FCC ID: 2AP3Q-RS2360B Smart skipping rope/jump rope

Smart Jump Rope 27x180mm / Rope size: 3000mm 0.20 kg 28 x 16 mm 2 x 1.5V AAA

1.LCD display 2.Function buttons 3.Buzzer hole 4.Battery compartment 5.PVC steel rope 6.Rope accessories 1.BT icon indicates connected. 2.Free Jumping mode: jump without time or repetition limit. 3.Time countdown mode: jump with a time limit. You can choose from 30 seconds, 1 minute, 5 minutes, 10 minutes, and custom ized time on the Skipjoy App. Without the app, the device will record the last selected period of time. 4.Jump countdown mode: set a limit of the number of jumps. You can choose from 50, 100, 500, 1000, and customized number of jumps on the Skipjoy App. Without the App, the device will record the last selected number of jumps. 5.Number of jumps 6.Jumping time 7.Calorie data Free Jumping Mode Time Countdown Mode Long press the upper button for 2S to turn on the device. The default mode is Free jumping mode. Short press the upper button to switch to Time countdown mode. Short press the button to adjust the countdown time. Short press the upper button to switch Jump countdown mode. Short press the button to adjust the countdown number of jumps. Jump Countdown Mode The display in different modes can be also switched by Skipjoy App. No mode can be switched during the jumping. When the Jumping stops above 1.3 seconds, it will display the number of jumping and the jumping time. At the same time, short press the button to switch the screen, the display will show out the consumed calorie data. Consumed Calories Mode The installation of the other jump handle is the same as above showing.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Made in China

Guangdong Welland Technology Co., Ltd. No.85 MinKe East Road, MinYing Science and Technology Park, ShiQi District, Zhongshan, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-03-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AP3Q-RS2360B

[Guangdong Welland Technology Co., Ltd.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicant signature)

(Hillary Chan) Hi fn chy

Guangdong Welland Technology Co., Ltd. No.85 MinKe East Road, MinYing Science and Technology Park, ShiQi District, Zhongshan, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-03-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AP3Q-RS2360B

[Guangdong Welland Technology Co., Ltd.] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely,

(Applicant signature)

(Hillary Chan) , hum zl , i "f

Guangdong Welland Technology Co., Ltd. No.85 MinKe East Road, MinYing Science and Technology Park, ShiQi District, Zhongshan, China Date: Aug. 03, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AP3Q-RS2360B US Agent Attestation Statement / Part 2.911(d)(7)

[Guangdong Welland Technology Co., Ltd.] certifies, that as of [Aug. 03, 2023], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2AP3Q-RS2360B.

[Guangdong Welland Technology Co., Ltd.], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [Guangdong Welland Technology Co., Ltd.] for FCC ID: 2AP3Q-RS2360B. Designated Agent Information:

Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: Support@FCCUSAgent.com Sincerely, Company: [Guangdong Welland Technology Co., Ltd.]

Company Representative: [Hillary Chan]

Tel: 86-760-2816 0369 Email: hillary@welland.hk FRN: 0027591197 Signature:

Designated Agent: FCC US Agent, LLC Designated Agent Representative: Tim Payne Signature:

Guangdong Welland Technology Co., Ltd. Agent Authorization Company: Guangdong Welland Technology Co., Ltd. Address: No.85 MinKe East Road, MinYing Science and Technology Park, ShiQi District, Zhongshan, China Product Name: Smart skipping rope/jump rope Model Number(s): RS2360B, RS2360B-A, RS2360LB, RS2360LB-A Product Description: Smart skipping rope/jump rope We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Hillary Chan Company: Guangdong Welland Technology Co., Ltd. Date: 2023-08-03

Guangdong Welland Technology Co., Ltd. No.85 MinKe East Road, MinYing Science and Technology Park, ShiQi District, Zhongshan, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-08-03 Subject; Request for Confidentiality FCC ID: 2AP3Q-RS2360B To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. XX] Schematic Diagram XX Block Diagram

(_] Parts List XX] Operational Description

(J Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

[_] External Photos L] Test Setup Photos

[_] Internal Photos

[-] User Manual

[_] For 45 days, pursuant to Public Notice DA 04-1705. OR

(_] For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Contact person: Hillary Chan Y ilo Cham

Guangdong Welland Technology Co., Ltd. Aug. 03, 2023 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2AP3Q-RS2360B Model Number: RS2360B, RS2360B-A, RS2360LB, RS2360LB-A To Whom It May Concern:

We, The Guangdong Welland Technology Co., Ltd. hereby declare that the models are identical except the model name and appearance colors. Except for the different above, no other modification is performed. Sincerely, Signature:

Contact person: Hillary Chan