ECW031 wood clock with bluetooth and wireless charging User manual

Instruction Manual 1. Product introduction 1) Features:

Time, date, temperature, can automatically switch display, you can also manually lock the display time, temperature. Support wireless charging Working voltage: DC 5V/2A Perpetual calendar from 2000 to 2099, a total of 100 years. 12/24 hours: 12/24 hour conversion is possible, default 24-hour system, January 1, 2016, 12:00 Three groups of alarms, each group is 1 minute long The voice switch is freely adjustable (press the Down button) 2) General product configuration Tips: When you open the product packaging, please check if there are the following accessories in the box:

One digital clock One instruction manual 2A USB cable 2. Main technical parameters of the product This product is directly equipped with power adapter, INPUT: AC100-240V-50/60HZ, OUTPUT:

5V-2000MA Wireless charging: power 5W, output voltage 5V, charging current 600-750MA Bluetooth speaker:

Version: Bluetooth V4.1 Wireless transmission distance: more than 10 meters Transmission power: CLASS 3, 0dbm Sensitivity: -80dBm<0.1%BER Frequency range: 2.402GHz-2.480GHz Audio performance SBC decoding Audio signal to noise ratio: 75dB Speaker impedance 4 ohms Speaker power 3W*2 3. Display and button introduction 1) Display function description 2) Button introduction Other introductions:

1. Display mode:

There are two display modes, press the button SET, you could change the mode of display;

Dp-1: time, temperature and year, month and day display would change orderly (Carousel mode) Dp-2: only time, temperature display (Fixed mode) 2. Voice Mode (power-saving mode):

Press the button DOWN, on: Sd--:Sd;

on: Sd means sound control in on;

--: SD means sound control is off. It will automatically close the voice mode in seconds; Display will be woke up when the sound is louder than 60 decibels or flapping the clock. If close the voice control mode, constant light function will be opened. 3. Temperature Mode Setting:

Press the button of UP, you could change the Temperature Mode between C and F 4. Brightness Setting:

Press the button of UP for 3 seconds, you could enter into the mode of brightness, then you could change the brightness through pressing the button of UP (more bright) and pressing the button of DOWN(less bright). L1: Bright L2: Less Bright L3: Weakest brightness 5. Power supply:

It must use plugged-in power supply when charging the phone.

(The clock with built-in cell battery, it will automatically remember the time when the power is off, we dont need to reset the time);

6. Alarm Setting:

User can set 3 alarm times every day, alarm lasting 1 minute, the sound is: beep beep beep, can press any key on the back of clock to stop the alarm;

SETTING INSTRUCTION Press the button SET (While the numbers flashing), you would enter into the setting mode. And the setting order are as follows:

1. Setting of Date When entering the set mode, the letter flashing setting order Year Month Day, press button UP or DOWN to change the number. 2. 12H/24H Setting After finishing the setting of date, you would enter into the12H/24H Setting mode while you press SET, and also you could change the 12H/24H through pressing the UP and DOWN. At the 12H Setting mode, PM lights on. 3. Time Setting After finishing the date setting mode, you could enter into the time mode setting while you need to press SET and then you could adjust the time through pressing UP and DOWN. 4. Alarm Setting After finishing the time mode setting, you could enter into the alarm setting while you need to continue press SET, and then you could adjust the time through pressing UP and DOWN. Press UP and DOWN can adjust upward or downward too pen on A1/Close -: A1.When the letter on :

A1 appears ,you could press SET and enter into A1 Alarm clock Setting (you could set 3 Alarm clock A1/A2/A3 ).Then the letter of time --flashing, you continue to press UP and DOWN to set alarm . You could continue set the Alarm clock A2/A3 follow the step1 and step 2. 5.Alarm Setting For Work Day After finishing the alarm setting, Press the key SET. Then you could press UP and DOWN to change the status of on/off workday alarm.(on: E means on; --:E means off.) ON/OFF button: Press and hold the ON/OFF switch Bluetooth in any mode to search for WOODSHOW SPEAKER connection. In Bluetooth mode, press this button to answer the call and pause playback. Wireless charging method: top wireless charging, mobile phone with wireless charging function, or mobile phone without this function plug in the receiving piece, the receiving part is placed in the middle of the product to be charged, whether the charging is successful to see the mobile phone prompt. Automatically disconnects the charge when fully charged. FCC COMPLIANCE STATEMENTS This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Caution: changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. This device must not be co-located for operating in conjunction with any other antenna or transmitter. The distance between user and products should be no less than 20cm.