a charged Lithium ion battery.
(See Lithium ion Battery on page 37 for more information) Main Unit and Configuration Label The configuration label shows the model number and other information about your LifeBook notebook. In addition, the configuration portion of the label has the serial number and manufacturer information that you will need to give your support representative. It identi-
fies the exact version of various components of your notebook. 10 E Series.book Page 11 Wednesday, April 14, 2004 10:28 AM G e t t i n g t o K n o w Y o u r L i f e B o o k 1 2 Power Battery Identifier Battery Charging Hard Drive Access NumLk ScrLk AC Adapter Battery Level Media Player Drive Access PC Card Access
(PC Card Slot) CapsLk Security Figure 2-8. Status Indicator Panel Status Indicator Panel The Status Indicator displays symbols that correspond with a specific component of your Fujitsu LifeBook notebook. These symbols tell you how each of those components are operating. (Figure 2-8) POWER INDICATOR The Power indicator symbol states whether your system is operational. It has several different states, each of which tells you the mode your notebook is in. Steady On: This means that there is power to your LifeBook notebook and that it is ready for use. Flashing: This means that your LifeBook notebook is in Suspend mode. Steady Off: This means that your system is either in Save-to-Disk mode, or that your LifeBook notebook has been turned off. If you are charging your battery, the Power indicator will remain on even if your notebook is shut off. The Power indicator will also remain on if you have either adapter connected and are shut down from Windows. AC ADAPTER INDICATOR The AC Adapter indicator states whether your notebook is operating from the AC adapter, the Auto/Airline adapter or the batteries. This icon has two different states that can tell you what power source your LifeBook notebook is using. On: This means that either of the adapters are currently in use. Off: Power is only coming from the batteries, and you do not have an adapter connected. BATTERY LEVEL INDICATORS The two Battery Level indicators state whether or not the primary Lithium ion battery and/or the optional second Lithium ion battery are installed (Battery 1 refers to the primary Lithium ion battery, while Battery 2 refers to the Flexible Bay optional second battery). In addition, this symbol states how much charge is available within each installed battery. The symbol will only be displayed for a battery that is currently installed in your LifeBook note-
book. (Figure 2-9) 76%100% Charging 76%100%
51%75%
26%50%
11%25%
Low Warning <11%
Critical Low or Dead Battery Shorted Battery Figure 2-9 Battery Level Indicator 11 PC CARD ACCESS INDICATORS The PC Card Access indicators display whether or not your notebook is accessing a PC Card. The indicator will flash if your software tries to access a PC Card even if there is no card installed. (See PC Cards on page 43 for more information) NUMLK INDICATOR The NumLk indicator states that the integral keyboard is set in ten-key numeric keypad mode. CAPSLOCK INDICATOR The CapsLock indicator states that your keyboard is set to type in all capital letters. SCRLK INDICATOR The ScrLk indicator states that your scroll lock is active. SECURITY INDICATOR The Security Indicator flashes (if a password was set) when the system resumes from Off or Standby modes. You must enter the password that was set in the Security Panel before your system will resume operation. E Series.book Page 12 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k A shorted battery is damaged and must be replaced. (Figure 2-9) BATTERY CHARGING INDICATORS Located to the left of each of the Battery Level indicators is a small arrow symbol. This symbol states whether that specific battery is charging. This indicator will flash if the battery is too hot or cold to charge. Batteries subjected to shocks, vibration or extreme temperatures can be permanently damaged. DVD/CD-RW/CD-ROM DRIVE ACCESS INDICATOR The DVD/CD-RW/CD-ROM Access indicator tells you that the DVD/CD-RW/CD-ROM drive is being accessed. If the Auto Insert Notification function is active, the indicator will flash periodically when your system is checking the DVD/CD-RW/CD-ROM drive. If the Auto Insert Notification function is not active, the indicator will only flash when you access the DVD/CD-RW/CD-
ROM drive. The default setting is the Auto Insert Notifi-
cation function active. The DVD/CD-RW/CD-ROM Auto Insert Notification function will periodically check for a DVD/CD-RW/CD-ROM installed in the drive, causing the DVD/CD-RW/CD-
ROM Access indicator to flash. The DVD/
CD-RW/CD-ROM Auto Insert Notification function allows your system to automatically start a DVD/CD-RW/CD-
ROM as soon as it is inserted in the drive and the tray is closed. It will begin playing an audio DVD/CD or will start an application if the DVD/CD has an auto-
run file HARD DRIVE OR REMOVABLE MEDIA DRIVE ACCESS INDICATOR The Hard Drive Access indicator states whether your internal hard drive is being accessed. The Hard Drive Access indicator does not show which hard drive is being accessed. 12 E Series.book Page 13 Wednesday, April 14, 2004 10:28 AM G e t t i n g t o K n o w Y o u r L i f e B o o k Function Keys Home End Fn Key Start Key Numeric Keypad
(surrounded by heavy line) Application Key Cursor Keys Figure 2-10 Keyboard Keyboard USING THE KEYBOARD Your Fujitsu LifeBook notebook has an integral 84-key keyboard. The keys perform all the standard functions of a 101-key keyboard, including the Windows keys and other special function keys. This section describes the following keys. (Figure 2-10) Numeric keypad: Your notebook allows certain keys to serve dual purposes, both as standard characters and as numeric and mathematical keys. The ability to tog-
gle between the standard character and numerical keys is controlled through the [NumLk] key. Cursor keys: Your keyboard contains four arrow keys for moving the cursor or insertion point to the right, left, up, or down within windows, applications and documents. Function keys: The keys labeled [F1] through [F12], are used in conjunction with the [Fn] key to produce special actions that vary depending on what program is running. Windows keys: These keys work with your Windows operating system and function the same as the onscreen Start menu button, or the right button on your pointing device. NUMERIC KEYPAD Certain keys on the keyboard perform dual functions as both standard character keys and numeric keypad keys. NumLk can be activated by pressing the [NumLk] keys. Turning off the NumLk feature is done the same way. Once this feature is activated you can enter numerals 0 through 9, perform addition ( + ), subtraction ( - ), multiplication ( * ), or division ( / ), and enter decimal points ( . ) using the keys designated as ten-key function keys. The keys in the numeric keypad are marked on the front edge of the key to indicate their secondary functions.
(Figure 2-10) WINDOWS KEYS Your LifeBook notebook has two Windows keys, consisting of a Start key and an Application key. The Start key displays the Start menu. This button functions the same as your onscreen Start menu button. The Application key functions the same as your right mouse button and displays shortcut menus for the selected item. (Please refer to your Windows documentation for additional information regarding the Windows keys.)
(Figure 2-10) CURSOR KEYS The cursor keys are the four arrow keys on the keyboard which allow you to move the cursor up, down, left and right in applications. In programs such as Windows Explorer, it moves the focus (selects the next item up, down, left, or right). (Figure 2-10) 13 E Series.book Page 14 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k FUNCTION KEYS Your LifeBook notebook has 12 function keys, F1 through F12. The functions assigned to these keys differ for each application. You should refer to your software documentation to find out how these keys are used.
(Figure 2-10) The [Fn] key provides extended functions for the notebook and is always used in conjunction with another key.
[Fn+F3]: Pressing [F3] while holding [Fn] will toggle the Audio Mute on and off.
[Fn+F4]: Pressing [F4] while holding [Fn] will toggle the Quick Point feature on and off. Note that the
[Fn+F4] combination only works if Manual Setting is selected in the BIOS. (See BIOS Setup Utility on page 29)
[Fn+F6]: Pressing [F6] repeatedly while holding [Fn]
will lower the brightness of your display.*
[Fn+F7]: Pressing [F7] repeatedly while holding [Fn]
will increase the brightness of the display.*
[Fn+F8]: Pressing [F8] repeatedly while holding [Fn]
will decrease the volume of your LifeBook note-
book.**
[Fn+F9]: Pressing [F9] repeatedly while holding [Fn]
will increase the volume of your LifeBook notebook.**
* There are eight brightness levels.
** There are 26 audio levels. 14 E Series.book Page 15 Wednesday, April 14, 2004 10:28 AM Optional Quick Point Control Cursor Control Left Button G e t t i n g t o K n o w Y o u r L i f e B o o k Scroll Button Right Button Figure 2-11. Touchpad pointing device Touchpad Pointing Device Certain E8000 LifeBook notebooks are equipped with an optional Quick Point button for moving the cursor. For more information about Quick Point, see Optional Quick Point Feature on page 16. The Touchpad pointing device comes built into your Fujitsu LifeBook notebook. It is used to control the movement of the pointer to select items on your display panel. The Touchpad is composed of a cursor control, a left and right button, and a scrolling button. The cursor control works the same way a mouse does, and moves the cursor around the display. It only requires light pres-
sure with the tip of your finger. The left and right buttons function the same as mouse buttons. The actual functionality of the buttons may vary depending on the application that is being used. The scrolling button allows you to navigate quickly through pages, without having to use the scroll bars. (Figure 2-11) An external mouse can be connected to either the USB port on your LifeBook note-
book or the USB or PS/2 ports on the optional port replicator, and used simulta-
neously with the Touchpad. However, if you boot the system with an external mouse connected the Touchpad will be disabled or enabled depending on the specifications in your BIOS settings. (See BIOS Setup Utility on page 29 for more information) CLICKING Clicking means pushing and releasing a button. To left-
click, move the cursor to the item you wish to select, press the left button once, and then immediately release it. To right-click, move the mouse cursor to the item you wish to select, press the right button once, and then immediately release it. You also have the option to perform the clicking operation by tapping lightly on the Touchpad once. (Figure 2-12) Figure 2-12 Clicking DOUBLE-CLICKING Double-clicking means pushing and releasing the left button twice in rapid succession. This procedure does not function with the right button. To double-click, move the cursor to the item you wish to select, press the left button twice, and then immediately release it. You also have the option to perform the double-click operation by tapping lightly on the Touchpad twice.
(Figure 2-13) Figure 2-13 Double-clicking 15 E Series.book Page 16 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k If the interval between clicks is too long, the double-click will not be executed. Parameters for the Touchpad can be adjusted from the Mouse Properties dialog box located in the Windows Control Panel. DRAGGING Dragging means pressing and holding the left button, while moving the cursor. To drag, move the cursor to the item you wish to move. Press and hold the left button while moving the item to its new location and then release it. Dragging can also be done using the Touchpad. First, tap the Touchpad twice over the item you wish to move making sure to leave your finger on the pad after the final tap. Next, move the object to its new location by moving your finger across the Touchpad, and then release your finger. (Figure 2-14) Figure 2-14 Dragging TOUCHPAD CONTROL ADJUSTMENT The Windows Control Panel allows you to customize your Touchpad with selections made from within the Mouse Properties dialog box. SCROLLING Using the Scrolling button allows you to navigate through a document quickly without using the windows scroll bars. This is particularly useful when you are navi-
gating through on-line pages. To use the Scrolling button, press the crescent shape at the top or bottom of the button to scroll up or down a page. When you have reached the desired section of the page, release the button. (Figure 2-15) Figure 2-15 Scrolling OPTIONAL QUICK POINT FEATURE The optional Quick Point device consists of a cursor control button at the lower center of the keyboard. It is roughly the same size and shape as a pencil eraser. The cursor control works the same way a mouse ball does, and moves the cursor around the display. It only requires light pressure to move; the more pressure you use, the faster the cursor will move. When used with the Quick Point button, the middle Touchpad button allows you to scroll up and down a screen. 16 E Series.book Page 17 Wednesday, April 14, 2004 10:28 AM Volume Control Your Fujitsu LifeBook notebook has multiple volume controls which interact with each other. Any software that contains audio files will also contain a volume control of its own. If you install an external audio device that has an independent volume control, the hardware volume control and the software volume control will interact with each other. It should be noted that if you set your software volume to Off, you will override the external volume control setting. CONTROLLING THE VOLUME The volume can be controlled in several different ways:
Volume can be set from within the Volume Control on the Taskbar. Volume can be controlled with the F8 and F9 func-
tions keys. Pressing [F8] repeatedly while holding [Fn]
G e t t i n g t o K n o w Y o u r L i f e B o o k will decrease the volume of your notebook. Pressing
[F9] repeatedly while holding [Fn] will increase the volume of your notebook. There are 26 levels through which the function keys cycle. Volume can be controlled by many volume controls that are set within individual applications. Certain external audio devices you might connect to your system may have hardware volume controls. Each source discussed above puts an upper limit on the volume level that must then be followed by the other sources. We recommend that you experiment with the various volume controls to discover the optimal sound level. 17 E Series.book Page 18 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Flexible Bay Eject Lever Flexible Bay Figure 2-16 Flexible Bay Flexible Bay Devices Your Fujitsu LifeBook notebook contains a Flexible Bay. The Flexible Bay can house an optical drive, a Lithium ion battery, and a weight saver. (Figure 2-16) Your Flexible Bay will have one of the following devices installed. Modular Super-Multi DVD drive: This allows you to access movies, software, and audio DVD/CDs and record to DVD, CD, and DVD-RAM discs. Modular DVD/CD-RW combo drive: This allows you to access movies, software, and audio DVD/CDs as well as to write to CDs. Modular CD-ROM drive: This allows you to access software, data, or audio CDs. Modular Lithium ion battery: This is a rechargeable battery that can be used to power your LifeBook note-
book when an adapter is not connected. Weight Saver: This is used to fill the bay when no device is needed. REMOVING AND INSTALLING MODULAR DEVICES There are two ways to remove and install modular devices in the Flexible Bay:
Cold-swapping: swapping devices while your LifeBook notebook is powered off. Hot-swapping: swapping devices while your system is active using the Unplug/Eject icon from your taskbar. Note that if the weight saver is installed rather than a modular device, it is not necessary to use BayManager when removing it. You should never leave your Flexible Bay empty when the notebook is in operation. If left empty, dust or foreign matter may accumulate inside the notebook. 18 Cold-swapping To cold-swap modular devices in your Flexible Bay follow these easy steps: (Figure 2-17) 1. Close any open files. 2. Shut down your LifeBook notebook. 3. Pull out the Flexible Bay eject lever. This will push your device out slightly, allowing you to remove the device. 4. Slide your device out until it is clear of the bay. This will require light force. Flexible Bay Eject Lever
(a)
(c)
(b)
(d) Figure 2-17 Removing/Installing a device in the Flexible Bay Be careful when aligning and seating devices in the bay. If the fit is incorrect, you may damage the bay or the device. If the device does not move easily in the bay, remove it, and check for dirt or foreign objects. It will require a firm push to latch the device in place. 5. Slide the device you are installing into your notebook until it clicks into place. 6. It is now safe to turn your notebook back on. 7. You can now access and use the device. E Series.book Page 19 Wednesday, April 14, 2004 10:28 AM Your LifeBook notebook will automatically detect the new device and activate it within your system. The drive letters associated with the device will be created and listed under My Computer and Windows Explorer. Hot-swapping Under Windows XP, hot-swapping is provided through the Unplug or Eject Hardware utility. The icon for the utility appears on the taskbar. Click on the icon and follow the on-screen instructions. G e t t i n g t o K n o w Y o u r L i f e B o o k 19 E Series.book Page 20 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Button 1*
Button 2*
Button 3*
Button 4*
Enter button Figure 2-18 LifeBook Security/Application Panel
* Security/Application Launcher buttons (for entering passwords and launching applications) LifeBook Security/
Application Panel A unique feature of your LifeBook notebook is the Security/Application Panel that allows you to secure your notebook from unauthorized use. The Security/Applica-
tion Panel also allows you to launch applications with the touch of a button when your system is on. If the security system is activated, upon starting your notebook or resuming from suspend mode the security system requires you to enter a password code using the buttons on the Security/Application Panel. After entering a correct password, your notebook resumes system operation. (Figure 2-18) SETTING UP YOUR LIFEBOOK SECURITY PANEL When you receive your LifeBook notebook, the security panel application is pre-installed without any passwords. The following sections provide detailed information on your security panel, and how to set, change or remove passwords. Numbered Buttons Use these buttons to enter your password.(Figure 2-18) Enter Button After entering the button strokes, push this button to enter the password into the LifeBook notebook.
(Figure 2-18) PASSWORDS The user and supervisor password may be set on this notebook. A supervisor password is typically the same for all LifeBook notebooks in a working group, office, or company to allow for system management. Individual LifeBook notebooks in a group environment should not 20 use a common password. A password consists of one to five button strokes plus the enter button. A valid stroke consists of pushing one or up to four buttons simulta-
neously. The following are valid button strokes:
n Pushing [4] by itself n Pushing [2] and [3] at the same time n Pushing [1], [2], and [4] at the same time n Pushing [1], [2], [3], and [4] at the same time The following are valid passwords. The numbers within braces ({ }) are button strokes using more than one button. n {[2]+[3]}, [1], [enter]
n [4], [enter]
n {[1]+[3]}, {[2]+[3]+[4]}, [1], [4], [2], [enter]
Setting Passwords When shipped from the factory, no passwords are set. You have a choice of having no password or setting a supervisor and user password. You must set the super-
visor password before the user password. n The purpose of supervisor password is to be able to bypass the user password in case the user password is forgotten. The supervisor password alone will not lock the system. n You have to set both the supervisor and user passwords for the security panel to work. Setting Supervisor Password You must have set a supervisor password before setting any user passwords. The supervisor password can bypass the user password. 1. Go to the Start menu. 2. Click on Run. E Series.book Page 21 Wednesday, April 14, 2004 10:28 AM 3. Type in:
C:\Program Files\Fujitsu\
Security Panel Application\
Supervisor\FJSECS.EXE, then press [Enter]
4. Follow the on-screen instructions to set the Supervisor password. Setting User Password 1 Go to the Start menu. 2. Click on Programs. 3. Click on Security Panel Application and Set User Password. 4. Follow the on-screen instructions to set the user password. You may change or remove the supervisor or user password by repeating the steps defined above. OPERATING YOUR LIFEBOOK SECURITY/
APPLICATION PANEL The security lock feature is in effect both when the system resumes from Off or suspend state. You always need to push the Suspend /Resume button to input the user pass-
word. Your system will not begin the boot sequence without entering your supervisor/user password. From Off State 1. Turn on your system. 2. When the Security Indicator flashes, enter the pass-
word and press Enter button. For example, if the password is 22222, Press Button Number 2 five times and press Enter button. The LifeBook notebook will boot to normal opera-
tion. From Suspend State 1. Press your Power/Suspend/Resume button. 2. When the Security Indicator flashes, enter the pass-
word and press Enter button. The notebook should resume normal operation. Incorrect Password Entry If an invalid supervisor or user password is entered three times in succession, the system will beep for about one minute. If a valid password is entered within a minute
(while system beeps), the beeping will stop and the note-
book will resume normal operation. If no password (or an invalid one) is entered while the system beeps, the system will return to its previous locked state (suspend or off) and the Security Indicator will go off. To reacti-
G e t t i n g t o K n o w Y o u r L i f e B o o k vate the notebook after a password failure, you must press the Power/Suspend/Resume button, then enter a correct password. Remember the user password you specified on the Security Panel Application. If you forget the password you will not be able to use your computer. The super-visor password can override the user password. PRECAUTIONS Opening and Closing the Cover Closing the cover automatically places the notebook into suspend mode. Opening the cover does not automati-
cally place the notebook into normal operation. Instead, you must enter the proper security password after pushing the Power/Suspend/Resume button. Low Battery Operations If your LifeBook notebook has low battery, pushing the Power/Suspend/Resume button only turns on the Secu-
rity Indicator. Your notebook does not unlock, the Secu-
rity Indicator turns off after one minute. To resume normal operation, first attach a power supply to the notebook. Then you may unlock the notebook. UNINSTALLING THE SECURITY PANEL APPLICATION You have two options when uninstalling the security panel application:
n Uninstall the security panel application software. This will disable all security feature. n Uninstall the security panel application with password still active. This will not allow any changes to the password. Uninstalling the Security Panel Application Software Remove passwords when User wants no password protection whatsoever and doesnt want to give anybody the utility to set a password on their computer. In this case, if passwords (supervisor, user, or both) are set, the passwords must first be cleared BEFORE removing the application. To clear passwords, follow same procedure in SETTING PASSWORD CODES except this time, select REMOVE, enter current password then click Next. When asked to confirm select Yes. 21 E Series.book Page 22 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Removing Security Panel Application with Passwords Still Active Using this feature will not allow any changes to the password. Removing the applications does not remove the password. It simply removes the utility to change/add/remove passwords. To change your password you must reinstall the application. User:
1. Go to Start Menu, Click on Control Panel. 2. Open Add/Remove Programs Properties in the Control Panel. 3. Select the Security Panel Application in the list, and click Add/Remove. 4. When the Confirm File Deletion box appears, click Yes. Supervisor:
1. Go to Start Menu, Click on Control Panel. 2. Open Add/Remove Programs Properties in the Control Panel. 3. Select the Security Panel Application for Supervisor in the list, and click Add/Remove. 4. When the Confirm File Deletion box appears, click Yes. Reinstalling the Security/Application Panel To reinstall supervisor or user security application, you will need your Drivers and Applications CD. The Utilities/Security Application Panel folder contains two separate folders: Supervisor and User. The setup files for supervisor and user security applications are contained in those folders. 1. Go to the Utilities/Security Application Pane/
Supervisor folder on the CD and double-click the setups.exe file. The Installing Security Panel Appli-
cation window will appear. Follow the instructions on the screen. 2. Go to the Utilities/Security Application Panel/User folder on the CD and double-click the setup.exe file. The Installing Security Panel Application window will appear. Follow the instructions on the screen. Supervisor and user passwords can be set via Windows software using the FJSECS.exe and FJSECU.exe files, respectively. FJSECU.exe for the user password cannot run without first setting a supervisor password. You need to run FJSECS.exe first to set the supervisor pass-
word. Follow instructions under Setting Passwords on page 20. 22 If you forget both passwords, please contact Fujitsu Computer Systems Corporation Service and Support at 1-800-8FUJITSU (1-800-838-5487). Fujitsu Computer Systems Corporation charges a service fee for unlocking a password restricted LifeBook notebook. When calling please have a valid credit card and provide proof of ownership. You will then be given instructions on where to ship your notebook. LAUNCHING APPLICATIONS WITH THE SECURITY/APPLICATION PANEL The security panel also enables you to launch applications with the touch of a button when your system is on. Pressing any of the buttons will launch a user-defined application. Your notebook is pre-installed with software utilities that let you operate and configure your LifeBook Security /Application Panel. These utilities are found in the Start menu, under Settings -> Control Panel ->
Application Panel. (For Windows XP users, go to Start ->
Control Panel -> Other Control Panel Settings ->
Application Panel. They include two Application Panel Setup tabs, E-mail Setup, and Internet Setup. Configuring your LifeBook Application Panel When you start Windows, the LifeBook Application Panel is automatically activated. An icon resembling a finger pressing a button will appear on the system tray
(the indented portion of the status bar where the clock is displayed). When you see this icon you will know that LifeBook Application Panel is active. As an application launcher, the LifeBook Application Panel is very flexible, giving you a variety of options. To set up the Panel to best suit your needs, we have provided the Application Panel Setup utility that quickly and easily helps you make the most of this valuable feature. To configure your LifeBook Application Panel with Application Panel Setup:
1. Click on Start. 2. Click on Programs. 3. Click on LifeBook Application Panel. 4. Click on Application Panel Setup. The Application Panel Setup utility will appear. There are tabs that correspond to the application buttons on the LifeBook Application Panel. When you receive your notebook, these buttons are pre-configured to launch specific programs, as referenced in Chapter 7 of this document. The tabs in Application Panel Setup may not be in the same order as the buttons on your LifeBook notebook, please select the tab you wish to change carefully. G e t t i n g t o K n o w Y o u r L i f e B o o k Deactivating and Activating the LifeBook Application Panel To deactivate the LifeBook Application Panel, follow these easy steps:
1. Click on Start. 2. Click on Programs. 3. Click on LifeBook Application Panel. 4. Click on Deactivate Panel. To reactivate, follow the same procedure, except for step 4. Click on Activate Panel instead. Every time you start Windows the LifeBook Application Panel is activated, even if you deactivated it before you shut down. E Series.book Page 23 Wednesday, April 14, 2004 10:28 AM To change an application associated with the Application buttons, click on the tab for the button you would like to reconfigure for example, Application A. Click on Browse from Start Menu, scroll down the list of applica-
tions, click on the application you wish to launch with this button, and then click OK. The button will now launch the new application. The Internet tab is different. It comes set to launch your Windows default Internet browser (Internet Explorer), unless you have changed this in Windows. In order to reconfigure it to launch another program follow these easy steps:
1. Click on Other from the Internet browser box. 2. Click on Browse from Start Menu. 3. Scroll down the list of applications, and then click on the application you wish to launch with this button. 4. Click OK. The button will now launch the new application. If you want to return to launching your Windows default Internet browser with this button, you need only click on Default Internet Browser from the Internet browser box. Be aware that you will erase the settings for the other application. If you wish to go back to launching the other application from this button, you will need to reconfigure it as described above. If your system has dedicated one of the application launcher buttons to be an Internet launcher, the button can still be configured to launch any application you wish, not just an Internet browser. When you have finished with Application Panel Setup click OK, and the new settings will take effect. You can reconfigure your LifeBook Application Panel as often as you like. 23 E Series.book Page 24 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k 24 E Series.book Page 25 Wednesday, April 14, 2004 10:28 AM 3 Getting Started 25 E Series.book Page 26 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k 26 E Series.book Page 27 Wednesday, April 14, 2004 10:28 AM DC Output Cable DC Power Jack G e t t i n g S t a r t e d AC Adapter AC Cable Figure 3-1 Connecting the AC Adapter Power Sources Your Fujitsu LifeBook notebook has three possible power sources: a primary Lithium ion battery, an AC adapter or an optional Auto/Airline adapter. CONNECTING THE POWER ADAPTERS The AC adapter or optional Auto/Airline adapter provides power for operating your notebook and charging the batteries. Connecting the AC Adapter 1. Plug the DC output cable into the DC power jack of your LifeBook notebook. 2. Plug the AC adapter into an AC electrical outlet.
(Figure 3-1) Connecting the Optional Auto/Airline Adapter 1. Plug the DC output cable into the DC power jack on your notebook. 2. Plug the Auto/Airline adapter into the cigarette lighter of an automobile with the ignition key in the On or Accessories position. OR 3. Plug the Auto/Airline adapter into the DC power jack on an airplane seat. Switching from AC Adapter Power or the Auto/Airline Adapter to Battery Power 1. Be sure that you have at least one charged battery installed. 2. Remove the AC adapter or the Auto/Airline adapter. The Lithium ion battery is not charged upon purchase. Initially, you will need to connect either the AC adapter or the Auto/Airline adapter to use your notebook. 27 E Series.book Page 28 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Display Panel Latch Figure 3-2 Opening the Display Panel Display Panel Your Fujitsu LifeBook notebook contains a display panel that is backlit for easier viewing in bright environments and maintains top resolution through the use of active-
matrix technology. OPENING THE DISPLAY PANEL 1. Press the Display Panel latch. This releases the locking mechanism and raises the display slightly. 2. Lift the display backwards, being careful not to touch the screen, until it is at a comfortable viewing angle. (Figure 3-2) ADJUSTING DISPLAY PANEL BRIGHTNESS Once you have turned on your LifeBook notebook, you may want to adjust the brightness level of the screen to a more comfortable viewing level. There are two ways to adjust the brightness, by using the keyboard or the power management utility. Using the Keyboard Adjusting the brightness using the keyboard changes the setting only temporarily.
[Fn+F6]: Pressing repeatedly will lower the brightness of your display.
[Fn+F7]: Pressing repeatedly will increase the brightness of the display. When using AC power your brightness setting is set to its highest level by default. When using battery power your brightness setting is set to approximately mid-level by default. The higher the brightness level, the more power the notebook will consume and the faster your batteries will dis-
charge. For maximum battery life, make sure that the brightness is set as low as possible. CLOSING THE DISPLAY PANEL 1. Holding the edge of your display panel, pull it forward until it is flush with the body of your Life-
Book notebook. 2. Push down until you hear a click. This will engage the locking mechanism and prevent your display panel from opening unexpectedly. 28 E Series.book Page 29 Wednesday, April 14, 2004 10:28 AM Starting Your LifeBook Notebook POWER ON Power/Suspend/Resume Button The Power/Suspend/Resume button is used to turn on your LifeBook notebook from its off state. Once you have connected your AC adapter or charged the internal Lithium ion battery, you can power on your LifeBook notebook. (See figure 2-3 on page 6 for location) When you turn on your LifeBook notebook be sure you have a power source. This means that at least one battery is installed and charged, or that the AC or Auto/Airline adapter is connected and has power. To turn on your LifeBook notebook from its off state, press the Power/Suspend/Resume button, located above the keyboard. When you are done working you can either leave your LifeBook notebook in Suspend mode,
(See Suspend Mode on page 32 for more information), or you can turn it off (See Power Off on page 33 for more information). Do not carry your LifeBook notebook around with the power on or subject it to shocks or vibration, as you risk damaging your notebook. When you power on your LifeBook, it will perform a Power On Self Test (POST) to check the internal parts and configuration for correct functionality. If a fault is found, your LifeBook notebook will emit an audio warning and/
or an error message will be displayed. (See Power On Self Test Messages on page 64 for more information) Depending on the nature of the problem, you may be able to continue by starting the operating system or by entering the BIOS setup utility and revising the settings. After satisfactory completion of the Power On Self Test
(POST), your notebook will load your operating system. Never turn off your LifeBook notebook during the Power On Self Test (POST) or it will cause an error message to be displayed when you turn your LifeBook notebook on the next time. (See Power On Self Test Messages on page 64 for more information) G e t t i n g S t a r t e d BOOT SEQUENCE The procedure for starting up your notebook is called the Bootup sequence and involves your notebooks BIOS. When your LifeBook notebook is first turned on, the main system memory is empty, and it needs to find instructions to start up your notebook. This information is in the BIOS program. Each time you power up or restart your notebook, it goes through a boot sequence which displays a Fujitsu logo until your operating system is loaded. During booting, your notebook is performing a standard boot sequence including a Power On Self Test
(POST). If the sequence is completed without a failure and without a request for the BIOS Setup Utility, the system displays the operating systems opening screen. The boot sequence is executed when:
You turn on the power to your LifeBook notebook. You restart your notebook from the Windows Shut Down dialog box. The software initiates a system restart. Example:
When you install a new application. You reset the system by pressing [CTRL+ALT+DEL]. BIOS SETUP UTILITY The BIOS Setup Utility is a program that sets up the operating environment for your LifeBook notebook. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS environment to operate your notebook. The BIOS Setup Utility configures:
Device control feature parameters, such as changing I/O addresses and boot devices. System Data Security feature parameters, such as passwords. Entering the BIOS Setup Utility To enter the BIOS Setup Utility do the following:
1. Turn on or restart your LifeBook notebook. 2. Press the [F2] key once the Fujitsu logo appears on the screen. This will open the main menu of the BIOS Setup Utility with the current settings displayed. 3. Press the [RIGHT ARROW] or [LEFT ARROW] key to scroll through the other setup menus to review or alter the current settings. BIOS Guide A guide to your notebooks BIOS is available online. Please visit our service and support Web site at us.fujitsu.com/computers. Once there, select Support, then select Notebooks under Users Guides. Select Life-
Book BIOS Guides from the pull-down menu for your LifeBook series. If you are unsure of your notebooks BIOS number, refer to your packing slip. 29 E Series.book Page 30 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k If your data security settings require it, you may be asked for a password before the BIOS main menu will appear. BOOTING THE SYSTEM We strongly recommend that you do not attach any external devices and do not put a DVD/CD in any drive until you have gone through the initial power on sequence. When you turn on your LifeBook notebook for the first time, it will display a Fujitsu logo on the screen. If you do nothing the system will load the operating system, and then the Windows Welcome will begin. Designed to accommodate the needs of users in many different countries, Windows needs to be configured the first time you use it. Windows has three parts:
Getting Started: You have the opportunity to enter custom information for your configuration file and setup your modem so that your LifeBook notebook will be prepared to dial out. Registration: Easy online registration for Windows with Microsoft, and for your LifeBook notebook with Fujitsu. Windows License Agreement and Final Settings:
You have the opportunity to review the Windows. Getting Started Read the instructions on the screens carefully and fill in the information as directed. You will be asked for such items as the language you wish to use, the country in which you live, your first and last name, and about how you dial out from where you will be using your note-
book. For the modem settings, enter your current location information where you will be using your LifeBook notebook. If you are not connected to a phone line and plan to register at a later time, you may click the Skip button, and you will go directly to the condition of use page. Make sure you have connected a phone line to your modem before you use E-
Registration. Once you have set up your notebook to dial out, Windows will make a free telephone call which will test these settings. If the call is unsuccessful, you will be returned to the phone settings page where you may try to fix them. If you are unable to fix the settings please contact Fujitsu Service and Support. (See Fujitsu Contact Information on page 1 for more information) If you would 30 simply like to move on, and register at a later time, you may click the Skip button, and you will go directly to the Condition of Use page. Registration If your connection is successful, you will go to the Registration Confirmation page. On this page simply enter the requested information, and then check the box at the bottom to register your copy of Windows with Microsoft. Once you have finished, click the Next button to continue. If you do not register at this time you can do it later simply by double-clicking on the LifeBook Registration icon on your desktop and following the instructions. You will then go through the Fujitsu registration process. Follow the instructions on the screens, and enter all of the necessary information. Be as specific as possible so that if you need help the service and support team will be able to serve you better. Final Settings The first part of your final settings is the Windows End User License Agreement. Read the agreement carefully. When you finish reading you must accept or reject the terms of the agreement and then click on the Next button. If you reject the terms of the license agreement you will be asked to review the license agreement for information on returning to Windows or to shut down your LifeBook notebook. WINDOWS PRODUCT ACTIVATION
(WINDOWS XP ONLY) If your system has Windows XP as an operating system, it has already been pre-installed and pre-activated when you receive the system. In the event you need to re-install Windows XP (e.g., after making significant configuration changes), it may be necessary to reactivate the operating system. To do so, use the following information. After re-installing Windows XP, you have thirty days to activate it. Product activation ensures that you are the authorized owner of the Windows XP operating sys-
tem. Until you activate the product, you will be prompted whenever you turn on the system that activation is required. Follow the on-screen directions to activate your operating system. The product only needs to be G e t t i n g S t a r t e d E Series.book Page 31 Wednesday, April 14, 2004 10:28 AM activated once, unless significant hardware changes are made to your system. Note that Product Activation and Registration are not the same thing. Registration is optional, whereas Prod-
uct Activation is a required procedure. REGISTERING YOUR LIFEBOOK NOTEBOOK How do I register?
To register, visit our Web site at:
us.fujitsu.com/computers INSTALLING CLICK ME!
The first time you boot up your system, you will see an icon called Click Me! in the Start menu. When you click the Click Me! icon, your system will automatically build the icon tray in the bottom right of the screen. These icons provide links to utilities that you will frequently access. Click Me! will install additional system utilities to maxi-
mize the performance of your system. 31 E Series.book Page 32 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Power Management Your Fujitsu LifeBook notebook has many options and features for conserving battery power. Some of these features are automatic and need no user intervention, such as those for the internal modem. However, others depend on the parameters you set to best suit your oper-
ating conditions, such as those for the display bright-
ness. Internal power management for your notebook may be controlled from settings made in your operating system, pre-bundled power management application, or from settings made in BIOS setup utility. Besides the options available for conserving battery power, there are also some things that you can do to prevent your battery from running down as quickly. For example, you can create an appropriate power saving profile, put your notebook into Suspend mode when it is not performing an operation, and you can limit the use of high power devices. As with all mobile, battery powered computers, there is a trade-off between performance and power savings. POWER/SUSPEND/RESUME BUTTON When your LifeBook notebook is active, the Power/
Suspend/Resume button can be used to manually put your notebook into Suspend mode. Push the Power/
Suspend/Resume button when your notebook is active, but not actively accessing anything, and immediately release the button. You will hear two short beeps and your system will enter Suspend mode. (See figure 2-3 on page 6 for location) If your LifeBook is suspended, pushing the Power/
Suspend/Resume button returns your notebook to active operation. You can tell whether the system is Suspended by looking at the Power indicator. (See figure 2-3 on page 6) If the indicator is visible and not flashing, your notebook is fully operational. If the indicator is visible and flashing, your notebook is in Suspend mode. If the indicator is not visible, the power is off or your notebook is in Hibernation mode. (See Hibernation Feature) SUSPEND MODE Suspend or Standby mode in Windows saves the contents of your LifeBook notebooks system memory during periods of inactivity by maintaining power to critical parts. This mode will turn off the CPU, the display, the hard drive, and all of the other internal components except those necessary to maintain system memory and allow for restarting. Your notebook can be put in Suspend mode by:
Pressing the Power/Suspend/Resume button when your system is turned on. Selecting Standby from the Windows Shut Down menu. Timing out from lack of activity. 32 Allowing the battery to reach the Dead Battery Warning condition. Your notebooks system memory typically stores the file on which you are working, open application informa-
tion, and any other data required to support operations in progress. When you resume operation from Suspend mode, your notebook will return to the point where it left off. You must use the Power/Suspend/Resume button to resume operation, and there must be an adequate power source available, or your notebook will not resume. If you are running your LifeBook note-
book on battery power, be aware that the battery continues to discharge while your notebook is in Suspend mode, though not as fast as when fully opera-
tional. Disabling the Power/Suspend/Resume button prevents it from being used to put your LifeBook notebook in Suspend or Hibernation (Save-to-Disk) mode. The resume function of the button can-
not be disabled. The Suspend or Hibernation (Save-to-
Disk) mode should not be used with cer-
tain PC Cards. Check your PC Card doc-
umentation for more information. When PC Cards or external devices are in use, Hibernation (Save-to-Disk) mode cannot return to the exact state prior to suspen-
sion, because all of the peripheral devices will be re-initialized when the system restarts. If your LifeBook notebook is actively accessing information when you enter the Suspend or Hibernation (Save-to-
Disk) mode, changes to open files are not lost. The files are left open and memory is kept active during Suspend mode or the memory is transferred to the internal hard drive during Hiberna-
tion mode. The main advantage of using the Hibernation (Save-to-Disk) function is that power is not required to maintain your data. This is particularly important if you will be leaving your LifeBook notebook in a suspended state for a prolonged period of time. The drawback of using Hibernation mode is that it lengthens the power down and power up sequences and resets peripheral devices.
1 2 | users manual 2 | Users Manual | 1.51 MiB |
FCC ID: EJE-WB0031 (IC: 337J-WB0031) Report No. M050534_Cert_WM3B2200BG_BT APPENDIX H USER MANUAL (PART 2) This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au E Series.book Page 33 Wednesday, April 14, 2004 10:28 AM HIBERNATION (SAVE-TO-DISK) FEATURE The Hibernation feature saves the contents of your LifeBook notebooks system memory to the hard drive as a part of the Suspend/Resume mode. You can enable or disable this feature. Enable or Disable the Hibernation Feature The default settings is not enabled. To enable or disable the Hibernation feature follow these easy steps:
1. From the Start menu, select Settings, and then select Control Panel. 2. From the Control Panel select Power Options. 3. Select the Hibernation tab. Select the box to enable or disable this feature. Using the Hibernation Feature 1. From the Start menu, select Settings, and then select Control Panel. 2. From the Control Panel select Power Options. 3. Select the Advanced tab. Select Hibernate from the pull down menu for Power buttons. DISPLAY TIMEOUT The Video Timeout is one of the power management parameters. This feature saves power by turning off the display if there is no keyboard or pointer activity for the user selected timeout period. Any keyboard or pointer activity will cause the display to restart automatically. This feature is independent of the Power/Suspend/
Resume button and can be enabled and disabled in Windows and BIOS setup utility. (See BIOS Setup Utility on page 29 for more information) HARD DISK TIMEOUT The Hard Disk Timeout is another one of the power management parameters. This feature saves power by turning off the hard drive if there is no hard drive activity for the user selected timeout period. Any attempt to access the hard drive will cause it to restart automatically. This feature is independent of the Power/
Suspend/Resume button and can be enabled and disabled in Windows and BIOS setup utility. (See BIOS Setup Utility on page 29 for more information) WINDOWS POWER MANAGEMENT Power Management The Power Management icon located in the Windows Control Panel allows you to configure some power management settings. For example, you can use Power Management to set the timeout values for turning off the display and hard disks whether you are running the notebook on battery power or one of the adapters. The settings may also be changed in the BIOS. (See BIOS Setup Utility on page 29 for more information) G e t t i n g S t a r t e d RESTARTING THE SYSTEM If your system is on and you need to restart it, be sure that you use the following procedure. 1. Click the Start button, and then click Shut Down. 2. Select the Restart option from within the Windows Shut Down dialog box. 3. Click OK to restart your notebook. Your notebook will shut down and then reboot. Turning off your notebook without exiting Windows, or turning it on within 10 seconds of being shut off may cause an error when you start the next time. POWER OFF Before turning off the power, check that the Hard Drive, optical drive, PC Card, and Floppy Disk indicators are all Off. (See figure 2-3 on page 6). If you power-off while accessing a disk or PC Card there is a risk of data loss. To ensure that the notebook shuts down without error, use the Windows shutdown procedure. Be sure to close all files, exit all applications, and shut down your operating system prior to turning off the power. If files are open when you turn the power off, you will lose any changes that have not been saved, and may cause disk errors. Using the correct procedure to shut down from Windows allows your notebook to complete its operations and turn off power in the proper sequence to avoid errors. The proper sequence is:
1. Click the Start button, and then click Shut Down or Turn Off Computer. 2. Select the Shut Down option from within the Windows Shut Down dialog box. 3. Click OK to shut down your notebook. If you are going to store your notebook for a month or more see Care and Maintenance Section. 33 E Series.book Page 34 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k 34 E Series.book Page 35 Wednesday, April 14, 2004 10:28 AM 4 User-Installable Features 35 E Series.book Page 36 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k 36 E Series.book Page 37 Wednesday, April 14, 2004 10:28 AM Lithium ion Battery Your LifeBook notebook has a Lithium ion battery that provides power for operating your notebook when no external power source is available. The battery is durable and long lasting, but should not be exposed to extreme temperatures, high voltages, chemicals or other hazards. The Lithium ion battery operating time may become shorter if it is used under the following conditions:
When used at temperatures that exceeds a low of 5C or a high of 35C. Extreme temperatures not only reduce charging efficiency, but can also cause battery deterioration. The Charging icon on the Status Indi-
cator panel will flash when you try to charge a battery that is outside its operating temperature range.
(See Battery Charging Indicators on page 12 for more information) When using a high current device such as a modem, Super-Multi DVD drive, CD-ROM drive, DVD/CD-
RW combo drive, or the hard drive, using the AC adapter will conserve your battery life. Do not leave a faulty battery in your LifeBook notebook. It may damage your AC adapter, optional Auto/Airline adapter, another battery or your notebook itself. It may also prevent operation of your notebook by draining all available current into the bad battery. Actual battery life will vary based on screen brightness, applications, fea-
tures, power management settings, bat-
tery condition and other customer preferences. CD-ROM drive, Super-
Multi DVD drive, DVD/CD-RW drive combo, or hard drive usage may also have a significant impact on battery life. The battery charging capacity is reduced as the battery ages. If your battery is running low quickly, you should replace it with a new one. Under federal, state, or local law it may be illegal to dispose of batteries by put-
ting them in the trash. Please take care of our environment and dispose of bat-
teries properly. Check with your local government authority for details regard-
ing recycling or disposing of old batter-
ies. If you cannot find this information elsewhere, contact your support repre-
sentative at 1-800-8FUJITSU (1-800-
838-5487) U s e r I n s t a l l a b l e F e a t u r e s RECHARGING THE BATTERIES If you want to know the condition of the primary Lithium ion battery, check the Battery Level indicator located on the Status Indicator panel. The indicator changes as the battery level changes. The Lithium ion battery is recharged internally using the AC adapter or Auto/Airline adapter. To recharge the battery make sure the battery that needs to be charged is installed in your LifeBook notebook and connect the AC or Auto/Airline adapter. Make sure that the Battery Charging indicator and the percentage charge is shown inside the Battery Level icon on the Status Indicator Panel. There is no memory effect on the Lithium ion battery therefore you do not need to discharge the battery completely before recharging. The charge times will be significantly longer if your notebook is in use while the battery is charging. If you want to charge the battery more quickly, put your notebook into Suspend mode, or turn it off while the adapter is charging the battery.
(See Power Management on page 32 for more information on Suspend mode and shutdown procedure) Using heavy current devices such as Modem or frequent DVD/CD-RW/CD-
ROM accesses may prevent charging completely. Low Battery State When the battery is running low, a low battery notifica-
tion message will appear. If you do not respond to the low battery message, the batteries will continue to discharge until they are too low to operate. When this happens, your notebook will go into Suspend mode. There is no guarantee that your data will be saved once the notebook reaches this point. Once the low battery notification mes-
sage appears, you need to save all your active data and put your LifeBook note-
book into Suspend mode until you can provide a new power source. You should provide a charged battery, an AC power adapter, or Auto/Airline adapter as soon as possible. When you are in Suspend mode there must always be at least one power source active. If you remove all power sources while your LifeBook notebook is in Suspend mode, any data that has not been saved to the hard drive will be lost. 37 Hot-swapping Batteries To hot-swap batteries in your battery bay follow these easy steps: (Figure 4-1) Be sure to plug in an AC Adapter prior to removing the battery. There is no bridge battery present to support the system while the battery is being replaced. If you do not use an AC Adapter you will lose any unsaved files. 1. Plug an AC Adapter into the system and connect it to a power outlet. Latch Release Battery Bay Release Latch Battery Pack Lift Slot Figure 4-1. Removing a Battery 2. Follow steps 3 through 5 in Cold Swapping Batteries. If the Lithium ion battery connector is not fully seated, you may not be able to use your notebook or charge your battery. E Series.book Page 38 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Dead Battery Suspend mode shows on the Status indi-
cator just like the normal Suspend mode. Once your notebook goes into Dead Battery Suspend mode you will be unable to resume operation until you provide a source of power either from an adapter, or a charged battery. Once you have provided power, you will need to press the Power/Suspend/Resume button to resume operation. In the Dead Battery Suspend mode, your data can be maintained for some time, but if a power source is not provided promptly, the Power indicator will stop flashing and go out, meaning that you have lost the data that was not stored. Once you provide power, you can continue to use your notebook while an adapter is charging the battery. Shorted Batteries The Status Indicator panel uses a symbol inside the battery outline of the Battery Level indicator to display the operating level available in that battery. (See figure 2-
9 on page 11) If this display shows a Shorted Battery, it means the battery is damaged and must be replaced so it does not damage other parts of your LifeBook notebook. REPLACING THE BATTERY With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not charged. There are two ways to swap batteries, cold-
swapping and hot-swapping:
Cold-swapping Batteries To cold-swap batteries in your battery bay follow these easy steps: (Figure 4-1) 1. Have a charged battery ready to install. 2. Shut down your notebook and disconnect the AC adapter. 3. Unlock the battery bay release latch by pushing the latch release away from the battery pack and sliding the battery bay release latch towards the latch release
(Figure 4-1). 4. Continue to press the latch release button away from the battery pack, and lift the battery out of the bay by inserting a thumbnail under the edge of the battery at the lift slot. 5. Slide a new battery into the bay. 6. Slide the battery bay release latch back to its original position to lock the battery into place. 8. Plug in the AC adapter and turn the power on. 38 E Series.book Page 39 Wednesday, April 14, 2004 10:28 AM U s e r I n s t a l l a b l e F e a t u r e s Media Eject Button Media Holder Tray Figure 4-2. Optical Drive Optical Drive There is a variety of media available to use with your system, depending upon the system configuration you have selected. Super-Multi DVD drives, DVD/CD-RW Combo drives, and CD-ROM drives are collectively known as optical drives. A CD-R or DVD-R disc can only be written to once;
CD-RW or DVD-RW discs can be written to over and over. CD-R and CD-RW discs hold up to 700MB of data. DVD-R and DVD-RW discs hold up to 4.7 GB of data. Depending upon the configuration of your LifeBook notebook, you may have one of the following drives:
Super-Multi DVD: The Super-Multi DVD drive com-
bines seven recordable formats in a single drive (DVD-
R, DVD+R, DVD-RW, DVD+RW, DVD-RAM, CD-R, and CD-RW), making it the most versatile drive to date. DVD/CD-RW combo: A DVD/CD-RW combo drive allows you to access movie, software, data, or audio DVD/CDs, and to write data onto recordable CD-R and CD-RW discs. CD-ROM: A CD-ROM drive allows you to access soft-
ware, data, or audio CDs. Install your media player software before first using the DVD, DVD/CD-RW, or CD-
ROM media drives. Refer to the applicable readme file on the Driver Applications CD-
ROM. MEDIA PLAYER SOFTWARE Super-Multi DVD model only: With the Super-Multi DVD drive and media player software you can play DVD movies and music CDs on your LifeBook notebook. The media player includes controls which allow you to take full advantage of the features of a DVD movie, as well as standard features such as fast forward, fast reverse, pause, etc. With this drive you can also burn onto recordable DVD-R/RW, DVD+R/RW, or CD-R/RW discs. DVD/CD-RW Combo model only: With the combo drive, you can play DVD movies, read audio CDs, and write data onto recordable CD-R or CD-RW discs. CD-ROM model only: With the CD-ROM drive, you can read software, audio, or data CD discs. Do not operate your optical drive unless your LifeBook notebook is sitting on a flat surface. Using a drive when the system is not level may damage the drive or prevent proper operation. Prolonged use of the optical drive, such as watching a DVD movie, will substantially reduce your battery life if no other power source is attached. LOADING MEDIA ON YOUR DRIVE To load a disc into your optical drive:
1. Push and release the eject button on the front of the optical drive to open the holder tray. The tray will come out of the LifeBook notebook a short distance. 2. Gently pull the tray out until a media disc can easily be placed in the tray. There may be a protective sheet in the tray from when it was shipped; please make sure it is removed before operating the drive. 39 E Series.book Page 40 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k You should periodically check the Fujitsu web site at us.fujitsu.com/
computers for current updated drivers. All LifeBook DVD players are set to play DVD titles with region code number 1 which is specified for the North American market. The region number is a regional restriction code defined by the DVD Forum acting on Hollywood requirements. Different region codes are recorded on video DVD titles for publication in different areas of the world. If the regional code of the DVD player does not match the regional codes on the titles, then play-
back is impossible. You can change the region code on the DVD player using the Properties menu of the DVD software. Note, however, that you can only change the region code up to four times. After the fourth change, the last region code entered becomes perma-
nent, and cannot be changed. 3. Place the media into the tray, label side up, with the hole in the center of the disc. Snap the disc onto the raised circle in the center of the tray. 4. Gently push the holder tray back in until you hear a click. (Figure 4-3) If you have disabled the Auto Insert Notification Function, you will have to start the drive from your desktop, since your LifeBook notebook will not automatically recognize that media has been loaded.
(b)
(d) Figure 4-3. Loading/Ejecting Media
(a)
(c) 40 REMOVING MEDIA 1. Push and release the eject button on the front of the optical drive. This will stop the drive and the holder tray will come out of the LifeBook notebook a short distance. 2. Gently pull the tray out until the disc can easily be removed from the tray. 3. Carefully remove the media disc from the holder tray. 4. Gently push the holder tray back in until you hear a click. USING THE MEDIA PLAYER SOFTWARE Depending upon its configuration, your system may not have the media player software pre-installed. If it is not installed, reference the documentation that accompanies the media application. Starting a DVD Movie (DVD Models only) 1. Insert the DVD movie into the optical drive of your notebook. If the CD AutoRun feature activates, skip Step 2. 2. The first time you insert a movie into the DVD/CD-
RW tray, you will be prompted to select what you want the system to do when discs are inserted (e.g., start automatically or wait for a prompt). Until you make a selection, you will receive the same prompt whenever you insert a disc. 3. Click OK to close the About DVD Player Performance dialog box and the movie will begin. Opening the Media Player Control Panel With most DVD-ROMs, you have the option of altering how the movie should play and what you wish to view. You can do this by using the media player control panel and the mouse. 1. Right-click on the movie screen to open a dropdown menu for options. 2. Select View, then Player for all the controls available. This will open the control panel into the bottom of the screen. Using the Media Player Control Panel The media player software allows you to watch the movie much like a VCR player. You can pause, rewind, fast-forward and stop the movie at any point. 1. To Pause the movie, click the on-screen button. 2. To Rewind the movie, click the button to rewind to a specific portion of the movie, or the button to return to the opening screen. E Series.book Page 41 Wednesday, April 14, 2004 10:28 AM 3. To Fast-forward the movie, click the button to forward to a specific portion of the movie, or the button to jump to the ending credits. 4. To Stop the movie, click the button. Exiting the Media Player 1. Click the located in the upper right corner of the title bar. This will open a media player dialog box. 2. Click Yes to stop and exit the movie, or No to close the media player dialog box and return to the movie. USING DOLBY HEADPHONE The Dolby Headphone utility lets you enjoy multi-
channel sound sources with realistic surround sound using your conventional stereo headphones. Dolby Headphone is a signal processing system that enables your stereo headphones to realistically portray the sound of a five-speaker playback system. U s e r I n s t a l l a b l e F e a t u r e s an additional, charged battery or attach AC power during the movie to view it in its entirety. Prolonged use of the optical drive, such as watching a DVD movie, will greatly reduce your notebooks battery life. Many movie run-times are longer than your system can support on a single battery. If you are watching a DVD movie on battery power you may need to swap in an additional, charged battery or attach AC power during the movie to view it in its entirety. An additional fully-charged battery is highly recommended if you will be watching DVD movies on battery power. If you dont have an additional battery, you may purchase one either online at us.fujitsu.com/computers or by calling 1-877-372-3473. Media discs which do not have the Dolby Surround 5:1 symbol will not support Dolby Headphone. After making changes to the Dolby Headphone feature and clicking OK, wait at least ten seconds before making another change in order to allow the system to stabilize. To Watch a Movie on Battery Power:
1. Have an additional full-charged battery or your AC adapter ready for use. 2. Start watching your DVD movie. 3. When the low battery warning occurs, immediately stop the movie and exit the media player. To use the Dolby Headphone feature, perform the following steps:
1. Insert the disc in the media player tray. When you do so, WinDVD will start automatically. 2. Click on the Fujitsu logo on the WinDVD control panel. If the disc supports Dolby Surround 5.1, a drop down menu appears. 3. Verify that Dolby headphones is checked on the menu. If you do not want it active, select Disable. USING MEDIA PLAYER ON BATTERY POWER Since optical drives consume a lot of power, your overall battery life will be significantly shorter when operating the optical drive continuously (such as watching a DVD movie) than during standard operation. Many movies run-times are longer than your LifeBook notebook can support on a single charged battery. If you are watching a DVD movie on battery power you may need to swap in If you do not stop the media player quickly and the LifeBook notebook attempts to auto-suspend (critical battery low state) the LifeBook notebook will shut down improperly. If this occurs, you will need to perform a hard reset and follow the instruction, if any, presented to you before the system will reboot. 4. Power down your LifeBook notebook and replace the discharged battery with an additional fully-
charged battery. If you do not have an additional battery, you may attach AC power as soon as you see the low battery warning. 5. Resume your LifeBook notebook by pressing the Suspend button again. This is not required if you attached AC power without entering suspend mode. 6. Restart your media player, locate and skip to the chapter of the movie you were last watching. 7. Continue watching your DVD movie. Some shorter DVD movies may not require you to swap batteries or attach AC power to complete them. However, it is best to be prepared since actual battery life while operating the optical drive cannot be guaranteed. 41 E Series.book Page 42 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Eject Button Figure 4-4.Loading/Ejecting a 3.5 Floppy Disk External USB Floppy Disk Drive An external USB floppy disk drive is available as an option for your LifeBook notebook. The external floppy disk drive can read and write information on removable 1.44MB and 720KB floppy disks. Your LifeBook notebook is preconfigured to boot from a USB floppy drive. Refer-
ence the BIOS manual for further informa-
tion on changing the default boot drive. The BIOS manual can be found on the Fujitsu Computer Systems web site:
us.fujitsu.com/computers, under Support. LOADING A DISK To load a disk into your disk drive, follow these easy steps:
1. Orient the disk so that its label is facing upwards and the shutter side is pointing towards the drive.
(Figure 4-4) 2. Push the disk into the drive until the Eject button pops out and you hear a click. When there is no disk in the drive, the Eject button is flush with your notebook. EJECTING A DISK To eject a disk from the disk drive, follow these easy steps:
1. Check that the Floppy Disk Drive Access indicator is inactive. 2. Press the Eject button. This will push your disk partially out of the drive. 3. Remove the disk. 42 If you eject the disk while the Floppy Disk Drive Access indicator is active, there is a risk of damaging the data on the disk, the disk itself or even the disk drive. PREPARING A DISK FOR USE Before you can use a new disk, it needs to be prepared so your LifeBook notebook knows where to store infor-
mation. This preparation is called formatting or initial-
izing a disk. You will need to format new disks, unless they are preformatted. (Please refer to your operating system manual for step-by-step instructions on formatting a disk) To prevent accidental erasure of the data stored on a disk, slide the write protect tab until a small hole is exposed. This sets the disk into a protected state where nothing can be added or removed. If you want to add or remove data on a protected disk, slide the write protect tab to close the small hole. (Figure 4-5) Write Enabled Write Protected Figure 4-5. Floppy Disk Write Protect Formatting a floppy disk that already con-
tains data will erase all of the information on the disk. E Series.book Page 43 Wednesday, April 14, 2004 10:28 AM U s e r I n s t a l l a b l e F e a t u r e s PC Card Slots PC Card Eject Button Figure 4-6. Installing/Removing PC Cards PC Cards Your Fujitsu LifeBook notebook supports two Type I or Type II PC Cards or one Type III PC Card, which can perform a variety of functions. Some available PC Cards:
4-in-1 media card adapter Compact Flash media card adapter Fax/data modem cards Local area network (LAN) cards IDE solid-state disk cards SCSI cards Smart Card holder Other PC Cards that conform to PCMCIA 2.1 or CardBus standards For further information, refer to the instructions supplied with your PC Card. INSTALLING PC CARDS PC Cards are installed in the PC Card slot. To install a PC Card, follow these easy steps: (Figure 4-6) Installing or removing a PC Card during your LifeBook notebooks shutdown or bootup process may damage the card and/or your notebook. Do not insert a PC Card into a slot if there is water or any other substance on the card as you may permanently dam-
age the card, your LifeBook notebook, or both. Be sure to orient the card properly before inserting it. Failure to do so could result in damage to the card socket. 1. See your PC Card manual for specific instructions on the installation of your card. Some PC Cards may require your notebook to be Off while installing them. 2. Make sure there is no PC Card currently in the slot. If there is, see Removing PC Cards. 3. Insert your PC Card into the slot, with the product label facing up. 4. Push the card into the slot firmly until it is seated in the opening. You will hear a click and the Eject button will pop away from your notebook. 5. Flip the Eject button towards the rear of your notebook to lock the PC Card. REMOVING PC CARDS To remove a PC Card, follow these easy steps:
1. See your PC Card manual for specific instructions on removing your card. Some PC Cards may require your notebook to be in Suspend Mode or Off while removing them. If the dialog box states that the device cannot be removed, you must save all of your open files, close any open applica-
tions and shut down your notebook. 2. Flip the Eject button towards the front of your note-
book until it is fully extended, and then push it in until it is flush with the notebook. This will push the PC Card slightly out of the slot allowing you to remove the card. If the PC Card has an external connector and cable, do not pull the cable when removing the card. SMART CARD READER An embedded Smart Card Reader is provided on your LifeBook notebook. Smart Cards are the same size and shape as credit cards, but they contain an integrated microprocessor chip. The chip can hold a variety of different information, and provides the user with many possible options, such as allowing them to make secure purchases, pay for phone calls, store security informa-
tion, and provide personal identification and informa-
tion. 43 E Series.book Page 44 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k In order to use the embedded Smart Card Reader, you must purchase an optional Smart Card adapter and third-party software for installation into an available Type II PC Card slot. 44 E Series.book Page 45 Wednesday, April 14, 2004 10:28 AM Memory Upgrade Module Your Fujitsu LifeBook notebook comes with a minimum of 256 MB of high speed Double Data Rate Synchronous Dynamic RAM (DDR 333 SDRAM) factory installed. To increase your LifeBook notebooks memory capacity, you may install an additional memory upgrade module. The memory upgrade must be a dual-in-line (DIMM) SDRAM module. To ensure 100% compatibility, purchase the SDRAM module only from the Fujitsu web store at us.fujitsu.com/computers. Do not remove any screws from the memory upgrade module compartment except the ones specifically shown in the directions for installing and removing the memory upgrade module. The memory upgrade module can be severely damaged by electrostatic dis-
charge (ESD). Be sure you are properly grounded when handling and installing the module. INSTALLING MEMORY UPGRADE MODULES 1. Turn off power to your LifeBook notebook, remove any power adapter (AC or auto/airline), and remove the battery pack. 2. Make sure that all the connector covers are closed. 3. Turn the notebook bottom side up, and remove the screws of the memory upgrade module compart-
ment. (Figure 4-7) 4. Remove the cover. Figure 4-7. Opening the Memory Upgrade Compartment 5. Remove the memory upgrade module from the static guarded sleeve. 6. Align the memory upgrade module with the part side up. Align the connector edge of the memory upgrade module with the connector slot in the compartment. 7. Insert the memory upgrade module at a 45 angle. Press the connector edge of the module firmly down and into the connector until it lodges under the retaining clip. You will hear a click when it is prop-
erly in place. (Figure 4-8) U s e r I n s t a l l a b l e F e a t u r e s Figure 4-8. Installing a Second Memory Module 8. Replace the cover.(Figure 4-9) 9. Replace the screws. Figure 4-9. Replacing the Memory Compartment Cover The memory upgrade module is not something you routinely remove from your notebook. Once it is installed, you can leave it in place unless you want to change system memory capacity. TO REMOVE A MEMORY UPGRADE MODULE 1. Perform steps 1 through 4 of Installing a Memory Upgrade Module. 2. Pull the clips sideways away from each side of the memory upgrade module at the same time. 3. While holding the clips out, remove the module from the slot by lifting it up and pulling towards the rear of your notebook. (Figure 4-10) Figure 4-10. Removing a Memory Upgrade Module 4. Store the memory upgrade module in a static guarded sleeve. 5. Replace the cover. (Figure 4-9) 6. Replace the screws. 45 E Series.book Page 46 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k CHECKING THE MEMORY CAPACITY Once you have changed the system memory capacity by replacing the installed module with a larger one, be sure to check that your notebook has recognized the change. Check the memory capacity by clicking [Start] ->
Settings -> Control Panel, then double-clicking the System icon. Select the General tab and check the amount of memory under Computer:. There may be a variation between the actual memory size and what is displayed. This is due to the fact that your system uses a video graphics chip which dynami-
cally allocates system memory to accelerate graphics performance. Up to 64 MB of memory is dynamically shared on an as-needed basis using Dynamic Video Memory Technology (DVMT). If the total memory displayed is incorrect, check that your memory upgrade module is properly installed. (If the module is properly installed and the capacity is still not correctly recognized, see Trouble-
shooting on page 55. 46 E Series.book Page 47 Wednesday, April 14, 2004 10:28 AM U s e r I n s t a l l a b l e F e a t u r e s Power On/Suspend/Resume Button Anti-theft Lock Slot USB Ports PS/2 Port Parallel Port External Monitor Port DVI-D Port Serial Port LAN (RJ-45)Port Figure 4-11. Port Replicator back panel DC Power Jack Port Replicator An optional port replicator is available for your Fujitsu LifeBook notebook. The port replicator extends the functionality of your notebook by providing ports to connect PS/2 devices, a LAN (RJ-45) cable, USB devices, an external monitor, a parallel device, a digital video device, and a serial device. The port replicator connects to the bottom of your notebook. (See Device Ports on page 50 for more information) BACK PANEL COMPONENTS The following is a brief description of the port repli-
cators back panel components. (Figure 4-11) LAN (RJ-45) Jack The LAN port allows you to connect a LAN (RJ-45) cable. Note that when your notebook is connected to the port replicator, the LAN port on the system is not acces-
sible; the port replicator LAN port is the only one that can be used when it as attached to the system. PS/2 Keyboard/Mouse Port The PS/2 keyboard/mouse port allows you to connect external PS/2 devices such as an external PS/2 keyboard or mouse. USB Ports There are four USB 2.0 ports on the port replicator. USB 2.0 ports allow you to connect any USB 2.0 device for up to 480 Mbps transfer rate. USB 2.0 is backward-compat-
ible with USB 1.1 devices. External Monitor Port The external monitor port allows you to connect an external VGA or SVGA CRT monitor. Parallel Port The parallel port allows you to connect parallel devices.
(This is sometimes referred to as an LPT port.) Serial Port The serial port allows you to connect serial (RS-232C) devices. (This is sometimes referred to as a COM port.) DC Power Jack The DC power jack allows you to plug in the AC adapter or the optional Auto/Airline adapter to power your note-
book. Anti-theft Lock Slot The anti-theft lock slot allows you to lock the computer into the port replicator or to secure the port replicator alone. Power On/Suspend/Resume Button The power on/suspend/resume button allows you to poer on or suspend/resume your system via the port replicator. Digital Video Interface (DVI-D) The DVI-D port allows you to connect a flat-panel LCD monitor or television that is equipped with a DVI-D port for ultra-crisp digital images and graphics. Port Replicator Release Button Slide the port replicator release button to remove the port replicator from your notebook. 47 E Series.book Page 48 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Interface Connector Port Replicator Release Button Adjustable Guide Bar Figure 4-12. Port Replicator front panel Anti-theft Lock Slot Headphone Jack Microphone Jack To attach the port replicator, follow these easy steps:
1. Unplug the AC adapter from the system if it is con-
nected. 2. Depending upon the configuration of your system, you may need to change the position of the adjust-
able guide bar. Note the location of the interface port on the bottom of your LifeBook:
If the interface port is approximately an inch from the edge of the system, swing the guide bar backwards until it rests atop the port replicator base. If the interface port is approximately two inches away from the edge of the system, swing the guide bar forward until it snaps into place inside the positioners. (See the grey arrow in Figure 2). 3. Center your notebook over the port replicator so that the interface connector on the lower surface of your notebook aligns with the connector on top of the port replicator (Figure 4-13). 4. Push your notebook down to connect it securely to the port replicator. 5. Plug the AC adapter into the DC power jack and plug the other end into a power outlet. FRONT PANEL COMPONENTS The following is a brief description of the optional Port Replicators front panel components. Interface Connector The interface connector connects the optional port replicator to your notebook. Adjustable Guide Bar The adjustable guide bar allows you to use the port repli-
cator with different LifeBook models. Microphone Jack The microphone jack allows you to attach an external microphone via the port replicator. Headphone Jack The headphone jack allows you to connect headphones to the port replicator. Anti-theft Lock Slot The anti-theft lock slot allows you to secure the port replicator with an optional security lock/cable. Do not hold the system by the port replicator. The port replicator and/or the system could be damaged if the port replicator is used as a handle. ATTACHING THE PORT REPLICATOR The port replicator can be attached to your notebook while the power is on, while in suspend mode, or while the power is off. The AC adapter must be plugged into the port replicator in order to use all of the ports. If the adapter is connected to the system, the USB and PS/2 ports on the port replicator will not be usable. 48 E Series.book Page 49 Wednesday, April 14, 2004 10:28 AM Figure 4-13. Attaching the Port Replicator LOCKING THE PORT REPLICATOR There are two anti-theft lock slots on the port replicator:
one on the back (Figure 4-11) and one on the end
(Figure 4-12). Either slot can be used to secure the port replicator alone. The anti-theft lock slot on the back of the port replicator can also be used to lock the system into the port replicator. Follow the instructions that came with the lock/cable device for information on its use. To lock the system to the port replicator:
1. Install the system onto the port replicator as detailed in Attaching the Port Replicator. 2. Slide the anti-theft lock slot on the rear of the port replicator all the way to the left to lock the system into place (Figure 4-14). 3. Secure the lock per the instructions that came with the locking device. Until it is unlocked, the system and port replicator are locked together. Lock Unlock Figure 4-14. Locking the Port Replicator U s e r I n s t a l l a b l e F e a t u r e s DETACHING THE PORT REPLICATOR The optional port replicator can be detached from your notebook while the power is on, while in suspend mode, or while the power is off. To detach the port replicator follow these easy steps:
1. Unlock the anti-theft lock if the system is locked into place. 2. Press the port replicator release button to release the system from the port replicator. 3. While holding the port replicator release button down, lift your notebook to detach it from the port replicator. 49 E Series.book Page 50 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Device Ports Your Fujitsu LifeBook notebook and the optional Port Replicator come equipped with multiple ports to which you can connect external devices including: disk drives, keyboards, modems, printers, etc. MODEM (RJ-11) TELEPHONE JACK The modem (RJ-11) telephone jack is used for an internal modem. To connect the telephone cable follow these easy steps:
1. Align the connector with the port opening. 2. Push the connector into the port until it is seated. 3. Plug the other end of the telephone cable into a telephone outlet. (Figure 4-15) Figure 4-15. Connecting a Modem The modem sound is deactivated by default, to activate modem sound follow these easy steps:
1. Right click on the Speaker icon in your system tray. 2. Select Open Volume. 3. Select Option/Properties. 4. Under Show the following volume controls, click on Phone and click OK. 5. Uncheck the Mute box under Phone Balance. The internal modem is not intended for use with Digital PBX systems. Do not con-
nect the internal modem to a Digital PBX as it may cause serious damage to the internal modem or your entire LifeBook notebook. Consult your PBX manufac-
turers documentation for details. Some hotels have Digital PBX systems. Be sure to find out BEFORE you connect your modem. 50 The internal modem is designed to the ITU-T V.90 standard. Its maximum speed of 53000bps is the highest allowed by FCC, and its actual connec-
tion rate depends on the line conditions. The maximum speed is 33600bps at upload. The internal modem on all Fujitsu Life-
Book notebooks from Fujitsu are certi-
fied for use in the United States and Canada. The modem may be certified in other countries. INTERNAL LAN (RJ-45) JACK The internal LAN (RJ-45) jack is used for a Gigabit
(10Base-T/100Base-Tx/1000Base-T/Tx) Ethernet LAN connection. You may need to configure your notebook to work with your particular network. (Please refer to your network administrator for information on your network configuration.) To connect the LAN cable follow these easy steps:
1. Align the connector with the port opening. 2. Push the connector into the port until it is seated.(Figure 4-16) 3. Plug the other end of the cable into a LAN outlet. Figure 4-16. Connecting the LAN PARALLEL PORT The parallel port, or LPT port, located on the optional Port Replicator allows you to connect parallel devices, such as a printer to your notebook. In order to connect a parallel interface device follow these easy steps:
1. Align the connector with the port opening. 2. Push the connector into the port until it is seated.(Figure 4-17) 3. Tighten the two hold-down screws, located on each end of the connector. E Series.book Page 51 Wednesday, April 14, 2004 10:28 AM Figure 4-17. Connecting a Parallel Device to Port Replicator SERIAL PORT The serial port, or COM port, located on the optional Port Replicator allows you to connect serial devices, such as printers or scanners. In order to connect a serial inter-
face device follow these easy steps:
1. Align the connector with the port opening. 2. Push the connector into the port until it is seated. 3. Tighten the two hold-down screws, located on each end of the connector. PS/2 PORT The PS/2 port located on the optional Port Replicator allow you to connect an external keyboard or mouse. In order to connect a PS/2 interface device follow these easy steps:
1. Align the connector with the port opening.(Figure 4-
18) 2. Push the connector into the port until it is seated. A mouse or keyboard may be installed and automatically recognized by your note-
book without restarting or changing set-
ups. Figure 4-18. Connecting a PS/2 Device DOCKING PORT The docking port is used for the connection of your notebook to an optional port replicator or docking station. In order to connect your notebook to one of these devices follow the instructions that came with your docking port. (See figure 2-7 on page 10 for location) U s e r I n s t a l l a b l e F e a t u r e s UNIVERSAL SERIAL BUS PORTS The Universal Serial Bus 2.0 ports (USB) allow you to connect USB devices such as external game pads, pointing devices, keyboards and/or speakers. In order to connect a USB device follow these steps:
1. Align the connector with the port opening.(Figure 4-
19) 2. Push the connector into the port until it is seated. Due to the ongoing changes in USB tech-
nology and standards, not all USB devices and/or drivers are guaranteed to work. Figure 4-19. Connecting a USB Device INFRARED PORT The Infrared IrDA (4Mbps) port allows for wireless data transfer between your notebook and other IrDA-
compatible devices, such as another computer or a printer, without the use of a cable. (See figure 2-6 on page 9 for location) It is important to keep in mind that while carrying out this form of communication, both devices must be placed so their infrared ports are directly facing each other without obstruction. The devices must also be separated by at least 6" but no more than 36" for maximum performance. The following conditions may interfere with infrared communications:
A television, radio remote control unit, or a wireless headphone is being used nearby. Direct sunlight, fluorescent light, or incandescent light shines directly on the port. Do not move either device while com-
munication is active as it may interrupt data transmission. Be careful not to scratch the infrared port lens. Dirt, scratches, or other sur-
face marks can degrade operation. 51 E Series.book Page 52 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k STEREO LINE-IN JACK The stereo line-in jack allows you to connect an external audio source to your notebook, such as an audio cassette player. Your audio device must be equipped with a 1/8"
(3.5 mm) stereo mini-plug in order to fit into the stereo line-in jack of your notebook. In order to connect a external audio source follow these easy steps: (See figure 2-6 on page 9 for location) 1. Align the connector with the port opening. 2. Push the connector into the port until it is seated. HEADPHONE JACK The headphone jack allows you to connect headphones or powered external speakers to your notebook. Your headphones or speakers must be equipped with a 1/8
(3.5 mm) stereo mini-plug. In order to connect head-
phones or speakers follow these easy steps: (See figure 2-5 on page 8 for location) 1. Align the connector with the port opening. 2. Push the connector into the port until it is seated. Turn down the audio volume when con-
necting electronic devices to the line-in jack. The internal speakers might break if unexpected large sounds are inputted. The stereo line-in jack will not support an external microphone. IEEE 1394 PORT The 4-pin 1394 port allows you to connect digital devices that are compliant with IEEE 1394 standard. The IEEE 1394 standard is easy to use, connect, and discon-
nect. This port can allow up to 400 Mbps transfer rate. A third-party application may be required to operate your digital device with the 1394 port. The 1394 port used in this system uses a four-pin configuration. If you intend to interface with devices which use a six-pin configuration, you will need to purchase an adapter. In order to connect a 1394 device, follow these steps:
1. Align the connector with the port opening. 2. Push the connector into the port until it is seated.(Figure 4-20) If you plug headphones into the head-
phone jack, the built-in stereo speakers will be disabled. MICROPHONE JACK The microphone jack allows you to connect an external mono microphone. Your microphone must be equipped with a 1/8(3.5 mm) mono mini-plug in order to fit into the microphone jack of your notebook. In order to connect a microphone follow these easy steps: (See figure on page 7 for location) 1. Align the connector with the port opening. 2. Push the connector into the port until it is seated. EXTERNAL MONITOR PORT The external monitor port allows you to connect an external monitor. In order to connect an external monitor follow these easy steps: (See figure 2-6 on page 9 for loca-
tion) 1. Align the connector with the port opening. 2. Push the connector into the port until it is seated. 3. Tighten the two hold-down screws, located on each end of the connector. Pressing the [Fn] + [F10] keys allows you to change your selection of where to send your display video. Each time you press the key combination, you will step to the next choice, starting with the built-in display panel only, moving to the external monitor only, finally moving to both the built-in display panel and an external monitor. Figure 4-20. Connecting an IEEE 1394 Device 52 E Series.book Page 53 Wednesday, April 14, 2004 10:28 AM 5 Troubleshooting 53 E Series.book Page 54 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k 54 E Series.book Page 55 Wednesday, April 14, 2004 10:28 AM Troubleshooting Your Fujitsu LifeBook notebook is sturdy and subject to few problems in the field. However, you may encounter simple setup or operating problems that you can solve on the spot, or problems with peripheral devices, that you can solve by replacing the device. The information in this section helps you isolate and resolve some of these straightforward problems and identify failures that require service. IDENTIFYING THE PROBLEM If you encounter a problem, go through the following procedure before pursuing complex troubleshooting:
1. Turn off your LifeBook notebook. 2. Make sure the AC adapter is plugged into your note-
book and to an active AC power source. 3. Make sure that any card installed in the PC Card slot is seated properly. You can also remove the card from the slot, thus eliminating it as a possible cause of failure. 4. Make sure that any devices connected to the external connectors are plugged in properly. You can also disconnect such devices, thus eliminating them as possible causes of failure. 5. Turn on your notebook. Make sure it has been off at least 10 seconds before you turn it back on. 6. Go through the boot sequence. 7. If the problem has not been resolved, refer to the Troubleshooting Table, that follows, for more detailed troubleshooting information. If you keep notes about what you have tried, your support representative may be able to help you more quickly by giving additional suggestions over the phone. T r o u b l e s h o o t i n g 8. If you have tried the solutions suggested in the Trou-
bleshooting Table without success, contact your support representative:
Toll free: 1-800-8Fujitsu (1-800-838-5487) E-mail: 8fujitsu@us.fujitsu.com Web site: us.fujitsu.com/computers. Before you place the call, you should have the following information ready so that the customer support represen-
tative can provide you with the fastest possible solution:
Product name Product configuration number Product serial number Purchase date Conditions under which the problem occurred Any error messages that have occurred Hardware configuration Type of device connected, if any See the Configuration Label on the bottom of your notebook for configuration and serial numbers. (See figure 2-7 on page 10 for location) SPECIFIC PROBLEMS Using the Troubleshooting Table When you have problems with your LifeBook notebook, try to find the symptoms under the Problem column of the troubleshooting table for the feature giving you difficulty. You will find a description of common causes for that symptom under the column Possible Cause and what, if anything, you can do to correct the condition under Possible Solutions. All possible causes or solutions may not apply to your notebook. 55 E Series.book Page 56 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k TROUBLESHOOTING TABLE Problem Page Audio Problems . page 56 DVD/CD-ROM Drive Problems. page 56 Port Replicator Problems. page 57 Floppy Disk Drive Problems . page 57 Hard Drive Problems . page 57 Keyboard or Mouse Problems. page 58 Memory Problems . page 58 Problem Page Modem Problems. page 58 Parallel, Serial and USB Device Problems . page 58 PC Card Problems . page 59 Power Failures . page 59 Shutdown and Startup Problems . page 61 Video Problems . page 62 Miscellaneous Problems . page 63 Problem Possible Cause Possible Solutions Audio Problems There is no sound coming from the built-in speakers. The volume is turned too low. Adjust the volume control on your notebook. The software volume control is set too low. Adjust the sound volume control settings in your software, operating system and applications. Headphones are plugged into your notebook. Plugging in headphones disables the built-in speakers, remove the headphones. BIOS audio settings are incorrect. Set the BIOS setup utility to the default values within the Multimedia Device Configuration menu. (See BIOS Setup Utility on page 29 for more information) Software driver is not configured correctly. Refer to your application and operating system documentation for help. The speakers have been muted using the Volume icon in the system tray. Click on the Volume icon in the tool tray on the bottom right of the screen. (It looks like a speaker). If the Mute box is checked, click on it to uncheck it. DVD/CD-RW/CD-ROM Drive Problems LifeBook notebook fails to recognize DVD/CD-RW/
CD-ROMs. Protective sheet is still in the DVD/CD-RW/CD-ROM drive tray. Replace DVD/CD-RW/CD-ROM in tray. DVD/CD-RW/CD-ROM is not pushed down onto raised center circle of the drive. Open DVD/CD-RW/CD-ROM tray and re-install DVD/CD-RW/CD-ROM properly. DVD/CD-RW/CD-ROM tray is not latched shut. Push on the front of the DVD/CD-RW/CD-ROM tray until it latches. Incorrect DVD Player or no DVD Player software is installed. Wrong drive designator was used for DVD/CD-RW/CD-
ROM in the application. Install DVD Player software. (See Media Player Software on page 39 for more information.) Verify the drive designator used by the application is the same as the one used by the operating system. When the operating system is booted from a DVD/
CD, drive designations are automatically adjusted. Note that the drive designation can be changed with the Disk Management tool located at Administrative Tools -> Computer Managenment. 56 E Series.book Page 57 Wednesday, April 14, 2004 10:28 AM Problem Possible Cause Possible Solutions LifeBook notebook fails to recognize DVD/CD-RW/
CD-ROMs (continued) Windows DVD/CD-RW/CD-
ROM auto insertion function is disabled. Start the DVD/CD-RW/CD-ROM from the desktop or application software or re-enable the Windows DVD/CD-RW/CD-ROM auto insertion function. T r o u b l e s h o o t i n g Wipe DVD/CD-RW/CD-ROM with a non-abrasive CD cleaning cloth and reinsert. It if still will not work try another DVD/CD-RW/CD-ROM in the drive. This is normal. However, you may disable this feature. LifeBook notebook fails to recognize DVD/CD-RW/
CD-ROMs. DVD/CD-RW/CD-ROM is dirty or defective. The Windows DVD/CD-RW/
CD-ROM auto insertion func-
tion is active and is checking to see if a DVD/CD-RW/CD-
ROM is ready to run. The DVD/CD-RW/CD-
ROM Access indicator on the Status Indicator Panel blinks at regular intervals when no DVD/CD-RW/
CD-ROM is in the tray or the DVD/CD-RW/CD-
ROM drive is not installed. Port Replicator Problems Note: Be sure to power down your LifeBook notebook before adding a printer to the Port Replicator parallel port. LifeBook notebook does not turn on when installed in the optional Port Replicator Port Replicator AC adapter is not plugged in. Notebook is not properly seated in the Port Replicator. Floppy Disk Drive Problems You cannot access your floppy disk. You tried to write to a write protected floppy disk. Provide power to the Port Replicator. Remove and re-dock your LifeBook notebook. Eject the floppy disk and set it to write enable.
(See Preparing a Disk for Use on page 42 for more information) Hard Drive Problems You cannot access your hard drive. Floppy disk is not loaded correctly. Eject floppy disk, check orientation and re-insert.
(See Ejecting a Disk on page 42 for more information) The floppy disk drive may not be properly installed. Security is set to protect access to floppy disk data. Remove and re-install your floppy disk drive. Verify your password and security settings. The setup utility is incorrectly set for your internal (Primary Master) or optional second hard drive (Primary Slave). Revise BIOS settings to set both Primary Master and Primary Slave correctly. (See BIOS Setup Utility on page 29 for more information) The wrong drive designator was used by an application when a bootable CD-ROM was used to start the notebook. Verify drive designator used by application is in use by the operating system. When the operating system is booted from a CD, drive designations are automatically adjusted. Security is set so your oper-
ating system cannot be started without a password. Verify your password and security settings. 57 E Series.book Page 58 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Problem Possible Cause Possible Solutions Keyboard or Mouse Problems The built-in keyboard does not seem to work. The notebook has gone into Suspend mode. Push the Power/Suspend/Resume button. You have installed an external keyboard or mouse, and it does not seem to work. Your application has locked out your keyboard. Try to use your integrated pointing device to restart your system. Your external device is not properly installed. Re-install your device. (See Device Ports on page 50 for more information) Your operating system software is not setup with the correct software driver for that device. Check your device and operating system docu-
mentation and activate the proper driver. Your mouse or keyboard is connected to the wrong PS/2 port on the optional Port Replicator. Plug the mouse into the PS/2 Mouse port and the external keyboard or numeric key pad into the PS/2 Keyboard port. (See PS/2 Port on page 51 for more information) You have connected an external keyboard or a mouse and it seems to be locking up the system. Your operating system software is not setup with the correct software driver for that device. Check your device and operating system documentation and activate the proper driver. Your system has crashed. Try to restart your notebook. I Memory Problems Your Power On screen, or Main menu of the BIOS setup utility information, does not show the correct amount of installed memory. Modem Problems Messages about modem operation. Your memory upgrade module is not properly installed. Remove and re-install your memory upgrade module. (See Memory Upgrade Module on page 45 for more information) You have a memory failure. Check for Power On Self Test (POST) messages.
(See Power On Self Test Messages on page 64 for more information) Messages about modem operation are generated by whichever modem application is in use. See your application software documentation for additional information. Parallel, Serial, and USB Device Problems You have installed a parallel port device, a serial port device or a USB device. Your LifeBook notebook does not recognize the device, or the device does not seem to work properly. The device is not properly installed. Remove and re-install the device. (See Device Ports on page 50 for more information) The device may have been installed while an application was running, so your notebook is not aware of its installation. Close the application and restart your notebook. Your device may not have the correct software driver active. See your software documentation and activate the correct driver. You may have the wrong I/O address selected for your device. See your device documentation and software docu-
mentation to determine the required I/O address. Change the settings in the BIOS setup utility. (See BIOS Setup Utility on page 29 for more information) 58 E Series.book Page 59 Wednesday, April 14, 2004 10:28 AM Problem Possible Cause Possible Solutions T r o u b l e s h o o t i n g You have installed a parallel port device, a serial port device or a USB device. Your LifeBook notebook does not recognize the device, or the device does not seem to work properly.
(continued) PC Card Problems A card inserted in the PC Card slot does not work or is locking up the system. Power Failures You turn on your LifeBook notebook and nothing seems to happen. Your device and another device are assigned the same I/O address. Check all I/O addresses located within the BIOS setup utility and any other installed hardware or software to make sure there are no duplications. Parallel port is set to output only. Check parallel port setting in the BIOS and set to bi-directional or ECP. The card is not properly installed. Remove and re-install the card. (See PC Cards on page 43 for more information) The card may have been installed while an application was running, so your notebook is not aware of its installation. Your software may not have the correct software driver active. You may have the wrong I/O address selected for your PC Card device. Close the application and restart your notebook. See your software documentation and activate the correct driver. See your PC Card documentation to determine the required I/O address. Change the settings in the BIOS. (See BIOS Setup Utility on page 29 for more information) Your PC Card device and another device are assigned the same I/O address. Check all I/O addresses located within the BIOS setup utility and any other installed hardware or software to make sure there are no duplications. The installed primary battery is completely discharged, there is no optional second battery installed or there is no Power adapter (AC or Auto/Airline) installed. The primary battery is installed but is faulty. Check the Status Indicator Panel to determine the presence and condition of the batteries. (See Status Indicator Panel on page 11 for more information) Install a charged battery or a Power adapter. Use the Status Indicator panel to verify the presence and condition of the batteries. (See Status Indicator Panel on page 11 for more information) If a battery is indicating a short, remove that battery and operate from another power source or replace that battery. The battery or batteries are low. Check the Status Indicator Panel to determine the presence and condition of the batteries. (See Status Indicator Panel on page 11 for more information) Use a Power adapter to operate until a battery is charged or install a charged battery. The power adapter (AC or auto/airline) is not plugged in properly. Verify that your adapter is connected correctly. (See Power Sources on page 27 for more information) 59 E Series.book Page 60 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Problem Possible Cause Possible Solutions You turn on your LifeBook notebook and nothing seems to happen.
(continued) The Power adapter (AC or auto/airline) has no power from the AC outlet, airplane seat jack, or the cars cigarette lighter. Move the AC cord to a different outlet, check for a line switch or tripped circuit breaker for the AC outlet. If you are using an auto/airline adapter in a car make sure the ignition switch is in the On or Accessories position. The Power adapter (AC or auto/airline) is faulty. Try a different Power adapter or install a charged optional second battery. Your LifeBook notebook turns off all by itself. The power management parameters are set for auto timeouts which are too short for your operating needs. You are operating on battery power only and have ignored a low battery alarm until the batteries are all at the dead battery state and your machine has gone into Dead Battery Suspend mode. You have a battery failure. Press any button on the keyboard, or move the mouse to restore operation. If that fails, push the Power/Suspend/Resume button. Check your power management settings, or close your applications and go to the Power Savings menu of the setup utility to adjust the timeout values to better suit your needs. Install a power adapter and then push the Power/
Suspend/Resume button. (See Power Sources on page 27 for more information) Verify the condition of the batteries using the Status Indicator panel, and replace or remove any batteries that are shorted. (See Status Indicator Panel on page 11 for more information) Your LifeBook notebook will not work on battery alone. Your power adapter has failed or lost its power source. Make sure the adapter is plugged in and the outlet has power. The installed batteries are dead. Replace the battery with a charged one or install a Power adapter. No batteries are installed. Install a charged battery. The batteries are improperly installed. Verify that the batteries are properly connected by re-installing them. Your installed batteries are faulty. You are running an application that uses a great deal of power due to frequent hard drive access or DVD/CD-ROM access, use of a modem card or a LAN PC card. The power savings features may be disabled. Verify the condition of the batteries using the Status Indicator panel and replace or remove any batteries that are shorted. (See Status Indicator Panel on page 11 for more information) Use both the primary battery and an optional second battery and/or use a power adapter for this application when at all possible. Check the power management and/or setup utility settings in the Power Savings menu and adjust according to your operating needs. The brightness is turned all the way up. Turn down the brightness adjustment. The higher the brightness the more power your display uses. The batteries are very old. Replace the batteries. The batteries seem to discharge too quickly. 60 E Series.book Page 61 Wednesday, April 14, 2004 10:28 AM Problem Possible Cause Possible Solutions The batteries seem to discharge too quickly. The batteries have been exposed to high temperatures. Replace the batteries. T r o u b l e s h o o t i n g
(continued The batteries are too hot or too cold. Shutdown and Startup Problems The Suspend/Resume button does not work. The Suspend/Resume button is disabled from the Advanced submenu of the Power menu of the setup utility. You did not hold the button in long enough. There may be a conflict with the application software. The system powers up, and displays power on informa-
tion, but fails to load the operating system. The boot sequence settings of the setup utility are not compatible with your configuration. You have a secured system requiring a password to load your operating system. Internal hard drive was not detected. Power On Self Test (POST) has detected a problem. BIOS setup changes were not saved when you made them and exited the BIOS setup utility returning it to previous settings. The BIOS CMOS hold-up battery has failed. The system may be password-
protected. An error message is displayed on the screen during the notebook
(boot) sequence. Your notebook appears to change setup parameters when you start it. Your system display wont turn on when the system is turned on or when the system has resumed. Restore the notebook to normal operating tempera-
ture. The Charging icon on the Status Indicator panel will flash when the battery is outside its operating range. Enable the button from the setup utility. Hold the button longer. This may need to be a few seconds if your application is preventing the CPU from checking for button pushes. Close all applications and try the button again. Set the operating source by pressing the [ESC] key while the Fujitsu logo is on screen or use the [F2]
key and enter the setup utility and adjust the source settings from the Boot menu. (See BIOS Setup Utility on page 29 for more information) Make sure you have the right password. Enter the setup utility and verify the Security settings and modify them as accordingly. (See BIOS Setup Utility on page 29 for more information) Use the BIOS setup utility or Primary Master submenu, located within the Main menu, to try to auto detect the internal hard drive. See the Power On Self Test (POST) messages to determine the meaning and severity of the problem. Not all messages are errors; some are simply status indicators. (See Power On Self Test Messages on page 64 for more information) Make sure you select Save Changes And Exit when exiting the BIOS setup utility. Contact your support representative for repairs. This is not a user serviceable part but has a normal life of 3 to 5 years. Check the status indicator panel to verify that the Security icon is blinking. If it is blinking, enter your password. 61 E Series.book Page 62 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Problem Possible Cause Possible Solutions Video Problems The built-in display is blank when you turn on your LifeBook notebook. Something is pushing on the Closed Cover switch. Clear the Closed Cover switch. (See figure 2-3 on page 6 for location) The notebook is set for an external monitor only. The angle of the display and the brightness settings are not adequate for your lighting conditions. Pressing [F10] while holding down the [Fn] key allows you to change your selection of where to send your display video. Each time you press the combination of keys you will step to the next choice. The choices, in order are: built-in display only, external monitor only, both built-in display and external monitor. Move the display and the brightness control until you have adequate visibility. The power management time-
outs may be set for very short intervals and you failed to notice the display come on and go off again. Press any button the keyboard, or move the mouse to restore operation. If that fails, push the Power/
Suspend/Resume button. (The display may be shut off by Standy mode, Auto Suspend or Video Timeout) The LifeBook notebook turned on with a series of beeps and your built-in display is blank. Power On Self Test (POST) has detected a failure which does not allow the display to operate. The display goes blank by itself after you have been using it. The notebook has gone into Video timeout, Standby mode, Suspend mode or Save-to-Disk mode because you have not used it for a period of time. Contact your support representative. Press any button on the keyboard, or move the mouse to restore operation. If that fails, push the Power/Suspend/Resume button. Check your power management settings, or close your applications and go to the Power Savings menu of the setup utility to adjust the timeout values to better suit your operation needs. (See BIOS Setup Utility on page 29 for more information) The power management time-
outs may be set for very short intervals and you failed to notice the display come on and go off again. Press any button on the keyboard, or move the mouse to restore operation. If that fails, push the Power/
Suspend/Resume button. (The display may be shut off by Standby Mode, Auto Suspend or Video Timeout) Something is pushing on the Closed Cover switch. Check the Closed Cover switch. (See figure 2-3 on page 6 for location) The system may be password-
protected. Check the status indicator panel to verify that the Security icon is blinking. If it is blinking, enter your password. A foreign object, such as a paper clip, is stuck between the display and the keyboard. Remove all foreign objects from the keyboard. Your system display wont turn on when the system is turned on or when the system has resumed. The Built-in Display does not close. 62 E Series.book Page 63 Wednesday, April 14, 2004 10:28 AM Problem Possible Cause Possible Solutions T r o u b l e s h o o t i n g The Built-in Display has bright or dark spots. The application display uses only a portion of your screen and is surrounded by a dark frame. If the spots are very tiny and few in number, this is normal for a large LCD display. If the spots are numerous or large enough to interfere with your operation needs. You are running an application that does not support 800 x 600/1024 x 768 pixel resolution display and display compres-
sion is enabled. This is normal; do nothing. Display is faulty; contact your support representative. Display compression gives a clearer but smaller display for applications that do not support 800 x 600/1024 x 768 pixel resolution. You can fill the screen but have less resolution by changing your display compression setting, (See the Video Features submenu, located within the Advanced menu of the BIOS. (See BIOS Setup Utility on page 29 for more information) The Display is dark when on battery power. The Power Management utility default is set on low brightness to conserve power. Press [Fn] + [F7] to increase brightness or double-
click on the battery gauge and adjust Power Control under battery settings. You have connected an external monitor and it does not display any information. Your BIOS setup is not set to enable your external monitor. Try toggling the video destination by pressing [Fn]
and [F10] together, or check your BIOS setup and enable your external monitor. (See the Video Features submenu, located within the Advanced Menu of the BIOS. (See BIOS Setup Utility on page 29 for more information) Your external monitor is not properly installed. Reinstall your device. (See External Monitor Port on page 52 for more information) Your operating system soft-
ware is not setup with the correct software driver for that device. Check your device and operating system documentation and activate the proper driver. You have connected an external monitor and it does not come on. Your external monitor is not compatible with your LifeBook notebook. See your monitor documentation and the External Monitor Support portions of the Specifications section. (See Specifications on page 77 for more information) Miscellaneous Problems An error message is displayed on the screen during the operation of an application. Application software often has its own set of error message displays. See your application manual and help displays screens for more information. Not all messages are errors some may simply be status. 63 E Series.book Page 64 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k POWER ON SELF TEST MESSAGES The following is an alphabetic list of error-and-status messages that Phoenix BIOS and/or your operating system can generate and an explanation of each message. Error messages are marked with an *. If an error message is displayed that is not in this list, write it down and check your operating system documentation both on screen and in the manual. If you can find no reference to the message and its meaning is not clear, contact your support representative for assistance. nnnn Cache SRAM Passed Where nnnn is the amount of system cache in kilobytes success-fully tested by the Power On Self Test. (This can only appear if you have an SRAM PC Card installed.)
*Diskette drive A error or Diskette drive B error Drive A: or B: is present but fails the BIOS Power On Self Test diskette tests. Check to see that the drive is defined with the proper diskette type in the Setup Utility, (See BIOS Setup Utility on page 29 for more information) and that the diskette drive is installed correctly. If the disk drive is properly defined and installed, avoid using it and contact your support representative.
*Extended RAM Failed at offset: nnnn Extended memory not working or not configured prop-
erly. If you have an installed memory upgrade module, verify that the module is properly installed. If it is prop-
erly installed, you may want to check your Windows Setup to be sure it is not using unavailable memory until you can contact your support representative. nnnn Extended RAM Passed Where nnnn is the amount of memory in kilobytes successfully tested.
*Failing Bits: nnnn The hex number nnnn This is a map of the bits at the memory address (in System, Extended, or Shadow memory) which failed the memory test. Each 1 (one) in the map indicates a failed bit. This is a serious fault that may cause you to lose data if you continue. Contact your support representative.
*Fixed Disk x Failure or Fixed Disk Controller Failure (where x = 1-4) The fixed disk is not working or not configured properly. This may mean that the hard drive type identified in your setup utility does not agree with the type detected by the Power On Self Test. Run the setup utility to check for the hard drive type settings and correct them if necessary. If the settings are OK and the message appears when you restart the system, there may be a serious fault which might cause you to lose data if you continue. Contact your support representative. 64
*Incorrect Drive A type run SETUP Type of floppy drive A: not correctly identified in Setup. This means that the floppy disk drive type identified in your setup utility does not agree with the type detected by the Power On Self Test. Run the setup utility to correct the inconsistency.
*Incorrect Drive B type run SETUP Type of floppy drive B: not correctly identified in Setup. This means that the floppy disk drive type identified in your setup utility does not agree with the type detected by the Power On Self Test. Run the setup utility to correct the inconsistency.
*Invalid NVRAM media type Problem with NVRAM access. In the unlikely case that you see this message you may have some display prob-
lems. You can continue operating but should contact your support representative for more information.
*Keyboard controller error The keyboard controller test failed. You may have to replace your keyboard or keyboard controller but may be able to use an external keyboard until then. Contact your support representative.
*Keyboard error Keyboard not working. You may have to replace your keyboard or keyboard controller but may be able to use an external keyboard until then. Contact your support representative.
*Keyboard error nn BIOS discovered a stuck key and displays the scan code for the stuck key. You may have to replace your keyboard but may be able to use an external keyboard until then. Contact your support representative.
*Monitor type does not match CMOS Run SETUP Monitor type not correctly identified in Setup. This error probably means your BIOS is corrupted, run the setup utility and set all settings to the default conditions. If you still get this error, contact your support representative.
*Operating system not found Operating system cannot be located on either drive A: or drive C: Enter the setup utility and see if both the fixed disk, and drive A: are properly identified and that the boot sequence is set correctly. Unless you have changed your installation greatly, the operating system should be on drive C:. If the setup utility is correctly set, your hard drive may be corrupted.
*Parity Check 1 nnnn Parity error found in the system bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the address, it displays ????. This is a potentially data destroying failure. Contact your support representative. E Series.book Page 65 Wednesday, April 14, 2004 10:28 AM
*Parity Check 2 nnnn Parity error found in the I/O bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the address, it displays ????. This is a potentially data-destroying failure. Contact your support representative.
*Press <F1> to resume, <F2> to SETUP Displayed after any recoverable error message. Press the [F1] key to continue the boot process or the [F2]
key to enter Setup and change any settings.
*Previous boot incomplete Default configuration used Previous Power On Self Test did not complete success-
fully. The Power On Self Test will load default values and offer to run Setup. If the previous failure was caused by incorrect values and they are not corrected, the next boot will likely fail also. If using the default settings does not allow you to complete a successful boot sequence, you should turn off the power and contact your support representative.
*Real time clock error Real-time clock fails BIOS test. May require board repair. Contact your support representative.
*Shadow RAM Failed at offset: nnnn Shadow RAM failed at offset nnnn of the 64k block at which the error was detected. You are risking data corrup-
tion if you continue. Contact your support representative. nnnn Shadow RAM Passed Where nnnn is the amount of shadow RAM in kilobytes successfully tested.
*System battery is dead Replace and run SETUP The BIOS CMOS RAM memory hold up battery is dead. This is part of your BIOS and is a board mounted battery which requires a support representative to change. You can continue operating but you will have to use setup utility default values or reconfigure your setup utility every time you turn off your notebook. This battery has an expected life of 2 to 3 years. System BIOS shadowed System BIOS copied to shadow RAM.
*System CMOS checksum bad run SETUP BIOS CMOS RAM has been corrupted or modified incorrectly, perhaps by an application program that changes data stored in BIOS memory. Run Setup and reconfigure the system.
*System RAM Failed at offset: nnnn System memory failed at offset nnnn of in the 64k block at which the error was detected. This means that there is a fault in your built-in memory. If you continue to operate, you risk corrupting your data. Contact your support representative for repairs. T r o u b l e s h o o t i n g nnnn System RAM Passed Where nnnn is the amount of system memory in kilobytes successfully tested.
*System timer error The timer test failed. The main clock that operates the computer is faulty. Requires repair of system board. Contact your support representative for repairs. UMB upper limit segment address: nnnn Displays the address of the upper limit of Upper Memory Blocks, indicating released segments of the BIOS memory which may be reclaimed by a virtual memory manager. Video BIOS shadowed Video BIOS successfully copied to shadow RAM. EMERGENCY MEDIA PLAYER DRIVE TRAY RELEASE If for some reason the eject button fails, you can open the DVD/CD-ROM tray with a paper clip or similar tool inserted into the eject hole in the far right side of the front of the tray. Straighten one side of a paper clip and push it gently into the hole. The tray will pop out a short distance. MODEM RESULT CODES The operating system and application software that is factory installed detects the modem characteristics and provides the necessary command strings to operate the modem. The internal modem operation is controlled by generic AT commands from the operating system and application software. The standard long form result codes may, in some cases, be displayed on your screen to keep you informed of the actions of your modem. The operating system and application software may suppress display of the result codes. Examples of result codes are:
OK NO CARRIER NO DIALTONE CONNECT 53000 (Connection complete at 53,000 bps.) ERROR FAX RING (This means an incoming call.) BUSY NO ANSWER When using the internal modem with applications that are not factory installed refer to the application documentation. 65 E Series.book Page 66 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k RESTORING YOUR PRE-INSTALLED SOFTWARE The Drivers and Applications Restore (DAR) CD contains:
Sets of device drivers and Fujitsu utilities (in specific directories) that are unique to your LifeBook note-
book configuration for use as documented below. A link to the Drive Image Special Edition (DISE) utility on your hard disk drive. Read-me files that provide additional use information for items on this CD-ROM. If the DAR CD is in the drive when you boot up the system, a message will appear informing you that continuing to boot from the CD will overwrite all information on the hard drive, including saved files, and restore the hard drive to its factory configuration. If you wish to install drivers or applications only from the CD, remove the disk from the drive, reboot the system, and insert the CD after Windows has started. If you have access to the internet, visit the Fujitsu Support web site at us.fujitsu.com/
computers to check for the most current information, drivers and hints on how to perform recovery and system updates. DRIVE IMAGE SPECIAL EDITION (DISE) PowerQuest Drive Image Special Edition (DISE) provides a way to restore your computer if you experi-
ence a hard disk crash or other system failure. Fujitsu has used DISE to create an image of everything installed on the computer at the time you purchased it. The image is saved on a separate partition on the hard disk. You can use DISE to restore the factory image and return your computer to the state in which it was shipped from Fujitsu. Although it is not necessary, you can use DISE to store additional image files that you create. For example, if you install several applications and save data files on your hard disk, you can create a new image file that includes them and then save that image file on the hard disk. Then, in the event of a hard disk failure, you can restore the image that includes the applications and data files you use. Using the DISE feature will reduce the amount of usable disk space on your hard disk drive. 66 Creating a Backup Image You can create a backup image of your C:\ drive at any time. The C:\ partition must be a FAT, FAT32, or NTFS partition, and it must be directly before the backup partition on your hard disk. There are two ways to implement the DISE utility: When booting up the system, or from the desktop. Creating a backup image when booting up Before creating a backup image at boot-up, you must first change the boot-up priority in the BIOS so that the system will go to the CD drive first, rather than trying to boot-up from the hard drive or an external floppy disk drive. To change the boot-up priority:
1. Start your system and press the [F2] key when the Fujitsu logo appears. You will enter the BIOS Setup Utility. 2. Using the arrow keys, go to the Boot menu. 3. Arrow down to the Boot Device Priority submenu and press [Enter]. 4. Arrow down to the CD-ROM drive in the list, and press the space bar (or the + key) to move the CD-
ROM drive to the top of the list. (The system attempts to boot from the devices in the order in which they are listed.) 5. Press [F10], then click on [Yes] to exit the BIOS Setup Utility and return to the boot process. After you have changed the boot priority, you can create a backup image when you are booting up:
1. Install the DAR CD in the drive prior to booting up. When bootup begins, a message will appear informing you that continuing to boot from the CD will overwrite all information on the hard drive, including saved files, and restore the hard drive to its factory configuration. 2. When you are asked if you want to restore the factory image, click [Y]es. Creating a backup image from the desktop To create a backup image from the desktop, select Drive Image SE from the Program list. You will initially be prompted to create a backup diskette. It is not necessary to create the backup diskette, since the DAR CD performs the same function. 1. At the Drive Image Special Edition main screen, click Options> Create New Backup. DISE displays a warning that it must go to DOS to create the image. 3. Click Yes. DISE creates an image file in the backup partition. If you created a backup image previously, the new image overwrites the old one. E Series.book Page 67 Wednesday, April 14, 2004 10:28 AM Enlarging the Backup Partition If there is not enough unused space in the backup parti-
tion on your hard disk, DISE will resize the partition. DISE will display the minimum, maximum, and recom-
mended sizes for the backup partition. You choose the size you want. DISE takes the space from the FAT, FAT32, or NTFS partition that you are backing up. If there is not enough unused space in that partition to take, you will not be able to resize the backup partition and create an image file. You can delete files from the FAT, FAT32, or NTFS partition to create more unused space on the hard disk. Restoring a Backup Image You can restore either a factory image or a backup image you created. Be aware that restoring a backup image will replace the contents of the C:\ partition with the image you restore. 1. Disable virus protection software. If virus protection software is enabled, DISE will hang. 2. From the DISE main window, click Options >
Restore Backup to restore an image you created, or click Options > Restore Factory Backup to restore the factory image. DISE shuts down to DOS and restores the image file. Re-Installing Individual Drivers and Applications The Drivers and Application CD can be used to selec-
tively re-install drivers and/or applications that may have been un-installed or corrupted. To re-install drivers and/or applications:
1. Boot up the system and insert the DAR CD after Windows has started. The LifeBook Easy Installation screen appears. T r o u b l e s h o o t i n g AUTOMATICALLY DOWNLOADING DRIVER UPDATES Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. The FDU icon should appear in the system tray at the bottom right of your screen (roll the cursor over the icons to find the correct one). If the FDU icon does not appear in the system tray, it can be started by going to
[Start] -> All Programs, and clicking on Fujitsu Driver Update; this will create the icon automatically. To invoke the FDU menu, you can either right-click on the FDU icon or hold the pen on the icon for a couple of seconds until the menu appears. The menu contains the following items:
Check for updates now Allows for manual driver update search. The first time it is used, you are prompted to agree to a user agreement. After clicking on the icon, the FDU auto-
matically connects with the Fujitsu site to check for updates and downloads them. While downloading, the icon has a red bar through it, indicating that it cannot be used while the download is in process. When the update is complete, a message appears informing you of the fact. Enable Automatic Update Notifications Automatically searches for new updates on a regular basis (approximately every 3 days). Show update history Brings up a screen that displays a history of updates that have been made via the FDU. 2. Select the drivers and applications you want to About Fujitsu Driver Update install from the list that is displayed. 3. Click [Start]. Follow the prompts that appear to complete installation of the selected drivers and/or applications. Displays the FDU version number and copyright information Fujitsu Driver Update Readme Displays the FDU readme. 67 E Series.book Page 68 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k 68 E Series.book Page 69 Wednesday, April 14, 2004 10:28 AM 6 Care and Maintenance 69 E Series.book Page 70 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k 70 E Series.book Page 71 Wednesday, April 14, 2004 10:28 AM Care and Maintenance If you use your Fujitsu LifeBook notebook carefully, you will increase its life and reliability. This section provides some tips for looking after the notebook and its devices. Electrical equipment may be hazardous if misused. Operations of this product or simi-
lar products, must always be supervised by an adult. Do not allow children access to the interior of any electrical products and do not permit them to handle any cables. Caring for your LifeBook notebook Your LifeBook notebook is a durable but sensitive elec-
tronic device. Treat it with respect and care. Make a habit of transporting it in a suitable carrying case. C a r e a n d M a i n t e n a n c e Cleaning your LifeBook notebook Always disconnect the power plug. (Pull the plug, not the cord.) Clean your LifeBook notebook with a damp, lint-free cloth. Do not use abrasives or solvents. Use a soft cloth to remove dust from the screen. Never use glass cleaners. Storing your LifeBook notebook If storing your notebook for a month or longer, turn your LifeBook notebook off, fully charge the battery(s), then remove and store all Lithium ion batter-
ies. Store your notebook and batteries separately. If you store your LifeBook with a battery installed, the battery will discharge, and battery life will be reduced. In addi-
tion, a faulty battery might damage your LifeBook. Do not attempt to service the computer yourself. Store your Fujitsu LifeBook in a cool, dry location. Always follow installation instructions closely. Keep it away from food and beverages. If you accidentally spill liquid on your LifeBook note-
book:
1. Turn it off. 2. Position it so that the liquid can run out. 3. Let it dry out for 24 hours, or longer if needed. 4. If your notebook will not boot after it has dried out, call your support representative. Do not use your Fujitsu LifeBook notebook in a wet environment (near a bathtub, swimming pool). Always use the AC adapter and batteries that are approved for your notebook. Avoid exposure to sand, dust and other environmental hazards. Do not expose your notebook to direct sunlight for long periods of time as temperatures above 140 F (60 C) may damage your notebook. Keep the covers closed on the connectors and slots when they are not in use. Do not put heavy or sharp objects on the computer. If you are carrying your LifeBook notebook in a brief-
case, or any other carrying case, make sure that there are no objects in the case pressing on the lid. Never position your notebook such that the optical drive is supporting the weight of the notebook. Do not drop your notebook. Do not touch the screen with any sharp objects. Temperatures should remain between 13F (-25C) and 140F (60C). Traveling with your LifeBook notebook Do not transport your notebook while it is turned on. It is recommended that you carry your notebook with you while travelling, rather than checking it in as bag-
gage. Always bring your System Recovery CD that came with your notebook when you travel. If you experience sys-
tem software problems while traveling, you may need it to correct any problems. Never put your notebook through a metal detector. Have your notebook hand-inspected by security per-
sonnel. You can however, put your notebook through a properly tuned X-ray machine. To avoid problems, place your notebook close to the entrance of the machine and remove it as soon as possible or have your notebook hand-inspected by security personnel. Secu-
rity officials may require you to turn your notebook On. Make sure you have a charged battery on hand. When traveling with the hard drive removed, wrap the drive in a non-conducting materials (cloth or paper). If you have the drive checked by hand, be ready to install the drive if needed. Never put your hard drive through a metal detector. Have your hard drive hand-inspected by security personnel. You can however, put your hard drive through a properly tuned X-ray machine. Take the necessary plug adapters if you're traveling over-
seas. Check the following diagram to determine which plug adapter you'll need or ask your travel agent. 71 E Series.book Page 72 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Outlet Type Location United States, Canada, parts of Latin America, Mexico, Japan, Korea, the Philippines, Taiwan Russia and the Commonwealth of Independent States (CIS), most of Europe, parts of Latin America, the Middle East, parts of Africa, Hong Kong, India, most of South Asia United Kingdom, Ireland, Malaysia, Singapore, parts of Africa China, Australia, New Zealand BATTERIES Caring for your Batteries Always handle batteries carefully. Do not short-circuit the battery terminals (that is, do not touch both terminals with a metal object). Do not carry lose batteries in a pocket or purse where they may mix with coins, keys, or other metal objects. Doing so may cause an explosion or fire. Do not drop, puncture, disassemble, mutilate or incin-
erate the battery. Recharge batteries only as described in this manual and only in ventilated areas. Do not leave batteries in hot locations for more than a day or two. Intense heat can shorten battery life. Do not leave a battery in storage for longer than 6 months without recharging it. Increasing Battery Life Power your LifeBook notebook through the AC or optional auto/airline adapter whenever possible. If your notebook is running on battery power all day, connect it to the AC adapter overnight to recharge the battery. Keep brightness to the lowest level comfortable. Set the power management for maximum battery life. Put your notebook in Suspend mode when it is turned on and you are not actually using it. Limit your media drive access. 72 Disable the Media Player auto insert notification function. Always use fully charged batteries. Eject PCMCIATM cards when not in use. FLOPPY DISKS AND DRIVES Caring for your Floppy Disks Avoid using the floppy disks in damp and dusty locations. Never store a floppy disk near a magnet or magnetic field. Do not use a pencil or an eraser on a disk or disk label. Avoid storing the floppy disks in extremely hot or cold locations, or in locations subject to severe temperature changes. Store at temperatures between 50 F (10C) and 125F (52C). Do not touch the exposed part of the disk behind the metal shutter. Never use the floppy disk drive with any liquid, metal, or other foreign matter inside the floppy disk drive or disk. Never disassemble your floppy disk drive. MEDIA CARE Caring for your Media (DVD/CD/CD-R) Media discs are precision devices and will function reli-
ably if given reasonable care. Always store your media disc in its case when it is not in use. Always handle discs by the edges and avoid touching the surface. Avoid storing any media discs in extreme temperatures. Do not bend media discs or set heavy objects on them. Do not spill liquids on media discs. Do not scratch media discs. Do not get dust on media discs. Never write on the label surface with a ballpoint pen or pencil. Always use a felt pen. If a media disc is subjected to a sudden change in tem-
perature, cold to warm condensation may form on the surface. Wipe the moisture off with a clean, soft, lint free cloth and let it dry at room temperature. DO NOT use a hair dryer or heater to dry media discs. If a disc is dirty, use only a DVD/CD cleaner or wipe it with a clean, soft, lint free cloth starting from the inner edge and wiping to the outer edge.
1 2 | users manual 3 | Users Manual | 1.84 MiB |
FCC ID: EJE-WB0031 (IC: 337J-WB0031) Report No. M050534_Cert_WM3B2200BG_BT APPENDIX H USER MANUAL (PART 3) This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au E Series.book Page 73 Wednesday, April 14, 2004 10:28 AM Caring for your Optical Drive Your optical drive is durable but you must treat it with care. Please pay attention to the following points:
The drive rotates the compact disc at a very high speed. Do not carry it around or subject it to shock or vibration with the power on. Avoid using or storing the drive where it will be exposed to extreme temperatures. Avoid using or storing the drive where it is damp or dusty. Avoid using or storing the drive near magnets or devices that generate strong magnetic fields. Avoid using or storing the drive where it will be subjected to shock or vibration. Do not disassemble or dismantle the optical drive. Use of a commercially available lens cleaner is recommended for regular maintenance of your drive. C a r e a n d M a i n t e n a n c e PC CARDS Caring for your PC Cards PC Cards are durable, but you must treat them with care. The documentation supplied with your PC Card will provide specific information, but you should pay attention to the following points:
To keep out dust and dirt, store PC Cards in their protective sleeves when they are not installed in your LifeBook notebook. Avoid prolonged exposure to direct sunlight or excessive heat. Keep the cards dry. Do not flex or bend the cards, and do not place heavy objects on top of them. Do not force cards into the slot. Avoid dropping cards, or subjecting them to excessive vibration. 73 E Series.book Page 74 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k 74 E Series.book Page 75 Wednesday, April 14, 2004 10:28 AM 7 Specifications 75 E Series.book Page 76 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k 76 E Series.book Page 77 Wednesday, April 14, 2004 10:28 AM Specifications T his section provides the hardware and environmental specifications for your Fujitsu LifeBook notebook. Spec-
ifications of particular configurations will vary. S p e c i f i c a t i o n s CO NFIGURATIO N LABEL There is a configuration label located on the bottom of your LifeBook notebook. (See Figure 2-7 on page 10 for location) This label contains specific information regarding the options youve chosen for your notebook. Following is an example label and information on how to read your own configuration label. Part Number Configuration ID C onfiguration P /N:
F P C P /N: F P C MXXXXX E 8020, P M 1.7G , XP P, DV D/C D-R W, 256M, 40G , WLAN, 15XG A AS WXXXXXXXXXXXX M odel #
Processor O perating System M edia Drive Har M emory d Drive Screen Size Communications Figure 7-1 Configuration Label M ICRO PRO CESSO R Intel Pentium M processor (Refer to the system label to determine the speed of your processor). CHIPSET
Intel 855GME I/O Controller Hub 4 Mobile (ICH 4-M) M EM O RY System Memory DDR 333 MH z SDRAM memory module. Two DIMM slots; upgradeable to 2 GB of total memory
(1 GB x 2) Cache Memory L2 on-die, 1 MB or 2 MB depending upon system configuration VIDEO Built-in color flat-panel T FT active matrix LCD display with simultaneous display capability Video Color and Resolution 15" T FT XGA model:
Internal: 1024 x 768 pixel resolution, 16M colors
External: 1600 x 1200 pixel resolution, 16M colors
Simultaneous Video: 1024 x 768, 16M colors. XGA, SVGA and VGA compatible 15 SXGA+ model:
Internal: 1400 x 1050 pixel resolution, 16M colors
External: 1600 x 1200 pixel resolution, 16M colors
Simultaneous Video: 1400 x 1050 pixel resolution, 16M colors Video RAM Intel 855GME video graphics chip with integrated 32-
bit 3D/2D gfx core with Accelerated Graphics Port
(AGP) support. Up to 64 MB shared video memory using Dynamic Video Memory Technology (DV MT ). AUDIO
Sigmatel ST9751T codec
Stereo headphone jack, 3.5 mm, 1 Vrms or less, minimum impedance 32 Ohms
Mono microphone jack, 3.5 mm, 100 mV p-p or less, minimum impedance 10K Ohms
Two built-in stereo speakers, 20 mm diameter M ASS STO RAGE DEV ICE O PTIO NS Hard Drive
5400 rpm: 40 GB, 60 GB, or 80 GB fixed hard drive, Ultra DMA 100, 2.5, 9.5 mm
4200 rpm: 40 GB or 30 GB fixed hard drive, Ultra DMA 100, 2.5, 9.5 mm Media Player Depending upon the configuration of your system, one of the following is installed.
CD Drive (modular 24x maximum), or,
Combo DV D/CD-RW Drive (modular 8x maximum DV D/24x maximum write, 10x maximum rewrite, 24x maximum read CD-RW combo drive), or,
Super-Multi DV D Drive (modular 4x DV D-R, 2x DV D-RW, 2.4x DV D+R, 2.4x DV D+RW, 2x DV D-
RAM, 8x DV D-ROM, 16x CD-R, 8x CD-RW, 24x CD-ROM) 77 E Series.book Page 78 Wednesday, April 14, 2004 10:28 AM LifeBoo k E8000 Noteb ook FEATURES Integrated Pointing Device
Touchpad pointing device with scroll button
Optional Quick Point cursor control button Communications Modem: Internal V.92 standard 56K fax/modem
(ITU V.90, 56K data, 14.4K fax) Gigabit LAN: Internal wired 10Base-T/100Base-Tx/
1000Base-T/Tx Ethernet LAN Wireless LAN:
Certain configurations of the Lifebook C1320 notebook have an optional Wireless LAN device installed. If you have an IntelPRO device installed, your system is classified as a Centrino product. If you have no wireless device or a Wireless LAN device other than IntelPRO, your system is classified as a Pentium M product. (For additional infor-
mation about the Wireless LAN device, refer to the Wireless LAN Users Guide on page 93).
C1320 Model: Integrated Intel PRO Set Wireless LAN
(802.11a+b/g), Wi-Fi-compliant
C1320D Model: Optional integrated Atheros Wireless LAN (802.11a+b/g), Wi-Fi-compliant
Optional Bluetooth device for wireless personal area network communication LifeBook Security/Application Panel The Application Launcher buttons on your LifeBook notebook default to the following applications:
Table 7-1 Application Launcher Defaults Button Label Button Function Default Application 1 2 3 4 Application A Notepad Application B Calculator Internet E-Mail Internet Explorer Netscape Messenger Theft Prevention Lock Lock slot for use with security restraint systems. The Kensington locking system is recommended. DEVICE PORTS On the LifeBook notebook:
PC Card slots for two Type I or Type II cards or one Type III card: PCMCIA Standard 2.1 with CardBus support
Memory Stick/SD Card slot
One 15-pin D-SUB connector for VGA external monitor (see Display specifications)
Three USB 2.0 (Universal Serial Bus) connectors for input/output devices
One serial port (RS-232, D-Sub 9-pin)
One parallel port (ECP, D-Sub 25-pin) 78
One IEEE 1394 (4-pin type) jack
One SPDIF jack
Infrared port (IrDA1.1, 4 Mbps max.)
One 7-pin video out jack
One modular modem (RJ-11) connector
One LAN (RJ-45) connector
Docking port (100-pin, to dock with port replicator)
One stereo headphone jack. (See Audio specifications)
One mono microphone jack. (See Audio specifications)
Embedded Smart Card Reader (requires third-party application)
Wireless LAN antenna with pre-installed on/off switch
Optional Bluetooth module with antenna On the Optional Port Replicator:
One 6-pin mini DIN PS/2 compatible connectors for external keyboard or mouse
One 25-pin D-SUB connector for parallel input/
output devices; Bi-directional, output only or ECP
One 15-pin D-SUB connector for VGA external monitor (see Display specifications)
One 9-pin D-SUB connector for RS-232C serial input/output devices
Four USB 2.0 (Universal Serial Bus) connectors for input/output devices
One LAN (RJ-45) connector
One DC In connector
One microphone In jack
One headphone jack
One Digital Video (DVI-D) 24-pin, female interface
One power/suspend/resume button KEYBOARD Built-in keyboard with all functions of 101 key PS/2 compatible keyboards.
Total number of keys: 84
Function keys: F1 through F12
Feature extension key: Fn
Two Windows keys: one Start key, one application key
Key pitch: 19 mm
Key stroke: 2.7 mm
Built-in Touchpad pointing device with left and right buttons and scroll button.
Built-in Palm Rest
Optional Quick Point cursor control button External Keyboard Support USB or PS/2-compatible (PS/2 compatible with Port Replicator only) External Mouse Support USB or PS/2-compatible (PS/2 compatible with Port Replicator only) POWER Batteries One 8-cell Lithium ion battery, rechargeable, 14.4V, 4800 mAh, 69.1 Wh E Series.book Page 79 Wednesday, April 14, 2004 10:28 AM Optional Flexible Bay battery: 6-cell Lithium ion battery, rechargeable, 10.8V, 3400 mAh, 41 Wh TeleAdapt 16' TeleCord Notebook Guardian Lock S p e c i f i c a t i o n s AC Adapter Autosensing 100-240V AC, supplying 19V DC, 4.22A, 80W to the LifeBook notebook, Fujitsu Model FPCAC33AP, which includes an AC cable. Power Management Conforms to ACPI (Advanced Configuration and Power Interface). DIMENSIONS AND WEIGHT Overall Dimensions Approximately 13.11"(w) x 11.22"(d) x 1.27/1.44(h)
(333 mm x 285 mm x 32.2/36.5 mm) Weights Approximately TBD with battery and weight saver. Approximately TBD with battery and DVD/CD-RW Combo drive. ENVIRONMENTAL REQUIREMENTS Temperature Operating: 41 to 95 F (5 to 35 C) Non-operating: 5 to 140 F (15 to 60 C) Humidity Operating: 20% to 85%, relative, non-condensing Non-operating; 8% to 85%, relative, non-condensing Altitude Operating: 10,000 feet (3,048 m) maximum POPULAR ACCESSORIES For ordering or additional information on Fujitsu accessories please visit our Web site at us.fujitsu.com/computers or call 1-877-372-3473. Memory Upgrades 256 MB SDRAM 512 MB SDRAM 1GB SDRAM Docking Port Replicator Power Main Lithium ion battery Battery Charger Auto/Airline Adapter AC Adapter PC Cards Wireless PC Card 4-in-1 Media Card Adapter Compact Flash Media Card Adapter Additional Accessories Wireless Keyboard and Mouse External USB Floppy Disk Drive Presentation Audio System IBM Modem Saver Carrying Cases Diplomat Backpack Director MobileMax Wheeled Case PRE-INSTALLED SOFTWARE Depending on your pre-installed operating system, your Fujitsu LifeBook notebook comes with pre-installed software for playing audio and video files of various formats. In addition there is file transfer software, virus protection software and Power Management software. The following list indicates the pre-installed software associated with your system. Adobe Acrobat Reader Drive Image Special Edition (DISE) EarthLink 5.0 Fujitsu HotKey LifeBook Security/Application Panel Symantec Norton AntiVirus 2004 (90-day free trial) Netscape 7.0 Quicken 2004 New User Edition Microsoft Works 7.0 LEARNING ABOUT YOUR SOFTWARE Tutorials All operating systems and most application software have tutorials built into them upon installation. We highly recommend that you step through the tutorial before you use an application. Manuals Included with your notebook you will find manuals for your installed operating system and other pre-installed software. Any manuals that are not included, are avail-
able online through the help system of the software. We recommend that you review these manuals for general information on the use of these applications. Adobe Acrobat Reader The Adobe Acrobat Reader, located in the Service and Support Software folder, allows you to view, navigate, and print PDF files from across all of the major computing platforms. Drive Image Special Edition (DISE) by PowerQuest DISE by PowerQuest provides a way to restore your computer if you experience a hard disk crash or other system failure. DISE is used to restore the factory image and restore the system to its original state. Earthlink 5.0 Software suite that allows you to connect with the Internet. 79 E Series.book Page 80 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Fujitsu HotKey Fujitsu HotKey allows you to control the display bright-
ness of your notebook in order to maximize battery life. Quicken 2004 New User Edition Quicken 2004 New User Edition by Intuit is a personal money management program. It has features such as portfolio management, account registries, on-line banking and bill paying features. This application is for new users who are using Quicken software for the first time. Full version upgrade information is available on line. LifeBook Security/Application Panel Software Your LifeBook notebook is pre-installed with software utilities that let you operate and configure your LifeBook Security/Application Panel. The Security Panel portion allows for password protection while the system is off or in Suspend mode. The Security Panel utilities are found under the Start menu, under Programs, then under LifeBook Security Panel. The Application Panel utilities are found under the Start menu, Settings/Control Panel, then Application Panel. To open the CD Player and Application Panel Help, select Start, Programs, LifeBook Application Panel. Norton AntiVirus 2004 Your system is preinstalled with a free 90-day trial version of Symantecs Norton AntiVirus 2003. Norton AntiVirus is a program designed to protect your Life-
Book notebook from computer viruses. It assists in the protection of the data currently residing on your hard disk from destruction or contamination. The 90-day trial version is activated upon your acceptance of soft-
ware license agreement. After 90 days, it will be neces-
sary to purchase a subscription from Symantec to download latest virus definitions. Netscape 7.0 Browser suite, including integrated E-mail accounts, instant messaging, address book, search, and other tools and plug-ins. Fujitsu Driver Update Utility The Fujitsu Driver Update (FDU) utility is pre-installed on your system. With FDU, you can choose to automati-
cally or manually go to the Fujitsu site to check for new updates for your system. (See Automatically Down-
loading Driver Updates on page 67 for more information). 80 E Series.book Page 81 Wednesday, April 14, 2004 10:28 AM 8 Glossary 81 E Series.book Page 82 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k 82 E Series.book Page 83 Wednesday, April 14, 2004 10:28 AM G l o s s a r y Glossary AC Adapter A device which converts the AC voltage from a wall outlet to the DC voltage needed to power your LifeBook notebook. Boot To start-up a computer and load its operating system from disk, ROM or other storage media into RAM. Bus An electrical circuit which passes data between the CPU and the sub-assemblies inside your LifeBook notebook. ACPI Advanced Configuration and Power Interface Byte 8 bits of parallel binary information. Active-Matrix Display A type of technology for making flat-panel displays which has a transistor or similar device for every pixel on the screen. AdHoc A name of a wireless LAN configuration. It is a type of communication using wireless cards only. Another type of communication is called Infrastructure
(using a wireless card and an access point). ADSL Asymmetric Digital Subscriber Line Technology for transporting high bit-rate services over ordinary phone lines. AGP Accelerated Graphics Port Graphics port specifically designed for graphics-inten-
sive devices, such as video cards and 3D accelerators. Auto/Airline Adapter A device which converts the DC voltage from an auto-
mobile cigarette lighter or aircraft DC power outlet to the DC voltage needed to power your LifeBook note-
book. BIOS Basic Input-Output System. A program and set of default parameters stored in ROM which tests and operates your LifeBook notebook when you turn it on until it loads your installed operating system from disk. Information from the BIOS is transferred to the installed operating system to provide it with information on the configuration and status of the hardware. Cache Memory A block of memory built into the micro-processor which is much faster to access than your system RAM and used in specially structured ways to make your overall data handling time faster. CardBus A faster, 32-bit version of the PC Card interface which offers performance similar to the 32-bit PCI architecture. CD-ROM Compact disk read only memory. This is a form of digital data storage which is read optically with a laser rather than a magnetic head. A typical CD-ROM can contain about 600MB of data and is not subject to heads crashing into the surface and destroying the data when there is a failure nor to wear from reading. Channel A radio frequency band used for communication between wireless cards and access points. CMOS RAM Complementary metal oxide semiconductor random access memory. This is a technology for manufacturing random access memory which requires very low levels of power to operate. COM Port Abbreviation for communication port. This is your serial interface connection. Command An instruction which you give your operating system. Example: run a particular application or format a floppy disk. Bit An abbreviation for binary digit. A single piece of information which is either a one (1) or a zero (0). Configuration The combination of hardware and software that makes up your system and how it is allocated for use. bps An abbreviation for bits per second. Used to describe data transfer rates. CRT Cathode Ray Tube. A display device which uses a beam of electronic particles striking a luminescent screen. It 83 E Series.book Page 84 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k produces a visual image by varying the position and intensity of the beam. DNS Domain Name System Data The information a system stores and processes. A function to control the association between the IP address and the name assigned to the computer. DC Direct current. A voltage or current that does not fluctuate periodically with time. Default Value A pre programmed value to be used if you fail to set your own. DHCP Dynamic Host Configuration Protocol A protocol used to automatically acquire parameters required for the communication, such as IP address. The sender of IP address is called a DHCP server, and the receiver is called a DHCP client. DIMM Dual-in-line memory module. DISE Drive Image Special Edition. A utility that allows you to restore the original factory image on your hard drive in the event of corruption or accidental erasure of files or applications. Disk A spinning platter of magnetic data storage media. If the platter is very stiff it is a hard drive, if it is highly flexible it is a floppy disk, if it is a floppy disk in a hard housing with a shutter it is commonly called a diskette. Disk Drive The hardware which spins the disk and has the heads and control circuitry for reading and writing the data on the disk. Diskette A floppy disk in a hard housing with a shutter. DMA Direct Memory Access. Special circuitry for memory to memory transfers of data which do not require CPU action. DMI Desktop Management Interface. A standard that provides PC management applications with a common method of locally or remotely querying and configuring PC computer systems, hardware and software compo-
nents, and peripherals. 84 If you do not know the IP address but if you know the computer name, you can still communicate to that computer. DOS Disk Operating System (MS-DOS is a Microsoft Disk Operating System). Driver A computer program which converts application and operating system commands to external devices into the exact form required by a specific brand and model of device in order to produce the desired results from that particular equipment. DVMT Dynamic Video Memory Technology A video memory architecture that increases the efficiency of the motherboard by using innovative memory utilization and direct AGP. ECP Extended Capability Port. A set of standards for high speed data communication and interconnection between electronic devices. Encryption Key (Network Key) Data encryption key used to encrypt message text and for computing message integrity checks. Data encryp-
tion protects data from unauthorized viewing. This device uses the same encryption key to encode and decode the data, and the identical encryption key is required between the sender and receiver. ESD Electro-Static Discharge. The sudden discharge of elec-
tricity from a static charge which has built-up slowly. Example: the shock you get from a doorknob on a dry day or the sparks you get from brushing hair on a dry day. Extended Memory All memory more than the 640KB recognized by MS-DOS as system memory. FCC Federal Communication Commission. E Series.book Page 85 Wednesday, April 14, 2004 10:28 AM G l o s s a r y Floppy Disk A spinning platter of magnetic data storage media which is highly flexible. GB Gigabyte. Hard drive A spinning platter of magnetic data storage media where the platter is very stiff. I/O Input/Output. Data entering and leaving your notebook in electronic form. I/O Port The connector and associated control circuits for data entering and leaving your notebook in electronic form. IDE Intelligent Drive Electronics. A type of control interface for a hard drive which is inside the hard drive unit. Class B - supports 65,000 hosts on each of 16,000 networks Class C - supports 254 hosts on each of 2 million networks The number of unassigned Internet addresses is running out, so a new classless scheme called CIDR is gradually replacing the system based on classes A, B, and C and is tied to adoption of IPv6. (credit: webopedia.com) IR An abbreviation for infrared. IrDA Infrared Data Association. An organization which produces standards for communication using infrared as the carrier. IRQ Interrupt Request. An acronym for the hardware signal to the CPU that an external event has occurred which needs to be processed. Infrared Light just beyond the red portion of the visible light spectrum which is invisible to humans. KB Kilobyte. Infrastructure A name of a wireless LAN configuration. This type of communication uses an access point. Another type of communication is called AdHoc. IP Address An identifier for a computer or device on a TCP/IP network. Networks using the TCP/IP protocol route messages based on the IP address of the destination. The format of an IP address is a 32-bit numeric address written as four numbers separated by periods. Each number can be zero to 255. For example, 1.160.10.240 could be an IP address. Within an isolated network, you can assign IP addresses at random as long as each one is unique. However, connecting a private network to the Internet requires using registered IP addresses (called Internet addresses) to avoid duplicates. The four numbers in an IP address are used in different ways to identify a particular network and a host on that network. Three regional Internet registries -- ARIN, RIPE NCC and APNIC -- assign Internet addresses from the following three classes. Class A - supports 16 million hosts on each of 126 networks LAN Local Area Network. An interconnection of computers and peripherals within a single limited geographic location which can pass programs and data amongst themselves. LCD Liquid Crystal Display. A type of display which makes images by controlling the orientation of crystals in a crystalline liquid. Lithium ion Battery A type of rechargeable battery which has a high power-
time life for its size and is not subject to the memory effect as Nickel Cadmium batteries. LPT Port Line Printer Port. A way of referring to parallel interface ports because historically line printers were the first and latter the most common device connected to parallel ports. MAC Address Media Access Control Address A unique physical address of a network card. For Ethernet, the first three bytes are used as the vendor code, controlled and assigned by IEEE. The remaining three bytes are controlled by each vendor (preventing 85 E Series.book Page 86 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k overlap), therefore, every Ethernet card is given a unique physical address in the world, being assigned with a different address from other cards. For Ethernet, frames are sent and received based on this address. MB Megabyte. Megahertz 1,000,000 cycles per second. Memory A repository for data and applications which is readily accessible to your LifeBook notebooks CPU. MHz Megahertz. MIDI Musical Instrument Digital Interface. A standard communication protocol for exchange of information between computers and sound producers such as synthesizers. Modem A contraction for MOdulator-DEModulator. The equipment which connects a computer or other data terminal to a communication line. Monaural A system using one channel to process sound from all sources. MPU-401 A standard for MIDI interfaces and connectors. MTU Maximum Transmission Unit The maximum data size that can be transferred at a time through the Internet or other networks. You can set a smaller MTU size to obtain successful communication, if you have difficulty transferring data due to the fact that the maximum size is too large. Norton AntiVirus Web-based software that protects you email, instant messages, and other files by removing viruses, worms, and Trojan horses. NTSC National TV Standards Commission. The standard for TV broadcast and reception for the USA. 86 Operating System A group of control programs that convert application commands, including driver programs, into the exact form required by a specific brand and model of micro-
processor in order to produce the desired results from that particular equipment. Partition A block of space on a hard drive which is set aside and made to appear to the operating system as if it were a separate disk, and addressed by the operating system accordingly. PCI Peripheral Component Interconnect Self-configuring PC local bus. Designed by Intel, PCI has gained wide acceptance as a standard bus design. PCMCIA PCMCIA is a trademark of the Personal Computer Memory Card International Association. The Personal Computer Memory Card International Association is an organization that sets standards for add-in cards for personal computers. Peripheral Device A piece of equipment which performs a specific function associated with but not integral to a computer. Examples: a printer, a modem, a CD-ROM. Pitch (keyboard) The distance between the centers of the letter keys of a keyboard. Pixel The smallest element of a display, a dot of color on your display screen. The more pixels per area the clearer your image will appear. POST Power On Self Test. A program which is part of the BIOS which checks the configuration and operating condition of your hardware whenever power is applied to your notebook. Status and error messages may be displayed before the operating system is loaded. If the self test detects failures that are so serious that operation can not continue, the operating system will not be loaded. PPPoE Point to Point Protocol over Ethernet. A protocol for Ethernet, using a Point-to-Point Protocol
(PPP), which is used for connection on the phone line. E Series.book Page 87 Wednesday, April 14, 2004 10:28 AM Program An integrated set of coded commands to your computers telling your hardware what to do and how and when to do it. Protocol Procedures and rules use to send and receive data between computers.
- Method of sending and receiving data
- Process used to handle communication errors Conditions required for communication are organized in procedures for correct transfer of information. RAM Random Access Memory. A hardware component of your LifeBook notebook that holds binary information
(both program and data) as long as it has the proper power applied to it. RAM Module A printed circuit card with memory and associated circuitry which allows the user to add additional memory to the computer without special tools. Reset The act of reloading the operating system. A reset erases all information stored in RAM. Restart See Reset. Resume To proceed after interruption. In your notebook this refers to returning to active operation after having been in one of the suspension states. ROM Read Only Memory. A form of memory in which infor-
mation is stored by physically altering the material. Data stored in this way can not be changed by your notebook and does not require power to maintain it. SDRAM Synchronous Dynamic Random Access Memory. Serial Port A connection to another device through which data is transferred one bit at a time on a single wire with any other wires only for control of the device not for transfer of data. SMART Self-Monitoring, Analysis and Reporting Technology
(SMART) is an emerging technology that provides near-
G l o s s a r y term failure predictions for hard drives. When SMART is enabled the hard drive monitors pre-determined drive attributes that are susceptible to degradation over time. If a failure is likely to occur, SMART makes a status report available so that the LifeBook notebook can prompt the user to back up the data on the drive. Natu-
rally not all failures are predictable. SMART predict-
ability is limited to those attributes which the drive can self-monitor. In those cases where SMART can give advance warning, a considerable amount of precious data can be saved. SRAM Static random access memory. A specific technology of making RAM which does not require periodic data refreshing. SSID Service Set Identifier Specifies which network you are joining. Some systems allow you to specify any SSID as an option so you can join any network. Standby To make inoperative for a period of time. Your LifeBook notebook uses various suspension states to reduce power consumption and prolong the charge of your battery. Status Indicator A display which reports the condition of some portion of your hardware. On your LifeBook notebook this is an LCD screen just above the keyboard. Stereo (audio) A system using two channels to process sound from two different sources. SVGA Super VGA. S-Video Super Video. A component video system for driving a TV or computer monitor. System Clock An oscillator of fixed precise frequency which synchro-
nizes the operation of the system and is counted to provide time of day and date. TCP/IP Transmission Control Protocol/Internet Protocol. A standard Internet protocol that is most widely used. 87 E Series.book Page 88 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k TFT Thin Film Transistor A technology for flat display panels which uses a thin film matrix of transistors to control each pixel of the display screen individually. UL Underwriters Laboratories An independent organiza-
tion that tests and certifies the electrical safety of devices. USB Universal Serial Bus. Standard that allows you to simultaneously connect up to 127 USB devices such as game pads, pointing devices, printers, and keyboards to your computer. VGA Video Graphics Array. A video display standard originally introduced by IBM with the PS/2 series of personal computers. VRAM Video Random Access Memory. A memory dedicated to video display data and control. WFM Wired for Management is Intels broad-based initiative to reduce the total cost of ownership (TCO) of business computing without sacrificing power and flexibility. Wi-Fi Compatible Wi-Fi (Wireless Fidelity) Identifies that the product has passed the interoperability test, supplied by the WECA
(Wireless Ethernet Compatibility Alliance), which guar-
antees the interoperability of wireless IEEE 802.11 LAN products. For more information on the Wi-Fi standard, go to the WECA Web site at: www.wirelessethernet.com. WLAN Wireless Local Area Network. A wireless interconnection of computers and peripherals within a single limited geographic location which can pass programs and data amongst themselves. Write Protect Prevent alteration of the binary state of all bits in a storage media. Example: all information on a device such as a floppy diskette; a block of space in a storage media such as a partition of a hard drive; a file or direc-
tory of floppy diskette or hard drive. XGA Extended VGA. Zip Drive A 100MB or 250MB read/write removable media disk drive. 88 E Series.book Page 89 Wednesday, April 14, 2004 10:28 AM Regulatory Information NOTICE Changes or modifications not expressly approved by Fujitsu could void this users authority to operate the equipment. FCC NOTICES Notice to Users of Radios and Television These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a partic-
ular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
n Reorient or relocate the receiving antenna. n Increase the separation between the equipment and receiver. n Connect the equipment into an outlet that is on a different circuit than the receiver. n Consult the dealer or an experienced radio/TV technician for help. Shielded interconnect cables must be employed with this equipment to ensure compliance with the pertinent RF emission limits governing this device. Notice to Users of the US Telephone Network This equipment complies with Part 68 of the FCC rules, and the requirements adopted by ACTA. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment; or a product identifier in the format US:AAAEQ##TXXXX. If requested, this information or number must be provided to the telephone company. This equipment is designed to be connected to the tele-
phone network or premises wiring using a standard jack type USOC RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. R e g u l a t o r y I n f o r m a t i o n The ringer equivalent number (REN) of this equipment is 0.0B as shown on the label. The REN is used to deter-
mine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local tele-
phone company. If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isnt practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facili-
ties, equipment, operations or procedures that could effect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to main-
tain uninterrupted service. If trouble is experienced with this equipment, for repair or warranty information, please refer to the manual or contact Fujitsu Computer Systems Corporation, Customer Service. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. The equipment cannot be used on public coin service provided by the telephone company. Connection to party line service is subject to state tariffs. (Contact the state public utility commission, public service commis-
sion or corporation commission for information). If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this computer does not disable your alarm equip-
ment. If you have any questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date an time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such busi-
ness, other entity, or individual. 89 E Series.book Page 90 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k DOC (INDUSTRY CANADA) NOTICES Notice to Users of Radios and Television This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment Regulations. CET appareil numrique de la class B respecte toutes les exigence du Rglement sur le matrial brouilleur du Canada. Notice to Users of the Canadian Telephone Network NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signi-
fies that registration was performed based on a Declara-
tion of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. Before connecting this equipment to a telephone line the user should ensure that it is permissible to connect this equipment to the local telecommunication facilities. The user should be aware that compliance with the certification standards does not prevent service degradation in some situations. Repairs to telecommunication equipment should be made by a Canadian authorized maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecom-
munication company cause to request the user to disconnect the equipment from the telephone line. NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is 0.0. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equiva-
lence Numbers of all the devices does not exceed five. For safety, users should ensure that the electrical ground of the power utility, the telephone lines and the metallic water pipes are connected together. Users should NOT attempt to make such connections themselves but should contact the appro-
priate electric inspection authority or elec-
trician. This may be particularly important in rural areas. 90 Avis Aux Utilisateurs Du Rseau Tlphonique Canadien AVIS: Le prsent matriel est conforme aux spcifica-
tions techniques dIndustrie Canada applicables au matriel terminal. Cette conformit est confirme par le numro denregistrement. Le sigle IC, plac devant le numro denregistrement, signifie que lenregistrement sest effectu conformment une dclaration de conformit et indique que les spcifications techniques dIndustrie Canada ont t respectes. Il nimplique pas quIndustrie Canada a approuv le matriel. Avant de connecter cet quipement une ligne tlpho-
nique, lutilisateur doit vrifier sil est permis de connecter cet quipement aux installations de tlcom-
munications locales. Lutilisateur est averti que mme la conformit aux normes de certification ne peut dans certains cas empcher la dgradation du service. Les rparations de lquipement de tlcommunications doivent tre eVectues par un service de maintenance agr au Canada. Toute rparation ou modification, qui nest pas expressment approuve par Fujitsu, ou toute dfaillance de lquipement peut entraner la compagnie de tlcommunications exiger que lutilisateur dcon-
necte lquipement de la ligne tlphonique. AVIS: Lindice dquivalence de la sonnerie (IES) du prsent matriel est de 0.0. LIES assign chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent tre raccords une interface tlphonique. La terminaison dune interface peut consister en une combinaison quelconque de dispositifs, la seule condition que la somme dindices dquiva-
lence de la sonnerie de tous les dispositifs nexcde pas 5. Pour assurer la scurit, les utilisateurs doivent vrifier que la prise de terre du ser-
vice dlectricit, les lignes tlphoniques et les conduites deau mtalliques sont con-
nectes ensemble. Les utilisateurs NE doivent PAS tenter dtablir ces connex-
ions eux-mmes, mais doivent contacter les services dinspection dinstallations lectriques appropris ou un lectricien. Ceci peut tre particulirement important en rgions rurales. R e g u l a t o r y I n f o r m a t i o n E Series.book Page 91 Wednesday, April 14, 2004 10:28 AM UL Notice This unit requires an AC adapter to operate. Use only UL Listed Class 2 Adapters with an output rating of 19 VDC, with a current of 3.16 A. AC Adapter output polarity:
The modem-to-telephone network con-
nection must be a line cord using a mini-
mum #26 AWG wire. For Authorized Repair Technicians Only n For continued protection against risk of fire, replace only with the same type and rating fuse. n Danger of explosion if Lithium (clock) battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dis-
pose of used batteries according to the manufacturers instruction. System Disposal LAMP(S) INSIDE THIS PRODUCT Hg CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE, OR FEDERAL LAWS. 91 E Series.book Page 92 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k 92 E Series.book Page 93 Wednesday, April 14, 2004 10:28 AM Appendix Integrated Wireless LAN* Users Guide
* Optional device 93 E Series.book Page 94 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k 94 E Series.book Page 95 Wednesday, April 14, 2004 10:28 AM FCC REGULATO RY INFO RM ATIO N Please note the following regulatory information related to the wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wire-
less LAN devices. T he energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones. Wireless LAN devices are safe for use by consumers because they operate within the guidelines found in radio frequency safety standards and recommendations. T he use of Wireless LAN devices may be restricted in some situations or environments, such as:
On board an airplane, or
In an explosive environment, or In situations where the interference risk to other devices or services is perceived or identified as harmful. In cases in which the policy regarding use of Wireless LAN devices in specific environments is not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the equipment. Regulatory I nformation/Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. T he manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution or attachment of connecting cables and equipment other than those specified by the manufacturer. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. T he manufacturer and its autho-
rized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines. T his device must not be co-located or operated in conjunction with any other antenna or transmitter. For Atheros and I ntel PRO Set Wireless LAN:
For operation within 5.15~5.25 GH z frequency range, it is restricted to indoor environments, and the antenna of this device must be integral. Federal Communications Commission statement T his device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) T his device may not cause interference, and, (2) This device must accept any interference, including interference that may cause undesired operation of this device. W I r e l e s s L AN U s e r s Gu i d e FCC Interference Statement T his equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. T hese limits are designed to provide reasonable protection against harmful interference in a residential installa-
tion. T his equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
1. 2. Reorient or relocate the receiving antenna. Increase the distance between the equipment and the receiver. 3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to. 4. Consult the dealer or an experienced radio/T V technician for help. FCC Radio Frequency Exposure statement T his equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. T his equipment should be installed and operated with a minimum distance of 20 cms from the WLAN antennas located on the top edge of the LCD screen. T he Bluetooth antenna is located on the right hinge of the LCD screen and is exempt from minimum distance criteria due to its low power. T he transmitters in this device must not be co-located or operated in conjunction with any other antenna or transmitter. Export restrictions T his product or software contains encryption code which may not be exported or transferred from the US or Canada without an approved US Department of Commerce export license. T his device complies with Part 15 of FCC Rules., as well as ICES 003 B / NMB 003 B. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorized by Fujitsu PC Corpora-
tion may invalidate the user's right to operate this equipment. Canadian Notice To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. H igh power radars are allocated as primary users of 5250 - 5350 MH z and 5650 - 5850 MH z and these radars cause interference and/or damage to LELAN(license exempt LAN) devices operating in these bands. 95 E Series.book Page 96 Wednesday, April 14, 2004 10:28 AM L i feBook E Serie s Notebo ok - Se ction F i ve Before Using the Wireless LAN This manual describes the procedures required to prop-
erly setup and configure the integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure it's correct operation. Keep this manual in a safe place for future reference.
Encoding of data is modulated using Direct Sequence Spread Spectrum (DSSS) and Complementary Code Keying (CCK) when the WLAN device is operating in IEEE 802.11b mode and Orthogonal Frequency Divi-
sion Multiplexing (OFDM) when operating in IEEE802.11a or IEEE802.11g mode. Wireless LAN Devices Covered by this Document
The WLAN device is Wi-Fi certified and operates at This document is applicable to systems containing one of the following two devices. Most of the procedures are identical. Sections that differ between the two devices have been noted in the text:
Intel PROSet Wireless LAN (WM3B2915ABG and WM3B2200BG)
Atheros Wireless LAN (WLL4070) If your system is an C1320, your wireless module is the Intel PROSet wireless LAN; if your system is an C1320D, your wireless module is the Atheros wireless LAN. Characteristics of the WLAN Device
The WLAN device is a Mini-PCI card attached to the mainboard of the mobile computer.
It is a dual-band radio that operates in two license-free RF bands, therefore eliminating the need to procure an FCC license to operate. It operates in the 2.4GHz Industrial, Scientific, and Medical (ISM) RF band. Additionally, the Atheros device operates in the lower and middle bands of the 5GHz Unlicensed National Information Infrastructure (UNII) bands.
The Atheros WLAN is capable of three operating modes, IEEE802.11a, IEEE802.11b and IEEE802.11g, wireless LAN standards governed by the IEEE (Insti-
tute of Electronics and Electrical Engineers). The Intel WLAN is capable of two operating modes, IEEE802.11b and IEEE802.11g. Figure 5-1. Ad Hoc Mode Network the maximum data transfer rate of 54 Mbps in IEEE802.11a or IEEE802.11g mode and 11 Mbps in IEEE802.11b mode.
The maximum communication range indoors is approximately 80 feet (25 meters). However, that range will increase or decrease depending on factors such as number of walls, reflective material, or inter-
ference from external RF sources.
The WLAN device supports the following encryption methods - WEP, TKIP, and AES encryption. WIRELESS LAN MODES USING THIS DEVICE Ad Hoc Mode
(See Figure 5-1)
"Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer fashion. That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the SSID, network authenti-
cation, and encryption key settings are identically configured on all computers in the Ad Hoc network. 96 E Series.book Page 97 Wednesday, April 14, 2004 10:28 AM Access Point (Infrastructure) Mode
(See Figure 5-2) Infrastructure mode refers to a wireless network archi-
tecture in which devices communicate with wireless or wired network devices by communicating through an Access Point. In infrastructure mode, wireless devices can communicate with each other or can communicate with a wired network. Corporate wireless networks operate in infrastructure mode because they require access to the wired LAN in order to access computers, devices, and services such as file servers, printers, and databases. How to Handle This Device The WLAN device comes pre-installed in your mobile computer. Under normal circumstances, it should not be necessary for you to remove or re-install it. The Oper-
ating System that your mobile computer comes with has been pre-configured to support the WLAN device. WIRELESS NETWORK CONSIDERATIONS The Intel WLAN device is a dual-mode wireless net-
work card (supports IEEE802.11b/g); the Atheros device supports IEEE802.11a/b/g. The Intel WLAN device operates in the 2.4GHz ISM band; the Atheros WLAN device also operates in the 5 GHz lower and middle UNII bands. The maximum range of the WLAN device indoors is typically 80 feet (25 meters). Please note that the max-
imum range you achieve may be shorter or longer than Figure 5-2. Access Point (Infrastructure) Mode Network W I r e l e s s L A N U s e r s G u i d e 80 feet, depending on factors such as access point transmit power, number and density of obstructions, or external RF interference. Microwave ovens will interfere with the operation of WLAN device as microwave ovens operate in the same 2.4GHz frequency range that IEEE802.11b/g devices operate in. Interference by microwaves does not occur with IEEE802.11a radio which operates in the 5 GHz RF band. Wireless devices that transmit in the 2.4GHz fre-
quency range may interfere with the operation of WLAN devices in IEEE802.11b/g modes. Symptoms of interference include reduced throughput, intermittent disconnects, and large amounts of frame errors. It is HIGHLY recommended that these interfering devices be powered off to ensure the proper operation of the WLAN device. DEACTIVATING THE WLAN DEVICE Deactivation of the WLAN device may be desired in certain circumstances (to extend battery life) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). Fujitsu mobile computers employ two methods with which to deactivate the WLAN device, 1) the Wireless On/Off Switch and 2) in Windows using the Intel PROSet Software or Atheros Client Utility software. Deactivation using the Wireless On/Off Switch The WLAN device can be deactivated quickly and effi-
ciently by toggling the Wireless On/Off Switch to the Off position. (Figure 5-3) Internet ADSL modem, cable modem, or similar Wired LAN Access Point*
Wireless LAN
*An optional hub for a wired LAN may be required depending upon the type of access point used. 97 E Series.book Page 98 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E S e r i e s N o t e b o o k - S e c t i o n F i v e The Wireless On/Off switch has no effect on non-Wire-
less LAN models. Wireless LAN On/Off Switch Figure 5-3. Wireless LAN On/Off Switch Location Deactivation using the Intel PROSet Software The WLAN device can also be deactivated in Windows using the Intel PROSet Software. The procedure to accomplish this:
1. 2. Click [Start]-> [Control Panel]. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View"
which can be found in the left frame of the Control Panel window. 3. Double-click on the Intel PROSet for Wireless icon which will execute the Intel PROSet application. 4. Select the General tab if it is not already selected. 5. Check the Off radio button next to "Switch radio:"
then click the [OK] button. Deactivation using Atheros Client Utility software 1. Click [Start] -> [Program Files] -> [Atheros] ->
Atheros Client Utility. 2. Choose Action and click Disable Radio. ACTIVATING THE WLAN DEVICE Activation of the WLAN device can be accomplished using the same methods as the deactivation process Using the Wireless On/Off Switch In Windows using the Intel PROSet Software or Atheros Software 98 E Series.book Page 99 Wednesday, April 14, 2004 10:28 AM Configuration of the WLAN Device W I r e l e s s L A N U s e r s G u i d e The WLAN Device can be configured to establish wire-
less network connectivity using one of the following tools:
Windows XP Wireless Zero Configuration (WZC) -
The WZC allows for multiple profile setup and sup-
port for most industry standard security solutions. Intel PROSet Software - The Intel PROSet Software allows for multiple profile setup and supports auto-
matic profile switching. Support for most industry standard security solutions as well as Cisco Compati-
ble Extensions (CCX) is contained in this software. Network Name - Also known as the SSID Network Key (WEP) - Required if using static WEP keys. Authentication Type - Open, Shared, WPA, or WPA-
PSK Procedure 1. Activate the WLAN device using the Wireless On/
Off Switch, the Intel PROSet software, or the Atheros Client Utility. 2. Click the [Start] button first and then [Control Atheros Client Utility - The Atheros Client Utility soft-
Panel]. ware allows for multiple profile setups and supports automatic profile switching. Support for most indus-
try standard security solutions, as well as Cisco Com-
patible Extensions (CCX), is contained in this software. FLOW OF OPERATIONS 1. Activate the WLAN Device (See Activating the WLAN Device on page 98 for more information). 2. Configure the Wireless Network parameters (See Configure Wireless Network Parameters on page 100 for more information). Enter the network name (SSID) Choose the appropriate WLAN architecture (Ad Hoc or Infrastructure) Choose Authentication method: Open, Shared, WPA, or WPA-PSK If using static WEP keys, enter static WEP key and choose key index. 3. Configure network settings (See Configure Net-
work Parameters on page 100 for more informa-
tion) TCP/IP settings Workgroup or Domain settings. CONFIGURATION USING WIRELESS ZERO CONFIGURATION TOOL This section explains the procedure to properly configure the WLAN device using the WZC. Pre-defined parameters will be required for this procedure. Please consult with your network administrator for these parameters:
3. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View"
which can be found in the left frame of the Control Panel window. 4. Double-click the Network Connections icon. A list of previously configured networks will be dis-
played. 5. Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu dis-
played. 6. Click the [Wireless Networks] tab. 7. Click [Refresh], then choose the correct SSID from the [Available Networks] window. Click [Config-
ure] and proceed to step 8. Please note that only wireless networks that broadcast their SSID will be displayed. If the SSID of the wireless network is not visible, you must manually add it. This can be accomplished by clicking [Add]
8. From within the Association tab configure the appropriate WLAN parameters. Please have ready the following parameters:
Network name (SSID) - ASCII string of up to 33 characters used by the WLAN to logically separate wireless networks. Authentication Type - Options include Open, Shared, WPA, or WPA-PSK Network Key - If Authentication Type is Open or Shared, choices are None or WEP. If Authentica-
tion Type is WPA or WPA-PSK, choices are WEP or TKIP. Ad Hoc Networks: All computers in an Ad Hoc network must be assigned with the same SSID and 99 E Series.book Page 100 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E S e r i e s N o t e b o o k - S e c t i o n F i v e the checkbox for the field [This is a computer to computer (ad hoc) network, wireless access points are not used.] must be checked. Access Point (Infrastructure) Networks: The SSID must be identical to the SSID of the access point(s) and the checkbox for the following field must be unchecked [This is a computer to computer (ad hoc) network wireless access points are not used.]
Refer to the access point manual, or contact your network administrator 9. Configure Wireless Network Key parameters (Net-
work Authentication and Encryption). a. Choose the Network Authentication method appropriate for your wireless LAN. Options include Open, Shared, WPA, and WPA-PSK. Ad Hoc Networks: Network Authentication settings must be identical for all computers in the Ad Hoc network. Access Point (Infrastructure Networks):
Network Authentication setting must be config-
ured to match the setting of the Access Point(s). Please contact your network administrator for this information. b. Choose the Encryption method appropriate for your wireless LAN. Options for Open or Shared Authentication are None or WEP. Options for WPA or WPA-PSK are WEP or TKIP. c. If using static WEP keys, clear the check mark from the [The key is provided for me automati-
cally] check box. If using an authentication method that uses dynamic WEP (e.g., WPA, WPA-PSK, 802.1x/EAP), the check box should remain checked. Please contact your network administrator for the correct settings. d. Static WEP keys (if applicable) are entered in the
[Network Key] box. Configuration of the
[Network Key] is not required if the [The key is provided for me automatically] check box is checked. Static WEP keys entered in ASCII code format will be either five characters (40-bit) or thirteen characters (104-bit) in length. Valid characters are 0 - 9, A - Z. Static WEP keys entered in hexadecimal code format will be either ten characters
(40-bit) or twenty-six characters (104-bit) in length. Valid characters are 0 - 9, A - F. Ad Hoc Networks: Assign the same net-work key to all the personal computers to be connected. 100 Access Point (Infrastructure) Networks:
Assign the identical network key that is programmed into the access point. Please contact your network administrator for this information. e. If using static WEP keys, confirm the Network key by re-entering the same data in the [Confirm network key:] field. f. The Key index used must be identical to the transmit key used in the Access Point or other wireless device. This is only applicable when static WEP keys are used. Please contact your network administrator for this information. 10. Access Point (Infrastructure) Networks Only: If the wireless network you are establishing connec-
tivity to implements an access control security mechanism, configuration of 802.1x parameters may be necessary. Please contact your network administrator for these settings. Configuration of these parameters is not applicable to home users. 11. Click [OK] to close the [Wireless Network] window which will cause the WLAN device to re-establish wireless network connectivity using the recently configured parameters. CONFIGURATION USING INTEL PROSET SOFTWARE This section explains the procedure to properly configure the WLAN device using the Intel PROSet Soft-
ware. Pre-defined parameters will be required for this procedure. Please consult with your network adminis-
trator for these parameters:
Network Name - Also known as the SSID Network Key (WEP) - Required if using static WEP keys. Authentication Type - Open, Shared, WPA, or WPA-
PSK Procedure 1. Activate the WLAN device using either the Wireless On/Off Switch or the Intel PROSet software. 2. Click the [Start] button first and then [Control Panel]. 3. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View"
which can be found in the left frame of the Control Panel window. 4. Double-click the icon [Intel PROSet] to execute the Intel PROSet Software. 5. From the General page, click the Networks tab. E Series.book Page 101 Wednesday, April 14, 2004 10:28 AM 6. Click the [Add] button. The General Settings dialog displays. 7. From the General page, click the Networks tab. 8. Click the [Add] button. The General Settings dialog displays. 9. Enter a profile name in the Profile Name field. 10. Enter the network SSID, in the Network Name
(SSID) field. 11. Click Infrastructure or Ad Hoc for the operating mode. 12. The Mandatory AP option is only used if Infra-
structure mode is selected. Use this option to con-
nect to a specific access point. Click the Mandatory AP button, enter the MAC address for the access point. Click OK to save the setting and return to the General Settings page. 13. If you are using Cisco CCX, click the Enable Cisco Client eXtentions option to enable Cisco CKIP data encryption on the Security Settings page. If you have checked the Cisco's "Mixed-Cell" box in the Advanced Setting, this option must also be checked. 14. Click Next. 15. Click the Security tab 16. Select Open, Shared, WPA, or WPA-PSK in the Network Authentication options. 17. Select either None, WEP, CKIP (if Enable Cisco Cli-
ent eXtentions is enabled on the General Settings page), or TKIP for the data encryption. W I r e l e s s L A N U s e r s G u i d e name and password of your current Windows user login. The "Server Identity" can be use the default setting. The "Client Certificate" should be the one obtained from your RADIUS server or other certifi-
cation server. 24. Click Close to save the settings. 25. From the General settings page, click the new pro-
file name shown in the Profile List. Use the up and down arrows to position the priority of the new profile in the priority list. 26. Click the Advanced button to set the network con-
nection preferences. 27. Click the Connect button to connect to the net-
work. 28. Click OK to close the Intel(R) PROSet for Wireless utility CONFIGURATION USING ATHEROS CLIENT UTILITY SOFTWARE This section explains the procedure to properly configure the WLAN device using the Atheros Client Utility. Pre-defined parameters will be required for this procedure. Please consult with your network adminis-
trator for these parameters:
Network Name - Also known as the SSID Network Key (WEP) - Required if using static WEP keys. Authentication Type - Open, Shared, WPA, or WPA-
PSK Procedure 18. If WEP is selected, select either 64 or 128-bit for the Encryption Level. 1. Activate the WLAN device using either the Wireless On/Off Switch or the Atheros Client Utility 19. Select the key index 1, 2, 3 or 4. 2. Click the [Start] button first and then [Control 20. Enter the WEP key if required. If your network does not employ a 802.1x/EAP security mechanism, please skip to step 24. 21. Click the 802.1x Enabled checkbox to enable the 802.1x security option. Please contact your network administrator if configuration of this setting is required. 22. Select the appropriate 802.1x/EAP Type. Please contact your network administrator if configura-
tion of this setting is required. 23. After selecting your authentication type, click the Configure button to open the Settings dialog. Enter the user name and password of the user you have created on the authentication server. The user name and password do not have to be the same as Panel]. 3. If the Control Panel is in Category view, switch to Classic view by clicking "Switch to Classic View"
which can be found in the left frame of the Control Panel window. 4. Double-click the icon [Atheros Client Utility] to execute the Atheros Client Utility. 5. 6. 7. From the Current Status page, click the Profile Management tab. If this is your first time using this utility, highlight the profile [Default] and Click the [Modify] button, otherwise Click the [New] button. The General Set-
tings dialog displays. From the General page, enter a profile name in the Profile Name field. 101 E Series.book Page 102 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E S e r i e s N o t e b o o k - S e c t i o n F i v e 8. Enter the network SSID, in the SSID1 field. If you wish to create a profile that can connect to up to 3 different wireless networks, SSID's can be entered in the SSID2 and SSID3 fields as well. 13. The Advanced tab allows for the configuration of the options detailed in the table below. Field Name Description Power Save Mode Network Type 802.11b Preamble Options are Maximum, Normal, or Off Options are AP (Infrastructure) or Ad Hoc Specifies the preamble setting in 802.11b. The default setting is Short and Long (Access Point mode), which allows both short and long headers in the 802.11b frames. Set to Long Only to override allowing short frames. Transmit Power Level Options are 100%, 50%, 25%, 12.5% or Lowest transmit power
(0mW) Wireless Mode Wireless Mode when Starting Ad Hoc Network Specifies 5 GHz 54 Mbps, 5 GHz 108 Mbps, 2.4 GHz 11 Mbps, or 2.4 GHz 54 Mbps operation in an access point network. Specifies 5GHz 54 Mbps, 5 GHz 108 Mbps, 2.4 GHz 11 Mbps, or 2.4 GHz 54 Mbps to start an Ad Hoc network if no matching network name is found after scanning all available modes. 14. Click OK 15. If the profile you just created does not activate immediately, click the Profile Management tab, highlight the desired Profile, and click Activate. 16. Click OK to close the Atheros Client Utility. 9. Click the Security tab. 10. The Security tab allows for the configuration of the Security modes listed in the table below. Please select the radio button of the desired security mode. If these settings are not known to you, please consult with your network administrator for the correct settings. Field Name Description WPA WPA-PSK 802.1x Pre-Shared Key Enables the use of Wi-Fi Protected Access. Choosing WPA opens the WPA EAP drop-down menu. Options include TLS and PEAP. If these settings are not known to you, please consult with your network administrator for the correct settings. Enables WPA-Pre-Shared Key. Click on the Configure button to enter the WPA Passphrase. If these settings are not known to you, please consult with your network administrator for the correct settings. Enables 802.1x security. If these settings are not known to you, please consult with your network administrator for the correct settings. Choosing this option opens the 802.1x EAP type drop-down menu. Options include TLS, PEAP, and LEAP Enables the use of pre-shared keys that are defined on both the access point and the station. This is where static WEP keys are entered. Click the Configure button to fill in the Define Pre-Shared Keys window. None No security 11. Click OK 12. Click the Advanced tab 102 E Series.book Page 103 Wednesday, April 14, 2004 10:28 AM CONNECTION TO THE NETWORK This section explains connection to the network. Following this operation, confirm the names of the computer and the workgroup as follows. W I r e l e s s L A N U s e r s G u i d e If there is an administrator of the network, contact the network administrator for data settings. Setting the network Perform the Setting TCP/IP and Confirming the computer and work group names operations required for network connection. Setting TCP/IP To change the setting of the IP address, you need to be logged in from Windows as an administrator. 1. Click the [Start] button first and then [Control Panel]. 2. If the Control Panel is in Category view, switch to Classic view by clicking Switch to Classic View under Control Panel the left frame. (If you are already in Classic view, Switch to Category View will be displayed.) 3. Double-click [Network Connections]. A list of cur-
rently installed networks will be displayed. 4. Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu dis-
played. The [Wireless Network Connection Proper-
ties] window will be displayed. 5. Click the [General] tab if it is not already selected. 6. Click [Internet Protocol (TCP/IP] and then click
[Properties]. The [Internet Protocol (TCP/IP) Properties] window will be displayed. 7. Set the IP address as follows:
For ad hoc connection: Select [Use the following IP address:] and then enter data for [IP address]
and [Subnet mask]. See page 109 for IP address setting. For access point (infrastructure) connection: If your network uses DHCP, select [Obtain an IP address automatically] and [Obtain DNS server address automatically]. If your network uses static IP addresses, consult with your network adminis-
trator for the correct IP address settings. 8. Click the [OK] button. Processing will return to the
[Wireless Network Connection Properties] window. 9. Click the [OK] button. 10. Close the [Network Connection] window. Confirming the computer and work group names To modify the computer name and/or the work group name, you need to be logged in from Windows as an administrator. 1. Click the [Start] button, then [Control Panel]. 2. If the Control Panel is in Category view, switch to Classic view by clicking Switch to Classic View under Control Panel the left frame. (If you are already in Classic view, Switch to Category View will be displayed.) 3. Double-click the [System] icon. The [System Prop-
erties] window will be displayed. 4. Click the [Computer Name] tab. 5. Confirm the settings of [Full computer name:] and
[Workgroup:]. a. The setting of [Full computer name:] denotes the name for identifying the computer. Any name can be assigned for each personal computer. To change the name, click [Change] and then proceed in accordance with the instruction messages displayed on the screen. Enter the desired name in less than 15 ASCII character code format. Identifiability can be enhanced by entering the model number, the user name, and other factors. b. [Workgroup name] is the group name of the network. Enter the desired name in less than 15 ASCII character code format. For ad hoc connection: Assign the same network name to all personal computers existing on the network. For access point (infrastructure) connection:
Assign the name of the work group to be accessed. 6. Click the [OK] button. If a message is displayed that requests you to restart the personal computer, click [Yes] to restart the computer. Setting the sharing function Set the sharing function to make file and/or printer sharing with other network-connected personal computers valid. This operation is not required unless the sharing func-
tion is to be used. 103 E Series.book Page 104 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E S e r i e s N o t e b o o k - S e c t i o n F i v e The folder and printer for which the sharing function has been set will be usable from any personal computer present on the network. 3. Right-click the work folder (or whichever folder you want to share), and then click [Sharing and Security...] in the menu displayed. The [Folder Name Properties] window will be displayed. To share a file and/or the connected printer, you need to be logged in as an administrator. Setting the Microsoft network-sharing service 1. Click the [Start] button first and then [Control Panel]. 2. If the Control Panel is in Category view, switch to Classic view by clicking Switch to Classic View under Control Panel the left frame. (If you are already in Classic view, Switch to Category View will be displayed.) 3. Double-click [Network Connections]. A list of cur-
rently installed networks will be displayed. 4. 5. Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu dis-
played. The [Wireless Network Connection Proper-
ties] window will be displayed. If [File and Printer Sharing for Microsoft Net-
works] is displayed, proceed to step 6. If [File and Printer Sharing for Microsoft Networks] is not dis-
played, skip to step 7. 6. Make sure that the [File and Printer Sharing for Microsoft Networks] check box is checked, and then click the [OK] button. Skip to Setting file-
sharing function. Setting the file-sharing function for the file which has been used to execute Network Setup Wizard is suggested on the screen. For the wireless LAN, however, since security is guaranteed by entry of the network name (SSID) and the network key, the steps to be taken to set the file-
sharing function easily without using Network Setup Wizard are given below. 4. Click [Sharing] if it isnt already selected. 5. Click the link stating If you understand the secu-
rity risks, but want to share files without running the wizard, click here. 6. Click Just enable file sharing and click [OK]. 7. Check the [Share this folder on the network] check box. To specify the corresponding folder as a read-only folder, select the [Read only]
checkbox under the General tab. 8. Click the [OK] button. The folder will be set as a sharable folder, and the display of the icon for the work. folder will change. Setting the printer-sharing function 7. Click [Install]. The [Select Network Component Type] window will be displayed. 1. Click the [Start] button first and then [Printers and FAX]. A list of connected printers will be displayed. 2. Right-click the printer for which the sharing func-
tion is to be set, and then click [Sharing] in the menu displayed. The property window correspond-
ing to the selected printer will be displayed. Setting the printer-sharing function when Network Setup Wizard has been executed is suggested on the screen. For the wireless LAN, however, since security is guaranteed by entry of the network name (SSID) and the network key, the steps to be taken to set the printer-sharing function without using Network Setup Wizard are laid down below. 8. Click [Service], then click the [Add] button. The
[Select Network Service] window will be displayed. 9. Click [File and Printer Sharing for Microsoft Net-
works] and then click the [OK] button. Processing will return to the [Wireless Network Connection Properties] window, and [File and Printer Sharing for Microsoft Networks] will be added to the list. 10. Click the [Close] button. Setting the file-sharing function The procedure for setting the file-sharing function follows, with the work folder in drive C: as an example. 1. Click the [Start] button first and then [My Com-
puter]. 2. Double-click [Local disk (C:)]. 104 E Series.book Page 105 Wednesday, April 14, 2004 10:28 AM 3. Click the [Sharing] tab. 4. Click [Share this printer]. 5. Enter the sharing printer name in [Share name]. 6. Click the [OK] button. Confirming connection After you have finished the network setup operations, access the folder whose sharing has been set for other personal computers. Also, confirm the status of the radio waves in case of trouble such as a network connection failure. In the case of access point (infrastructure) connection, enter the necessary data for the access point before confirming connection. Refer to the manual of the access point for the access point setup procedure. Connecting your personal computer to another personal computer 1. Click [Start] first and then [My Computer]. The
[My Computer] window will be displayed in the left frame. 2. Click [My Network Places] in the Other Places list. The window [My Network Places] will be dis-
played. 3. Click [View workgroup computers] under Network Tasks in the left frame. 4. Double-click the personal computer to which your personal computer is to be connected. The folder that was specified in Setting the file-sharing func-
tion on page 104 will be displayed. 5. Double-click the folder to be accessed. Confirming the status of the radio 1. Right-click the Intel PRO Wireless icon in the lower right corner of the screen. 2. Click [Open Intel PROSet for Wireless]. The Intel PROSet for Wireless window opens. 3. Contained within the General tab and the Details section (accessed by pressing the [Details] button), you will find the current operating status of the radio. (When the radio is turned off or the com-
puter is not yet connected, some of the conditions will not be displayed.) Network Name (SSID) Displays the Network Name (SSID) currently used by the radio. W I r e l e s s L A N U s e r s G u i d e Profile Name The current configuration profile is displayed. Mode Displays the current operating mode. [Infra-
structure (AP)] or [Ad Hoc] will be displayed. Security Displays the current security status of the profile being used:
None: No encryption used. WEP: WEP encryption algorithm used. CKIP: WEP encryption algorithm used. TKIP: WEP encryption algorithm used. Speed Displays the highest data rate of the associated access point in mega-bits-per-second (Mbps) until data transfer occurs. 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, or 54. 802.11b: 1, 2, 5.5, or 11. Band (Frequency) Displays the current band and frequency being used. Displays Out of Range if no band and frequency is displayed. Displays:
802.11g (2.4 GHz) or 802.11b (2.4 GHz) Channel Displays the current transmit and receive channel being used. 802.1x Protocol Displays Enabled if the profile uses 802.1x authentication. Default is Disabled. 105 E Series.book Page 106 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E S e r i e s N o t e b o o k - S e c t i o n F i v e Troubleshooting Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. Problem Possible Cause Possible Solution Unavailable network connection Incorrect network name (SSID) or network key Ad hoc connection: verify that the network names (SSIDs) and network keys (WEP) of all computers to be connected have been configured correctly. SSIDs and WEP key values must be identical on each machine. Access Point (Infrastructure) connection: set the network name (SSID) and network key to the same values as those of the access point. Set the Network Authentication value identically to that of the Access Point. Please consult your network administrator for this value, if necessary. For the method of setting network authentication, refer to the following page:Assigning parameters on page 100 Ad hoc connection: Retry connection after shortening the distance to the destination computer or removing any obstacles for better sight. Access Point (Infrastructure) connection: Retry connection after short-
ening the distance to the access point or removing any obstacles for better sight. To check the wave condition, refer to the following page: Confirming the status of the radio waves on page 105. Weak received signal strength and/or link quality The WLAN device has been deactivated or disabled Check if the wireless switch is turned ON. Also verify Disable Radio is not checked in Network setting window. Refer to Starting Transmis-
sion on page 98. The computer to be connected is turned off Check if the computer to be connected is turned ON. RF interference from Access Points or other wireless networks The use of identical or overlapping RF channels can cause interference with the operation of the WLAN device. Change the channel of your Access Point to a channel that does not overlap with the interfering device. Wireless network authentication has failed Re-check your Network Authentication, Encryption, and Security settings. Incorrectly configured security settings such as an incorrectly typed WEP key, a mis-configured LEAP username, or an incorrectly chosen authentication method will cause the LAN device to associate but not authenticate to the wireless network. Incorrectly configured network settings Recheck the configuration of your network settings. For the method of checking, refer to the following page:Connection to the Network on page 103. Incorrect IP address configuration This only applies to networks using static IP addresses. Please contact your network administrator for the correct settings. 106 E Series.book Page 107 Wednesday, April 14, 2004 10:28 AM Wireless LAN Glossary W I r e l e s s L A N U s e r s G u i d e Ad Hoc Mode MAC address (Media Access Control Address) Ad Hoc Mode refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Points. Connectivity is accomplished using only client devices in a peer-to-peer fashion. For details, refer to Ad hoc connection on page 96. A MAC address (also called an Ethernet address or IEEE MAC address) is the 48-bit address (typically written as twelve hexadecimal digits, 0 through 9 and A through F, or as six hexadecimal numbers separated by periods or colons, e.g., 0080002012ef, 0:80:0:2:20:ef) which uniquely identifies a computer that has an Ethernet interface. Channel MTU (Maximum Transmission Unit) Range of narrow-band frequencies used by the WLAN device to transmit data. IEEE802.11b/g - 11 channels, 22 MHz wide channels. DHCP (Dynamic Host Configuration Protocol) The maximum size of data which can be transmitted at one time in networks including the Internet. In an envi-
ronment whose maximum size of data is too large to correctly receive data, normal communications can be restored by setting the size of MTU to a smaller value. A protocol that provides a means to dynamically allocate IP addresses to computers on a local area network. Network key DNS (Domain Name System) A data query service that provides a mechanism with which to translate host names into Internet addresses. IEEE802.11a Wireless LAN standard that supports a maximum data rate of 54 Mbps. 802.11a devices operate in the 5 GHz lower and middle UNII bands. IEEE802.11b Wireless LAN standard that supports a maximum data rate of 11 Mbps. 802.11b devices operate in the 2.4 GHz ISM band. Access point Wireless network device used to bridge wireless and wired network traffic. IP address The logical 32-bit host address defined by the Internet Protocol that uniquely identifies a computer on a network. The IP address is usually expressed in dotted decimal notation. LAN (Local Area Network) A LAN or Local Area Network is a computer network (or data communications network) which is confined to a limited geographical area. Data that is used for encrypting data in data communi-
cation. The personal computer uses the same network key both for data encryption and decryption, therefore, it is necessary to set the same network key as the other side of communication. Network name (SSID: Security Set Identifier) When a wireless LAN network is configured, grouping is performed to avoid interference or data theft. This grouping is performed with Network name (SSID). In order to improve security, the network key is set allowing no communication unless Network name
(SSID) coincides with the network key. Open system authentication Null authentication method specified in the 802.11 stan-
dard that performs no authentication checks on a wire-
less client before allowing it to associate. PPPoE (Point to Point Protocol over Ethernet) A method of allowing the authentication protocol adopted in telephone line connection (PPP) to be used over an Ethernet. Protocol A procedure or rule of delivering data among computers. Ordered data communication is allowed by making all conditions required for communication including the method of data transmission/reception and actions upon communication errors into proce-
dures. 107 E Series.book Page 108 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E S e r i e s N o t e b o o k - S e c t i o n F i v e Shared key authentication 802.11 network authentication method in which the AP sends the client device a challenge text packet that the client must then encrypt with the correct WEP key and return to the AP. If the client has the wrong key or no key, authentication will fail and the client will not be allowed to associate with the AP. Shared key authentica-
tion is not considered secure, because a hacker who detects both the clear-text challenge and the same chal-
lenge encrypted with a WEP key can decipher the WEP key. SSID (Service Set Identifier) Service Set Identifier, a 32-character unique identifier attached to the header of packets sent over a WLAN that acts as a password when a mobile device tries to connect to the BSS. The SSID differentiates one WLAN from another, so all access points and all devices attempting to connect to a specific WLAN must use the same SSID. A device will not be permitted to join the BSS unless it can provide the unique SSID. Because the SSID is broadcast in plain text, it does not supply any security to the network. Subnet mask TCP-IP network is controlled by being divided into multiple smaller networks (subnets). IP address consists of the subnet address and the address of each computer. Subnet mask defines how many bits of IP address comprise the subnet address. The same value shall be set among computers communicating with each other. TCP/IP (Transmission Control Protocol/Internet Protocol) A standard protocol of the Internet. Wi-Fi Wi-Fi, or Wireless Fidelity, is a set of standards for wire-
less local area networks (WLAN) based on the IEEE 802.11 specifications. Certified products can use the official Wi-Fi logo, which indicates that the product is interoperable with any other product also showing that logo. 108 W I r e l e s s L A N U s e r s G u i d e E Series.book Page 109 Wednesday, April 14, 2004 10:28 AM IP address information IP addressing is much more complicated than can be briefly explained in this document. You are advised to consult with your network administrator for additional information. If IP address is unknown, set IP address as follows:
If you have an access point (DHCP server) on the network, set the IP address as follows:
[Obtain an IP address automatically]
A DHCP server is a server that automatically assigns IP addresses to computers or other devices in the network. There is no DHCP server for the AdHoc network. If the IP address is already assigned to the computer in the network, ask the network administrator to check the IP address to be set for the computer. If no access point is found in the network:
An IP address is expressed with four values in the range between 1 and 255. Set the each computer as follows: The value in paren-
theses is a subnet mask.
<Example>
Computer A: 192.168.100.2 (255.255.255.0) Computer B: 192.168.100.3 (255.255.255.0) Computer C: 192.168.100.4 (255.255.255.0)
Computer X: 192.168.100.254 (255.255.255.0) 109 E Series.book Page 110 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E S e r i e s N o t e b o o k - S e c t i o n F i v e Specifications Item Specification Type of network Transfer rate Active frequency Number of channels Security Atheros W LAN device conforms to IEEE 802.11a/ 802.11b/g
(W i-Fi based)*
Intel PRO Set W LAN device conforms to IEEE 802.11a/802.11b/g
(W M 3B2915ABG) and 802.11b/g(W M 3B2100BG)(W i-Fi based)*
(Automatic switching) IEEE 802.11a/g: 54 M bps maximum data rate IEEE 802.11b: 11 M bps maximum data rate 802.11b/g: 2400~2473 M Hz 802.11a: 4900 ~ 5850 M Hz 802.11a: 8 independent channels 802.11b/g: 11 channels, 3 non-overlapping channels Encryption Types - W EP, TKIP, AES* *
W PA 1.0 compliant Encryption Keylengths Supported: 64 bits, 128 bits, and 152 bits
(Atheros module using AES encryption only) M aximum recommended number of computers to be connected over wireless LAN (during ad hoc connection) 802.1x/EAP CCX 1.0 compliant 10 units or less * * *
* Wi-Fi based indicates that the interconnectivity test of the organization which guarantees the interconnectivity of wireless LAN (Wi-Fi Alliance) has been passed.
** Encryption with network key ( WEP) is performed using the above number of bits, however, users can set 40 bits/
104 bits after subtracting the fixed length of 24 bits.
*** Depending on practical environments, the allowable number of computers to be connected may be decreased. 110 E Series.book Page 111 Wednesday, April 14, 2004 10:28 AM W I r e l e s s L A N U s e r s G u i d e Using the Bluetooth Device T he Integrated Bluetooth module (UGXZ5-102A) is an optional device available for Fujitsu mobile computers. W HAT IS BLUETO O TH Bluetooth technology is designed as a short-range wire-
less link between mobile devices, such as laptop computers, phones, printers, and cameras. Bluetooth technology is used to create Personal Area Networks
(PANs) between devices in short-range of each other. W HERE TO FIND INFO RM ATIO N ABO UT BLUETO O TH T he Bluetooth module contains a robust Help users guide to assist you in learning about operation of the Bluetooth device. To access the Help file, click [Start] -> All Programs, and click on Toshiba. Select Bluetooth, then select Users Guide. For additional information about Bluetooth Technology, visit the Bluetooth Web site at: www.bluetooth.com. FCC Radiation Exposure Statement T his equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. T he transmitters in this device must not be co-located or operated in conjunction with any other antenna or transmitter. Canadian Notice To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. W arranty Users are not authorized to modify this product. Any modifications invalidate the warranty. This equipment may not be modified, altered, or changed in any way without signed written permission from Fujitsu. Unauthorized modification will void the equipment authorization from the FCC and Industry Canada and the warranty. 111 E Series.book Page 112 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E S e r i e s N o t e b o o k - S e c t i o n F i v e 112 E Series.book Page 117 Wednesday, April 14, 2004 10:28 AM Index A About This Guide . 1 AC adapter . 27 indicator . 11 plug adapters . 71 ACPI . 83 Active-Matrix Display . 83 Anti-theft lock slot . 8 Application Panel . 20 Auto/Airline Adapter . 27, 83 Automatically Downloading Driver Updates . 67 B Battery . 37 alarm . 37 bay . 10 care . 72 charging indicator . 12 cold-swapping . 38 conserving power . 32 dead . 60 faulty . 60 increasing life . 72 level indicators . 11 lithium ion battery . 37, 85 low . 37 problems . 60, 61 recharging . 37 replacing . 38 shorted . 38 suspend mode . 37 BIOS . 83 guide . 29 setup utility . 29 Bluetooth Using the Bluetooth Device . 116 Where to Find Information . 116 Boot . 83 Boot Sequence . 29 Built-in Speakers . 56 C Cache Memory . 83 I n d e x CD-ROM . 39, 83 problems . 56, 57 Centrino . 78 Clicking . 15 CMOS RAM . 83 Cold-swap . 18 Cold-swapping . 38 COMM Port . 83 Configuration Label . 10, 77 Connection using Atheros Client Utility . 104 Control . 40 Controls and Connectors . 6 Conventions Used in the Guide . 1 CRT . 83 Cursor . 15 Cursor Keys . 13 D DC Output Cable . 27 DC Power Jack . 27 Default Value . 84 Device Ports . 50, 78 DIMM . 45, 84 Disk care . 72 Display Panel . 6, 28 adjusting . 28 brightness . 28 closing . 28 latch . 6 opening . 28 power management . 28 problems . 62 Display Timeout . 33 DMA . 84 DMI . 84 Docking Port . 51 Dolby Headphone . 41 Double-Clicking . 15 Dragging . 16 CapsLock . 12 Drive Image Special Edition (DISE) . 66 CardBus . 83 Drivers and Application CD . 67 117 E Series.book Page 118 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k DVD drive access indicator . 12 tray release . 65 DVD/CD-RW combo . 39 DVD/CD-RW/CD-ROM access indicator . 12 DVD/CD-RW/CD-ROM drive problems . 56, 57 DVD-RAM . 39 E ECP . 84 Emergency tray release . 8 Error Messages . 64 Extended Memory . 84 External Floppy Disk Drive . 42 problems . 57 External Monitor Port . 7, 52 F FDU . 67 Flexible Bay . 8, 18 cold-swapping . 18 devices . 18 eject lever . 8 installing . 18 removing . 18 Floppy Disk ejecting . 42 formatting . 42 initializing . 42 loading . 42 preparing . 42 write protect . 42 Fujitsu Contact Information . 1 H Hard Disk Drive access indicator . 12 problems . 57 Hard Disk Timeout . 33 Headphone Jack . 7, 52 Hibernation Feature . 33 disable/enable . 33 I IDE . 85 Infrared Port . 9, 51 Internal LAN Jack . 50 IrDA . 51, 85 IRQ . 85 K Keyboard . 6, 13 cursor keys . 13 function keys . 13 numeric keypad . 13 problems . 58 windows keys . 13 L LAN (RJ-45) Jack . 9 LifeBook Security Application Panel buttons . 22 configuring . 22 deactivating . 23 deactivating and activating . 23 launching applications . 22 operating . 21 passwords . 20 uninstalling . 21 Fujitsu Driver Update utility . 67 LifeBook Security/Application Panel . 6 Fujitsu LifeBook storing . 71 traveling . 71 M Media Player Function Key F3 . 14 F4 . 14 F6 . 14 F7 . 14 F8 . 14, 17 F9 . 14, 17 FN . 14 care . 73 Control Panel . 40 loading . 39 removing . 40 Software . 39, 40 using . 41 Media player care . 73 Memory 118 E Series.book Page 119 Wednesday, April 14, 2004 10:28 AM capacity . 46 compartment . 10, 45 installing . 45 problems . 58 removing . 45, 46 upgrade module . 45 Microphone Jack . 7, 52 MIDI . 86 Modem . 8 problems . 58 Modem Jack . 50 Modem Result Codes . 65 Modular Devices . 18 installing . 18 removing . 18 Mouse problems . 58 MPU-401 . 86 N NTSC . 86 I n d e x Power AC adapter . 27 Auto/Airline adapter . 27 failure . 59, 60 indicator . 11 management . 32 off . 33 on . 29 problems . 61 sources . 27 Power Management . 32, 33 Power On Self Test . 29, 64 Power/Suspend/Resume Button . 6, 32 Pre-Installed Software . 79 Adobe Acrobat Reader . 79 BatteryAid . 79 Drive Image Special Edition (DISE) . 80 Fujitsu HotKey . 80 Intel SpeedStep . 80 LifeBook Application Panel . 80 manuals . 79 Netscape 6.01 . 80 Quicken New User Edition . 80 Numeric Keypad . 13 Preparation for wireless LAN connection (XP) . 99 NumLk . 12 PS/2 Port . 51 O Optical Drive . 39 P Parallel Port . 50, 86 problems . 58, 59 PC Card access indicator . 12 care . 73 installing . 43 problems . 59 removing . 43 slot . 7 PCMCIA . 86 Pointing Device See Touchpad . 15 Port Replicator . 47 attaching . 48 back panel components . 47 connector . 10 detaching . 49 problems . 57 POST . 86 R Registration . 30, 31 Restarting . 33 Restoring Your Pre-installed Software . 66 RJ-11 . 50 RJ-45 . 50 S ScrLk . 12 SDRAM . 10, 45 Security Indicator . 12 Security Panel . 20 Serial Port . 51, 87 problems . 58, 59 SMART . 87 Specifications . 77 Audio . 77 Chipset . 77 Dimensions and Weight . 79 Environmental Requirements . 79 Keyboard . 78 Memory . 77 119 IP address information . 114 Other settings . 108 Setting of power-saving function . 108 Specifications . 115 Starting Transmission . 98 Stopping transmission . 98 Troubleshooting . 109 Wireless LAN Glossary . 112 E Series.book Page 120 Wednesday, April 14, 2004 10:28 AM L i f e B o o k E 8 0 0 0 N o t e b o o k Microprocessor . 77 Power . 78 Video . 77 SRAM . 87 Status Indicator Panel . 6, 11 Stereo Line-in Jack . 52 Stereo Speakers . 6 Super-Multi DVD . 39 Super-Multi DVD drive . 39 Suspend . 87 Suspend Mode . 32 S-Video . 87 T Touchpad . 15 buttons . 15 controls . 16 Touchpad Pointing Device . 6 Troubleshooting . 55 U Universal Serial Bus Ports . 51 Unpacking . 5 USB . 51, 58 problems . 58, 59 USB 2.0 Ports . 8, 9 V Volume control . 17 W Warranty . 1 WFM . 88 Windows Windows XP Home . 1 Windows XP Professional . 1 Windows keys . 13 Application key . 13 Start keys . 13 Wireless LAN Ad Hoc Mode . 96 Before Using the Wireless LAN . 96 Broadcom Wireless LAN . 96 For better communications . 97 Infrastructure Mode . 97 Intel PROSet Wireless LAN . 96 120
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2005-06-14 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2005-06-14
|
||||
1 2 | Applicant's complete, legal business name |
Fujitsu Client Computing Limited (FCCL)
|
||||
1 2 | FCC Registration Number (FRN) |
0009379173
|
||||
1 2 | Physical Address |
1-1, Kamikodanaka 4-chome
|
||||
1 2 |
Nakahara-ku, Kawasaki, N/A 211-8588
|
|||||
1 2 |
Japan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
t******@timcoengr.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
EJE
|
||||
1 2 | Equipment Product Code |
WB0031
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
M****** U****
|
||||
1 2 | Title |
Engineer
|
||||
1 2 | Telephone Number |
+81-4********
|
||||
1 2 | Fax Number |
+81-4********
|
||||
1 2 |
u******@jp.fujitsu.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Lifebook C Series with WM3B2200BG 11BG WLAN & BT | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 | Power listed is conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
EMC Technologies Pty. Ltd.
|
||||
1 2 | Name |
M******** E******
|
||||
1 2 | Telephone Number |
617-3********
|
||||
1 2 | Fax Number |
617-3********
|
||||
1 2 |
b******@emctech.com.au
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0324000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0096000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC