submitted | available | document details (if available) | source link |
---|---|---|---|
June 11 2019 | June 11 2019 | PS112说明书(修改) Administrator Corel PDF Engine Version 14.0.0.701 |
various | 15 GD-PSW1211 UserMan-US | Users Manual | 1.34 MiB | June 11 2019 |
GD-PSW1211 The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence ofuninsulated dangerous voltagewithin the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to a person. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)instructions in the literature accompanying the unit. Safety Precautions Warning: To prevent fire or electric shock ,do not expose this appliance to rain or moisture. IMPORTANT SAFEGUARDS Caution: Please carefully read all of the following important safeguards to ensure safe operation 1.Read lnstructions:
All the safety and operating instructions should be read before the appliance is operated. 2.Retain lnstructions:
The safety and operating instructions should be retained for future reference. 3.Follow lnstructions:
All operating instructions should be followed. 4.Heed Warnings:
All warnings on the unit and the operating instructions should be adhered to. 5.Power Source:
The appliance should be connected based on instructions. 6.Heat:
Keep the unit away from heat sources such as radiators,refrigerators,stoves or other appliances that may radiate heat. 7.Non-use Periods:
The power cord of the unit should be unplugged from the outlet when you do not use it for a long time. 8.Damage requiring service:
The unit should be repaired by qualified service personnel in the following cases:
a. The power plug or cable has been damaged:
b. Objects have fallen or liquid has been spilled on the appliance;
c. The appliance has been exposed to rain;
d.The appliance is functioning abnormally.
(1) Decoration light Trolley Function area Display screen Remote receiving Tweeter Decoration light Speaker light Air guide hole Function area LED breathing light Tweeter Decoration light Speaker light Air guide hole
(2) CONNECTIONS Accessories Instructlon Manual REMOTE CONTROL INSTRUCTLON MANUAL FM ANTENNA AUDIO CABLE Specifications Power: 1200W PEAK LED information display Bluetooth receiver USB flash & SD card reader FM receiver Microphone input 6.3mm x 2 Equalizer Wireless remote control unit LED Lighting Effects Speakers: 12" +3" x 2 Resistance: 3 ohm Power source: AC-110V-240Vac 50/60Hz +/-10%
(3) FRONT PANEL-CONTROLS AND FUNCTIONS VOLUME 1.STANDBY 2.Main Volume control 3.PLAY(PLAY/PAUSE MUSIC) 4.MODE(SWITCH TO USB/SD/
BLUETOOTH/AUX-IN) 5.PREV(PREVOUS SONG) 6.COLOR 7.LED-1 8.USB/SD CARD INPUT 9.EQ 10.NEXT(NEXT SONG) 11.LED-3 12.LED-2 13.MIC INPUT(TO INSERT WIRED MIC) 14.MIC.VOL 15.MIC.TREBLE 16.MIC.ECHO 17.BASS 18.TREBLE 19.AUDIO OUT 20.AUX IN 21.FM ANTENNA 22.POWER SWITCH(POWER ON/OFF) 23.CHARGING INPUT JACK(AC INPUT)
(4) REMOTE INSTRUCTION 0-9 keys Repeat Key (Single Repeat/Repeat All) Mode Key (Select between AUX/USB/
Volume +
Previous song Next song Play/Pause ( The sound will be muted 1.Power On/Standby 2.Mute 3. 4. 5. SD/BLUETOOTH/FMmodes) 6. 7. 8. 9. when paused ) 10. 11. Press again to stop recording) 12. ROCK/JAZZ/CLASSIC) 13.LED(ON/OFF) 14.MIC.VOL -
15.MIC.VOL +
Volume -
Record key (Press to start recording. Sound Mode Key(Choosebetween FLAT/POP/
USE OF THE REMOTE CONTROL Please operate the remote control within a distance of 6m and 30 between the remote and the appliance Aim the remote at the sensor. Remove all obstacles between the remote and the sensor The remote control might not work properly if the sensor is exposed to strong sunshine. lf the remote control doesn`t work properly, please check the batteries.
(5) HOW TO USE BLUETOOTH CONNECTION Dual Bluetooth Speaker SYSTEM 2 ways to enter or restart BT function 1.Press the Btinput button on Speaker is in Bluetoothmode Auto search and connect Speaker will enter auto seach it will search for the last connected device. Auto cnnect to the connected devlce The unit will automatically connect to the last connected device that Bluetooth is open with 20 metres in few seconds.
(Note: lf device cannot be connected automatically, press the buttons PLAY/PAUSE,PREVIOUS, NEXTto activate Bluetooth and re-connect the device.) When speaker cannot find the last connected device Speaker can be connected with new device USB the new devica search and connect to EDISON PS112"
(6)
(7) FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This product uses the FCC Data API but is not endorsed or certified by the FCC