FCC ID: WXATR320 TIME RECORDER

GIGATMS TR320 Time Recorder Users Manual 2012/6/4 1. Contents 1. 2. 3. 4. CONTENTS ......................................................................................................................................................................... 2 CHANGE HISTORY .............................................................................................................................................................. 4 ABOUT THIS MANUAL ....................................................................................................................................................... 5 HARDWARE MANUAL ........................................................................................................................................................ 6 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 INTRODUCTION ..................................................................................................................................................................... 8 EXTERNAL APPEARANCE ......................................................................................................................................................... 8 HARDWARE SPECIFICATION ................................................................................................................................................... 10 INSTALLATION ..................................................................................................................................................................... 11 POWERING UP FOR THE FIRST TIME ........................................................................................................................................ 11 SYSTEM STATUS DISPLAY ....................................................................................................................................................... 13 RFID CARD READING AND DISPLAY ......................................................................................................................................... 14 READING MASTER CARD ...................................................................................................................................................... 15 SYSTEM SETTING ................................................................................................................................................................. 15 4.10 DOWNLOADING ATTENDANT DATA .......................................................................................................................................... 19 5. SOFTWARE MANUAL ....................................................................................................................................................... 20 5.1 5.2 SUBSTANTIVE EXPLANATION .................................................................................................................................................. 21 INSTALL & UNINSTALL .......................................................................................................................................................... 22 5.2.1 System requirements ................................................................................................................................................. 22 5.2.2 Products specification ............................................................................................................................................... 22 5.2.3 Install Time Recorder Utility (TRU) ............................................................................................................................ 22 5.2.4 Install TR320 Manager .............................................................................................................................................. 24 5.2.5 Uninstall Time Recorder Utility (TRU)........................................................................................................................ 25 5.2.6 Uninstall TR320 Manager ......................................................................................................................................... 26 5.3 TIME RECORDER UTILITY ...................................................................................................................................................... 27 5.3.1 Setup Connections and Password .............................................................................................................................. 27 5.3.1.1 5.3.1.2 Acquire IP address .............................................................................................................................................................. 27 Setup Connection in TRU .................................................................................................................................................... 27 5.3.2 Setup Properties ........................................................................................................................................................ 29 5.3.2.1 Setup Login password ......................................................................................................................................................... 29 5.3.3 Downloading Time Data ........................................................................................................................................... 31 5.3.4 Language Editor ........................................................................................................................................................ 33 5.3.4.1 5.3.4.2 5.3.4.3 Adding New Language ........................................................................................................................................................ 34 Editing String Table ............................................................................................................................................................. 34 Applying Language .............................................................................................................................................................. 36 2 5.3.4.4 Notes................................................................................................................................................................................... 36 5.3.5 Maintain Database .................................................................................................................................................... 36 5.3.5.1 5.3.5.2 5.3.5.3 Backup Database ................................................................................................................................................................ 37 Restore Database ................................................................................................................................................................ 37 Compact Database .............................................................................................................................................................. 37 5.3.6 Loading TR320 Manager Software ............................................................................................................................ 37 5.4 TR320 MANAGER .............................................................................................................................................................. 38 5.4.1 The first execution ..................................................................................................................................................... 38 5.4.1.1 Check login password ......................................................................................................................................................... 38 5.4.2 Create a tree structure .............................................................................................................................................. 39 5.4.2.1 5.4.2.2 5.4.2.3 5.4.2.4 Company ............................................................................................................................................................................. 39 Department ........................................................................................................................................................................ 39 Title ..................................................................................................................................................................................... 39 User (Employees) ................................................................................................................................................................ 40 5.4.3 Information ............................................................................................................................................................... 41 5.4.3.1 5.4.3.2 5.4.3.3 5.4.3.4 5.4.3.5 5.4.3.6 5.4.3.7 5.4.3.8 5.4.3.9 Create message template (*.mt) file ................................................................................................................................... 41 Bind to database ................................................................................................................................................................. 41 Assign to users (Employees)................................................................................................................................................ 42 Message .............................................................................................................................................................................. 45 Update to machine ............................................................................................................................................................. 46 Delete message................................................................................................................................................................... 47 Change machine image ....................................................................................................................................................... 49 Search function ................................................................................................................................................................... 49 Backup ................................................................................................................................................................................ 50 5.5 APPENDIX-A ...................................................................................................................................................................... 51 5.5.1 5.5.1.1 5.5.1.2 5.5.1.3 5.5.1.4 5.5.1.5 5.5.1.6 5.5.1.7 5.5.1.8 5.5.1.9 A-1 Message Tool .................................................................................................................................................. 51 Overview of Message Tool Window .................................................................................................................................... 51 Template Components ........................................................................................................................................................ 53 Drawing Shapes and Lines................................................................................................................................................... 53 Modifying Shapes and Lines ............................................................................................................................................... 53 Deleting Shapes and Lines .................................................................................................................................................. 54 Typing Text .......................................................................................................................................................................... 54 Modifying Text .................................................................................................................................................................... 54 Deleting Text ....................................................................................................................................................................... 55 Inserting Image ................................................................................................................................................................... 55 5.5.1.10 Changing Image .................................................................................................................................................................. 55 5.5.1.11 Deleting Image .................................................................................................................................................................... 55 5.5.1.12 Saving Message Template ................................................................................................................................................... 55 5.5.1.13 Exporting Message Template .............................................................................................................................................. 56 3 2. Change History Release Date Version Description 8/28/2011 5/23/2012 6/4/2012 0.8.0 0.9.0 1.0.0 First draft Include Hardware Manual Add more FCC Warning and Compliance Statements 4 3. About This Manual This manual, the TR320 Time Recorder UsersManual, provides information about installing and using TR320 Time Recorder. Two parts are consisted in this manual:

 Hardware Manual Describes the hardware of TR320 Time Recorder.

 Software Manual Describes available PC software. 5 4. Hardware Manual This part of documentation describes the specification and operations of TR320 Time Recorder. 6 FCC Warning and Compliance Statement:

FCC Warning: Changes or modifications which are not expressly approved by the GIGA-TMS Inc. could void the user's authority to operate the equipment. FCC Part 15 Regulatory Compliance:

This equipment complies with Part 15 of the FCC rules, and operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. 7 4.1 Introduction TR320 is a time recorder to provide recording of attendance using the RFID technology. With its graphic display, this time recorder provides not only access control based on built in white list records but also the message display for each personal identification. Besides, the administrator can configure each white list personal ID with its associate name, department and title by using the specific TR320 Utility developed by GIGA-TMS; therefore, each white list user can see his/her personal information while punching his or her RFID card. In addition, user can replace systems icons and Logo with their preferred one(s) by using this TR320 Utility. 4.2 External Appearance 128* 64 Graphic Monochrome LCD Display Event keys: (Left to Right) IN, OUT, BREAK IN, BREAK OUT RFID card reading area 8 Wall bracket notch Factory reset buttom System reset buttom Wall suspend notch Wall bracket notch Wall suspend notch Power & Relay I/O line slot Ethernet line slot Wall bracket screw hole Power Adaptor Jacket Diagnostic Port RJ45 Ethernet Connector Bell and Door Lock Relay 9 4.3 Hardware Specification Display 128x64 Graphic Monochrome, blue backlight RFID card type ISO/IEC 1443A/MiFare Ethernet port 10 Base-T/100 Base-TX, 802.3 compliance Bell and Door Relay Environment AC 250V/10A or AC 125V/15A, DC 12A/28V Operating: 0 ~ 55, Storage: -10 ~ 55, 90% R.H. Power Consumption DC: 12V/500mA Internal memory 10000 attendant records,1000 white list records, 1000 message records 10 4.4 Installation Please refer to the packing and installation sheet in the gift box to install TR320 on the wall. 4.5 Powering Up for the First Time Once TR320 is powered up, it shows product name and company logo, and then acquires IP address from network.

 Display Logo Screen This product and Logo screen can be replaced by TR320 utility.

Information Screen Get IP successfully:

Fail to get IP address:

If its the first time to power up TR320, you have to set master card for administrator by following the procedures below.

 Master Card Enrollment Screen Its required to set a least one master card by following the steps below. 1. Entry screen for Master Card setting:

2. After sweeping a RFID card:

3. Press key to set the second master card. 11 4. Sweep another RFID card as the second master card. 5. Press key to set the third master card. 6. Sweep one more RFID card as the third master card. or key to finish Master Card setting and go to normal working screen. 7. Press If TR320 has been set at least one master card, it will go to normal working screen directly after powering up the system. 12 4.6 System status display Normal working state:

When the time recorder is ready to read a RFID card, it shows its current date and time, week day, Ethernet link, attendant record memory status and event icons as the screen below. The shift number will be displayed only if it is set from 01 to 99. Network Status Icons:

: Ethernet link works normally and has got IP address successfully.

: Ethernet link is disconnected.

: Ethernet linked is connected but not able to get IP address. Each of the icons is a 17(width)*16(height) BMP file and it can be replaced by TR320 Utility. RFID card reading memory occupation status icons:

: Memory occupation is below 1/3 of the total space.

: Memory occupation has reached 1/3 and below 2/3 of the total space.

: Memory occupation has reach 2/3 of the total space but not yet full.

: Memory occupation is full. Each of the icons is a 13(width)*8(height) BMP file and it can be replaced by TR320 Utility. Shift Icon:

: The shift number will be shown only when the shift is set except 00, .i.e. from 01 to 99. Card reading logging state icons:

: IN

: OUT

: BREAK IN

: BREAK OUT When the icon is highlighted, the carding reading will be recorded with the selected logging state. Each of the icons is a 24(width)*16(height) BMP file and it can be replaced by TR320 Utility. 13 4.7 RFID Card reading and display RFID Card Reading When TR320 is at normal working state and a MiFare 13.5M RFID card is read, this time recorder may show the message according to the following status. 1. When the RFID card is not one of the white list records, a warning tone will be heard and the warning message will be displayed like below. 2. When the RFID card is a white list record and the relative name, job title and department has been configured in advance, and there is a message for this ID. TR320 will show this IDs relative message along with a message icon like below.

: This mailbox icon indicates that this user ID has a message left and user can press to view message. Here are some example message applications below.

Job and working place assignment:

 Remaining working hour display:

If the employees are paid by hour, the message below shows the remaining working hour via the calculation of working hour from PC side application.

 General notice publication:

 Meeting notice:

[Message operation]

 Press key below delete to delete message shown on the display. 14

 Press key below OK to exit to normal working state.

 System time out: If there is no key pressed, system will go back to normal working state after a configurable delay time.

 Card reading during message display: If there is another card read, system will show message for this RFID card as the description above.

 Message expiration: If a message is expired, this message will be deleted automatically by the time recorder. There is at most one message for each user ID before it is deleted. 3. When the RFID card reading memory is full, TR320 will show the warning message below. In such case, the administrator has to download records; otherwise, TR320 will not open the door. 4.8 Reading Master Card Master card can now be used to provide the following basic system information:

IP acquisition modes, IP and MAC address, and Firmware Version. 4.9 System Setting TR320 has to be configured via the specific TR320 Utility developed by GIGA-TMS Inc. Start up TRU Utility and double click the property icon to enter the TR320 login password and bring up TR320 property setting screen as below. Property icon 15 16 17 Item name Machine number Definition Default This item is part of the attendant record 1001 sent by TR320, and it is used to identify which TR320 is sending this attendant record. Machine name Name of a TR320 device TR-320 Time Date Current Time of TR320 Current date of TR320 N/A N/A Date display format yyyy-mm-date or mm-date-yyyy yyyy-mm-date Time display format 12/24hr mode 12 or 24 hour display mode. Login Password TR320 Property Login password. 12 1234 Bell Table There are 32 bell settings records, each none

(max 4 digits) which includes the setting elements of action week, action time and duration. Bell relay will activate according to the setting records. Shift string There are always two digits from 01 to 00 99 to display shift. 00 is a default shift used for not to show shift. Lock activation duration Activation duration of door lock. 30 sec Total number of records Current total white list card reading N/A records. This field is read only. Number of new records New records not yet downloaded. N/A Number of free records Records available to be used for white list N/A card reading. Firmware version TR320 firmware version N/A Generic user interface language Future usage for multiple language English application. Only English is available for TR320 now. Display template Normal mode display template setting. Template 2 Define the way how network IP is acquired IP acquisition: DHCP or STATIC IP DHCP RFID or Message display hold time setting Card reading or message display delay 5 sec time. Set the starting date of daylight saving Daylight setting starting date Set the ending date of daylight saving Daylight setting ending date Enable or Disable daylight saving time function Enable or Disable daylight time Disable 18 4.10 Downloading Attendant data The TR320 saves the attendance data onto its internal flash memory using a so-called delimited text format. With delimited text format, fields within a record are separated by a TAB character (tabulation, ASCII= 09 Hex) while records are separated from each other by CR (Carriage Return, ASCII= OD Hex) and LF (Line Feed, ASCII= 0A Hex) characters. Each TR4050s record consists of the following fields:

Field Event Date Time ID-code Shift Machine No Length Format 1 10 8 10 2 4 1, 2, 3, 4 DD-MM-YYYY hh:mm:ss XXX, apostrophe is added to make sure that this field is treated as a string by applications like Microsoft Excel. SS, can be in the range from 01 to 99. NNNN can be in the range from 0000 to 9999. 19 5. Software Manual This part of the document describes all PC software supplied by GIGA-TMS. Two software packages are available:

 Time Recorder Utility This software is able to configure device connections, properties and downloading time data etc.

 TR320 Manager This software is able to establish user information and messages. 20 5.1 Substantive Explanation IP Address : Internet Protocol Address Information : The image on TR320 while user induce his tag Message : The image on TR320 in check message function White list : All users in database of TR320 Manager, and this list will sync to TR320 after Update function Message template : Create a template in Message Tool. The template allow us to fill different data to the text field for different user 21 5.2 Install & Uninstall 5.2.1 System requirements Internet Minimum Requirements TCP/IP LAN Connections

(With DHPC) Recommended TCP/IP LAN

(With DHPC) Operation System XP,Vista,Windows7 XP,Vista,Windows7 Computer processor 800MHz Pentium III 1.5GHz(XP),2GHz(Vista,Windows7) or better Computer Memory 512MB 1GB Screen Resolution 1024x768 pixels 1024x768 pixels or better 5.2.2 Products specification 1000 white list occupations Leave message to given user(s) Entrance guard Attendance record Manage user(s) Create unique information for every user Search functions for database 5.2.3 Install Time Recorder Utility (TRU) Browse PROMAGGGGProxData ProxData CD ProxData ProxData The directory \\software 22 Execute TR320Manager_V1_0_X_PS00138.exe Click Next to install Time Recorder Utility (TRU) 23 5.2.4 Install TR320 Manager TR320Manager Installation will pop out after the installation of TRU Click Next to install TR320Manager Finish the installation 24 5.2.5 Uninstall Time Recorder Utility (TRU) In Programs->GIGATMS->TR320 Execute Uninstall Time Recorder Utility for TR320 to uninstall TRU 25 5.2.6 Uninstall TR320 Manager In Programs->GIGATMS->Uninstall TR320 Manager Execute Uninstall TR320 Manager You have to select Delete All option here to clear all folders 26 5.3 Time Recorder Utility 5.3.1 Setup Connections and Password 5.3.1.1 Acquire IP address NotesNotesNotesNotes s connected to your Local Area Network (LAN) Confirm TR320 was connected to your Local Area N Confirm TR320 wa etwork (LAN) s connected to your Local Area N Confirm TR320 wa Confirm TR320 wa s connected to your Local Area N etwork (LAN) etwork (LAN) with DHCP (Dynamic Host Configuration Protocol) function router with DHCP (Dynamic Host Configuration Protocol) Confirm router Confirm function with DHCP (Dynamic Host Configuration Protocol) router Confirm Confirm with DHCP (Dynamic Host Configuration Protocol) router function function Plug in the power to TR320 The IP address acquired Address is 192.168.100.37 5.3.1.2 Setup Connection in TRU Execute Time Recorder Utility for TR320 27 Select the Connections and click to add a new machine Use Ping and Test Connection to check the communication is correct If the communication is correct, press OK to create this connection on TRU 28 5.3.2 Setup Properties 5.3.2.1 Setup Login password Switch to Download page, select a connection and click properties as picture 29 to login the current machine Click Enter the default password is 1234 Double click on Login password and enter new password Please remember this password, TR320 need this password while login. 30 5.3.3 Downloading Time Data While users punch the time data, the Tag ID will be stored in the internal memory of terminal, associated with the date, time, event id and shift number. After setting up the connections, all the terminals will be displayed in the [Download] inspection. In this inspection, you can get a brief view of the properties of connected terminals, such as the machine number, name etc. If you want get more detail information, just double-click the list item, a properties window will pop up, which shows all the information of the selected terminal. Please keep in mind, some of the properties need to login first prior to modify. TRU provides two ways to download the time data: Download at once and Scheduling, which are detailed as below.

 Download at once:

Select the checkbox on the list view, and then click on the toolbar. All the time data of selected

(checked) terminals will be downloaded and saved to the specified path. For flexible purposes, TRU also allows to download the highlighted one or specified terminals. To do this, click the button menu of button, then click [Highlighted Time Recorder] or [Checked Time Recorder(s)]. 31

 Scheduling:

By using Scheduling, you can schedule any time to download the time data. Scheduling starts each time you start the TRU program and is able to run in the background. With Scheduling, you can schedule a time to download time data daily, weekly, monthly, or at certain times. To configure the scheduled time, from [Tools] menu, click [Options]. On the [Options] window, click [Schedule] tab. To enable the Scheduling function, select the Type to Schedule. First, select the [Schedule Task] for days period of scheduling, and then click [Time Table] to edit the specified times of downloading time data. After completing the scheduling configuration, click [OK] to activate the settings. 32 5.3.4 Language Editor The Language Editor provides a way to localize the interface of TRU. You can use this function to create a new native language interface, which is translated from the default used English. The translation needs to be done on your own. For example, for Italian, the Name translates to Nome. To launch the Language Editor dialog, on the Tools menu, click Language Editor. Shown below is the screenshot of Language Editor dialog. This dialog has the following area and controls:

 Language list box: Displays current supported languages.

 Edit button: Modifies the string table of selected language.

 Add button: Adds a new language.

 Delete button: Deletes the selected language. Please take note, the English and current applied language cant not be deleted.

 Apply button: Applies the selected language to be the TRU interface used.

 Close button: Closes Language Editor dialog. 33 5.3.4.1 Adding New Language In the Add New Language dialog, enter new language name. Click OK to save the setting, the new language name will appear in the list box. The next step is to edit the string table for the new language, please refer to Editing String Table. 5.3.4.2 Editing String Table All the string used in the interface of TRU is stored in the StringList table of Res.mdb file (MS Access 2000 format). This file is located in the installation path of TRU. Every language has its own column in StringList table, when adding a new language, TRU will create a column in this table, and the column name is same to the language name. Shown below is the screenshot of Edit the Language Settings dialog. 34 This dialog has following areas and controls:

 Font area: TRU will give a default font name and size for the new language. If your native language has issue on this setting, please click Select to modify to meet your need.

 Select button: Sets the font settings used in TRU interface.

 String area: There is a String Table grid displaying two columns. The first column is always to be English, which is read-only, displays all the string used in interface of the TRU program. The second column is the selected language (or your native language). Comparing with string in English column, translate and enter your native language in the cell of second column. When switching the focus of cell, the enter value will be saved to Res.mdb database file immediately.

 Close button: Close this dialog. 35 5.3.4.3 Applying Language After clicking Apply button of Language Editor dialog, TRU will re-load the string in selected language from the Res.mdb, and then displays the changes to the interface. If there is string leave blank in the string table of applied language, TRU will use English string instead. 5.3.4.4 Notes Some string may include Enter key, you can enlarge the height of the cell to see the whole content of string. If string includes Enter key, using [Ctrl]-[Enter] compound keys to entry the Enter key. The & symbol is a hotkey operator. &File means the hotkey is F, &Save means the hotkey is S. If you want to put the new completed language in the setup file of TRU, then the file Res.mdb is needed for packaging. Please contact your dealers salesman for details. 5.3.5 Maintain Database From time to time, it is important for the TRU database to be backed up, purged and compacted. The frequency at which these tasks are performed depend on the size of your time data and the speed at which the TRU database file is growing. Before we continue, read the definitions of each action that can be performed on the TRU database:

 Backup Database This function makes an copy of the TRU database as of the time the function is executed. This is very useful for keeping a copy of your data file in case of a disaster. It should be performed on a weekly basis or even more frequently if the data in TRU is extremely important. This method of backup should not take the place of a normal daily tape backup.

 Restore Database This function can be used to import the backup database. Please keep in mind; the current database settings will be overwritten by the imported database.

 Compact Database To increase performance, when records are deleted from the TRU database, they are not permanently deleted. However, when many deleted records accumulate in the TRU database, it can hinder performance. To permanently remove deleted records (and therefore reduce the size of the database and increase performance) 'Compacting' the database is recommended on a monthly or semi-monthly basis. A good indication of when you should clear time data is when TRU performance seems to have slowed considerably due to the increase in file size (usually well over 10MB). If reporting is taking much longer than it used to, it might be time to clear time data. All the database maintenances are all running under Normal Mode. 36 5.3.5.1 Backup Database To backup data, follow these instructions:

 From Tools menu, click Database Utility/Backup Database.

 You will be asked to give a path name for the copy of the database. Enter a valid path name and click OK. 5.3.5.2 Restore Database To restore database, follow these instructions:

 From Tools menu, click Database Utility/Restore Database.

 You will be given a warning. Read the warning and click Yes if you wish to continue.

 Specify the path that the backup database is located.

 Click Open if you are certain you want to continue. 5.3.5.3 Compact Database To compact the database, follow these instructions:

 From Tools menu, click Database Utility/Compact Database. 5.3.6 Loading TR320 Manager Software TR320 Manager Software is mainly used to establish the users and messages information. To load this software, see following:

1. On the Tools, point to Device Specific. 2. Click TR320. 37 5.4 TR320 Manager 5.4.1 The first execution 5.4.1.1 Check login password Check the password is correct or not for each machine If all password is correct, click OK to skip this section Double click machine in list and enter the right password Tick Remember the password , this dialog cannot show in next time 38 5.4.2 Create a tree structure 5.4.2.1 Company This is the top (level 1) node of tree Only a company node exist in TR320 Manager TR320 Manager TR320 Manager TR320 Manager This node cannot remove Click to modify company name 5.4.2.2 Department This is level 2 node of tree Click to add a department Click to modify department(current node) name Click to delete department(current node) Users under the department will delete, after this step. Users under the department will delete, after this step. Users under the department will delete, after this step. Users under the department will delete, after this step. 5.4.2.3 Title Tools Title manager Add Enter title name Click Add Delete Select a title Click Delete 39 5.4.2.4 User (Employees) This is level 3 node of tree Click to add a user Click to modify user(current node) name Click An user with the following properties to delete user(current node)

 Name: Users name can modify in here

 Title: Select a title ID Number: Enter the ID in this column , it indicates to your human resource or other number you want to use.

 Card Number: Enter Tags ID number. 40 5.4.3 Information 5.4.3.1 Create message template (*.mt) file Tools Templet Editor Please reference Appendix-A Message Tool Textbox Insert textbox to create to template 5.4.3.2 Bind to database This tool use to assign the different image of information to each user. The image will change if you bind the 41 different data. The message template file (*.mt) contains several component on canvas. The text component edited in Message Tool can bind data in TR320 Manager, Image Information click Load button Laod *.mt file you made by template editor. Click bind after you selected. Select the textbox or other type item here If you dont want to bind any data , Just select None , and enter words here. Click OK to confirm your setting . Select the data you want to bind 5.4.3.3 Assign to users (Employees) Please reference 3-4 Search function After the bind step, the relation column will display what you bound. 42 Check the relation column,and click Assign to to assign the picture to users. Click OK to comfirm and Click Close to close Information function Check the following result The result 1 The text field with fix word Dept.:

2 The text field with fix word Title:

3 The text field with fix word Name:

4 The text field was bound by the data which is Department 5 The text field was bound by the data which is Title 6 The text field was bound by the data which is Name 43 The result on TR320 44 5.4.3.4 Message Image Message 5.4.3.4.1 Leave message Input message in Message Editor 3-4-2 Set expiration time

 The message will delete at the time in TR320 45

 The default value is current time add 7 days 3-4-2 Assign to User (Employees)

 Same as 3-3-3 5.4.3.5 Update to machine Before update to machine , we have to create the relataion between user and machine.Please check the following picture

 This picture express Bruce will update to Machine 001 ToolsMachine User Manager

 This picture express the marked users will update to Machine 001 Click to modify users for currect machine 3-5-1 Information

 Update white list to TR320, the old data in TR320 will disappear. 46 The newest user data in TR320 Manager will replace the old.

 Update information image for each user 3-5-2 Message

 Select users

 Update message to selected users 3-5-2 Both

 Update white list and message to TR320

 All users and message will refresh

 The old message expiration time will reset to the current time add 7 days 5.4.3.6 Delete message In main windows (Only delete a message in a time)

 Select a user

 Switch to Message page

 Click Delete ImageDelete Message (Delete many message in a time) 47

 Select users

 Click Delete after selected and close this windows 48 5.4.3.7 Change machine image ToolsMachine Image Manager

 Select Logo, In, Out.etc,

 Load other image or edit to replace the old one LoaLoaLoaLoadddd We only support the bitmap that pixel level is 1 bit We only support the bitmap that pixel level is 1 bit We only support the bitmap that pixel level is 1 bit We only support the bitmap that pixel level is 1 bit If click edit, you just need save file after modify

 Select the machine

 Click Update To Machine

 Click Reset To Default to reset to default image 5.4.3.8 Search function In Assign to, User Information, Delete Message, we can see the following picture. A: Search condition B: Search by Name, Department, Title, ID, Card Number 49 C: Result In main windows Search an user by this column and button The name have to correct absolutely Ask: If I dont know the users full name, how can I search in main windows?

Ans: Tools users Information Search by fuzzy match here, right click on the name and click Copy Close this windows, paste on the search columns in main window and click Close this windows, paste on the search columns in main window and click Close this windows, paste on the search columns in main window and click Close this windows, paste on the search columns in main window and click 5.4.3.9 Backup

 Export Database: Output a *.bak file. This file include users data, the relation between user and machine

 Import Database: Input a *.bak file. The current database will clear and replaced by the input file. 50

 Load Empty database: Erase all data by this step 5.5 Appendix-A 5.5.1 A-1 Message Tool The Message Tool is used to create a message template and design the layout by using template components. 5.5.1.1 Overview of Message Tool Window Shown below is the screen shot of Message Tool window. 51 Menu bar Toolbar Canvas The Message Tool window has following elements:

Menu bar

 File menu

 New: Create a new message template.

 Open: Select an existed message template file(*.mt) and display it to a canvas.

 Save: Save the changes of loaded file.

 Save As: Save the message template to a specified file.

 Export: Export the message template to a BMP or JPG file.

 Close: Unload Message Tool window. Tool bar

 File tools

New: Create a new empty message template. Open: Select an existed message template file(*.mt) and display it to a canvas. Save: Save the changes of loaded file. Export: Export the message template to a BMP or JPG file.

 Template component tools

Pointer: Lets you to select template components. Draw Line: Draw a straight line shape by using line template component in the canvas. Draw Rectangle: Draw a rectangle or square shape by using rectangle template component in the canvas. Draw Ellipse: Draw an ellipse shape by using ellipse template component in the canvas. Draw Text: Type and format a textual string by using text template component in the canvas. Draw Image: Insert an image from an image file by using image template component in the canvas. Property: Modify the properties of selected template component. Zoom In: Large size view of canvas. Zoom out: Normal side view of canvas. 52 Canvas

 Displays the layout and contents of template components designed in message template. 5.5.1.2 Template Components The template components are used to draw in canvas. There are three types of template components, which are:

 Shape and line component: Draw shapes and lines in the canvas.

 Text component: Type text in the canvas.

Image component: Insert an image in the canvas. The template component can be put in any place of canvas. You can select the component then to remove and resize it. 5.5.1.3 Drawing Shapes and Lines Following procedure shows you how to draw a shape or line in the canvas. 1. Select the shape or line component in the toolbar. 2. Drag in the document to draw the shape or line. Release the mouse when you are done. 5.5.1.4 Modifying Shapes and Lines Following procedure shows you how to modify a selected shape or line in the canvas. 1. Right-click to select the shape or line component in the document, click Property. 2. In the shape/line Property dialog, you can:

* Change the line color: Click to select the line color.

* Change the line width: In the Line Width box, select a line width.

* Fill color: Select Fill check box, and then click to select the color to fill. 53 5.5.1.5 Deleting Shapes and Lines Following procedure shows you how to delete a selected shape or line in the canvas. 1. Right-click to select the shape or line component in the document, click Delete. 5.5.1.6 Typing Text Following procedure shows you how to type text at a point in the canvas. 1. Click the text 2. component in the toolbar. In the Text Editor dialog, type characters or words in the Text box. Click Font to modify the text property. 3. Click OK and click in the document to set an insertion point for the text. 4. Drag in the document to decide the cutoff. Release the mouse when you are done. 5.5.1.7 Modifying Text Following procedure shows you how to modify a selected text in the canvas. 1. Right-click to select the text in the document, click Property. 2. In the Text Editor dialog, modify the text properties and then click OK. 54 5.5.1.8 Deleting Text Following procedure shows you how to delete text in the canvas. 2. Right-click to select the text component in the document, click Delete. 5.5.1.9 Inserting Image Following procedure shows you how to insert an image in the canvas. 1. Click the image 2. Click OK and then click in the document to set an insertion point for the image. 3. Drag in the document to decide the cutoff. Release the mouse when you are done. component in the toolbar and then select the image file. 5.5.1.10 Changing Image Following procedure shows you how to change a selected image in the canvas. 1. Right-click to select the image in the document, click Property. 2. Select an image file and then click OK. 5.5.1.11 Deleting Image Following procedure shows you how to delete image in the canvas. 3. Right-click to select the image component in the document, click Delete. 5.5.1.12 Saving Message Template The message template is a text file format and the file extension is mt. When you finish the design of 55 message template, in the toolbar, click save button to save the changes. If you want to save to other path, do the following:

1. On the File menu, click Save As. 2. Indicate the path to be saved to and then click OK. 5.5.1.13 Exporting Message Template Message Tool supports to transfer the message template to a graphic image file. You can export to BMP or Indicate the path to be exported to. JPG format image. To export the message template, do the following:

1. On the File menu, click Export. 2. 3. Enter the file name. 4. Select the format of graphic image. 5. Click OK. 56