FCC ID: 2AZCV-WP1851M WIRELESS CHARGER

Alloy Magnetic Wireless Charger User Manual | Manual de usuario | Manuel dutilisateur IMPORTANT English NOTE: This charger is designed for Qi-compatible devices. If your phone does not have built-in Qi wireless charging capabilities, please use a certified Qi wireless charging case or receiver. Refer to your phones user manual for detailed features and functions. X NO Metal X NO Thick Case Phone cases that contain metal, magnets, or are thicker than 3mm will interfere with wireless charging. IMPORTANT English Wireless Charger Output 15W/10W/7.5W/5W 5ft 1.5m USB-C Cable This charger magnetically snaps to the back of an iPhone 12 or to its MagSafe case or sleeve (sold separately) and aligns iPhone properly, allowing you to hold and use iPhone while its charging. You can also use MagSafe Charger with other phone models that support wireless charging. INSTRUCTIONS English Plug the USB-C connector to a 20W PD or greater USB-C power adapter or compatible third-party USB-C adapter

(9V/2.22A or 9V/2.56A and higher).

*charger sold separately. NOTE: You can also connect to a USB-C port on a Mac or PC. The charger will also function with power adapters that provide a minimum 12W (5V/2.4A) of power, but this will result in slower charging. INSTRUCTIONS English iPhone 12 models Place the charger on the back of the iPhone or its MagSafe case or sleeve. When the iPhone starts charging, the green charging symbol appears. NOTE: If an iPhone Leather Wallet is attached, remove it before placing the charger on the back of the case. Other phones Place the phone face up on the center of the charger. When the phone is aligned properly with the charger, the Battery Charging icon appears in the status bar. Standby Charging Foreign Object Detected Its normal for a wireless charger and your device to become warm while charging. Need help? Visit www.naztech.com for additional product information or contact info@naztech.com IMPORTANT English Read all safety instructions and warnings prior to using this product. Improper use and failure to follow safety guidelines could result in hazards, injury and/or property damage that is not the manufacturers responsibility. The user is responsible for maintaining this product with care for maximum use. 1. Do not place metal objects, magnets, magnetic stripe cards, and hard drive based devices near the wireless charger. It may cause data corruption. 2. Do not attempt to modify, disassemble, or repair this product. 3. Do not expose to water, moisture, or extreme temperatures (below 40F or above 90F). 4. Under any circumstances, if you find this product rapidly increasing in temperature, emitting odor, or demonstrating an abnormal phenomenon, discontinue use immediately. Contact info@naztech.com to submit a warranty claim. Proof of purchase is required IMPORTANTE Espaol NOTA: Este cargador est diseado para dispositivos compatibles con Qi. Si su telfono no tiene capacidades de carga inalmbrica Qi incorporadas, use un receptor o estuche de carga inalmbrica certificada Qi. Consulte el manual del usuario de su telfono para conocer las caractersticas y funciones detalladas. X NO Metal X NO Estuche grueso Los estuches del telfono que contienen metal, imanes o tienen un grosor superior a 3mm interferirn con la carga inalmbrica. IMPORTANTE Espaol Cargador inalmbrica Salida 15W/10W/7.5W/5W 5ft 1.5m Cable USB-C El cargador se adjunta de forma magntica a la parte posterior del iPhone 12 o a una funda MagSafe (se vende por separado) y se ajusta correctamente, lo que permite agarrar y usar el iPhone mientras se recarga. Tambin puedes usar el cargador con otros modelos de telfono compatibles con carga inalmbrica. INSTRUCCIONES Espaol Enchufe el conector USB-C a un adaptador de corriente USB-C de 20W PD o superior o un adaptador USB-C certificado de tercero (9V/2.22A o 9V/2.56A y superior).

*cargador se vende separadamente NOTA: Tambin puede conectarse a un puerto USB-C en una Mac o PC. El cargador tambin funcionar con adaptadores de corriente que proporcionen un mnimo de 12W (5V/2.4A) de poder, pero esto resultar en una carga ms lenta. INSTRUCCIONES Espaol Modelos de iPhone 12 Coloca el cargador MagSafe en la parte posterior del iPhone o de su funda MagSafe. Cuando el iPhone comience a recargarse, se mostrar el smbolo verde de recarga. NOTA: Si el iPhone tiene la cartera de piel, qutala antes de colocar el cargador en la parte posterior de la funda. Otros telfonos Coloca el telfono boca arriba en el centro del cargador. Cuando el telfono est alineado correctamente con el cargador, el cono de recarga de la batera aparece en la barra de estado. Listo Carga Objeto extrao detectado Es normal que un cargador inalmbrico y su dispositivo se calienten durante la carga. Necesita ayuda? Visite www.naztech.com para obtener informacin adicional sobre el producto o pngase en contacto con info@naztech.com IMPORTANTE Espaol Lea todas las instrucciones de seguridad y advertencias antes de usar este producto. El uso incorrecto y el incumplimiento de las normas de seguridad podran provocar peligros, lesiones, y/o daos materiales los cuales no son parte de la responsabilidad del fabricante. El usuario es responsable de mantener este producto con precaucin para mximo utilizacin. 1. No coloque materiales extraos, como objetos metlicos, imanes y tarjetas con banda magntica, entre el dispositivo mvil y el cargador inalmbrico. Puede causar daos en los datos. 2. No intente modificar, desmontar o reparar este producto. 3. No exponga al agua, humedad, o temperaturas extremas (por debajo de 40F o por encima de 90F). 4. Si encuentra este producto aumentando rpidamente de temperatura, emitiendo olor, deformado, erosionado o mostrando un fenmeno anormal, descontine el uso inmediatamente. Garanta limitada de por vida. Pngase en contacto con info@naztech. com para someter una reclamacin de garanta. Se requiere una prueba de compra. IMPORTANT Franais REMARQUE: Ce chargeur est conu pour les appareils compatibles Qi. Si votre tlphone ne possde pas de fonctions de recharge sans fil Qi intgres, veuillez utiliser un botier ou un rcepteur de recharge sans fil certifi Qi. Reportez-vous au mode demploi de votre tlphone pour les caractristiques dtailles et les fonctions. X PAS de Mtal X PAS dtui pais Les tuis de tlphone contenant du mtal, des aimants ou dune tui suprieure 3mm peuvent interfrer avec le chargement sans fil. IMPORTANTE Franais Chargeur sans fil Sortie 15W/10W/7.5W/5W 5ft 1.5m Cble USB-C Le chargeur senclenche magntiquement larrire dun iPhone 12 ou de son tui ou coque MagSafe (vendu sparment) et aligne correctement liPhone, vous permettant de tenir et dutiliser liPhone pendant le chargement. Vous pouvez galement utiliser le chargeur avec dautres modles de tlphone qui prennent en charge la recharge sans fil. DIRECTIVES Franais Branchez le connecteur USB-C dans un adaptateur secteur USB-C de 20W PD ou suprieur ou un adaptateur USB-C de tiers certifi (9V/2.22A ou 9V/2.56A et plus).

*chargeur vendu sparment REMARQUE: Vous pouvez galement vous connecter un port USB-C sur un Mac ou un PC. Le chargeur fonctionnera galement avec des adaptateurs dalimentation qui fournissent une puissance minimale de 12W (5V/2.4A), mais cela entranera une charge plus lente. www.naztech.com FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. approved by the party.

-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly Responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Appendix FCC ID Label FCC ID: 2AZCV-WP1851M Model: HKWP1851M-15E This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Size for the label: 10mm X 10mm FCC ID: 2AZCV-WP1851M TB-RF-074-1.0 Appendix ID Label Location ID LOCATION 8 FCC ID: 2AZCV-WP1851M TB-RF-075-1.0

HANK ELECTRONICS VIETNAM LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03/24/2021 Subject; Request for Confidentiality FCC ID: 2AZCV-WP1851M To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirement External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Wen Cheng Title: Certification Engineer

HANK ELECTRONICS VIETNAM LTD Letter of Authorization Company:

Address:

HANK ELECTRONICS VIETNAM LTD No.7, 11 Street VSIP Tu Son, 16353 Bac Ninh Province, Vietnam 2AZCV-WP1851M Product Name: WIRELESS CHARGER Model Number: HKWP1851M-15E FCC Identifier:

We authorize MiCOM LabsInc, 575 Boulder Court, Pleasanton, California94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM LabsInc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Wen Cheng Date: 2021-03-24 Title: Certification Engineer Signature of applicant