Handheld Thermal Monocular Camera User Manual Handheld Thermal Monocular Camera User Manual Legal Information 2021 Hangzhou Microimage Software Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the HIKMICRO website
(www.hikmicrotech.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks Acknowledgement and other HIKMICROs trademarks and logos are the properties of HIKMICRO in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. LEGAL DISCLAIMER TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKMICRO MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKMICRO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKMICRO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKMICRO SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKMICRO WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ILLEGAL HUNTING ANIMALS, INVASION OF PRIVACY OR ANY OTHER PURPOSE WHICH IS ILLEGAL OR DETRIMENTAL TO THE PUBLIC INTEREST. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF i Handheld Thermal Monocular Camera User Manual CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. ii Handheld Thermal Monocular Camera User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV techniciaan for help FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with
"CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info iii Handheld Thermal Monocular Camera User Manual 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead
(Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info. Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. 1. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: this device may not cause interference, and this device must accept any interference, including interference that may cause undesired operation of the device. 2. 1. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes : l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. 2. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. iv Handheld Thermal Monocular Camera User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Danger Caution Note Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Provides additional information to emphasize or supplement important points of the main text. v Handheld Thermal Monocular Camera User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. Laws and Regulations Use of the product must be in strict compliance with the local electrical safety regulations. Transportation Keep the device in original or similar packaging while transporting it. Keep all wrappers after unpacking them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and the company shall not take any responsibilities. Do not drop the product or subject it to physical shock. Keep the device away from magnetic interference. Power Supply Please purchase the charger by yourself. Input voltage should meet the Limited Power Source (5 VDC, 2A) according to the IEC61010-1 standard. Please refer to technical specifications for detailed information. Make sure the plug is properly connected to the power socket. DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards caused by overload. Battery The built-in battery cannot be dismantled. Please contact the manufacture for repair if necessary. For long-term storage of the battery, make sure it is fully charged every half year to ensure the battery quality. Otherwise, damage may occur. Maintenance If the product does not work properly, please contact your dealer or the nearest service center. We shall not assume any responsibility for problems caused by unauthorized repair or maintenance. Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary. If the equipment is used in a manner not specified by the manufacturer, the protection provided by the device may be impaired. Using Environment Make sure the running environment meets the requirement of the device. The operating temperature shall be -20C to 55C (-4F to 131F), and the operating humidity shall be 95% or less. vi Handheld Thermal Monocular Camera User Manual DO NOT expose the device to high electromagnetic radiation or dusty environments. DO NOT aim the lens at the sun or any other bright light. Emergency If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center. Manufacture Address Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,Binjiang District, Hangzhou, Zhejiang 310052, China Hangzhou Microimage Software Co., Ltd. COMPLIANCE NOTICE: The thermal series products might be subject to export controls in various countries or regions, including without limitation, the United States, European Union, United Kingdom and/or other member countries of the Wassenaar Arrangement. Please consult your professional legal or compliance expert or local government authorities for any necessary export license requirements if you intend to transfer, export, re-export the thermal series products between different countries. vii Handheld Thermal Monocular Camera User Manual Chapter 1 Overview 1.1 Brief Description The handheld thermal monocular camera is a handheld device with functions of observation, highest temperature target tracking, distance measurement, Wi-Fi hotspot, and so on. The high-
sensitivity built-in thermal detector provides you with clear view even in total darkness. The device is mainly applied to outdoor scenarios such as patrolling, law enforcement, searching and rescuing, drug enforcement, anti-smuggling, criminal seizing, hiking, travel, and hunting, etc. 1.2 Function Distance Measurement The device can detect the distance between the target and the observation position. Highest Temperature Tracking The device can detect the highest temperature in the scene and mark the spot. This function varies according to different camera models. Image Correction The device supports DPC (Defective Pixel Correction) and FFC (Flat Field Correction) which can optimize the image quality. Client Software Connection The device can capture snapshots, record videos, and set parameters by T-Vision APP after being connected to your phone via hotspot. Storage The built-in memory module supports video recording and snapshot capturing. 1 Handheld Thermal Monocular Camera User Manual 1.3 Appearance 1.3.1 Button Figure 1-1 Buttons on The Device Table 1-1 Function of Button Icon Button Function Power Capture Mode Zoom Press: standby mode/wake up device Hold: power on/off Press: capture Hold: recording Press: palettes Hold: menu Press: digital zoom Hold: FFC 2 Handheld Thermal Monocular Camera User Manual 1.3.2 Interface Figure 1-2 Overview of Interfaces Lens Cover: protect the lens from dust or scratch. Diopter Adjustment Knob: adjust the view according to your degree of myopia. Cable Interface: charge the device or export files with the supplied cable. Tripod Screw: connected to tripod. 3 Handheld Thermal Monocular Camera User Manual Chapter 2 Preparation Take out the device and accessories. Check them with the packaging list to confirm device and accessories are included and available for use. Read the user manual to learn the usage methods and cautions. 2.1 Charge Device After the device starts up, the OSD (on-screen display) shows the battery status. When the battery is low, charge the device and ensure it works properly. Before You Start The charging temperature should be from 0 C to 45 C (32 F to 113 F). Charge the device with the delivered cable. Steps 1. Lift the cable interface cover. 2. Plug in the cable and charge the device. Figure 2-1 Cable Interface Flashing Red & Green: error occurred. Solid Red: battery is properly charged. Solid Green: battery is fully charged. Off: battery is not charged. 2.2 Power On/Off Power On 4 Handheld Thermal Monocular Camera User Manual When the device is connected to cable or the battery is enough, press power on the device. for 2 seconds to Power Off When the device is turned on, hold for 2 seconds to power off the device. 2.3 Menu Description When the device powers on, hold to display the menu. Figure 2-2 Menu Description Press Press Press to move the cursor up. to move the cursor down. to confirm and hold it to exit the menu. 5 Handheld Thermal Monocular Camera User Manual Chapter 3 Image Settings You can set palettes, brightness, scenes, FFC (flat field corrrection), and DPC (defective pixel correction) to display the best image effect. 3.1 Adjust Diopter Make sure the eyepiece covers your eye and aim at the target. Adjust the diopter adjustment knob until the OSD text or image is clear. Note When adjusting diopter, DO NOT touch the surface of lens to avoid smearing the lens. Figure 3-1 View the Target 6 Handheld Thermal Monocular Camera User Manual Figure 3-2 Adjust Diopter 3.2 Focus Lens Slightly rotate the focus wheel to focus the objective lens. Figure 3-3 Adjust Objective Lens Note DO NOT touch the lens directly with your finger, or place any sharp objects near them. This function varies according to different camera models. 7 Handheld Thermal Monocular Camera User Manual 3.3 Adjust Brightness and press Select brightness is, the brighter the image is. The image effect in white hot mode is showed as picture below and effect in black hot mode is opposite. to adjust brightness. In white hot mode, the higher the value of Figure 3-4 Adjust Brightness in White Hot Mode 3.4 Adjust Contrast Select and press to adjust image contrast. 3.5 Select Scene You can select proper scene according to actual using scene to improve the display effect. Steps 1. Hold 2. Select 3. Hold to go to the menu. and press to switch scene. refers to recognition mode and is recommended in normal scene. refers to jungle mode and is recommended in hunting environment. to save settings and exit. 3.6 Set Palettes You can select different palettes to display the same scene in different effects. Press switch palettes. to White Hot The hot part is light-colored in view. The higher the temperature is, the lighter the color is. 8 Handheld Thermal Monocular Camera User Manual Black Hot The hot part is black-colored in view. The higher the temperature is, the more black the color is. Red Hot The hot part is red-colored in view. The higher the temperature is, the redder the color is. Fusion 9 Handheld Thermal Monocular Camera User Manual From high temperature to low temperature, the image is colored in from white, yellow, red, pink to purple. 3.7 Adjust Digital Zoom You can zoom the image by using this function. Press in the view mode, the live view switches between 1 , 2 , 4 , and 8 . Note This function varies according to different camera models. 3.8 Flat Field Correction This function can correct non-uniformity of display. Steps 1. Hold 2. Select to go to the menu. and press to switch FFC mode. Manual: Hold in live view to correct the non-uniformity of display. Auto: The device performs FFC automatically according to the set schedule when switching on the camera. External: Cover the lens cover, then hold in live view to correct the non-uniformity of display. 3. Hold to save the settings and exit. 10 Handheld Thermal Monocular Camera User Manual 3.9 Correct Defective Pixel The device can correct the defective pixels on the screen which are not performed as expected. Steps 1. Hold 2. Select 3. press 4. Press 5. Press to show the menu. to select the offset. The offset refers to the moving length of cursor. or to select the moving direction. to move the cursor to the position of dead pixel. Hold to correct the dead pixel. Note If the menu blocks the dead pixel, hold to perform mirror display. 11 Handheld Thermal Monocular Camera User Manual Chapter 4 Measure the Distance The device can detect the distance between the target and the observation position. Before You Start When measuring the distance, keep the hand and the position steady. Otherwise, the accuracy may be affected. Steps 1. Hold 2. Select to show the menu. and press or 1) Press 2) Set the target height. to go to the setting interface. to select the target from Deer, Wolf, Bear, and Custom. Note The available height ranges from 0.1 m to 9.9 m. 3) Press to confirm. 3. Align the center of top mark with the edge of target top. Press
. Figure 4-1 Set the Edge of Target Top The cursor blinks on the top edge of the target. 4. Align the center of bottom mark with the edge of target bottom. Press
. 12 Handheld Thermal Monocular Camera User Manual Figure 4-2 Set the Edge of Target Bottom Result The left top of the image displays the distance measurement result and the height of the target. Figure 4-3 Measurement Result Note Go to distance measurement interface, and press measuring target. to view the result of the previous 13 Handheld Thermal Monocular Camera User Manual Chapter 5 Set Burn-Prevention In the menu, select function can prevent the detector of the thermal channel from being burned. After you enable this function, the shield will close when the grey scale of the detector reaches a certain value. to enable or disable the burn-prevention function. This and press Note When the burn-prevention function is disabled, the shield opens automatically. 14 Handheld Thermal Monocular Camera User Manual Chapter 6 Highest Temperature Tracking The device can detect the highest temperature spot in the scene and mark it on display. In the menu, select When the function is enabled, changes, the to mark the spot of highest temperature. displays in the spot of highest temperature. When the scene and press moves. Note This function varies according to different camera models. 15 Handheld Thermal Monocular Camera User Manual Chapter 7 Picture and Video You can manually record video or capture picture when displaying live view. 7.1 Capture Picture On the main live view page, press to capture picture. Note When capturing succeeds, the image freezes for 1 second and a prompt shows on the display. For exporting captured pictures, refer to Export Files. 7.2 Record Video Steps 1. In the main live view, hold and start recording. The left top of image displays the information of recording time. 2. Hold again to stop recording. Figure 6-1 Start Recording What to do next For exporting recording files, refer to Export Files. 16 Handheld Thermal Monocular Camera User Manual 7.3 Export Files This function is used to export recorded videos and captured pictures. Before You Start Turn off hotspot function. Steps 1. Connect the device and PC with cable. Note Make sure the device is turned on when connecting the cable. 2. Open computer disk and select the disk of device. Go to the DCIM folder and find the folder named after the capture year and month. For example, if you capture a picture or record a video on June 2021, go to DCIM 202106 to find the picture or video. 3. Select and copy the files to PC. 4. Disconnect the device from your PC. Note The device displays images when you connect it to PC. But functions such as recording, capturing and hotspot are disabled. When you connect the device to PC for the first time, it installs the drive program automatically. You can also use the T-Vision app to export files. 17 Handheld Thermal Monocular Camera User Manual Chapter 8 Client Software Connection Connect the device to the T-Vision APP via hotspot, then you can capture picture, record video, or configure parameters on your phone. Steps 1. Hold 2. Press 3. Turn on the WLAN of your phone and connect to the hotspot. to show the menu of device. to enable hotspot function. Hotspot Name: HIK-IPTS Serial No. Hotspot Password: the last 9 digits of serial No. 4. Search the T-Vision on App Store (iOS System) or Google Play (Android System) to download it, or scan the QR code to download and install the app. Android System iOS System 5. Open the APP and connect your phone with the device. You can view the interface of device on your phone. Note The hotspot function will be turned off automatically when power is less than 15%. 18 Handheld Thermal Monocular Camera User Manual Chapter 9 CVBS Output You can view the image on the display unit for details with this function. Before You Start Purchase the CVBS cable from the manufacturer separately or prepare it by yourself. Connect the device and the display unit via USB to CVBS cable. Make sure the device is turned off when connecting the cable. Steps 1. Hold 2. Select CVBS, and press to show the menu of device. to turn on CVBS output. The display unit show the device image. 19 Handheld Thermal Monocular Camera User Manual Chapter 10 Maintenance This part introduces the operation of checking device information, upgrading device, and restoring to defaults, etc. 10.1 View Device Information Steps 1. Hold 2. Select to show the menu of device.
, and press
. You can view the device information such as version, and serial No. 10.2 Upgrade Device Before You Start Please get the upgrade package first. Steps 1. Connect the device to your PC with cable. 2. Open the detected disk, copy the upgrade file and paste it to the root directory of the device. 3. Disconnect the device from your PC. 4. Reboot the device. Result The device upgrades automatically. The upgrading process will be displayed in the main interface. 10.3 Restore Device Steps 1. Hold 2. Select to show the menu of device.
, and press to restore the device to defaults according to the prompt. 20 Handheld Thermal Monocular Camera User Manual Chapter 11 Frequently Asked Questions 11.1 Why does the charge indicator flash improperly?
Check the following items. 1. Check whether the device is charged with standard power adapter and the charging temperature is above 0 C (32 F). 2. The device is equipped with built-in charging protection module. Charge the device in power off status. 11.2 Why is the power indicator off?
Check whether the device is off-battery. Check the indicator after charging the device for 5 minutes. 11.3 The image is not clear, how to adjust it?
Adjust the diopter adjustment knob until the image is clear. Refer to section Adjust Diopter. 11.4 Capturing or recording fails. What's the problem?
Check the following items. Whether the device is connected to your PC. Capturing or recording is disabled in this status. Whether the storage space is full. Whether the device is low-battery. 11.5 Why the PC cannot identify the device?
Check the following items. Whether the device is connected to your PC with supplied USB cable. If you use other USB cables, make sure the cable length is no longer than 1 m. Whether the hotspot function is turned on. If so, go to device menu and turn off hotspot. 21 Handheld Thermal Monocular Camera User Manual Chapter 12 Appendix 12.1 Device Command Scan the following QR code to get device common serial port commands. Note that the command list contains the commonly used serial port commands for Hikmicro thermal cameras. 12.2 Device Communication Matrix Scan the following QR code to get device communication matrix. Note that the matrix contains all communication ports of Hikmicro thermal cameras. 22 UD25187B