Instruction Book Please read the instruction manual carefully before use and take good care of it. If you do not understand the product and after-sale service, please contact the local sales department for consultation!
Thank you for using our company's xx steering wheel heating system. Preface Thanks for your choosing of our steering wheel LED system. With the improvement of social life and technologies, people have higher requirements on lifes quality, especially the requirements on higher standard to motors, and the pursuit of comfortableness and safety have been put forward to the schedule. The steering wheel LED system provides convenient and safe security for the driving process, which reduces the accidents due to the distractions in driving. Our expectation is Drive It Safer & Better,OHC team will do best to provide excellent and great per-
formance steering wheel system products for you. 01 OHC Contents 1. Products Introduction Appearance instructions Display and Operation Function Map Navigation Instructions Technological Parameters Main Functions Products Feature Matching Actions 2. Instructions ED Model Functions Oil Consumption RPM/Vehicle Speed Engine Load Rate/Vehicle Voltage Water Temperature/Oil Temperature Oil Remaining Endurance Mileage Turbocharging LED Switching Functions Racing Model Functions LAP Racing Timer Accelerometer per Hundred Kilometers(Reserved) 400 Meters Racing Bicycle(Custom-Made) Setting Mode Functions Luminance Speed Unit Temperature Unit Speed Switching Limiting Value Time Recording Choosing Version Information 3. Frequently Questions and Answers 4. Safety Tips and Precautions 5. Warranty Services and Policies Warranty policies Warranty Certificate 03 03 03 04 05 06 06 06 06 07 07 07 08 08 09 09 09 10 10 11 11 12 12 13 13 14 14 15 16 16 17 17 18 18 18 02 Product Introduction I. Appearance instructions 1. Display and Operation 3 2 1 2 4 1 left L controller 2 LED light 3 displayer 4 right R controller There is a short-pressing button and a long-pressing button. Long pressing means press the L or R more than 2s. When dual-clicking, you must press the second time within 2s. There are 6 buttons in total, the initiations are as followed:
Left short-pressing Right long-pressing LK RL Left long-pressing LL Right short-pressing RK Right dual-clicking 2xRK Left dual-clicking 2xLK Connecting the OHC intelligent wheel system After starting up, there will be LOGO on the displayer. When the LED lights, the instructing lights will be off. Opening up the displayer and LED, pressing the LL and RL at the same time. After starting up, display will show the off sign, pressing any button to close the displayer within 3s.
The necessary instructions and cautions The special reminders you should pay attention to Moving as the arrows Finishing Instruction Used Marks 03 Product Introduction II. Function Map Main Menu RK RK RK RK LK LK LK LK ED MODEL LED Switches Racing MODEL Setting MODEL LL RL LL RL LL RL LL RL Functions LED opening LAP-model by second Lk Lk LED closing Accelerometer per Hundred Kilometers
(Reserved) Lk Lk 400 Meters Racing Bicycle(Custom-Made) Lk light Speed unit Lk Lk Lk Lk Lk Lk Lk Temperature Unit Using unit Speed Switching limiting value Time Recording Choosing Version Information Oil Consumption Engine Speed Vehicle Speed Engine Load Rate Current Voltage Water Temperature Oil Temperature Oil Remaining Endurance Mileage Turbocharging Lk Lk Lk Lk Lk Lk Lk Lk Lk Lk 04 Product Introduction III. Navigation Instructions Main Menu There are mainly four menus: ED/LED/racing/setting, choosing the related function in the menu by LK or RK. At this time there will be larger marks and related functions. By RL, you can obtain the related expected menu. Functional Unit In the functional menu, you can get the individual function menu by LK, and jumping to the first one from the last one. You can choose any functional menu by the introduction buttons. For entering the main menu, pressing the LL. The characteristics of it are the control button in setting pattern, which will be introduced in the later setting pattern. It is usually used in the setting button with logic, and then you can enter to hollow part by pressing RL, which LL can enter to swollen part, which can also be used in the subfunction. LED Indicator Light
(a) Matching with engine speed When the vehicle is speeding up, the engine speed becomes larger and the LED lights with different colors to provide assistance for drivers, so that they can know the active information of the vehicles.
(b) Matching with steering angle When parking, rotating the steering wheel, and then the LED will shine different colors according to the direction.
(c) Matching with the flashing turn lights hen opening the turn lights, the LED will shine different colors. Once you enter into the LL and RL in the main menu, you can close the displayer and LED lights. Entering into the LL and RL at the same tine, you can re-open the displayer and LED.Product Introduction 05 Product Introduction II. Technical Parameters Working Voltage Working Current 12V-16V main part<40mA/ displayer<25mA Quiescent Current 3mA Applicable Temperature Working Frequency Sensing Distance
-40~+85 2.4GHz 10m III. Main Functions IV. Product Features 1. Fuel consumption details 1. New design, non-broken 2. Perception of steering wheel angle 3. Dynamic steering expression allocation 2. Dual-core design, lower power 4. Time recording 5. Dynamic sensing of rotating speed 6. Racing mileage records 7. Engine information presentation using is more reliable 3. 2.4G wireless hopping technology is more stable 4. Interaction of man and car 8. Special information setting up 5. Standard and Quality 9. Endurance Mileage estimating 10. Turbocharging displaying V. Matching Action 1. When the key is in ON button, pressing the button of main OBD module more than 5s, the LED lights will shine quickly. 2. Pressing the LL and RL on the wheel at the same time more than 5s, the functional unit on the displayer shines quickly. 3. The speed of the LED becomes lower, and there is Matching Success on the displayer. 06 Product Introduction I. ED Model Function ED model provides different functions for supporting the fuel-using priority. There are 10 functional units in ED model in total, and these units can be controlled by LK button. Furthermore, LED provides visual help for drivers to master the vehicle information better. There will be different arrangements based on the vehicle types, and there may be some functional unit which cannot be shown. Fuel Using by Second 1 0.0 00:00:00
[a] second chronograph fuel-using model: the mark with 1 means timely using 1 2 fuel consumption:
3 second chronograph the mark with 1 means average using There will show hour-, minute-, and second-model in the display. The largest time value is 23:59:59, and then the timer will jump back to 00:00:00 . 1 0.0 00:00:08 1 0.0 00:08:08 1 0.0 00:00:00 Pressing RK for starting up second chronograph second chronograph Pressing RK for closing Pressing LL and RL at the same time to set up the second chronograph When using the second chronograph, you can adjust the other functions in the ED model. Besides, you can change to LED and setting up pattern. The timer will be operate in the backstage. When displaying second chronograph, you can count on the time. As long as the second chronograph is operating, you can not change to racing model. When closing the starting up system, the second chronograph will be off and save the time for you. Connecting the starting up system, the second chronograph begin to operate again. 07 Product Introduction
[b] oil using The oil using can be expressed as each country, and you can see the details in the chapter of setting up model. Pressing RL,it can be switched between timely oil using and average one. Timely Oil Using Timely oil using is a 10km distance for moving average, and it is updated per 100m. If it is possible, it can be shown as the choosing country. when closing the system, saving the number and keeping it the the saver no more than half an hour, and then clearing up it. Average Oil Using Average oil using is the amount of oil using since the last setting up, and it also can be shown according to the country. Before closing the system, the value is stored in the individual saver. No matter which one is used,it can be set up with LL and RL buttons. Engine Speed/Vehicle Speed 0 rmp 0 km/h 1 mark of speed 2 3 4 speed vehicle speed speed mark It shows the engine speed and vehicle speed timely, so that to control the vehicle model. After closing the system, these date will be cleared off. Engine Load Rate/Vehicle Voltage 0 %
-.--V 1 2 3 4 load rate mark load rate voltage voltage mark 08 Product Introduction It timely shows the engine load rate so that to control the vehicle model. After closing the system, these date will be cleared off. Water Temperature/Oil Temperature 80 100 1 water temperature mark 2 3 4 water temperature oil temperature oil temperature mark It timely shows the water temperature and oil temperature so that to control the vehicle model. According to the setting up , it will show the temperature After closing the system, these date will be cleared off. The warning data will be saved in the saver. with or . Remaining Oil 1
oil quantity oil quantity mark It timely shows the remaining oil so that to control the vehicle model. fter closing the system, these date will be cleared off. The oil data will be saved in the saver. Endurance Mileage endurance mileage mark
0.0km mileage 1 2 1 2 09 Product Introduction It timely shows the endurance mileage so that to control the vehicle model. After closing the system, these date will be cleared off. Turbocharging
bar pressure turbocharging mark It timely shows the turbocharging so that to control the vehicle model. fter closing the system, these date will be cleared off. II. LED Switching Function Through this function, you can open or close the LED so that to better control it. luminance(refer to the later changing setting up) closing the LED oping the LED Providing the signs for opening or closing the LED so that to better control it. Using the LK or RK to open or close it. Choosing to open all these LED and saving it by pressing LL. Default tab. 10 1 2 1 2 3 Product Introduction III. Racing Model Function Racing model provides special functions for racing road.
It cannot be used to the unsuitable roads. Drivers have the responsibility to drive in a suitable way. You cannot try dangerous driving way or it may be accidents. Racing model functions cannot be used in public roads. LAP Racing Timer(round time/distance) Illustration:
Fast racing road in Huanan, comparatively shorter 1 LAP racing timer is designed for racing and can count on the time for one round(no more than 0 round). It can save every largest time and speed for each round and can show them later. The following example is the timer on fast racing road in Huanan.
--.--km LAP 00:03'10 Round model mark 1 2 3 distance second It shows minute, second, millisecond,and LAP on the displayer, the largest one is 59:5999 after one hour, it cannot be shown by millisecond. Example 11
--.--km L01 00:03'10 Pressing the RK to race
(example: racing quickly over starting line/terminal line) Once begin, L01 on the displayer means the first round Product Introduction Pressing RK, you can count on the time and distance for the first round. The time is is lasting 3s. During this time, the timer operates in the backstage. After 3s, it shows the time of second round from 0. Pressing RK, you can count on the time and distance for the second round. The time is is lasting 3s. During this time, the timer operates in the backstage. After 3s, it shows the time of third round from 0. Repetition as it. During the course, you cannot use other functions.The timer operates in the backstage. Only showing the timer, you can begin to count on the time. Pressing 2xRK, you can closing racing. After 3s, transferring to CUR model and all the total time. Under such circumstance, the last rounds time cannot be counted, so it cannot be saved as the total time. Dual-clicking after over the target 3s. L01 150.01km 00:52'03 L02 310.11km 01:02'03 CUR 460.12km LAP 01:54'06 CUR 460.12km LAP 01:54'06 Canceling all the date and pressing the LL and RL. Accelerometer per Hundred Kilometers(Reserved)/400 Meters Racing Bicycle(Custom-Made) 12 Product Introduction IV. Setting Up Model Functions Setting up model is used to choose the LED and the individual setting up. Under the setting up model, you can press LK and RK to control, like checking in the form, which will show the mark of reversing. Due to the7 control menus, there are two showing menus,1-4 and 5-7. When transferring from 4 to 5 or from 7 to 1, the menus will change. 1 2 3 4 4 5 6 7 luminance(displayer and LED) speed switching limit value 5 6 7 time-recording model choose version information 1 2 3 4 speed unit temperature unit oil using unit Luminance Pressing RL to choose the function. Setting up the form to choose the functions Pressing RL to choose luminance. 1 2 3 luminance mark LED luminance displayer luminance Pressing LK or RK to set up for the displayer and LED. Pressing RL to confirm your choice. 13 Product Introduction In order to decrease the luminance of displayer or LED, or you want to increase the luminance of displayer or LED, please press RK. For saving your choice, please press LL. when decreasing the luminance, you should close the displayer, so you must press LL and RL at the same time at least 2s. Pressing RL to choose speed mark Speed Unit km/h mph Pressing LK or RK to choose function, transferring from km/h and mph. Pressing LL to save the setting up and come back to the main menu. Temperature Unit Pressing RL to choose temperature mark Pressing LK or RK to choose function, transferring from and . According to the choosing unit, pressing LK to set up the water temperature. You can increase or decrease the value by LK or RK. 100 14 Product Introduction Over the valve, the indicating light will shine and warn you the possible over-heating for the engine, matter what the contents are. Pressing LL to save the setting up and come back to the main menu. Pressing RL to choose oil box mark EC US UK JP Pressing LK or RK to choose function, transferring from every items.
[1] EC(L/KM) [2] US(M/AG) [3] UK(M/IG) [4] JP(KM/L) Pressing LL to save the setting up and come back to the main menu when it refers to km/h in choosing the speed unit, you just can choose EC and JP for oil using unit. If choosing mph, the oil using units are US and UK Speed Switching Limit Value You can adjust LED based on the vehicles or your driving ways by setting up. The limit value is shown by one LED. The value can be changed to the best button or the highest value. Pressing RL to choose any limit value. 4000 15 Pressing LK or RK, you can reduce or increase per 100 from 1000 to 9900 Pressing LL to save the setting up and come back to the main menu Product Introduction The arrangements of LED are as follow:
[1] LED in 50%-60%(green)
[2] LED in 60%-70%(green)
[3] LED in 70%-80%(yellow)
[4] LED in 80%-90%(yellow)
[5] LED in 90%-100%(red)
.100%LED,
. Time-recording Model Choose If necessary, you can measure the time by hand or measure by toucher Pressing RL to choose second mark M A Pressing RL to choose second mark
[1] M=measure by hand [2] A=measure by toucher Pressing LL to save the setting up and come back to the main menu Version Information Pressing RL to choose version mark OBD:1811151950 S W:1811151937 Pressing RL to choose version mark
[1] OBD: means the connection in OBD(Nov,15th, 2018, 19:50)
[2] SW:means the number on wheel(Nov,15th, 2018, 19:37)
,LL. 16 Pressing LL to save the setting up and come back to the main menu Common Questions and Answers Cannot be handle after allocation?
[1] checking the current /ACC
[2] checking the connection The light doesnt work?
[1]checking the opening of ACC
[2]checking the connection
[3] checking the matching of main land and
[3]checking the matching of them pressing land The backlight doesnt work?
The horn calls long time?
[1] checking the switch
[2] checking the connection
[3] checking the using of matching Safety Tips and Precautions
[1]checking the matching
[2]checking the supplement
[3]checking the correction Notice & Safety Tips Safety Tips
[1] Before using this product, please read the safety tips carefully and do as It follows, in case of any unnecessary problems, so that the functions can be deployed in the best mode.
[2] Dont use the product in non-operating temperature.
[3] There may be some small part, please put it beyond the children, in case of swallowing some small parts or any other accidents.
[4] Dont throw the parts as common life garbage, obeying the locally environmental principles. Precautions
[1] Steering wheel heating system is an assistance.
[2] Ensure to operate the products in a secure mode.
[3] Dont pour liquid on the products. 17 Warranty Services and Policies I. Warranty Policies Thanks for your purchasing, under the normal using, you can enjoy the three guarantees. From the day of your purchasing, if there is any quality problem, you can have the following warranty services:
1. From the purchasing day, after 3years or 100,000 kilometers, we will provide free services for you after confirmation. 2. We provide lifetime warranty, but we will charge an appropriate fee. 3. The following cases are not included in the three guarantees. 1) breaking out or rechanging artificially 2) the unresistable factors, such as natural disasters or car accidents, cause broken up 3) the purchasing information is not filled truly. 4. The right of final interpretation of these warranty policies belongs to OHC Co., Ltd. II. Warranty Certificate The certificate is the warranty certificate, please fill it carefully. If obliterated, it will be canceled. After filling it, please hand the second page to dealers or our company by express. User Stub of the first page Vehicle Model:
Type Model:
Bar Code:
The name of dealer or purchasing store:
Mob:
Stamp:
User Receipt of the second page Vehicle Model:
Type Model:
Clients Name:
Mob:
Add:
The name of dealer or purchasing store:
Mob:
Stamp:
License Plate Number:
Purchasing Date:
License Plate Number:
Purchasing Date:
Bar Code:
18 Guangzhou OHC Electronic Science and Technology Co., Ltd Add: Longshan Industrial D, 260 Yinglong Road, Tianhe District, Guangzhou Website: www.ohcmotors.com Mob: 020-87632885/87639693 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment