TYBT2 ,TYBT2-IPEX UserManual TuYa Smart BLE Module-TYBT2 Contents 1. Product Overview .........................................................................................................................2 1.1 Features ...............................................................................................................................2 1.2 Main Application Fields .....................................................................................................2 2. Dimensions and Footprint .............................................................................................................3 2.1 Dimensions .........................................................................................................................3 2.2 Pin definition ......................................................................................................................3 3. Electrical Characteristics ..............................................................................................................4 3.1 Absolute Maximum Ratings ...............................................................................................4 3.2 Electrical Conditions ...........................................................................................................4 3.3 Transmitting Current Consumptions ................................................................................5 4. Radio Specification .......................................................................................................................5 4.1 Basic Radio Frequency Characteristics ...............................................................................5 4.2 Transmitting Power .............................................................................................................5 4.3 Receiving Sensitivity ..........................................................................................................5 5.Antenna Information ......................................................................................................................6 5.1 Antenna type .......................................................................................................................6 5.2 Reduce Antenna Interference ..............................................................................................6 6.Packaging information and production guide ................................................................................7 6.1 Mechanical dimensions .......................................................................................................7 6.2 Production Guide ................................................................................................................7 1 Version1.0.0 TYBT2 ,TYBT2-IPEX UserManual 1. Product Overview TYBT2 is a Bluetooth (BLE) module designed by Hangzhou Tuya Information Technology Co., Ltd. The BLE Module consists of a highly integrated wireless Bluetooth chip TLSR8266 and some extra electric circuits that have been programed with Bluetooth network protocol and plenty of software examples. TYBT2 include a 32-bit CPU, 512K byte flash, 16k SRAM, and 9 multiplex IO pins. 1.1 Features Integrated low power consumption 32-bit CPU, also known as application processor Basic frequency of the CPU can support 48 MHz Supply voltage range: 1.9V to 3.6V Peripherals: 5PWM,1I2C, 1*UART BLE RF features:
Compatible with BLE 4.0 Transmitting data rate can go up to 1Mbps RX receiving sensitivity: -92dBm AES hardware encryption On-board PCB antenna/IPEX connector Antenna Operating temperature range: -20 to 85 1.2 Main Application Fields Intelligent LED Intelligent household applications Intelligent low-power consumption sensors 2 Version1.0.0 TYBT2 ,TYBT2-IPEX UserManual 2. Dimensions and Footprint 2.1 Dimensions TYBT2 have double sides of pins. The distance between each Pin is 2.0mm. Size of TYBT2: 15mm(W)*16.5mm(L). Figure 2 shows the dimensions of TYBT2. 2.2 Pin definition Table 1. The typical pin definition of TYBT2 PIN NO. NAME TYPE DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 SDA SCL G B WW CW R 3.3V TX RX GND SW RST GND I/O I/O I/O I/O I/O I/O I/O P I/O I/O P I/O I P I2C, data interface, internal pull-up 4.7k resistance interface, internal pull-up 4.7k I2C, clock resistance normal IO pin, can be used as PWM output pin, default for Green LED line normal IO pin, can be used as PWM output pin, default for Blue LED line normal IO pin, can be used as PWM output pin, default for Warm White LED line normal IO pin, can be used as PWM output pin, default for Cold White LED line normal IO pin, can be used as PWM output pin, default for Red LED line Supply voltage UART TX,can be used as normal IO pin UART RX,can be used as normal IO pin Ground Bluetooth chipset burning pin reset pin for the module,internal pull-up 4.7k Ground 3 Version1.0.0 TYBT2 ,TYBT2-IPEX UserManual Note: P: Power supply pins; I/O: Digital input or output pins. SW pin is ONLY used for burning firmware, Can NOT be used for other functions. While Pin4 and Pin12 are used for I2C functions, external 4.7k pull-up resistances are necessary. When WW pin is outputting PWM signal, It has opposite phase comparing the PWM signal from R/G/B/CW pin. If theres any customization needed for PWM output, please contact our BD manager. 3. Electrical Characteristics 3.1 Absolute Maximum Ratings Table 2. Absolute Maximum Ratings PARAMETERS Ts VCC Electrostatic release quantity
(Human body model) Electrostatic release quantity
(Machine model) DESCRIPTI ON Storage temperature Supply voltage TAMB-25 TAMB-25 MIN MAX UNIT
-20
-0.3
-
-
85 3.9 2 0.5 V KV KV 3.2 Electrical Conditions Table 3. Electrical Conditions Paramet ers Description Min Typ Max Unit Ta Temperature for Commercial grade VCC Supply voltage VIL VIH VOL VoH IO negative level input IO positive level input IO negative level output IO positive level
-20 2.5
-0.3 VCC*0.75
-
VCC*0.8
-
3.3
-
-
-
-
85 3.6 VCC*0.25 VCC VCC*0.1 VCC V V V V V 4 Version1.0.0 TYBT2 ,TYBT2-IPEX UserManual output 3.3 Transmitting Current Consumptions Table 4. TX current consumption PARAMETERS MODE TYPICAL UNIT Irx IDC Continuously receiving Normal working mode 13 80 mA uA 4. Radio Specification 4.1 Basic Radio Frequency Characteristics Table 5. Basic Radio frequency characteristics Parameter Working Frequency Radio standard Data transmitting rate Description 2.4GHz ISM band BLE 4.0 1Mbps Type of Antenna On-board PCB Antenna ananddAND and IPEX connector Antenna 4.2 Transmitting Power Table 6. Transmitting power PARAMETERS RF output power consumption 20dB bandwidth 4.3 Receiving Sensitivity MIN TYPICA L
-
6.45
-
1000 MA X
-
-
UNI T dBm KHz Table 7. Receiving sensitivity Parameter RX sensitivity Frequency bias error Co-channel interference Restrain 1Mbps
-
-
Min
-93
-300
-
Typ Max Unit
-90
-92 dBm 300 KHz
-
-7
-
dB 5 Version1.0.0 TYBT2 ,TYBT2-IPEX UserManual 5.Antenna Information 5.1 Antenna type Antenna for TYBT2 module is using On-board PCB antenna Antenan for TYBT2-IPEX module is using IPEX connector Antenna 5.2 Reduce Antenna Interference In order to have the best RF performance, Its recommended to keep a minimum 15mm distance between the antenna part and the other metal pieces. Since PCBA manufacture use SMT process to weld TYBT2 module and other electrical components onto the PCB board, RF performance will depend on the layout location and pattern of the On-board PCB antenna. The following figures are some recommended and dis-
recommended demonstrations from out R&D team. In demonstration 1 and 2 of figure 3, the on-board PCB antenna lays outside of the PCB frame. Its recommended to use layout pattern shown in demonstration 1 and 2. Either the on-
board PCB antenna lays outside of the PCB frame directly or PCB frame carve out a certain area for the antenna. The overall PCBA performance for these two ways will be the same as testing the module independently. Restricted due to some reason, if the on-board PCB antenna layout has to be inside the PCB frame, its suggested to refer to demonstration 3. The antenna lays inside the PCB frame, but no copper or wire beneath the antenna. RF performance will have some loss, approximately 1~2 dBm. Its NOT recommended to use demonstration 4, the antenna lays inside the PCB frame, and there are copper and wire beneath it. RF performance will have significant attenuation. Figure 3. layout demonstrations Demonstration 1: Anteennnna lay outside the Demonstration 2: Antennnnaa lay outside PCB fraramme the PCB frame with ccaarved area 6 Version1.0.0 TYBT2 ,TYBT2-IPEX UserManual Demonstration 3: Antenna l laay inside the PCB Demonstration 4: Antenna lay innsside the PCB frame without copper or wr wire beneath it frame with copper or wire bebeneath it 6.Packaging information and production guide 6.1 Mechanical dimensions Figure 4 Dimensions of the module 6.2 Production Guide The storage for the delivered module should meet the following condition:
1.The anti-moisture bag should be kept in the environment with temperature < 30 and humidity < 85% RH. 2. The expiration date is 6 months since the dry packaging products was sealed. Cautions:
1. 2. All the operators should While operating, water and dirt should not have any contact with the modules. trostatic ring in the whole process of wear elec production. Version1.0.0 7 TYBT2 ,TYBT2-IPEX UserManual Regulatory Module Integration Instructions This device complies with part 15.247 of the FCC Rules. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The antenna is PCB Antenna and IPEX antenna ,maximum gain is 2.0dBi . This module has been granted modular approval for mobile applications. OEM integrators for host products may use the module in their final products without additional FCC certification if they meet the following conditions. Otherwise, additional FCC approvals must be obtained. The host product with the module installed must be evaluated for simultaneous transmission requirements. The users manual for the host product must clearly indicate the operating requirements and conditions that must be observed to ensure compliance with current FCC RF exposure guidelines. To comply with FCC regulations limiting both maximum RF output power and human exposure to RF radiation, use this module only with the included onboard antenna. The final host / module combination may also need to be evaluated against the FCC Part 15B criteria for unintentional radiators in order to be properly authorized for operation as a Part 15 digital device. FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. FCC Label Instructions:
The outside of final products that contains this module device must display a label referring to the enclosed module. This exterior label can use wording such as: Contains Transmitter Module FCC ID: 2ANDLTYBT2,or Contains FCC ID: 2ANDLTYBT2, Any similar wording that expresses the same meaning may be used. 8 Version1.0.0