all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Host User Manual | Users Manual | 2.92 MiB | ||||
1 2 | Cover Letter(s) | / January 06 2018 | ||||||
1 2 | Cover Letter(s) | / January 06 2018 | ||||||
1 2 | External Photos | |||||||
1 2 | Attestation Statements | / January 06 2018 | ||||||
1 2 | ID Label/Location Info | / January 06 2018 | ||||||
1 2 | Internal Photos | |||||||
1 2 | Cover Letter(s) | / January 06 2018 | ||||||
1 2 | RF Exposure Info | / January 06 2018 | ||||||
1 2 | RF Exposure Info | / January 06 2018 | ||||||
1 2 | RF Exposure Info | / January 06 2018 | ||||||
1 2 | RF Exposure Info | / January 06 2018 | ||||||
1 2 | Test Setup Photos | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | ID Label/Location Info |
1 2 | Host User Manual | Users Manual | 2.92 MiB |
Operating Manual System FUJITSU Tablet STYLISTIC Q Series Model: MQ10A Contact address in North America FUJITSU AMERICA INC. 1250 East Arques Avenue, Sunnyvale, CA 94085-3470, U.S.A. Telephone: 800 831 3183 or 408 746 6000
"http://solutions.us.fujitsu.com"
"http://solutions.us.fujitsu.com/contact"
Have a question? Email us at: "AskFujitsu@us.fujitsu.com"
Copyright 2018Fujitsu America, Inc.. All rights reserved FPC65-7889-01 FUJITSU Tablet STYLISTIC Q508 Operating Manual Declarations of conformity Fujitsu Contact Information Notational conventions Ports and controls Important notes First-time setup of your device Working with the Tablet PC Accessories for your Tablet PC
(optional) Security functions Connecting external devices Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturers notes Appendix Index 7 8 9 10 13 18 22 38 55 60 64 67 74 80 88 100 Copyright and Trademark Information Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu, the Fujitsu logo and STYLISTIC are registered trademarks of Fujitsu Limited or its subsidiaries in the United States and other countries. Intel and Intel Core are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. The ExpressCard word mark and logo are owned by the Personal Computer Memory Card International Association (PCMCIA) and any use of such marks by Fujitsu America, Incorporated is under license. Google is a trademark or registered trademark of Google Incorporated. Bluetooth is a trademark of Bluetooth SIG, Inc., USA. Adobe, Acrobat, and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other trademarks specified here are the property of their respective owners. Contents Contents 7 Declarations of conformity . Fujitsu Contact Information . 8 Notational conventions . 9 Ports and controls . 10 Important notes . 13 Safety instructions . 13 Additional safety notes for devices with wireless components . 14 Protecting the display screen . 14 Energy saving . 14 Energy saving under Windows . 14 Traveling with your Tablet PC . 15 Before you travel
. 15 Transporting the Tablet PC . 16 Cleaning the Tablet PC . 17 Further information on cleaning the Tablet PC . 17 First-time setup of your device . 18 Unpacking and checking the device . 18 Choose a location . 19 Connecting the AC adapter
. 19 Switching on the device for the first time . 20 Installing Bonus Apps . 21 Working with the Tablet PC . 22 Status indicators . 23 Switching the Tablet PC on . 24 Programing the ON/OFF button . 24 Switching the Tablet PC off
. 25 Handwriting recognition . 25 Touchscreen . 26 Select display orientation (portrait or landscape format)
. 26 Touch commands . 27
. 27 Using the stylus . 28 Stylus location . 29 Adjusting the stylus . 29 Replacing the stylus tip . 30 Calibrating the stylus . 30 Securing the stylus . 31 Tablet buttons . 32 Webcam . 33 Rechargeable battery . 33 Charging and maintaining the battery . 33 Using the power-saving functions . 34 Memory cards . 34 Supported formats . 34 Inserting the memory card . 35 Removing the memory card . 36 Calibrate the Digitizer for finger-based operation of the device. Fujitsu 3 Contents Keyboard cover (optional) Intermediary VESA Mount Plate (optional) TPU cover with shoulder strap (optional) Components of the keyboard cover Connecting the Tablet PC to the keyboard cover Disconnecting the Tablet PC from the keyboard cover Wireless LAN/Bluetooth wireless components . 36 Switching the wireless components on and off
. 36 Configuring WLAN access . 37 Further information on WLAN and Bluetooth . 37 Ethernet and LAN (docking cradle only) . 37 Accessories for your Tablet PC (optional)
. 38 Your docking cradle (optional) . 39 Cradle components . 39 Setting up the cradle . 40 Connecting the Tablet PC to the cradle . 40 Disconnecting the Tablet PC from the cradle . 42
. 43
. 43
. 44
. 45
. 46
. 47
. 47 Components of the TPU cover
. 47 Inserting the Tablet PC in the protective TPU cover Connecting the Tablet PC/TPU cover to the keyboard cover
. 49 Connecting the Tablet PC/TPU cover unit to the docking cradle . 52 Folio cover (optional)
. 53 Adapter cables . 54 Security functions . 55 Using the Security Lock (docking cradle only)
. 55 Configuring password protection in BIOS Setup Utility . 55 Protecting BIOS Setup Utility (supervisor password and user password)
. 56 Password protection for booting the operating system . 58 Password protection for the hard disk . 59 Activating hard disk protection . 59 Deactivating hard disk protection . 59 Connecting external devices . 60
. 60
. 61
. 61 Connecting USB devices . 62 How to remove USB devices correctly . 62 Connecting external audio devices . 63 Connecting headphones or other audio output devices . 63 Connecting a microphone or other audio input devices . 63 Settings in BIOS Setup Utility . 64 Starting the BIOS Setup Utility . 64 BIOS Setup Utility operation . 65 Exiting BIOS Setup Utility . 66 Exit Saving Changes - save changes and exit BIOS Setup Utility
. 66 Exit Discarding Changes - Reject changes and exit BIOS Setup Utility . 66 Load Setup Defaults load default values . 66 Discard Changes - Discard Changes without exiting BIOS Setup Utility . 66 Save Changes - save changes without exiting the BIOS Setup Utility . 66 Micro HDMI port HDMI Port (docking cradle only) VGA monitor port (docking cradle only) 4 Fujitsu Contents Save changes and power off
. 66 Troubleshooting and tips . 67 Executing a reset
. 68 Forced shutdown . 68 Execute a complete reset: Reset BIOS Setup to the standard values . 68 Help if problems occur . 68 Recovering your Factory Image . 68 The Tablet PCs date or time is incorrect
. 68 Battery charging indicator does not illuminate . 69 The Tablet PCs touchscreen remains dark . 69 The display on the Tablet PCs touchscreen is difficult to read. 69 The external monitor remains blank . 70 The external monitor is blank or the image is unstable . 70 The cursor does not correctly follow the stylus movements . 71 Stylus input not working . 71 The Tablet PC does not start after switch on . 71 The Tablet PC stops working . 71 The printer does not print
. 72 The wireless connection to a network does not work . 72 The battery discharges too quickly . 72 Error messages on the screen . 73 Technical data . 74 Tablet PC . 74 Screen resolutions for integrated screen and external screens . 75 WLAN specifications . 76 Rechargeable battery . 77 AC adapter (36 W) for the Tablet PC only (without cradle)
. 77
. 77 Docking cradle (optional)
. 78
. 78 Keyboard cover (optional)
. 78 Intermediary VESA Mount Plate (optional)
. 78 TPU cover with shoulder strap (optional)
. 78 Folio cover (optional)
. 79 Adapter cables (optional) Manufacturers notes . 80 Disposal and recycling . 80 Recycling your battery . 80 DOC (Industry CANADA) Notices . 81 UL Notice . 81 ENERGY STAR Compliance . 82 FCC and IC Regulatory Information . 83 Regulatory Notes and Statements . 83
. 86 Canadian Notice . 86 Avis pour le Canada . 87 Appendix . 88 Before Using the Optional Wireless LAN . 88 Wireless LAN Devices Covered by this Document . 88 Characteristics of the WLAN Device . 88 Wireless LAN Modes Using this Device . 89 AC adapter (65 W) for the docking cradle (optional) Canada, Industry Canada (IC) Fujitsu 5 Contents Deactivating/Disconnecting the WLAN Device . 91 Configuring the Wireless LAN . 92 Connection to the network . 92 Troubleshooting the WLAN . 93 Using the Bluetooth Device . 95 Image Backup and Recovery Procedures . 96 Windows 10 Procedures . 96 Creating a recovery drive . 96 Recovery options in Windows 10 . 96 Downloading driver updates . 99 Index . 100 6 Fujitsu Declarations of conformity Declarations of conformity DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name:
Address:
Telephone:
Declares that product:
Fujitsu America, Inc. 1250 E. Arques Avenue Sunnyvale, CA 94085
(408) 746-6000 Base Model Configuration: STYLISTIC Q508 Tablet PC Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.Model ref. of certification: MQ10A Declarationsofconformity This device complies with Part 15 of the FCC Rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation. 1 1 = Declaration of conformity Fujitsu 7 Fujitsu Contact Information Fujitsu Contact Information Service and Support You can contact Fujitsu Service and Support in the following ways:
Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.php"
Toll free phone: 1-800-8Fujitsu (1-800-838-5487) Before you place the call, have the following information ready so that the customer support representative can provide you with the fastest possible solution:
Product name Product configuration number Product serial number Purchase date Conditions under which the problem occurred Any error messages that have occurred Type of device connected, if any Fujitsu Shopping Online Please go to "http://www.shopfujitsu.com/store/ ". Maintaining Latest Conf guration To ensure that you always have the most current driver updates related to your system, occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view a list of the most current drivers, utilities and applications to determine whether you have the latest versions. If you have a Windows operating system, you will need to go to the Support Site to download the FSDM Utility: "http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS". Limited Warranty Your STYLISTIC Tablet PC is backed by a Fujitsu International Limited Warranty. Check the Limited Warranty Terms and Conditions Booklet that came with your Tablet PC. 8 Fujitsu Notational conventions Notational conventions Pay particular attention to text marked with this symbol. Failure to observe this warning will endanger your life, will damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings. Indicates important information which is required to use the device properly.
This style This style This style
"This style"
indicates an activity that must be performed indicates a result indicates data entered using the keyboard in a program dialogue or at the command line, e.g. your password (Name123) or a command used to start a program (start.exe) indicates information that is displayed on the screen by a program, e.g.:
Installation is complete. indicates indicates terms and texts used in a software interface, e.g.: Click on Save. names of programs or files, e.g. Windows or setup.exe. Cross-references to another section, e.g. "Safety information"
cross-references to an external source, e.g. a web address: For more information, go to "http://solutions.us.fujitsu.com/"
names of CDs, DVDs and titles or designations of other materials, e.g.:
"CD/DVD Drivers & Utilities"
Key This style indicates a key on the keyboard, e.g: F10 indicates terms and text that are emphasized or highlighted, e.g.: Do not switch off the device Fujitsu 9 Ports and controls Ports and controls This chapter presents the individual hardware components of your device. It gives an overview of the indicators and connections of the device. Please familiarize yourself with these items before you start to work with the device. Front 6 7 9 5 8 1 = Touchscreen 2 = Front webcam 3 = Ambient light sensor 4 = Webcam status LED (blue) 5 = Battery charging indicator 6 = Speakers (internal, not visible) 1 4 2 3 7 5 6 7 = Mechanical mount for keyboard cover / cradle 8 = Docking port 9 = Power-on indicator 10 Fujitsu Ports and controls Left-hand side 1 2 3 4 5 6 7 1 = Tether eyelet 2 = Combined headphones and microphone port (audio combo jack) 3 = USB 3.0 port (protected by cover) 4 = microHDMI port (protected by cover) Right side 5 = microSD card slot (protected by cover) 6 = Battery charging indicator (orange) 7 = DC input connector (DC IN)
(protected by cover) 1 2 1 = Stylus garage 2 = Tether eyelet Fujitsu 11 Ports and controls Rear 2 3 4 5 6 7 1 1 8 10 9 1 = Dual microphones 2 = Webcam status LED 3 = Rear webcam 4 = Webcam ash 5 = Shortcut button 6 = Volume +/-
7 = On/off button 8 = Fingerprint sensor 9 = Pen tether 10 = Pen garage 12 Fujitsu Important notes Important notes Importantnotes Notes This chapter contains essential safety information which must be followed when working with your Tablet PC. The other notes provide useful information about your Tablet PC. Safety instructions Safetyinformation Information, Please observe the following safety information. Please pay special attention to the sections in the manual marked with the symbol on the left. When connecting and disconnecting cables, observe the relevant notes in this operating manual. Read the information on the ambient conditions in the "Technical data", Page 74 chapter and the "First-time setup of your device", Page 18 chapter before preparing your tablet PC for use and switching it on for the first time. When cleaning the device, please observe the relevant notes in the section "Cleaning the tablet PC", Page 17. Please refer to the notes in the chapter "Removing and installing components during servicing", Page 77. When handling this device, you will come into contact with lead, a chemical which in California is held to be a possible cause of birth defects and other damage to fertility. Wash your hands after using the device. Do not place objects or apply heavy pressure on your computer Do not apply too much force to the display corners Do not rotate display with excessive force Do not pick up or hold the computer by display only Do not shake or bump the display Avoid excessive vibration and shocks Avoid excess force when tapping or writing on the screen Do not block the air vents Do not leave the computer turned on when enclosed in a briefcase or backpack In the event you drop your tablet PC or damage the housing in any way, immediately turn off power and disconnect the power plug. Failure to do so could result in a short circuit, smoke, and/or fire. Contact Fujitsu Service and Support to learn how to get the computer repaired. This Tablet PC complies with the relevant safety regulations for data processing equipment. If you have any questions about setting up your tablet PC in the intended environment, please contact your sales outlet or our Hotline/Service Desk. Fujitsu 13 Important notes Wirelesscomponents WirelessLAN Bluetooth,Safetynotes Additional safety notes for devices with wireless components If a wireless component (Wireless LAN, Bluetooth) is integrated in your Tablet PC, you must be sure to observe the following safety precautions when using your Tablet PC:
Switch off the wireless components when you are in an aircraft or driving in a car. Switch off the wireless components when you are in a hospital, an operating room or near a medical electronics system. The transmitted radio waves can impair the operation of medical devices. Switch off the wireless components, when you let the device get near flammable gases or into hazardous environments (e.g. gas station, paint stores), as the transmitted radio waves can cause an explosion or a fire. For further information on how to switch the wireless components on and off, refer to section "Switching the wireless components on and off", Page 36. Protecting the display screen Do not pour liquids on the system or wash it with a heavily soaked cloth. Do not place items on the top of the monitor in order to prevent it from being damaged. During normal use of the device, small particles from the environment can become embedded in the stylus tip and scratch the screen. The warranty does not cover a scratched screen. CAUTION: Do Not Lift or hold the computer by display/LCD panel. It can damage LCD panel due to excessive flex. Always lift/carry computer by holding the keyboard base with both hands Powersaving Notes Energy Energy saving If you will not be using your Tablet PC, switch it off. Switch off any connected external devices when they are not in use. If you use the energy-saving functions, the Tablet PC uses less power. If you do this, you will be able to work longer with the Tablet PC before having to recharge the battery. The energy efficiency is increased and environmental pollution is reduced. You save money and help protect the environment. Energy saving under Windows Make use of the available energy-saving functions as described in chapter
"Using the power-saving functions", Page 34. 14 Fujitsu Traveling with your Tablet PC Please follow the instructions below when traveling with your Tablet PC. Mobileoperation Notes Transportation TabletPC Important notes Before you travel Back up the important data of your internal storage. Switch off the wireless component for data security reasons. With data traffic via a wireless Tablet Traveling,tablet connection, it is also possible for unauthorized third parties to receive data. Information on activating data encryption is provided in the documentation for your wireless component. If you want to use your Tablet PC during a flight, ask the flight attendants to see if it is safe to use it. When traveling in other countries If you are traveling abroad, check that the AC adapter can be operated with the local AC voltage. If this is not the case, obtain the appropriate AC adapter for your Tablet PC. Do not use any other converter!
Check whether the local AC voltage and the AC cable are compatible. If this is not the case, buy an AC cable that suits the local conditions. Enquire with the appropriate government office of the country you will be travelling in as to whether you may operate the wireless component integrated in your Tablet PC there. Take the necessary travel adapters with you when traveling abroad. Check in the following table for which travel adapters you will need, or ask your travel organizer. Power connection Travel destination United States, Canada, Mexico, parts of Latin America, Japan, Korea, Philippines, Taiwan Russia and the Commonwealth of Independent States (CIS), much of Europe, parts of Latin America, the Middle East, parts of Africa, Hong Kong, India, much of south-east Asia United Kingdom, Ireland, Malaya, Singapore, parts of Africa China, Australia, New Zealand Fujitsu 15 Important notes Transporting the Tablet PC Protect the Tablet PC from severe shocks and extreme temperatures
(e.g. direct sunlight in a car). Do not transport your Tablet PC while it is turned on. Carry your Tablet PC with you while traveling. Do not check it in as baggage. Never put your Tablet PC through a metal detector. Have it hand-inspected by security personnel. You can however put your Tablet PC through a properly tuned X-ray machine. To avoid problems, place it close to the entrance of the machine and remove it as soon as possible or have it hand-inspected by security personnel. Security officials may require you to turn your Tablet PC on. So make sure you have a charged battery on hand for this. Switch the Tablet PC off. Unplug the AC plug of the AC adapter and all external devices from the power outlets. Disconnect the AC adapter cable and the data cables for all external devices. To protect against damaging jolts and bumps, use a suitable Tablet PC carrying case to transport your Tablet PC. 16 Fujitsu Cleaning the Tablet PC Important notes Do not clean any interior parts yourself; leave this job to a service technician. Only use detergents designed for computers. Normal household cleaners and polishes can damage the labels on the keyboard and the Tablet PC, the paintwork or the Tablet PC itself. Never use ammonia, acidic, or alkaline cleaners or organic chemicals such as paint thinner, acetone or kerosene. finishes and the coating of the LCD screen. Use of incorrect cleaners can result in optical impairment of the LCD and / or damage to the computer. Always refer to the cleaner manufacturers guidelines and material safety data sheets for proper handling and use of the products. Never use compressed air for cleaning your computer. Be very careful to avoid any liquid entering the ports or slots as this can damage the unit. It may damage surface Further information on cleaning the Tablet PC The touchscreen is very sensitive to scratches! Only clean the display surface with a very soft, slightly damp cloth. Switch the Tablet PC off. To prevent the device from being switched on unintentionally, remove the AC Reinigung Hinweise TabletPC Tastatur Touchpad Touchscreen plug of the AC adapter from the power outlet. The surfaces may be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. If the Tablet PC is exposed to water or other liquids, liquid can penetrate the Tablet PC and cause a malfunction. Do not continue to use the Tablet PC. Switch it off and contact our hotline / service desk (see enclosed list of service desks or visit our website at:."http://www.fujitsu.com/us/support/"). Fujitsu 17 First-time setup of your device First-time setup of your device First-timesetup Gettingstarted Please read the chapter "Important notes", Page 13. If your device is equipped with a Windows operating system, the necessary hardware drivers and supplied software are already pre-installed. Before switching it on for the first time, connect the device to the AC voltage using the AC adapter, see "Connecting the AC adapter", Page 19. The AC adapter must remain connected during the whole of the installation process. A system test is performed when your device is first switched on. Various messages can appear. The display may remain dark for a short time or may flicker. Please follow the instructions on the screen. NEVER switch off your device during the first-time setup process. The battery must be charged if you want to operate your device using the battery. When used on the move, the built-in battery provides the device with the necessary power. You can increase the operating time by using the available energy-saving functions. For instructions on how to connect external devices (e.g. mouse, printer) to your Tablet PC, please refer to the operating manual for your device. Unpacking and checking the device If you find that damage has occurred during transport, please notify your local sales outlet immediately!
Unpack all the individual parts. Check your device for any visible damage which may have occurred during transportation. Packaging Transport You may need to reuse the packaging in the future, for example if you need to ship your device. 18 Fujitsu First-time setup of your device Choose a location Choosealocation Setup ACadapter Choose a suitable location for the device before setting it up. so, please follow these instructions:
In doing Never place the device or the AC adapter on a heat-sensitive surface. The surface could be damaged as a result. Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can result in damage caused by overheating. The back of the device heats up during normal operation. Prolonged contact with skin can become unpleasant or even result in burns. Place the device on a stable, flat, non-slippery surface. Please note that the rubber feet of the device may mark certain types of delicate surfaces. Keep other objects at least 100 mm / 4 inches away from the device and its AC adapter to ensure adequate ventilation. Do not expose the device to extreme environmental conditions. Protect the device against dust, humidity and heat. Connecting the AC adapter Makingreadytouse ACadapter Observe the safety notes in the Safety section of this User's Guide. The supplied AC cable conforms to the requirements of the country in which you purchased your device. Make sure that the AC cable is approved for use in the country in which you intend to use it. Connect the AC cable (1) to the AC adapter. Plug the AC cable (2) into a power outlet. Connect the AC adapter cable (3) to the DC jack (DC IN) of the device. 3 1 2 Fujitsu 19 First-time setup of your device Switching on the device for the f rst time To make it easier to use your device for the first time, the operating system is pre-installed on the hard disk. Switchingonforthefirsttime 1 2 Press the ON/OFF button (2) for about one second to switch the device on.
The power-on indicator (1) lights up whenever the system is switched on. During the installation process, follow the on-screen instructions. You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com". 20 Fujitsu First-time setup of your device BonusApps Installing Bonus Apps The Fujitsu Bonus Apps utility can be accessed via the Start menu. In the Start menu, click on Fujitsu Extras. Double-click on the Application folder. Double-click on the shortcut Fujitsu BonusApps. In the dialog box User Account Control by clicking Yes confirm you wish to enter Fujitsu Bonus Apps. Select the applications you wish to install by selecting the checkbox adjacent to your selection. or Click Select All if you would like to install all available applications.
Applications that are already installed appear in grey, those that are available for installation appear in blue. To confirm your selection, click Install. Note that in some cases (depending upon which application was selected for installation) after installation completes, the system will prompt you to reboot. There are also cases in which if multiple applications are selected to install but one of them needs a reboot, the system will reboot and continue installing the rest of the selected applications. Fujitsu 21 Working with the Tablet PC Working with the Tablet PC Tablet,operation Tablet This chapter describes the basics for operating your Tablet PC. You can find instructions on how to connect external devices (e.g. mouse, flash storage) to the Tablet PC in the chapter "Connecting external devices", Page 60. Please refer to the notes in the chapter "Important notes", Page 13. 22 Fujitsu Working with the Tablet PC Status indicators The status indicators (1, 2, 3, 4) provide information about the statuses of the power supply and the rechargeable battery and the webcam. Statusindicators Symbols 2 3 4 1 No. 1 Status indicator 2, 3 4 Description Battery charging indicator Please note: If the AC adapter is connected when the state of charge of the battery is more than 95 %, charging will not be started. When the state of charge of the battery is less than 95 %, the battery will be charged to 100 % as soon as the AC adapter is connected. The indicator lights up orange: The rechargeable battery is charging. The indicator is not lit up: The battery is not charging
(the battery is already fully charged or the AC adapter is not connected). Webcam status LED (for front and rear webcam) The indicator lights up blue: The webcam is switched on while the Tablet PC is switched on. The indicator is not lit up: The webcam is switched off. Power-on indicator The indicator lights up white: The Tablet PC is switched on or in sleep mode. The indicator is not lit up: The Tablet PC is switched off. Fujitsu 23 Working with the Tablet PC Switching the Tablet PC on Tablet:Switchingon Power-onPower-onindicator Suspend/Resumebutton 1 2 Press the ON/OFF button (2) for about one second to switch the device on. Refer to chapter
"Switching on the device for the first time", Page 20 for more information.
The power-on indicator (1) lights up whenever the system is switched on. Programing the ON/OFF button You can program the ON/OFF button:
Operating system Windows 10 Menu Windows 10 Start - Control Panel - (Search Control Panel -) Power Options -Choose what the ON/OFF button does If you have assigned a password, you must enter this when requested to do so, in order to start the operating system. Detailed information can be found in the chapter "Security functions", Page 55. 24 Fujitsu Working with the Tablet PC Switching the Tablet PC off Back up your data and close all applications before you switch off your device. Otherwise data might be lost. Shut down the operating system correctly. If the Tablet PC does not switch itself off automatically, press the ON/OFF button for approx. five seconds. or Notebook A forced shutdown (reset) button is located on the left side of the system located next to the USB 3.0 port. To achieve the same effect as removing the battery, press the reset button. Handwriting recognition For detailed information on handwriting recognition, see the documentation for your operating system. At present, handwriting recognition on Windows supports the following languages:
English, German, French, Italian, Japanese, Korean, Chinese (traditional and simplified), Dutch, Portuguese, Spanish, Brazilian, Norwegian (Bokml and Nynorsk), Swedish, Finnish, Danish, Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian. On Windows you can set the required language under Control Panel Time, Language and Region Language.. Fujitsu 25 Working with the Tablet PC Touchscreen CAUTION: Do not lift or hold the computer by display/LCD panel. It can damage the LCD panel due to excessive flex. Always lift/carry computer by holding the keyboard base with both hands . Background lighting LCD screens are operated with background lighting. The luminosity of the background lighting can decrease over the period of use of the Tablet PC. However, you can set the brightness of your screen yourself. Ambient light sensor If your Tablet PC was shipped with the Windows operating system, the screen brightness is regulated by means of the ambient light sensor and depending on the respective light conditions. This results in optimum readability and longer battery life at the same time. If your Tablet PC was shipped with Windows 10, the adaptive brightness setting is activated. To change the ambient light sensor settings, select Control Panel - System and Security - Power Options
- Change plan settings - Change advanced power settings - Display - Enable adaptive brightness. Synchronizing the display on the touchscreen and an external monitor In Windows 10 you can proceed as follows to set the output type:
Look for the keyword "project". Swipe your finger across the screen starting from the right-hand edge. Select All settings... Look for the keyword "project". Select the required function. Select display orientation (portrait or landscape format) You can choose to use either portrait or landscape for the display, and the screen orientation should automatically adjust to the orientation of the tablet PC. You can change these settings underControl Panel - Hardware and Sound
- Windows Mobility Center / Rotate screen. In the settings there are profiles saved for operation with different screen orientations. These profiles have preset standard configurations that can be modified as desired These settings do not just affect the screen settings on the Tablet PC, but also on external monitors that are connected. 26 Fujitsu Working with the Tablet PC Touch commands You can execute certain commands by using your finger tip on the touchscreen of your device. Alternatively, everything which you can select or activate using your finger tip can also be selected or activated using the stylus. Calibrate the Digitizer for f nger-based operation of the device. You must calibrate your Tablet PC with your fingers before first usage, so that it recognises your fingertips as accurately as possible. As soon as you notice that the accuracy is deteriorating, you must recalibrate the device. Please note: There are separate calibration programs available for calibrating the stylus (device dependent) and for calibrating finger-based operation. Do not use the calibration tool for the stylus to calibrate finger-based operation. Operating system Windows 10 Menu To calibrate, run the Hardware and Sound / Tablet PC Settings function in the Control Panel. You need to calibrate both portrait and landscape formats. Fujitsu 27 Working with the Tablet PC Using the stylus Stylus 2 1 3 1 = stylus tip 2 = stylus button (right mouse button) 3 = eyelet for stylus tether You can use the stylus on your Tablet PC as an electronic writing tool, to select menu items and to navigate through the programs. Programs that support handwriting recognition also allow you to write directly on the screen with the stylus. You can also use the stylus as a drawing tool. The Tablet PC is supplied with a stylus tether which you can attach to the eyelets on the stylus and on the Tablet PC. Use only the stylus that was provided with your Tablet PC. Do not use any other pointed object as a substitute, that was not specially designed for your Tablet PC. Replace the stylus tip if it is worn. The warranty does not cover a scratched screen. While writing, take care that you do not scratch the surface of the display (e.g. with a wristwatch or bracelet). The stylus of the Tablet PC is an electronic instrument that can be damaged if used improperly. Handle the stylus with care. Our recommendations for proper handling of the stylus are as follows:
Do not gesture with the stylus. Do not use the stylus as a pointer. Do not use the stylus on surfaces other than the screen of the Tablet PC. Do not try to turn the grip of the stylus. The grip is used to put the stylus into its slot and to take it out of its slot. Never store the stylus with its weight on the tip (e.g. with the tip down in a stylus container). If the stylus is stored with the tip pointing down, this may have an adverse effect on the stylus mechanism (particularly under high temperatures). In this case the stylus tip may react as though it is constantly being pressed down. To avoid damage, the stylus should be stored in the stylus slot when not in use. The stylus can be influenced by electromagnetic fields (cursor quivers or jumps). There may be a few areas on the screen where the cursor quivers slightly in spite of pressing the stylus down firmly. 28 Fujitsu The screen responds to entries made with the tip of the finger or the stylus when the tip of the finger or the stylus directly touches the screen. You can use the stylus to perform almost all functions for which you would otherwise use a mouse. Delete functions are not supported by the stylus. Action Selecting menu items Starting programs Double-click with the left mouse Mouse Click with the left mouse button. Moving an object or window button. Drag with the left mouse button pressed. Opening a context menu Click with the right mouse button. Moving the cursor Move the mouse Working with the Tablet PC Stylus Tap on the menu entry with the tip of the stylus. Tap on the program symbol twice in rapid succession using the stylus tip. Place the stylus tip directly on the object or window. Keep the stylus tip held against the screen. Drag the desired object or window. Tap on the desired element with the stylus and keep the stylus pressed against the screen. Place the tip of the stylus directly on the screen. Stylus location To prevent the stylus from getting stuck in the stylus garage, always make sure to insert the stylus into the stylus garage in the correct direction (wide side of the stylus parallel with the Tablet display). On delivery, the stylus is located in the stylus garage:
Adjusting the stylus Menu Operating system Under Control Panel - Hardware and Sound - Pen and Touch you can make Windows 10 various settings for the stylus. 1 Fujitsu 29 Working with the Tablet PC Calibrating the stylus You must calibrate your Tablet PC with the stylus before first use, so that it recognizes the stylus as accurately as possible. You should also always repeat the calibration if the co-ordination between the stylus and the cursor movement deteriorates. Operating system Windows 10 Menu To calibrate, run the Hardware and Sound / Tablet PC Settings function in the Control Panel. You need to calibrate both portrait and landscape formats. 30 Fujitsu Working with the Tablet PC Securing the stylus Attach the stylus with a stylus tether to prevent accidentally dropping it or losing it. Your device has one eyelet on the left side and one eyelet on the right side for securing the stylus tether (see "Ports and controls", Page 10). The tether eyelet on the right side is shown below. Fasten the stylus tether to the stylus eyelet and to the eyelet on the Tablet PC. Fujitsu 31 Working with the Tablet PC Tablet buttons Your Tablet PC is fitted with three tablet buttons. 1 2 3 4 Symbol Description 1 On/Off button 2 Volume up button 3 Volume down button Shortcut button Functions Increase volume Increase the volume Decrease the volume Call the status area by pressing or start a screenshot function by a long press (depends on configuration) 32 Fujitsu Working with the Tablet PC Webcam Webcam Your device has two webcams: one on the front of the device and one on the rear. The webcam has its own status indicator. The indicator lights up when the webcam is active. Depending on the software used, you can use your webcam to take pictures, record video clips or take part in web chats. The picture quality depends on the lighting conditions and the software being used. You can only operate the webcam with a particular application (e.g. an Internet telephony program or a video conferencing program which supports a webcam). When using the webcam the support of the Tablet PC must not wobble. The webcam automatically adjusts itself to the current light level. For this reason, the touchscreen may flicker while the light level is adjusted. Further information on use of the webcam and additional settings for your webcam can be found in the help function of the program using the webcam. Battery Battery Servicelife,battery Rechargeablebattery Battery Rechargeable battery The built-in battery provides the Tablet PC with the necessary power for use on the move. You can increase the service life of the battery by caring for the battery properly. The average battery service life is around 500 charge/discharge cycles. You can extend the battery service life by taking advantage of the available energy-saving functions. Battery Battery Charging and maintaining the battery The Tablet PC battery can only be charged when the ambient temperature is between 5C / 41 F and max. 35C / 95F. You can charge the battery by connecting the Tablet PC to the AC adapter
(see "Connecting the AC adapter", Page 19). If the battery is running low you will hear a warning alarm. If you do not connect the AC adapter within five minutes of hearing the warning alarm, your Tablet PC will switch off automatically. Battery batterychargemeter Monitoring the battery state of charge A battery symbol for monitoring the battery capacity is displayed in the system bar /
status indicator. The battery symbol shows you the battery charge. Fujitsu 33 Working with the Tablet PC Using the power-saving functions The Tablet PC uses less power when the power-saving features are enabled. You will then be able to work longer when using the battery before having to recharge it. Energy Energy Battery The energy efficiency is increased and environmental pollution is reduced. By choosing the best power options, you can make significant savings and at the same time help protect the environment. Set the power-saving functions in your Control Panel. When the Tablet PC is in an power saving mode, you must remember the following:
During power-saving mode, open data is held in main memory or in a swap file on the hard disk. Never switch off the Tablet PC while it is in an energy saving mode. If the built-in battery is nearly drained, close all open files and do not go into power-saving mode. If you do not intend to use your Tablet PC for a long period of time:
Exit the power-saving mode if necessary via touching the screen or by switching on the Tablet PC. Close all opened programs and completely shut down the Tablet PC. Memory cards Your Tablet PC is equipped with an integrated storage card reader. Use storage cards to enlarge the storage of your Tablet PC. Slot Follow the manufacturers instructions when handling the memory cards. Memorycard Supported formats It supports the following formats:
Micro Secure Digital (SDTM Card) Micro SDHC Micro SDXC 34 Fujitsu Inserting the memory card Working with the Tablet PC 2 1 Open the slot cover (1). Carefully slide the storage card into the slot (2). The label area must be facing downward. Do not apply any force, otherwise the delicate contact surfaces could be damaged. Memorycard Close the slot cover. Fujitsu 35 Working with the Tablet PC Removing the memory card Memorycard To avoid any loss of data, always follow the correct procedure for removing the card (see the documentation for your operating system). Open the slot cover. 1 3 2 Press the edge of the memory card so that the memory card jumps slightly out of the slot (1). Pull the memory card out of the slot (2). Close the slot cover (3). SIM card A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a cellular phone or Tablet PC and, together with an integrated 4G module, enables access to a cellular radio network. Follow the instructions supplied by the provider of the SIM card. If you do not feel the the SIM card engage as you insert it, use a pointed object to insert the SIM card. Please note that the SIM card format must be micro-SIM (3FF). Other SIM card formats, such as full-size (1FF), mini-SIM (2FF) or nano-SIM (4FF) do not fit in the SIM card slot of your Tablet PC. Please do not insert any other format of SIM card as they may become twisted, they could even damage the system. 36 Fujitsu Working with the Tablet PC Inserting a SIM card 1 2 4 3 Open the slot cover (1). Remove the SIM card carrier from its location (2). Insert the SIM card (3) as shown on the SIM card carrier. Push the SIM card carrier back into its location (4). Close the slot cover. Wireless LAN/Bluetooth/4G/LTE wireless components The installation of wireless components not approved by Fujitsu will invalidate the certifications issued for this device. Switching the wireless components on and off The wireless components are switched on and off using the appropriate functions of the operating system. To switch wireless components on and off individually, select Settings
-Network & Internet - Airplane mode. 36.1 Fujitsu Working with the Tablet PC Conf guring WLAN access Requirement: A WLAN is available and you have the necessary access data on hand. Information on configuring WLAN access can be found in the documentation for your operating system. Further information on WLAN and Bluetooth For further information about WLAN or Bluetooth, please refer to the appendix of this Operating Manual. For WLAN specifications, see chapter "WLAN specifications", Page 76.
-Access via UMTS
-Access via Wireless
-WAN
-Access via 4G Ethernet and LAN (docking cradle only) The internal network module of your Tablet PC supports Ethernet LAN. You can use it to establish a connection to a local network (LAN = Local Area Network). EthernetLAN Connect the network cable to the LAN port of the cradle (1). Connect the network cable to your network connection (2). 1 2 Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Fujitsu 37 Accessories for your Tablet PC (optional) Accessories for your Tablet PC (optional) The following accessories are available for your Tablet PC:
Docking cradle for charging the Tablet PC with additional ports Keyboard cover with LAN port Intermediary VESA Mount Plate
(For Tablet PC models with VESA Shell (screw holes), an optional VESA mounting attachment, the Intermediary VESA Mount Plate, can be attached to the rear.) TPU cover with shoulder strap Folio cover Adapter cables (USB Type-C to HDMI, USB Type-C to microHDMI, Full USB to LAN) The following sections provide more information on handling the accessories. 38 Fujitsu Accessories for your Tablet PC (optional) Your docking cradle (optional) As well as fast charging, your docking cradle is a device that also allows you to quickly connect your Tablet PC to your peripherals such as a monitor, keyboard, mouse, etc. You only need to dock the Tablet PC to be able to work with your peripheral devices. Cradle components PortsPortsCradle 1 2 5 6 7 8 9 10 3 4 1 = Dock release button 2 = Docking port 3.0 3=USBport 4=USBport 3.0 3.0 5=USBport 6 = VGA monitor port 7 = HDMI Port 8 = LAN port 9 = Security Lock device 10 = DC jack socket (DC IN) With STYLISTIC Q508 the LAN port of the cradle supports Wake-on-LAN (G3 only). With STYLISTIC Q508 two additional external monitors can be connected either to the VGA monitor port or to the HDMI Port of the docking cradle. The simultaneous use of two external monitors is supported. (see "Screen resolutions for integrated screen and external screens", Page 75) Fujitsu 39 Accessories for your Tablet PC (optional) Setting up the cradle Select a suitable location for the cradle before setting it up. so, please follow these instructions:
In doing Place the cradle on a flat, stable, non-slippery surface. Never place the cradle or the AC adapter on a heat-sensitive surface. Do not expose the cradle to extreme environmental conditions. Protect the cradle from dust, moisture and heat. Connecting the Tablet PC to the cradle It is possible to connect the Tablet PC to the cradle while it is running. However, to prevent problems, we recommend that you switch the Tablet PC off first. Disconnect the AC adapter from the Tablet PC before connecting the Tablet PC to the cradle. When the Tablet PC is connected to the cradle, you must connect the AC adapter to the cradle, to be able to use all the cradles functions. Cradle Remove the AC plug of the AC adapter from the power outlet. Remove the AC adapter cable from the DC jack (DC IN) of the Tablet PC. 40 Fujitsu Accessories for your Tablet PC (optional) 2 1 3 4 Position the Tablet PC so that it lies against the storage surface of the cradle. Push the Tablet PC onto the cradle in the direction of the arrow (1) until you feel it engage on the connector and until the slide-out position returns to its original position. Your cradle is supplied with a separate AC adapter (19 V, 4.74 A). Make sure that you only use this AC adapter for the cradle. Plug the AC adapter cable into the DC jack (DC IN) on the cradle (2). Connect the AC cable to the AC adapter (3). Plug the AC cable into the power outlet (4). Fujitsu 41 Accessories for your Tablet PC (optional) Disconnecting the Tablet PC from the cradle It is possible to separate the Tablet PC from the cradle while it is running. 1 2 Press the slide-out button in the direction of the arrow (1) until remains in pressed position (red marking visible). it firmly While holding down the lower part of the cradle, lift the Tablet PC off the cradle in the direction of the arrow (2). 42 Fujitsu Accessories for your Tablet PC (optional) Keyboard cover (optional) The keyboard cover is an optimized device for the convenient input of text. only needs to be docked with the Tablet PC. It Components of the keyboard cover Keyboardcover Ports 1 2 1 = Release button 2 = Docking port for the Tablet PC Fujitsu 43 Accessories for your Tablet PC (optional) Connecting the Tablet PC to the keyboard cover Keyboardcover To prevent damage to the system, never fold the Tablet PC on the keyboard cover if the Tablet PC is in the TPU cover. Do not attach the optional keyboard cover to the tablet and carry both using the TPU cover. The keyboard cover and/or tablet could be damaged. 1 2 Press the release button (1) until it remains in the pressed position (red marking becomes visible). Push the Tablet PC onto the keyboard cover in the direction of the arrow, until you feel it engage on the connector (2) and until the release button returns to its original position. 44 Fujitsu Accessories for your Tablet PC (optional) Disconnecting the Tablet PC from the keyboard cover 1 2 Press the release button (1) until it remains in the pressed position (red marking becomes visible). Lift the Tablet PC away from the keyboard cover in the direction of the arrow (2). Fujitsu 45 Accessories for your Tablet PC (optional) Intermediary VESA Mount Plate (optional) The VESA mount kit includes the following parts: VESA mount and four M2.5XL5-1 screws. For Tablet PC models with VESA Shell (screw holes), an optional VESA mounting attachment, the Intermediary VESA Mount Plate, can be attached to the rear. Use the Intermediary VESA Mount Plate to secure the Tablet PC to a cart, counter, or stand with the corresponding screw holes, for example. The Intermediary VESA Mount Plate cannot be used in combination with the TPU cover with shoulder strap. Use the appropriate tool of the correct size when securing the screws. Keep the screws out of the reach of children. 1 1 1 1 3 3 3 2 3 Remove the covers from the screw holes on the rear of the Tablet PC (1). Position the Intermediary VESA Mount Plate on the Tablet PC (2). Make sure that the screw holes of the Intermediary VESA Mount Plate and of the Tablet PC lie exactly on top of each other. Secure the Intermediary VESA Mount Plate with the screws (3). 46 Fujitsu Accessories for your Tablet PC (optional) TPU cover with shoulder strap (optional) Components of the TPU cover The contents of the TPU cover with shoulder strap accessory option package are:
1. TPU Cover 2. Shoulder strap 3. Rubber stopper in plastic bag for use in combination with keyboard cover 4. Fujitsu warranty 5. Accessory User Guide Inserting the Tablet PC in the protective TPU cover Lay the TPU cover on the table. 1 2 Place the Tablet PC with the display side face up (1) and with the dock connection side forward into the corners of the TPU cover. Allow the Tablet PC to click into place in the TPU cover (2). Fujitsu 47 Accessories for your Tablet PC (optional) 3 3 a If required, secure the shoulder strap (3) at two of the four holders (a) of the TPU cover. Adjust the length of the shoulder strap. 48 Fujitsu Accessories for your Tablet PC (optional) Connecting the Tablet PC/TPU cover to the keyboard cover The rubber stopper prevents the unit (with TPU cover installed) from tipping over when the unit is docked on the keyboard cover. To install the rubber stopper:
Fold in the connector side of the keyboard cover. Remove backing paper from the adhesive strip on the rubber stopper. 1 2 3 Carefully align the rubber stopper (2) and apply rubber stopper into the support cavity (1) in the direction of the arrow (3). Apply finger pressure along the stopper to activate adhesive bonding process. Fold out the connector side of the keyboard cover. Fujitsu 49 Accessories for your Tablet PC (optional) 4 5 Press the release button (4) until it remains in the pressed position (red marking becomes visible). Push the Tablet PC/TPU cover unit onto the keyboard cover in the direction of the arrow, until you feel it engage on the connector (5) and until the release button returns to its original position. To prevent damage to the system, never fold the Tablet PC on the keyboard cover if the Tablet PC is in the TPU cover. Do not attach the optional keyboard to the Tablet PC and do not carry both using the TPU cover. The keyboard cover and/or Tablet PC could be damaged. 50 Fujitsu Accessories for your Tablet PC (optional) To disconnect the unit from the keyboard cover, proceed as described in section
"Disconnecting the Tablet PC from the keyboard cover ", Page 45. Fujitsu 51 Accessories for your Tablet PC (optional) Connecting the Tablet PC/TPU cover unit to the docking cradle 1 1 Position the Tablet PC/TPU cover unit so that it lies against the storage surface of the cradle. Carefully push the unit onto the cradle in the direction of the arrow (1) until you feel it engage on the connector and until the slide-out position returns to its original position. To disconnect the unit from the docking cradle, proceed as described in section
"Disconnecting the Tablet PC from the cradle ", Page 42. 52 Fujitsu Accessories for your Tablet PC (optional) Folio cover (optional) Do not attach the keyboard cover to your Tablet PC when using the folio cover. This folio cover contains magnets. Keep away any objects whose operation could be affected by magnets, such as heart pacemakers, swipe cards, etc. Note that the LCD screen may switch on unnoticed when touched if the device is in the folio cover. To prevent the device from falling out, make sure that the device is secured in the corresponding retainers of the folio cover. The folio cover is only designed for the safe storage and secure transportation of the device. Do not use the folio cover for other purposes. Keep the folio cover away from fire or heaters. Do not expose the folio cover to direct sunlight, high temperatures or moisture. 1 2 Place the Tablet PC with the display side face up (1) and with the dock connection side forward into the corners of the folio cover. Allow the Tablet PC to click into place in the folio cover (2). The following illustration shows you the many ways in which the folio cover can be used:
Fujitsu 53 Accessories for your Tablet PC (optional) Adapter cables 3 adapter cables are available for the device:
* USB Type-C to HDMI
* USB Type-C to microHDM For technical specifications, see chapter "Adapter cables (optional)", Page 79. 54 Fujitsu Security functions Security functions Securityfunctions Your Tablet PC has several security features that you can use to secure your system and your personal data from unauthorized access. This chapter explains how to use these functions, and what the benefits are. Please remember that in some cases, for example, forgetting your password, you may be locked out of the system and unable to access your data. Therefore, please note the following information:
Back up your data on external data carriers at regular intervals. Some security functions need you to choose passwords. Make a note of the passwords and keep them in a safe place. If you forget your passwords you will need to contact our Service Desk. Deletion or resetting of passwords are not covered by your warranty and a charge will be made for assistance. Conf guring the f ngerprint sensor The fingerprint sensor can record the image of a fingerprint. With additional fingerprint software, this image can be processed and used instead of a password. ngerprpriinnttssensensoror FFiinger 1 1 Install the fingerprint software to be able to use the fingerprint sensor (1). Fujitsu 55 Security functions ASeSenccti-uurrthiitteyyLLftpoorccokktection Using the Security Lock (docking cradle only) Your docking cradle (optional) is equipped with a Security Lock device for a Kensington Lock Cable. You can use the Kensington Lock Cable, a sturdy steel cable, to protect your docking cradle against theft. The Kensington Lock Cable is available as an accessory. Fit the Kensington Lock Cable to the fixture on your docking cradle. Conf guring password protection in BIOS Setup Utility Before using the various options for password protection in the BIOS Setup Utility, please proceed as follows to increase data security:
Make a note of the passwords and keep them in a safe place. If you forget your supervisor password you will not be able to access your Tablet PC. Passwords are not covered by your warranty and a charge will be made for assistance. Passwordprotection Your password can be up to 32 characters long and can contain letters and numbers. No distinction is made between uppercase and lowercase. Fujitsu 55.1 Security functions Protecting BIOS Setup Utility (supervisor password and user password) If you have opened these operating instructions on the screen, we recommend that you print them out. You cannot call up the instructions on the screen while you are setting up the password. BIOS SetupUtility The supervisor password and the user password both prevent unauthorized use of the BIOS Setup Utility. The supervisor password allows you to access all of the functions of the BIOS Setup Utility, while the user password will only give you access to some of the functions. You can only set up a user password if a supervisor password has already been assigned. Calling and using the BIOS Setup Utility is described in the chapter
"Settings in BIOS Setup Utility", Page 64. Assigning the supervisor and user passwords Start the BIOS Setup Utility and go to the Security menu. Select the Set Supervisor Password field and press the Enter key.
With Enter new Password: you are asked to enter a password. Enter the password and press the Enter key.
Conrm new Password requires you to confirm the password. Enter the password again and press the Enter key.
Changes have been saved is displayed as a confirmation that the new password has been saved. To set the user password, select Set User Password and proceed exactly as when configuring the supervisor password.
If you do not want to change any other settings, you can exit BIOS Setup Utility. In the Exit menu, select the option Save Changes & Exit. Select Yes and press the Enter key.
The Tablet PC is rebooted and the new password is effective. It will now be necessary to first enter your supervisor or user password in order to open the BIOS Setup Utility. Please note that the user password only provides access to a few of the BIOS settings. Password Supervisorpassword Userpassword Changing the supervisor password or user password You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password. Start the BIOS Setup Utility and go to the Security menu. When changing the password, proceed exactly as when assigning a password. Password Supervisorpassword Userpassword 56 Fujitsu Security functions Password Supervisorpassword Userpassword Removing passwords To remove a password (without setting a new password) perform the following steps:
Start the BIOS Setup Utility and go to the Security menu. Highlight the Set Supervisor Password or Set User Password field and press the Enter key.
You will be requested to enter the current password by the Enter Current Password prompt. Enter New Password will appear and you will be requested to enter a new password. Press the Enter key twice at this request. In the Exit menu, select the option Save Changes & Exit. Select Yes and press the Enter key.
The Tablet PC is rebooted and the password is removed. Removing the supervisor password simultaneously deactivates the user password. Fujitsu 57 Security functions Password protection for booting the operating system With the supervisor password you have set in the BIOS Setup Utility (see section "Assigning the supervisor and user passwords", Page 56), you can also prevent booting of the operating system. Operatingsystem Activating system protection Start the BIOS Setup Utility and go to the Security menu. Select the Password on Boot option and press the Enter key. Select the option you require (Disabled, First Boot or Every Boot) and press the enter key Operatingsystem If Disabled is selected, a password is not required, and you cannot protect the system (deactivates system protection). Select the Save Changes & Exit option under Exit.
The Tablet PC reboots. You will be prompted to enter your password (the supervisor password). Operatingsystem Deactivating system protection Start the BIOS Setup Utility and go to the Security menu. Select the Password on Boot option and press the Enter key. Select the Disabled option and press the Enter key.
If you do not want to change any other settings, you can exit BIOS Setup Utility. Select the Save Changes & Exit option under Exit.
The Tablet PC reboots. The system is no longer password-protected. 58 Fujitsu Security functions Password protection for the hard disk Passwordprotection The hard disk password prevents unauthorized access to the hard disk drives and is checked internally each time the system is booted. The condition for this is that you have assigned at least the supervisor password. Activating hard disk protection Call up the BIOS Setup and select the Security menu.
If you have not assigned BIOS passwords yet, define the supervisor and the user password now, if desired (see" Security functions", Page 55). Mark the Hard Disk Security field and press the Enter key. In the area Drive0, mark the field Set Master Password and press the Enter key.
Enter new Password then appears and you are asked to enter a password. Enter the password and press the Enter key.
Conrm new Password requires you to confirm the password. Enter the password again and press the Enter key.
With Setup Notice: Changes have been saved you receive confirmation that the new password has been saved. If you wish to enter a password for a second hard disk (Drive1), in the area Drive1 mark the field Set Master Password and proceed in exactly the same way as for the set up of the first hard disk (Drive0).
The field Password Entry on Boot is set to Enabled by default. You can exit the BIOS Setup once you have finished changing the settings. From the Exit menu, choose the option Exit Saving Changes. Press the Enter key and select Yes.
The Tablet PC reboots and your hard disk is now protected with a password. The password prompt is enabled as soon as the Tablet PC has rebooted. Deactivating hard disk protection To cancel a password (without setting a new password) proceed as follows:
Call up the BIOS Setup and select the Security menu. Mark the Hard Disk Security field and press the Enter key. In the area Drive0, mark the field Set Master Password and press the Enter key.
With the prompt Enter current Password you are first asked to enter the old password again. With Enter new Password you are then prompted to enter a new password. After the request, press the Enter key three times. From the Exit menu, choose the option Exit Saving Changes. Press the Enter key and select Yes.
The Tablet PC reboots and there is no longer any password protection for this hard disk. If you wish to remove a password for a second hard disk (Drive1), in the area Drive1 mark the field Set Master Password and proceed in exactly the same way as for the removal of the first hard disk (Drive0). Fujitsu 59 Connecting external devices Connecting external devices Under all circumstances, please observe the safety notes provided in the
"Important notes", Page 13 chapter before connecting or disconnecting any devices to or from your Tablet PC. Always read the documentation supplied with the device you wish to connect. Never connect or disconnect cables during a thunderstorm. Never pull at a cable when disconnecting it. Always grasp the plug. With some devices, such as USB devices, it is not necessary to switch off the Tablet PC and the device before connecting/disconnecting. For more information about whether or not devices need to be switched off, please refer to the documentation supplied with your external device. Some of the external devices require special drivers (see the operating system and external device documentation). 60 Fujitsu Connecting external devices DisplayPort HDMI Port (docking cradle only) The HDMI Port of the docking cradle can be used to connect a monitor, an LCD TV or a plasma TV with a corresponding connection. Connect the data cable to the external device. Connect the data cable to the HDMI Port of the cradle. VGA monitor port (docking cradle only) An analog monitor is connected to the analog VGA monitor port. Screen output is limited to a maximum of two screens at the same time. Monitor VGAport Screenconnection Monitorconnection Switch off the Tablet PC and the external monitor. Plug the data cable of the external monitor into the monitor port. First switch on the external monitor and then switch on the Tablet PC. You can also switch back and forth between the external monitor and the LCD screen of the Tablet PC, see "Touchscreen", Page 26. You can display the same image on the external monitor and on the LCD screen of the Tablet PC at the same time. Fujitsu 61 Connecting external devices Connecting USB devices On the USB ports you can connect external devices that also have a USB port
(e.g. a DVD drive, a printer, a scanner or a modem). USBports USB devices are hot-pluggable. This means you can connect and disconnect the cables of USB devices while the operating system is running. USB 1.x has a maximum data transfer rate of 12 Mbps. USB 2.0 has a data transfer rate of up to 480 Mbps. USB 3.0 has a data transfer rate of up to 5 Gbps. USB 3.1 has a data transfer rate of up to 10 Gbps. Additional information can be found in the documentation for the USB devices. Connect the data cable to the external device. Connect the data cable to a USB port on the Tablet PC or cradle. USB Type C 3.1 is a charging port with its own USB charging icon (USB +
Battery) Device drivers USB devices will be automatically recognized and installed by your operating system. How to remove USB devices correctly Always correctly remove the device according to the rules described below, to ensure that none of your data is lost. Tap the symbol for safe removal of the hardware. Select the device you wish to shut down and remove. Tap OK.
Wait for the dialog box which tells you that it is now safe to remove the device. 62 Fujitsu Connecting external devices Connecting external audio devices Your Tablet PC is equipped with one combined headphones and microphone port, while your docking cradle (optional) has separate ports for connecting headphones and microphone. Connectingaudiodevices Audioports Connectingheadphones Connecting headphones or other audio output devices The combined headphones and microphone port of your Tablet PC or the headphones port of your docking cradle (optional), allows you to connect output devices such as., headphones, external speakesr etc., to your Tablet PC. Connect the audio cable to the external device. Connect the audio cable to the combined headphones and microphone port of the Tablet PC or to the headphones port of your docking cradle (optional).
The internal speakers are disabled. If you purchase a cable from a retailer, please note the following information:
The combined headphones and microphone port on your Tablet PC is a "3.5 mm jack socket". If you want to connect headphones or a speaker you will need a "3.5 mm jack plug". Audiodevices,connecting Audioports Microphone,connecting Connecting a microphone or other audio input devices The combined headphones and microphone port of the Tablet PC or the microphone port of the docking cradle (optional) allows you to connect an external microphone, a MiniDisc player, MP3 player, CD player or a tape deck to your Tablet PC. Connect the audio cable to the external device. Connect the audio cable to the combined headphones and microphone port of the Tablet PC or to the microphone port of your docking cradle (optional). Fujitsu 63 Settings in BIOS Setup Utility Settings in BIOS Setup Utility BIOS SetupUtility Systemsettings,BIOSSetupUtility Configuration,BIOSSetupUtility SetupConfiguringsystem Configuringhardware To navigate more easily in the BIOS Setup Utility, you can use an external USB keyboard. The BIOS Setup Utility allows you to set the system functions and the hardware configuration for the Tablet PC. When the Tablet PC is delivered, the default settings are effective. You can change these settings in the menus of the BIOS Setup Utility. Any changes you make take effect as soon as you save and exit the BIOS Setup Utility. The BIOS Setup Utility program contains the following menus:
Info System Advanced Displays information relating to the BIOS, processor and Tablet PC Advanced system settings Configuration of various hardware components, such as mouse, keyboard, processor Password settings and security functions Configuration of the start-up sequence Exits the BIOS Setup Utility Security Boot Exit Starting the BIOS Setup Utility Press the Volume Down button before switching on the Tablet PC. If a password has been assigned, enter the password and press the Enter key. BIOSSetupUtility If you have forgotten the password, contact your system administrator or contact our customer service center. The BIOS Setup Utility starts. 64 Fujitsu Settings in BIOS Setup Utility BIOS Setup Utility operation BIOS SetupUtility Press the F1 key to display help about operation of the BIOS Setup Utility. The description of the individual settings is shown in the right-hand window of the BIOS Setup Utility. With the F9 key you can load the default settings of the BIOS Setup Utility. Use the cursor keys or to select the menu you wish to access to make changes.
The menu is displayed on the screen. Select the option you want to change with the cursor keys or Press the "Enter" key. Press the ESC key to exit the selected menu. For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu 65 Settings in BIOS Setup Utility Exiting BIOS Setup Utility You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
BIOS SetupUtility Exit Saving Changes - save changes and exit BIOS Setup Utility To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes.
The Tablet PC is rebooted and the new settings come into effect. Exit Discarding Changes - Reject changes and exit BIOS Setup Utility To discard the changes, select Exit Discarding Changes and Yes.
The settings which were valid when BIOS Setup Utility was called remain effective. The BIOS Setup Utility ends and the Tablet PC is rebooted. Load Setup Defaults load default values To copy the standard entries for all menus of the BIOS Setup Utility, choose Load Setup Defaults and Yes. Discard Changes - Discard Changes without exiting BIOS Setup Utility To discard the changes you have made, select Discard Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective. You can now make additional settings in the BIOS Setup Utility. If you want to exit theBIOS Setup Utility with these settings, select Exit Saving Changes and Yes. Save Changes - save changes without exiting the BIOS Setup Utility To save the changes, select Save Changes and Yes.
The changes are saved. You can now make additional settings in the BIOS Setup Utility. If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save changes and power off To save the changes and switch off your device, select Save Changes and Power Off and Yes.
The changes are saved. Your device is shut down. 66 Fujitsu Troubleshooting and tips Troubleshooting and tips Troubleshooting TipsFaultProblemsolving If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows:
Make a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed. Switch the Tablet PC off. Please contact the Hotline/Service Desk. Toll free phone: 1-800-8Fujitsu (1-800-838-5487) You can contact Fujitsu Service and Support in the following ways:
Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.php"
Before you place the call, have the following information ready so that the customer support representative can provide you with the fastest possible solution:
The model name and serial number of the Tablet PC. The serial number is located on a sticker on the underside of the Tablet PC. Notes with the messages that appeared on the screen and information on acoustic signals. All changes you have made to the hardware or software after receiving the Tablet PC. All changes you have made to the BIOS Setup settings after receiving the Tablet PC. Your system configuration and all peripheral devices connected to your system. Your sales contract. Our Tablet PCs have been designed primarily with mobile applications in mind. This means that considerable effort has been made to optimize components and equipment in terms of weight, space and energy requirements. Depending on the particular configuration you have purchased, it is possible that functionality may be slightly reduced compared to a desktop PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://solutions.us.fujitsu.com"
Fujitsu 67 Troubleshooting and tips Executing a reset If the device no longer responds to your inputs, choose one of the following options:
Forced shutdown Press and hold the ON/OFF button for at least 10 seconds. or Press and hold the button on the left side of the system located next to the USB port. It will have the same effect as removing the battery.
The device will be shut down. You can then restart it. Execute a complete reset: Reset BIOS Setup to the standard values Shut down the device. If the device does not respond, you may have to force the shutdown, as described above. Simultaneously press the Volume Down button and the Shortcut button until the OS starts up.
The device will restart when you release the buttons. Help if problems occur Should you encounter a problem with your computer that you cannot resolve yourself:
Note the ID number of your device. The ID number is found on the type rating plate on the back or underside of the casing. For further clarification of the problem, contact the Fujitsu Service Desk. When you do this, please have ready the ID number and serial number of your system. Recovering your Factory Image In the event you need to recover your system, please refer to the appendix of this Operating Manual. The Tablet PCs date or time is incorrect Chargingback-upbatteryCause Time and date are incorrect. Troubleshooting With the BIOS-Setup-Utility, you can set the Summertime Wintertime Incorrecttime Timenotcorrect Wrongdate/time Datenotcorrect date and time in the System menu. Date and time are still set incorrectly after switching on the Tablet PC. Please contact your sales outlet or our hotline/service desk. 68 Fujitsu Troubleshooting and tips Battery charging indicator does not illuminate Cause The battery is discharged. Troubleshooting Connect the Tablet PC to a power outlet using the AC adapter. Note: The battery will only be charged again when the battery capacity is less than 90%. The Tablet PCs touchscreen remains dark darktouchscreenCause Touchscreen is switched off. Troubleshooting Press a key (external keyboard) or tap on Touchscreen the touchscreen. External monitor or television set connected. Check whether the graphics driver settings are correct or whether an external monitor has been detected in "Intel Graphics Media Accelerator Driver for mobile". The display on the Tablet PCs touchscreen is diff cult to read. TouchscreenCause Reflected glare Touchscreen Troubleshooting Move the Tablet PC into a different position. Increase the brightness of the screen. Fujitsu 69 Troubleshooting and tips The external monitor remains blank Troubleshooting MonitorCause Switch the external monitor on. Monitor is switched off. Power saving has been activated (monitor is Press a key (external keyboard) or tap on blank). Brightness is set to dark. Screen output is set to the Tablet PC touchscreen. Adjust the brightness of the monitor. Check whether the graphics driver settings are correct or whether an external monitor has been detected in "Intel Graphics Media Accelerator Driver for mobile". the touchscreen. The external monitors AC cable or data cable is not connected properly. Switch off the Tablet PC and the external monitor. or A forced shutdown (reset) button is located on the left side of the system located next to the USB port. To achieve the same effect as removing the battery, press the reset button. Check whether the AC cable is plugged properly into the external monitor and into the power outlet. Check that the data cable is properly connected to the Tablet PC and the external monitor (if it is plugged in with a connector). Switch on the external monitor and the Tablet PC. Monitor The external monitor is blank or the image is unstable MonitorCause The wrong external monitor has been selected or the wrong screen resolution has been set for the application program. Troubleshooting Shut down the application program in Windows. If the error persists after shutting down the program, use the key combination for switching the screen output in order to switch to the touchscreen of the Tablet PC. Change the following setting:
Set the screen resolution: Set the screen resolution as described in the documentation for your operating system. Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system. 70 Fujitsu Troubleshooting and tips The cursor does not correctly follow the stylus movements Cause Stylus incorrectly calibrated. Troubleshooting Calibrate the stylus as described in chapters
"Adjusting the stylus", Page 29 and
"Calibrating the stylus", Page 30. Stylus input not working Cause Incorrect driver installed. Troubleshooting Reinstall the driver for the "dual digitizer". The Tablet PC does not start after switch on TabletPCCause The battery is dead. Troubleshooting Charge the battery. or Connect the AC adapter to the Tablet PC. The AC adapter is not connected properly. Check whether the AC adapter is properly connected to the Tablet PC. Switch the Tablet PC on. TabletPC The Tablet PC stops working EndingCause The Tablet PC is in energy saving mode. An application program has caused the malfunction. Troubleshooting End energy saving mode. Close the application program or restart the Tablet PC (by restarting the operating system or switching the device off and back on again). The battery is dead. Charge the battery. or Connect the AC adapter to the Tablet PC. Fujitsu 71 Troubleshooting and tips The printer does not print PrinterdoesnotprintCause The printer is not switched on. The printer is not connected correctly. The printer driver is faulty or not correctly installed, or it is the wrong printer driver. Troubleshooting Make sure that the printer is switched on and ready for operation (refer to the documentation supplied with the printer). Check that the data cable between the Tablet PC and the printer is properly connected. Check that the data cable between the Tablet PC and the printer is properly connected. Check whether the correct printer driver is loaded (refer to the printer documentation). The wireless connection to a network does not work Cause The wireless component is switched off. Troubleshooting Switch the wireless component on (see Thewirelessconnectiontoanetworkdoesnotwork
"Switching the wireless components on and off", Page 36). The wireless component is switched on. Despite this, the wireless connection to a network does not work. Check whether the wireless connection is enabled by the software. Further information on using the wireless component can be found in the help files. The battery discharges too quickly BatteryCause Troubleshooting The battery is either too hot or too cold. In this Bring the Tablet PC up/down to a normal case the battery charging indicator flashes operating temperature again. You may have an application running that consumes a great deal of power due to frequent accessing of the hard disk or optical drive. The maximum brightness may have been set for the screen. If the operating time of the battery life is extremely short, the battery is probably too old. Replace the battery if necessary. Use the AC adapter whenever possible. Reduce the brightness of the screen to lower energy consumption: You will find the setting under Control Panel Hardware and Sounds Windows Mobility Center. 72 Fujitsu Troubleshooting and tips Error messages on the screen This section describes the error messages generated by the BIOS Setup. Error messages displayed by the operating system or programmes are described in the relevant documentation. Errormessagesonthescreen Errormessage:
If the error message appears repeatedly, despite troubleshooting measures, please contact the place of purchase or our customer service center. Error message/cause Keyboard error Bootable device was not found Press <F1> to resume, <F2> to SETUP This error message appears if an error occurs during the self-test before starting the operating system. Real time clock error Resolution If you are using an external keyboard:
Check the connection and reboot the Tablet PC. Check in the BIOS Setup whether your hard disk has been set correctly. Make sure that the operating system is installed on the corresponding drive. To continue, press F1 / Windows button. or To enter the BIOS-Setup-Utility, press F2 / Decrease volume button. Check date and time settings. Fujitsu 73 Technical data Technical data Tablet PC -- Q508 (Model: MQ10A) General Processor Main memory (SO DIMM) Electrical data Safety regulations complied with Protection class Maximum power consumption (when the Tablet PC is switched on, connected to the keyboard cover and the battery is charged):
Touchscreen Size Screen resolution Brightness control Technology Digitizer and glass panel Cameras Intel CherryTrail-T SoC, Quad Core, Intel Atom x5-Z8550 Processor (1.44 GHz, 2M Cache, up to 2.40 GHz) 4GB DiMM onboard IEC60950-1 III 36 W 10.1" WUXGA Wide View TFT, Anti-Glare Display with LED backlit 1920 x 1200 pixels/16 million colors Software control, 101 levels Wide-View High-Bright Display with LED background lighting Dual Digitizer (stylus and touch) Front-facing Webcam: 2MP resolution with status LED indicator Rear-facing Webcam: 8MP resolution with auto-focus and status LED indicator Graphics card Chip Maximum resolution of external display:
Dimensions Width x Depth x Height Weight depending on configuration Intel HD graphics 1920 x 1080 (1080p) 10.4 (w) x 6.7 (d) x 0.6 (h) 264.16mm (w) x 107.18mm (d) x 15.24mm (h) Tablet weight: approximately 1.5 lbs. Keyboard Cover weight: 1.5 lbs. Input devices Tablet buttons Stylus Slots Storage card slot Ports Combined headphones and microphone port 3 keys Stylus with a pressure button 1 x microSD card 3.5 mm stereo mini jack 74 Fujitsu Technical data Docking port USB (Universal Serial Bus) HDMI port Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature Transport temperature (2K2) 1 x 1 x USB 3.0, 1 x USB 2.0 1 x micro HDMI 7K1 7M2 5 C .... 35 C / 41 F .... 95 F 15 C .... 60 C / 5 F .... 140 F Screen resolutions for integrated screen and external screens Max. number of screens Number of external screens Only tablet PC With docking cradle 2 2 2 1 1 1 Integrated screen 1920 x 1200 1920 x 1200 1920 x 1200 System Interface Ports on the cradle USB Type-C 1920 x 1080p 60Hz
-
-
HDMI
-
1920 x 1080p 60Hz
-
VGA
-
-
1920 x 1080
@60Hz Fujitsu 75 Technical data WLAN specif cations Type of network Transfer rate Active frequency Typical operating distances**
Number of channels Security Maximum connected over wireless LAN (during ad hoc connection) recommended number of computers to be Intel Dual Band Wireless-AC 7265 2x2 ac/a/b/g/b/n with integrated Bluetooth 4.1, Wi-Fi based*
2.4 GHz min. 2412, max. 2472 5.8 GHz min. 5180, max. 5825
(Automatic switching) IEEE802.11 a and g: 54 Mbps max. data rate; IEEE802.11n: 300 Mbps max. data rate, IEEE802.11ac: 867 Mbps max. data rate 802.11n: 2.4 GHz or 5 GHz 802.11b/g: 2400~2473 MHz 802.11a: 4900~5850 MHz 802.11ac: 2.4 GHz / 5 GHz 802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft.
(91 m) @ 6 Mbps 802.11ac: 40 ft. (12 m) @ 54 Mbps; 300 ft.
(91 m) @ 6 Mbps 802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft.
(91 m) @ 1 Mbps 802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft.
(91 m) @ 1 Mbps 802.11n: Estimated double the operating distance of 802.11g and 802.11a in their respective frequencies 802.11a: 8 independent channels 802.11b/g: 11 channels, 3 non-overlapping channels 802.11n: Channel bonding takes two of the non-overlapping 20MHz channels and combines it into one 40MHz channel. It is actually 12 non-overlapping channels with channel bonding and 24 without. Also it is 1 non-overlapping channel in 2.4GHz when channel bonding is used. 802.11ac: 5 independent channels Encryption types: compatible with WEP, TKIP, AES***, WPA 1.0 and WPA 2.0 Encryption key, lengths supported: 64 bits and 128 bits 10 units or less ****
* Wi-Fi based indicates that the interconnectivity test of the organization which guarantees the interconnectivity of wireless LANs (Wi-Fi Alliance) was passed.
** The operating distances given above increase or decrease depending on factors such as the number of walls, reflecting material or interference by external RF sources.
*** Network key encryption (WEP) occurs with the number of bits given above, after deduction of the fixed length of 24 bits the user may however also set 40 or 104 bits.
**** Depending on the particular practical application, the number of computers which can be networked is reduced if necessary. 76 Fujitsu Technical data Rechargeable battery For information on the batteries used in your device, please see
"http://solutions.us.fujitsu.com/www/content/support/". Rated voltage Rated capacity 3-cell lithium polymer battery 9030 mAh 3.75 V 34 Wh AC adapter (36 W) for the Tablet PC only
(without cradle) TechnicaldataRated voltage Max. rated current 12 V 3 A An additional AC adapter or AC cable can be ordered at any time. Docking cradle (optional) Electrical data Safety regulations complied with Protection class Ports Headphones port Microphone port Docking port HDMI Port VGA monitor port USB (Universal Serial Bus) LAN port Security Lock device Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature Temperature in transit IEC60950-1 III 3.5 mm stereo mini jack 3.5 mm stereo mini jack 40-pin 1 x 1 x 3 x USB 3.0 1 x 1 x 7K1 7M2 5 C .... 35 C / 41 F .... 95 F 15 C .... 60 C / 5 F .... 140 F Fujitsu 77 Technical data AC adapter (90 W) for the docking cradle (optional) TechnicaldataRated voltage Max. rated current 19 V 4.74 A An additional AC adapter or power cable can be ordered at any time. IEC60950-1 III Keyboard cover (optional) Electrical data Safety regulations complied with Protection class Ports LAN port Docking port Touchpad Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature Temperature in transit Intermediary VESA Mount Plate (optional) Dimensions Width x Depth x Height 7K1 7M2 5 C .... 35 C / 41 F .... 95 F 15 C .... 60 C / 5 F .... 140 F Yes 40-pin Yes 3.54 in x 3.58-2.95 in. x 0.24 in 90mm x 91mm-75mm x 60mm TPU cover with shoulder strap (optional) Dimensions Width x Depth x Height 10.63 in. x 6.02 in. x. 0.75 in 270 mm x 153 mm x 19 mm Folio cover (optional) Dimensions Width x Depth x Height 18.11 in. x 10.75 in. x 0.63 in 460 mm x 273 mm x 16 mm 78 Fujitsu Technical data Adapter cables (optional) USB to HDMI:
USB Type-C to HDMI USB Type-C to microHDMI Full USB to LAN:
LAN Conversion Cable Kit: 1x Full USB to LAN
(GbE, limited performance) Fujitsu 79 Manufacturers notes Manufacturers notes Disposal and recycling You can find information on this subject on your Tablet PC or on our website
("http://solutions.us.fujitsu.com/www/content/products/trade-in_program/"). Notes Recycling your battery Over time, the batteries that run your mobile computer will begin to hold a charge for a shorter amount of time; this is a natural occurrence for all batteries. When this occurs, you may want to replace the battery with a fresh one*. If you replace it, it is important that you dispose of the old battery properly because batteries contain materials that could cause environmental damage if disposed of improperly. Fujitsu is very concerned with environmental protection, and has enlisted the services of the Rechargeable Battery Recycling Corporation (RBRC)**, a nonprofit public service organization dedicated to protecting our environment by recycling old batteries at no cost to you. RBRC has drop-off points at tens of thousands of locations throughout the United States and Canada. To find the location nearest you, go to "www.RBRC.org" or call 1-800-822-8837. If there are no convenient RBRC locations near you, you can also go to the EIA Consumer Education Initiative website "http://EIAE.org/ " and search for a convenient disposal location. Remember protecting the environment is a cooperative effort, and we must make every effort to protect it for current and future generations.
* To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site at "www.shopfujitsu.com" in the US or "www.fujitsu.ca/products/notebooks" in Canada.
** RBRC is an independent third party to which Fujitsu provides funding for battery recycling; RBRC is in no way affiliated with Fujitsu. 80 Fujitsu Manufacturers notes DOC(INDUSTRYCANADA)NOTICES DOC (Industry CANADA) Notices Radios and Television This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment Regulations. CET appareil numrique de la class B respecte toutes les exigence du Rglement sur le matrial brouilleur du Canada. UL Notice IMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate. Only use UL Listed I.T.E. adapters with an output rating of 12 VDC, with a minimum current of 3.0A (36W). The correct output rating is indicated on the AC adapter label. Refer to the illustration below for the correct AC adapter output polarity:
CAUTION:
Hazardous optical radiation may be emitted from the camera flash. Do not operate the flash within 11 in. (284mm) of a person. When using your STYLISTIC tablet equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
Do not use this product near water for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS For Authorized Repair Technicians Only CAUTION:
For continued protection against risk of fire, replace only with the same type and rating fuse. Fujitsu 81 Manufacturers notes ENERGY STAR Compliance Your Fujitsu system is an ENERGY STAR qualified mobile PC. By choosing a computer with the latest energy-saving technology, youre helping to preserve our environment for future generations. ENERGY STAR is a joint program of the U.S. Environmental Protection Agency, U.S. Department of Energy, Natural Resources Canada, and other governments around the world helping us save money while protecting the environment through energy efficient products and practices. With energy costs and global warming top-of-mind for consumers, Fujitsu is committed to offering solutions that help consumers conserve energy and improve the quality of our environment. Display sleep mode:
When the AC adapter is connected, the display turns off after 10 minutes. When the AC adapter is not connected (on battery), the display turns off after 4 minutes. Energy saving benef ts:
Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standard equipment saving half in utility costs. But more than that, ENERGY STAR also makes a difference for the environment. Did you know that the average house can be responsible for twice the greenhouse gas emissions as the average car? Thats because every time you flip on a light switch, run your dishwasher, or turn on your PC, you use energy, which means more greenhouse gas emissions from power plants. So the more energy we can save through energy efficiency, the more we help to reduce greenhouse gases and the risks of global warming. To learn more about the important ENERGY STAR program, visit:"www.energystar.gov". To read about how Fujitsu is supporting Sustainable Management along with several other environmental activities, visit the Fujitsu Corporate Citizenship page at:
"http://www.computers.us.fujitsu.com/www/content/aboutus/environmental/environment.php". 82 Fujitsu FCC and IC Regulatory Information FCC and IC Regulatory Information Please note the following regulatory information related to the wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones. Wireless LAN devices are safe for use by consumers because they operate within the guidelines found in radio frequency safety standards and recommendations. The use of Wireless LAN devices may be restricted in some situations or environments, such as:
On board an airplane, or
In an explosive environment, or In situations where the interference risk to other devices or services is perceived or identied as harmful. In cases in which the policy regarding use of Wireless LAN devices in specic environments is not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the equipment. WARNING: The Fujitsu Tablet when used in dock mode in the cradle will communicate via RF. The device radiates radio frequency energy at a level below the United States FCC and Canadas ISED radio frequency exposure limits. However, the Tablet in docked mode shall not be used in body worn positions. Human contact during normal operation should be minimized and a body to Tablet distance of >20cms shall be maintained. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Details of the authorized configurations can be found on FCC website by entering the FCC ID number that is shown on this device. Fujitsu 83 FCC and IC Regulatory Information Regulatory Information/Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modications made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modication of this device, or the substitution or attachment of connecting cables and equipment other than those specied by the manufacturer. It is the responsibility of the user to correct any interference caused by such unauthorized modication, substitution or attachment. The manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines. This device must not be co-located or operated in conjunction with any other antenna or transmitter. Federal Communications Commission and Industry Canada statement:
This device complies with Part 15 of FCC Rules and Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and, (2) This device must accept any interference, including interference that may cause undesired operation of this device. Dclaration dIndustrie Canada Cet appareil est conforme la RSS concernant les appareils exempt s de licence par Industrie Canada. Son fonctionnement est soumis aux deux condition s suivantes : (1) cet appareil ne doit pas causer dinterfrence nuisib le; (2) cet appareil doit accepter toutes les interfrences reues, y compris celles pouvan t causer un mauvais fonctionnement de lappareil. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
Increase the distance between the equipment and the receiver. 1. Reorient or relocate the receiving antenna. 2. 3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to. 4. Consult the dealer or an experienced radio/TV technician for help. 84 Fujitsu FCC and IC Regulatory Information FCC Radio Frequency Exposure statement The available scientic evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposure have not found any biological effects. Some studies have suggested that some biological effects might occur, but such ndings have not been conrmed by additional research. The wireless LAN radio device has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency
(RF) Exposure Guidelines. The exposure standard for wireless devices employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg, and 1.6W/kg by Industry Canada. This device is compliant with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and Canada RSS 102, and had been tested in accordance with the measurement methods and procedures specied in FCC rules and Canada's RSS102. This device has been tested, and meets the FCC, IC RF exposure guidelines when tested with the device operating conditions. Dclaration de la FCC/dIndustrie Canada sur lexposition aux radiofrquences La norme rgissant lexposition des appareils sans l aux radiofrquences emploie une unit de mesure dnomme Taux dabsorption spcique, ou TAS. La FCC et Industrie Canada ont dni la mme limite de TAS : 1,6 W/kg. Cet appareil est conforme au TAS pour les limites dexposition gnrales de la population/non contrles dnies par les rgles C95.1-1992 de lANSI/IEEE et RSS 102 dIndustrie Canada ; il a t test en conformit avec les mthodes et procdures de mesure spcies dans le Les rgles de la FCC (Ofce dingnierie et de technologie) et la rgle RSS 102 dIndustrie Canada. Cet appareil a t test selon les directives de la FCC et dIC concernant lexposition aux radiofrquences et sest rvl conforme ces dernires lorsquil a t test en contact direct avec le corps. Export restrictions This product or software contains encryption code which may not be exported or transferred from the US or Canada without an approved US Department of Commerce export license. This device complies with Part 15 of FCC Rules., as well as ICES 003 B / NMB 003 B. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modications not expressly authorized by Fujitsu America, Inc. may invalidate the users right to operate this equipment. Fujitsu 85 FCC and IC Regulatory Information Restrictions concernant lexportation Ce produit ou logiciel contient du code de chiffrement qui ne peut tre export ou transfr du Canada ou des tats-Unis sans un permis dexportation du dpartement du commerce des tats-Unis. Ce matriel est conforme la Partie 15 des rglements de la FCC, ainsi qu la norme ICES 003 B/NMB 003 B. Son fonctionnement est soumis aux deux conditions suivantes
: (1) cet appareil ne doit pas causer dinterfrence nuisible; (2) cet appareil doit accepter toutes les interfrences reues, y compris celles pouvant causer un mauvais fonctionnement de lappareil. Toute modication nayant pas t expressment approuve par la socit Fujitsu America Incorporated peut annuler le droit de lutilisateur de se servir du matriel. Canadian Notice The device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems. The maximum antenna gain of 6 dBi permitted (for devices in the 5250 - 5350 MHz, 5470 - 5725 MHz and 5725 - 5825 MHz bands) to comply with the e.i.r.p. limit as stated in A9.2 of RSS210. In addition, users are cautioned to take note that high power radars are allocated as primary users (meaning they have priority) of 5250 - 5350 MHz and 5650 - 5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. Avis pour le Canada Le matriel destin un usage sur la bande 5 150 - 5 250 MHz doit tre utilis uniquement lintrieur an de rduire les risques de brouillage nuisible caus aux systmes mobiles par satellite fonctionnant sur un mme canal. Un gain dantenne de 6 dBi est autoris (pour le matriel utilisant les bandes 5 250 - 5 350 MHz, 5 470 - 5 725 MHz et 5 725 - 5 825 MHz), conformment la limite p.i.r.e. maximale permise selon lannexe A9.2 affrent aux priphriques RSS210. En outre, les utilisateurs doivent prendre garde au fait que les radars de grande puissance sont considrs comme des utilisateurs principaux (ce qui signie quils sont prioritaires) des bandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz et quils pourraient causer des interfrences et/ou des dommages aux appareils de rseau exempts de licence. 86 Fujitsu FCC and IC Regulatory Information AVERTISSEMENT La tablette Fujitsu communiquera par radiofrquences (RF) lorsquelle est utilise en mode station daccueil dans le socle. Lappareil met de lnergie radiofrquence dune intensit infrieure aux limites dexposition humaine aux radiofrquences tablies par la FCC aux tats-Unis et par ISDE au Canada. Toutefois, en mode station daccueil, la tablette ne doit pas toucher le corps. Les contacts avec le corps pendant le fonctionnement normal de lappareil doivent tre minimiss et une distance de plus de 20 cm doit tre maintenue entre le corps et la tablette. Lutilisation dautres accessoires peut conduire un usage non conforme aux limites dexposition aux radiofrquences de la FCC. Des dtails au sujet des configurations autorises sont fournis sur le site Web de la FCC. Entrez alors le numro didentification FCC qui apparat sur cet appareil. Fujitsu 87 Appendix Appendix Before Using the Optional Wireless LAN This manual describes the procedures required to properly set up and configure the optional integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure its correct operation. Keep this manual in a safe place for future reference. Wireless LAN Devices Covered by this Document This document is applicable to systems containing the following device:
Intel Dual Band Wireless-AC 7265 (802.11ac/a/b/g/n WLAN) with Bluetooth v4.1 Characteristics of the WLAN Device The WLAN devices are PCI Express Mini cards attached to the main board of the mobile computer. The WLAN devices operate in license-free RF bands, eliminating the need to procure an FCC operating license. The WLAN operates in the 2.4GHz Industrial, Scientific, and Medical (ISM) RF band and the lower, middle, and upper bands of the 5GHz Unlicensed National Information Infrastructure (UNII) bands. The WLAN devices are capable of five operating modes: IEEE802.11a, IEEE802.11b, IEEE802.11g, IEEE802.11n, and IEEE802.11AC. The WLAN device is Wi-Fi certified and operates (as applicable) at a the maximum data rate of 450 Mbps in IEEE802.11n mode (300 Mbps in this configuration); 54 Mbps in IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode. The WLAN devices support the following encryption methods - WEP, TKIP, CKIP, and AES encryption. The Wireless LAN devices are compliant with the following standards: WPA, WPA2, CCX1.0, CCX2.0, CCX3.0, and CCX4.0. 88 Fujitsu Appendix Wireless LAN Modes Using this Device Ad Hoc Mode
"Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer fashion. That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryption key settings are identically configured on all computers in the Ad Hoc network. Fujitsu 89 Appendix Access Point (Infrastructure) Mode Infrastructure mode refers to a wireless network architecture in which devices communicate with wireless or wired network devices by communicating through an Access Point. In infrastructure mode, wireless devices can communicate with each other or with a wired network. Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., file servers, printers, databases).
**
*
* = An optional hub for a wired LAN may be required depending upon the type of access point used.
** = ADSL modem, cable modem, or similar 90 Fujitsu Appendix How to Handle This Device The WLAN device is an optional device that may come pre-installed in your mobile computer. Under normal circumstances, it should not be necessary for you to remove or re-install it. The Operating System that your mobile computer comes with has been pre-configured to support the WLAN device. Integrated Intel Centrino wireless LAN devices support IEEE802.11a, IEEE802.11ac, IEEE802.11b, IEEE802.11g, and IEEE802.11n. The WLAN device operates in the 2.4 GHz ISM band and the 5 GHz lower, middle, and upper UNII bands. Microwave ovens may interfere with the operation of WLAN devices since they operate in the same 2.4 GHz frequency range as IEEE802.11b/g/n devices. Interference by microwaves does not occur with IEEE802.11a radio which operates in the 5 GHz RF band. Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN devices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput, intermittent disconnects, and many frame errors. It is HIGHLY recommended that these interfering devices be powered off to ensure proper operation of the WLAN device. Deactivating/Disconnecting the WLAN Device Disconnecting the WLAN device may be desired in certain circumstances (to extend battery life) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). The WLAN device can be disconnected in Windows using the WLAN icon in the system tray
(Note that disconnecting via the icon in the system tray does not turn off the radio; it continues to transmit and receive even though its not connected.) The wireless components are switched on and off using the appropriate functions of the operating system. To switch wireless components on and off individually, selectSettings Network
& Internet - WiFi - On / Off. Fujitsu 91 Appendix Conf guring the Wireless LAN The optional WLAN device can be configured to establish wireless network connectivity using the software that is built into Windows. Support for most industry standard security solutions is contained in this software. Pre-defined parameters will be required for this procedure. Please consult with your network administrator for these parameters:
Connection to the network After you have configured your computer, you can connect to an active network by performing the following steps:
1. Click on the WLAN icon in the system tray. 2. Select Connect to a network. 3. Select a network from the list that appears, and click the Connect button. 92 Fujitsu Troubleshooting the WLAN Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. Problem Possible Cause Unavailable network connection Incorrect network name (SSID) or network key Appendix Possible Solution Ad hoc connection: verify that the network names (SSIDs) and network keys (WEP) of all computers to be connected have been configured correctly. SSIDs and WEP key values must be identical on each machine. Access Point (Infrastructure) connection: set the network name (SSID) and network key to the same values as those of the access point. Set the Network Authentication value identically to that of the Access Point. Please consult your network administrator for this value, if necessary. Ad hoc connection: Retry connection after shortening the distance to the destination computer or removing any obstacles for better sight. Access Point (Infrastructure) connection: Retry connection after shortening the distance to the access point or removing any obstacles for better sight. Weak received signal strength and/or link quality Fujitsu 93 Appendix Problem Unavailable network connection
(continued) Possible Cause The WLAN device was deactivated or is disabled The computer to be connected is turned off Incorrectly configured network settings RF interference from Access Points or other wireless networks Wireless network authentication has failed Incorrect configuration IP address Possible Solution Check if the wireless switch is turned On. Go to Start >
Control Panel, and doubleclick on Windows Mobility Center. If the wireless network is off, click the Turn wireless on button. Check if the computer to be connected is turned ON. Recheck the configuration of your network settings. The use of identical or overlapping RF channels can cause interference with the operation of the WLAN device. Change the channel of your Access Point to a channel that does not overlap with the interfering device. Re-check your Network Authentication, Encryption, and Security settings. Incorrectly configured security settings such as an incorrectly typed WEP key, a mis-configured LEAP username, or an incorrectly chosen authentication method will cause the LAN device to associate but not authenticate to the wireless network. This only applies to networks using static IP addresses. Please contact your network administrator for the correct settings. 94 Fujitsu Appendix Using the Bluetooth Device Bluetooth is integrated into the Wireless LAN module. The Bluetooth capabilities are Bluetooth Basic, EDR and Bluetooth Low Energy (BT v4.0) operational modes. What is Bluetooth?
Bluetooth technology is designed as a short-range wireless link between mobile devices, such as laptop computers, phones, printers, and cameras. Bluetooth technology is used to create Personal Area Networks (PANs) between devices in short-range of each other. In the Start menu search field, search for "Bluetooth". Proceed as follows to change Bluetooth settings:
1. 2. Select the Bluetooth settings option (dependent on the operating system). 3. In the Bluetooth settings window, make the desired settings. Where to Find Information About Bluetooth For additional Web site at:
information about Bluetooth Technology, visit the Bluetooth
"www.bluetooth.com". FCC Radiation Exposure Statement This system complies with the FCC limit values for radio frequency radiation in an uncontrolled environment. The Bluetooth antenna is located at the top edge of the LCD screen and is exempt from the criteria for minimum distance because of its low power consumption. The transmitter used in this system must not be operated together with other antennas or transmitters. Canadian Notice To prevent radio interference to licensed services, this system is designed for use in indoor spaces / in buildings and not directly at window openings, to allow a maximum shielding. Warranty Users are not authorized to modify this product. Any modifications invalidate the warranty. This equipment may not be modified, altered, or changed in any way without signed written permission from Fujitsu. Unauthorized modification will void the equipment authorization from the FCC and Industry Canada and the warranty. Fujitsu 95 Appendix Image Backup and Recovery Procedures Windows 10 Procedures It is very important that you create your Recovery Drive before beginning to use your system. It is also important that you create a backup of the content of the C:\Drivers folder on your system to writable media or an external drive. System-specif c software drivers are also available for download through the Fujitsu support site. Note: Most of the information below comes from the Microsoft page
"http://windows.microsoft.com/en-us/windows-10/windows-10-recovery-options". Please refer to it for more details. Creating a recovery drive A recovery drive can help you troubleshoot and fix problems with your PC, even if it wont start. To create one, all you need is a USB flash drive. Windows will inform you of the size the USB flash drive needed to hold the required data. 1. From the taskbar, search for Create a recovery drive and then select it. You may be asked to enter an administrator password or confirm your selection. 2. When the tool opens, make sure Backup system les to the recovery drive is selected and then select Next. 3. Connect a USB drive to your PC, select it, and then select Next - Create. A large number of files need to be copied to the recovery drive, so this could take some time. 4. When its done, select Finish. Note:
If you chose not to back up the system files when you created your recovery drive on Windows 10, you wont be able to use it to reinstall Windows. Recovery options in Windows 10 If your PC isnt running as quickly or reliably as it used to, try one of these recovery options. The following table can help you decide which one to use. Problem Your PC isnt working well and you recently installed an app, driver, or update. Your PC isnt working well and its been a while since you installed anything new. Your PC wont start and youve created a recovery drive. Your PC wont start and you havent created a recovery drive. Try this Restore from a system restore point Reset your PC Use a recovery drive to reinstall Windows Use installation media to reinstall Windows 96 Fujitsu Appendix Restore from a system restore point This option takes your PC back to an earlier point in time, called a system restore point. Restore points are generated when you install a new app, driver, or Windows update, and when you create a restore point manually. Restoring wont affect your personal files, but it will remove apps, drivers, and updates installed after the restore point was made. 1. After updating to RS2, right-click (or press and hold) the Start button and search Control Panel.Control Panel. 2. Search Control Panel for Recovery. 3. Select Recovery - Open System Restore - Next. 4. Choose the restore point related to the problematic app, driver, or update, and then select Next - Finish. Note: If you dont see any restore points, it could be because the system protection isnt turned on. To check, go to the Control Panel, search for Recovery, and then select Recovery - Congure System Restore - Congure and make sure that Turn On System Protection is selected. Reset your PC Resetting lets you choose whether to keep your files or remove them, and then reinstalls Windows. 1. Select Settings - Update & security - Reset this PC - Get started 2. Choose an option:
Option Keep my files Changes you made to settings Apps and drivers you installed What it does This reinstalls Windows 10, but keeps your personal files and any apps that came with your PC. It removes:
This reinstalls Windows 10 and any apps that came with your PC. It removes:
If youre planning to donate, recycle, or sell your PC, use this option and choose to fully clean the drive. This might take an hour or two, but it makes it harder for other people to recover files youve removed. Personal files Changes you made to settings Apps and drivers you installed Remove everything Use a recovery drive to reinstall Windows Note: This process utilizes the USB Recovery Drive that you created in the previous section "Create a Recovery Drive". 1. To reset your PC, select Settings - Update & security - Recovery - Advanced startup - Restart now. If that doesnt fix the problem, try Troubleshoot - Recover from a drive. This will remove your personal files, apps and drivers you installed, and changes you made to settings. If you repartitioned the drive Windows is installed on, note that this will restore the drives default partitions. Fujitsu 97 Appendix Use installation media to reinstall Windows If you have installation media, like a Recovery DVD that you purchased from Fujitsu, you can use it to reinstall Windows. You will need to install additional drivers and applications after reinstalling Windows. To reinstall Windows, follow the steps below:
1. Power on your system. When the Fujitsu logo appears on the screen, press the F12 key. 2. 3. Highlight the CD/DVD option from the Boot Menu and press Enter . 4. Follow the on-screen instructions to restore the image. Insert the bootable disc in your DVD drive. Select the language. At the Windows Setup dialog window, enter your OS, language and other preferences and click Next to continue. Click Install now to proceed with reinstalling Windows. At License terms, check on I accept the license terms and click Next. At Which type of installation do you want, click on Custom: Install Windows only (advanced). Delete all partitions on the drive and click Next. Installation of Windows will start. This will take some time so please wait until the installation is finished and the system restarts. 5. When the system restarts, perform all set-up steps to arrive at the Desktop. 6. Connect to the Internet. 7. Use the Backup of the contents of the C:\Drivers folder to install needed drivers and applications to your system. If it is not available, download the software from the Fujitsu Support Site, as described below in the "Auto Installation support for the software downloaded from support website" section below. Auto Installation support for the software downloaded from support website 1. Download FSDM (Fujitsu Software Download Manager) from the support site and download all the drivers applicable to the model and OS using FSDM if they are not downloaded yet. 3. 2. When the software packages are downloaded from the web, it is important to download the Auto Installer Software package and the model/language-specific Readme file if you prefer to auto install the software. It is important to have the extracted Auto Installer software package folder and Readme file in the same location as the other software folders. Otherwise auto-installation of the software will not be supported. Inside the Auto Installer software package, launch FjAutoinstall.exe as administrator. 4. 5. Click Yes on the User Account Control dialog box. This will take some time to process the software packages. A message will be displayed during this time stating Please wait while the content is being processed. If the EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue. 6. 7. The Fujitsu Software Auto Installer user interface will be launched providing the ability 8. to auto install the software downloaded from the support site. It is recommended that you install all the software in the listed order. You can Select All, to install the software in the order listed. 9. Click the Install button to start the installation. 10. After installing all the selected drivers, the Installation Results window is displayed. Click OK. 98 Fujitsu Appendix 11. You must restart the system for the settings to take effect. Do you wish to reboot now? message appears. Select Yes. 12. The system will now reboot. Downloading driver updates To ensure that you always have the most current driver updates related to your system, you should occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view and download the most current drivers, utilities and applications to determine whether you have the latest versions. To download the FSDM Utility, go to the Support Site:
"http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS". Fujitsu 99 Index Index A AC adapter connecting 19 Set up 19 Anti-theft protection 55 Audio devices, connecting 63 Audio ports 63 B Battery 33 battery charge 34 Caring for and maintaining 33 charge level 33 Charging 33 Discharges too quickly 72 see Rechargeable battery 33 Service life 33 battery charge meter 33 BIOS Setup Utility
, protecting with password 56 calling 64 exiting 66 operation 65 Settings 64 Bluetooth, Safety notes 14 Bonus Apps 21 C Charging back-up battery 68 Choose a location 19 Configuration, BIOS Setup Utility 64 Configuring hardware 64 Configuring system 64 Connecting audio devices 63 Connecting headphones 63 Cradle 39 Connecting a Tablet PC 40 D dark touchscreen 69 Date not correct 68 Declarations of conformity 7 Display Port 61 DOC (INDUSTRY CANADA) NOTICES 81 E Ending Energy energy saving mode 71 Energy consumption 34 Energy saving 14 Energy saving functions 34 Error message:
on the screen 73 Error messages on the screen 73 Ethernet LAN 37 F Fault Elimination 67 First-time setup 18 G Getting started 18 H HDMI port 60 Hinweise Reinigung 17 I Important notes 13 Incorrect time 68 Information, safety 13 K Keyboard cover Connecting a Tablet PC 44 Ports 43 M Making ready to use 19 Memory card handling 34 inserting 35 removing 36 Microphone, connecting 63 Mobile operation 15 Monitor connection 61 no image 70 remains blank 70 unstable image 70 Monitor connection see VGA port 61 100 Fujitsu N Notebook Notes 13 switching off 25 disposal / recycling 80 Energy saving 14 Transport 15 O Operating system activating system protection 58 cancel system protection 58 Protecting with password 58 P Packaging 18 Password changing 56 entering 56 removing 57 Password protection 55 hard disk 59 Ports 39 Keyboard cover 43 Power saving 14 Power-on Power-on indicator 24 Printer does not print 72 Problem solving 67 R Rechargeable battery see battery 33 Reinigung 17 S Safety information 13 Screen connection see VGA port 61 Security functions 55 Security Lock Anti-theft protection 55 using 55 Service life, battery 33 Set up Device 19 Setup Slot see BIOS Setup Utility 64 Memory cards 34 Status indicators 23 Stylus 28 Index Summer time 68 Supervisor password change 56 entering 56 removing 57 Suspend/Resume button 24 Switching on for the first time 20 Symbols Indicators 23 System settings, BIOS Setup Utility 64 T Tablet before traveling 15 operating 22 Tablet PC cannot be started 71 doesnt work 71 reinigen 17 transporting 15 Tablet, operation 22 Tablet: Switching on 24 Tastatur reinigen 17 Technical data 78 AC adapter 77 does not work 72 Time not correct 68 Tips 67 Touchpad reinigen 17 Touchscreen difficult to read 69 reflected glare 69 reinigen 17 remains dark 69 Transport Transportation 15 Traveling, tablet 15 Troubleshooting 67 U USB ports 62 User password change 56 entering 56 removing 57 V VGA port 61 The wireless connection to a network Damage during transportation 18 Fujitsu 101 Index W Webcam 33 Winter time 68 Wireless components Safety notes 14 Wireless LAN Safety notes 14 Wrong date/time 68 102 Fujitsu
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-06-01 | 2500 ~ 2570 | PCB - PCS Licensed Transmitter | Class II permissive change or modification of presently authorized equipment |
2 | 2018-04-19 | 2500 ~ 2570 | PCB - PCS Licensed Transmitter | Change in identification of presently authorized equipment. Original FCC ID: EJE-EM7455D Grant Date: 12/14/2015 |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2018-06-01
|
||||
1 2 |
2018-04-19
|
|||||
1 2 | Applicant's complete, legal business name |
Fujitsu Client Computing Limited (FCCL)
|
||||
1 2 | FCC Registration Number (FRN) |
0009379173
|
||||
1 2 | Physical Address |
1-1, Kamikodanaka 4-chome
|
||||
1 2 |
Nakahara-ku, Kawasaki, N/A 211-8588
|
|||||
1 2 |
Japan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 2 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
EJE
|
||||
1 2 | Equipment Product Code |
EM7455D3
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
M****** U******
|
||||
1 2 | Title |
Engineer
|
||||
1 2 | Telephone Number |
+81-4********
|
||||
1 2 | Fax Number |
+81-4********
|
||||
1 2 |
u******@jp.fujitsu.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/28/2018 | ||||
1 2 | 10/16/2018 | |||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | PCB - PCS Licensed Transmitter | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LTE Module | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Limited Single Modular Approval | ||||
1 2 | Single Modular Approval | |||||
1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 | Change in identification of presently authorized equipment. Original FCC ID: EJE-EM7455D Grant Date: 12/14/2015 | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 2 | No | |||||
1 2 | Grant Comments | Class II Permissive Change. Limited Modular Approval. Adds portable use in STYLISTIC Q508 Tablet PC, Model MQ10A. The highest reported SAR for this implementation for body and simultaneous transmission conditions are 1.37 W/kg and 1.58 W/kg, respectively. Power out listed is conducted at the antenna terminal. This device has 5 MHz and 10 MHz bandwidth modes for LTE Bands 13 (700 MHz); 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5 and 12 (850/700 MHz); 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz modes for LTE Band 26 (850 MHz); 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2, 25 and 4 (1900 and 1700 MHz); 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7 and 41 (2500/2600 MHz). | ||||
1 2 | Single Modular Approval. Power out listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application; and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 700 MHz, 850 MHz, 1700 MHz and 1900 MHz; 9 dBi at 2500/2600 MHz; and 1 dBi at 2300 MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use. This device has 5 MHz and 10 MHz bandwidth modes for LTE Bands 13 and 30 (700/2300 MHz); 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5 and 12 (850/700 MHz); 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz modes for LTE Band 26 (850 MHz); 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2, 25 and 4 (1900 and 1700 MHz); 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7 and 41 (2500/2600 MHz). | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
SPORTON International Inc.
|
||||
1 2 | Name |
A******** C********
|
||||
1 2 | Telephone Number |
886-3******** Extension:
|
||||
1 2 | Fax Number |
886-3********
|
||||
1 2 |
a******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22H | BC | 824 | 849 | 0.224 | 2.5 ppm | 4M14G7D | |||||||||||||||||||||||||||||||||
1 | 2 | 27 | BC | 1710 | 1755 | 0.221 | 2.5 ppm | 4M14G7D | |||||||||||||||||||||||||||||||||
1 | 3 | 24E | BC | 1850 | 1910 | 0.231 | 2.5 ppm | 4M14G7D | |||||||||||||||||||||||||||||||||
1 | 4 | 27 | BC | 699 | 716 | 0.248 | 2.5 ppm | 8M91G7D | |||||||||||||||||||||||||||||||||
1 | 5 | 27 | BC | 699 | 716 | 0.215 | 2.5 ppm | 8M91W7D | |||||||||||||||||||||||||||||||||
1 | 6 | 27 | BC | 777 | 787 | 0.247 | 2.5 ppm | 8M91G7D | |||||||||||||||||||||||||||||||||
1 | 7 | 27 | BC | 777 | 787 | 0.227 | 2.5 ppm | 8M88W7D | |||||||||||||||||||||||||||||||||
1 | 8 | 9 | BC | 814 | 824 | 0.242 | 2.5 ppm | 1M08G7D | |||||||||||||||||||||||||||||||||
1 | 9 | 9 | BC | 814 | 824 | 0.212 | 2.5 ppm | 2M69W7D | |||||||||||||||||||||||||||||||||
1 | 1 | 9 | BC | 814 | 824 | 0.136 | 2.5 ppm | 13M5W7D | |||||||||||||||||||||||||||||||||
1 | 11 | 22H | BC | 824 | 849 | 0.25 | 2.5 ppm | 8M94G7D | |||||||||||||||||||||||||||||||||
1 | 12 | 22H | BC | 824 | 849 | 0.188 | 2.5 ppm | 13M4G7D | |||||||||||||||||||||||||||||||||
1 | 13 | 22H | BC | 824 | 849 | 0.24 | 2.5 ppm | 1M08W7D | |||||||||||||||||||||||||||||||||
1 | 14 | 22H | BC | 824 | 849 | 0.144 | 2.5 ppm | 13M5W7D | |||||||||||||||||||||||||||||||||
1 | 15 | 27 | BC | 1710 | 1755 | 0.251 | 2.5 ppm | 13M4G7D | |||||||||||||||||||||||||||||||||
1 | 16 | 27 | BC | 1710 | 1755 | 0.186 | 2.5 ppm | 17M9G7D | |||||||||||||||||||||||||||||||||
1 | 17 | 27 | BC | 1710 | 1755 | 0.234 | 2.5 ppm | 13M4W7D | |||||||||||||||||||||||||||||||||
1 | 18 | 27 | BC | 1710 | 1755 | 0.145 | 2.5 ppm | 17M8W7D | |||||||||||||||||||||||||||||||||
1 | 19 | 24E | BC | 1850 | 1915 | 0.251 | 2.5 ppm | 8M49G7D | |||||||||||||||||||||||||||||||||
1 | 2 | 24E | BC | 1850 | 1915 | 0.248 | 2.5 ppm | 17M9G7D | |||||||||||||||||||||||||||||||||
1 | 21 | 24E | BC | 1850 | 1915 | 0.227 | 2.5 ppm | 17M9W7D | |||||||||||||||||||||||||||||||||
1 | 22 | 27 | BC | 2496 | 2690 | 0.197 | 2.5 ppm | 17M8G7D | |||||||||||||||||||||||||||||||||
1 | 23 | 27 | BC | 2496 | 2690 | 0.171 | 2.5 ppm | 8M91W7D | |||||||||||||||||||||||||||||||||
1 | 24 | 27 | BC | 2496 | 2690 | 0.109 | 2.5 ppm | 17M8W7D | |||||||||||||||||||||||||||||||||
1 | 25 | 27 | BC | 2500 | 2570 | 0.196 | 2.5 ppm | 8M91G7D | |||||||||||||||||||||||||||||||||
1 | 26 | 27 | BC | 2500 | 2570 | 0.133 | 2.5 ppm | 17M9G7D | |||||||||||||||||||||||||||||||||
1 | 27 | 27 | BC | 2500 | 2570 | 0.167 | 2.5 ppm | 8M91W7D | |||||||||||||||||||||||||||||||||
1 | 28 | 27 | BC | 2500 | 2570 | 0.105 | 2.5 ppm | 17M9W7D | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 22H | BC | 824 | 849 | 0.224 | 2.5 ppm | 4M14G7D | |||||||||||||||||||||||||||||||||
2 | 2 | 27 | BC | 1710 | 1755 | 0.221 | 2.5 ppm | 4M14G7D | |||||||||||||||||||||||||||||||||
2 | 3 | 24E | BC | 1850 | 1910 | 0.231 | 2.5 ppm | 4M14G7D | |||||||||||||||||||||||||||||||||
2 | 4 | 27 | BC | 699 | 716 | 0.248 | 2.5 ppm | 8M91G7D | |||||||||||||||||||||||||||||||||
2 | 5 | 27 | BC | 699 | 716 | 0.215 | 2.5 ppm | 8M91W7D | |||||||||||||||||||||||||||||||||
2 | 6 | 27 | BC | 777 | 787 | 0.247 | 2.5 ppm | 8M91G7D | |||||||||||||||||||||||||||||||||
2 | 7 | 27 | BC | 777 | 787 | 0.227 | 2.5 ppm | 8M88W7D | |||||||||||||||||||||||||||||||||
2 | 8 | 9 | BC | 814 | 824 | 0.242 | 2.5 ppm | 1M08G7D | |||||||||||||||||||||||||||||||||
2 | 9 | 9 | BC | 814 | 824 | 0.212 | 2.5 ppm | 2M69W7D | |||||||||||||||||||||||||||||||||
2 | 1 | 9 | BC | 814 | 824 | 0.136 | 2.5 ppm | 13M5W7D | |||||||||||||||||||||||||||||||||
2 | 11 | 22H | BC | 824 | 849 | 0.25 | 2.5 ppm | 8M94G7D | |||||||||||||||||||||||||||||||||
2 | 12 | 22H | BC | 824 | 849 | 0.188 | 2.5 ppm | 13M4G7D | |||||||||||||||||||||||||||||||||
2 | 13 | 22H | BC | 824 | 849 | 0.24 | 2.5 ppm | 1M08W7D | |||||||||||||||||||||||||||||||||
2 | 14 | 22H | BC | 824 | 849 | 0.144 | 2.5 ppm | 13M5W7D | |||||||||||||||||||||||||||||||||
2 | 15 | 27 | BC | 1710 | 1755 | 0.251 | 2.5 ppm | 13M4G7D | |||||||||||||||||||||||||||||||||
2 | 16 | 27 | BC | 1710 | 1755 | 0.186 | 2.5 ppm | 17M9G7D | |||||||||||||||||||||||||||||||||
2 | 17 | 27 | BC | 1710 | 1755 | 0.234 | 2.5 ppm | 13M4W7D | |||||||||||||||||||||||||||||||||
2 | 18 | 27 | BC | 1710 | 1755 | 0.145 | 2.5 ppm | 17M8W7D | |||||||||||||||||||||||||||||||||
2 | 19 | 24E | BC | 1850 | 1915 | 0.251 | 2.5 ppm | 8M49G7D | |||||||||||||||||||||||||||||||||
2 | 2 | 24E | BC | 1850 | 1915 | 0.248 | 2.5 ppm | 17M9G7D | |||||||||||||||||||||||||||||||||
2 | 21 | 24E | BC | 1850 | 1915 | 0.227 | 2.5 ppm | 17M9W7D | |||||||||||||||||||||||||||||||||
2 | 22 | 27 | BC | 2305 | 2315 | 0.197 | 2.5 ppm | 4M47G7D | |||||||||||||||||||||||||||||||||
2 | 23 | 27 | BC | 2305 | 2315 | 0.191 | 2.5 ppm | 8M94G7D | |||||||||||||||||||||||||||||||||
2 | 24 | 27 | BC | 2305 | 2315 | 0.175 | 2.5 ppm | 8M91W7D | |||||||||||||||||||||||||||||||||
2 | 25 | 27 | BC | 2496 | 2690 | 0.197 | 2.5 ppm | 17M8G7D | |||||||||||||||||||||||||||||||||
2 | 26 | 27 | BC | 2496 | 2690 | 0.171 | 2.5 ppm | 8M91W7D | |||||||||||||||||||||||||||||||||
2 | 27 | 27 | BC | 2496 | 2690 | 0.109 | 2.5 ppm | 17M8W7D | |||||||||||||||||||||||||||||||||
2 | 28 | 27 | BC | 2500 | 2570 | 0.196 | 2.5 ppm | 8M91G7D | |||||||||||||||||||||||||||||||||
2 | 29 | 27 | BC | 2500 | 2570 | 0.133 | 2.5 ppm | 17M9G7D | |||||||||||||||||||||||||||||||||
2 | 3 | 27 | BC | 2500 | 2570 | 0.167 | 2.5 ppm | 8M91W7D | |||||||||||||||||||||||||||||||||
2 | 31 | 27 | BC | 2500 | 2570 | 0.105 | 2.5 ppm | 17M9W7D |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC