Company: Hangzhou Tuya Information Technology Co.,Ltd Address: Room701,Building3,More Center,No.87 GuDun Road, Hangzhou,Zhejiang, China Tel: 86-571-86581786 Fax: 86-571-86581786 Date (12/24/2019) Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Modular Approval Request FCC ID: 2ANDL-WBR2 The following attestation addresses the requirements to support modular approval:
Modular approval requirement Yes (provide brief statement) No *
(a) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly The module has a metal shied. Refer to the external photo of EUT.
(b) The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal Data to the modulation circuit is buffered as described in the operational description provided with the application.
(c) The module must contain power supply regulation on the module The module contains its own power supply regulation. Please refer to schematic filed with this application.
(d) The module must contain a permanently attached antenna, or The module has a PCB antenna arrangement for Wi-Fi and BLE. Company: Hangzhou Tuya Information Technology Co.,Ltd Address: Room701,Building3,More Center,No.87 GuDun Road, Hangzhou,Zhejiang, China Tel: 86-571-86581786 Fax: 86-571-86581786 contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b)
(e) The module must demonstrate compliance in a stand-alone configuration
(f) The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements)
(g) The module must comply with all specific rules applicable to the transmitter. The grantee must provide comprehensive instructions to explain compliance requirements Refer to the photo of EUT. The module was tested stand-
alone as shown in test setup photographs filed with this application. The device is too small so that the information required FCC ID will be put on the user manual and packaging. Refer to the label of EUT and user manual. The module comply with all specific rules.Refer to the datasheet. Modular approval requirement Yes (provide brief statement)
(h) The module must comply with RF exposure requirements The module meets Portable exclusion levels as shown in the RF exposure information filed with this application.
* Please provide a detailed explanation if the answer is No. Yours sincerely, Name:
Title:
General Manager No *