DS-PD2-P10P-W Wireless 10m Pet Immune PIR Detector START This product and - if applicable - the supplied accessories too are marked with
"CE" and comply therefore with the applicable harmonized European Diagram References 1 2 3 4 REGISTRATION powered on. DIAGNOSTICS (Check Signal Strength before Mounting) Note: We also recommend doing a Walk Test of the system once the detector is mounted (ENGINEER TESTS menu). OPTIONAL WIRED TAMPER & OPTIONAL BRACHETS CHANGE INPUTS (PROGRAM INPUTS) HIGH LOW HIGH LOW
+
+
+
+
+
+
+
+
LED ON LED OFF TAMPER
+
CR123A LITHIUM BATTERY
-
+
-
REAR TAMPER See Sec
=
=
Detec on Range Detec on Angle Detec on Zones Detec on Speed Moun ng Height Lens characteris cs Key features Animal immunity Blue Wave technology Digital temperature compensa on Tamper protec on Signal Strength Indicators (SSI) Electrical & ba ery 10m 85 5 planes and 52 zone 0.3 - 3.0 m/s 1.8-2.4m 25kg yes yes Front and rear yes Transmission frequency Range in open space 3V lithium ba ery included Minimum ba ery life (years) 433MHz 800m 1x CR123A 2 Environment features Opera ng temperature Weight Dimensions Direct light lter Electrical conformity Warranty
-10C /+40C 125g 117 x 69 x 50mm 6500 Lux Cer ca on and warranty CE 2 years Accessories Ceiling mounted bracket included Wall mounted bracket included yes yes The Volumetric Lens HORIZONTAL COVERAGE 10m 9m 8m 7m 6m 5m 4m 3m 2m 1m 85 56 zones 6 planes
<25kg 1 Registering via Security Control Panel Control Panel
Register Detector
Unregister Detector Delete the Detector from the Control Panel thrternately. Note: The distance between the security control panel and the detector should be less than 50 cm. thrtogether. 2 5s
+
-
6 7
<25kg
>25kg 1m 2m 3m 4m 5m 6m 7m 8m VERTICAL COVERAGE 2.4m 9m 10m Mount at 2.1m for INCERT compliance
. 3 1m 2m 3m 4m 5m 6m 7m 8m 9m 10m When disposing of the pro ry must be removed and disposed of separately in accordance with the local regul ons. BRACKETW
(Wall) E C A B D A LEARN
Registering via APP 1 1 Log in to the APP Store and input Hik-Connect to search the mobile client. 2 Download and install Hik-Connect to your phone. 3 mralA 4 Power on the security control panel. 5 Log in the Hik-Connect and ap the icon + at the upper-right coner of the Hik-Connect page to add the security control panel. You can scan the QR code on the device rear panel or on the package box, or input the device serial No. manually to add the device. REAR TAMPER BREAK - OUT 4 BRACKETC
(Ceiling) B C END
User Manual COPYRIGHT 2018 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED.
referred to be the Manual) cannot be reproduced, changed,
the Manual. About this Manual This manual is applicable to detector.
Please use this user manual under the guidance of professionals. Trademarks Acknowledgement and other Hikvisions trademarks and logos are the
approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
radiate radio frequency energy and, if not installed and used in
equipment does cause harmful interference to radio or television
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
1. This device may not cause harmful interference. 2. This device must accept any interference received, including