FCC ID: XQIWLTABLET Wireless Tablet

Wireless Tablet Users Manual Hanwang Technology Co., Ltd. Copyright Hanwang Technology Co., Ltd, 2009 All rights reserved. No part of this manual may be reproduced except for your express personal use. Hanwang Technology Co., Ltd reserves the rights to revise this publication without obligation to provide notification of such changes. Hanwang Technology Co., Ltd does its best to provide current and accurate information in this manual. However, Hanwang Technology Co., Ltd reserves the right to change any specifications and product configurations at its discretion, without prior notice and without obligation to include such changes in this manual. Hanvon are registered trademarks of Hanwang Technology Co., Ltd. Microsoft, Windows, and Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Apple, the Apple logo, and Macintosh are registered trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Any additional company and product names mentioned in this documentation may be trademarked and /or registered as trademarks. Mention of third-party products is for information purposes only and constitutes neither an endorsement nor a recommendation. Hanwang Technology Co., Ltd assumes no responsibility with regard to the performance or use of these products. Contents CHAPTER 1 GRAPHICS TABLET INTRODUCTION.......................1 1.1 GENERAL INTRODUCTION................................................................1 1.2 FEATURES........................................................................................1 CHAPTER 2 QUICK-START TUTORIAL............................................2 2.1 SETUP STEPS ..................................................................................2 2.2 ILLUSTRATION OF WIRELESS TABLET..............................................3 2.3 WAKE UP TABLET ............................................................................6 2.4 SWITCH CHANNEL OF TABLET.........................................................7 2.5 BATTERY CHARGING FOR TABLET...................................................7 2.6 MATCH CODE OF TABLET ................................................................7 CHAPTER 3 USAGE OF PEN..............................................................9 CHAPTER 4 INSTRUCTION FOR WINDOWS SYSTEMS............13 4.1 SYSTEM REQUIREMENTS ..............................................................13 4.2 INSTALLATION ................................................................................13 4.3 UNINSTALLING ...............................................................................14 4.4 CONFIGURATION............................................................................15 CHAPTER 5 INSTRUCTION FOR MAC SYSTEMS.......................25 5.1 SYSTEM REQUIREMENTS ..............................................................25 5.2 INSTALLATION ................................................................................25 5.3 UNINSTALLING ...............................................................................28 5.4 CONFIGURATION............................................................................29 CHAPTER 6 BUNDLED SOFTWARE...............................................35 6.1 HANVON SHELL .............................................................................35 6.2 PENWRITE.....................................................................................41 6.3 PENSIGN .......................................................................................48 6.4 PENMAIL........................................................................................49 6.5 PENMARK......................................................................................51 6.6 WHITEBOARD................................................................................53 CHAPTER 7 MAINTENANCE ............................................................57 7.1 PEN HOLDER.................................................................................57 7.2 EXCHANGE PEN NIB......................................................................58 7.3 CAUTIONS......................................................................................59 APPENDIX.............................................................................................61 WARRANTY ..........................................................................................61

This Users Manual does not contain detailed information of any software from third party.

Due to our continuous updates on the product, all figures in this manual are only for reference, the actual item is the standard. CHAPTER 1 GRAPHICS Tablet Introduction Chapter 1 Graphics Tablet Introduction 1.1 General Introduction The Hanvon Graphics Tablet allows user to create graphics on a computer using a cordless and battery-free pen. It is very easy to use. The user does not have to be an experienced graphic artist to use it. This USB graphics tablet supports a variety of professional painting and photo editing software including Painter, Photoshop, Ulead Photolmpact, Flash, Dabbler, Maya, PaintShop and more. 1.2 Features

Cordless and Battery-free pen

Pressure Sensitive Technology

Radio Frequency Technology

Equipped with Office Assistant Tools

Using standard USB without the need for an external power

Windows & Mac compatible

Software Supported: Painter

/ Ulead PhotoImpact / Flash / CorelDraw / Dabbler / Maya and a variety of graphic processing software.

/ Photoshop adapter 1 CHAPTER 2 Quick-Start Tutorial Chapter 2 Quick-Start Tutorial 2.1 Setup steps 1. Install the driver from product CD 2. Connect receiver to USB port on computer. 3. Choose working mode:

Wired mode: Connect the receiver to tablet.

Wireless mode: Disconnect the receiver from tablet. Note: Either wired or wireless mode requires the receiver connecting to USB port of computer. 2 CHAPTER 2 Quick-Start Tutorial 2.2 Illustration of Wireless Tablet 2.2.1 Front Side Power-on Indicator: To represent the state of graphics tablet.Data is transmitting between the tablet and the receiver when green light blinks. Charging Indicator: Red light represents charging the tablet. Full Power Indicator: Green light represents full battery power. The battery cannot be detected or malfunctioned when the Power-on Indicator and Charging Indicator are blinking;please check whether the battey is secured in the compartment and is 3 CHAPTER 2 Quick-Start Tutorial in good condition. The battery is fully charged when Charging Indicator and Full power Indicator are on at the same time. 2.2.2 Wired Mode Battery compartment: A compartment stores tablet battery. Channel switch button: To switch channel when multiple wireless tablets use the same channel and interfere each other. Press Channel switch button for once time, the channel can be switched from 0 to 15.Receiver Indicator blinks if the channel was switched successfully. 4 CHAPTER 2 Quick-Start Tutorial Wake up button: To wake up wireless tablet from sleep mode. USB Connection Interface: To connect the receiver to tablet. The interface is for charging battery and communication between the tablet and receiver at wired mode. Reset Key: To reset the tablet when sleep mode or crashing. Code Match Button: Press the code match button of tablet for 3 seconds and receiver indicator will blink, then match the code. Note: Code between tablet and its receiver has been matched during production. 2.2.3 Receiver Cable Connection Interface of Receiver: To connect the 5 CHAPTER 2 Quick-Start Tutorial receiver to tablet. Code Match Button of Receiver: Press to match code between receiver and tablet. Receiver Indicator: green between receiver and tablet. 2.2.4 Wireless Mode light blinks when transmitting 2.3 Wake up Tablet Tablet will be into sleep mode automatically when the tablet idled over about 10 minutes. Press wake up button, then users can use the tablet normally. 6 CHAPTER 2 Quick-Start Tutorial 2.4 Switch Channel of Tablet Disconnect receiver with tablet, the tablet will be on wireless mode. It will be disturbed when multiple tablets using the same channel, for example: multiple tablets being wireless mode, using wireless tablet with RF mouse or wireless telephone together in one room. Press Channel switch button once, receiver indicator will blink, and the channel will be switched. 2.5 Battery Charging for Tablet There is a BL-5C LI battery in the tablet. Please charge the battery when power is low. Charging: Connect receiver to tablet, then connect tablet to computer, 2.6 Match Code of Tablet It will be disturbed when multiple tablets using the same channel, then please try to rematch the code for tablet. Steps as follow:

1. Install the tablet driver for computer 2. Connect receiver with the computer, disconnect the receiver 7 CHAPTER 2 Quick-Start Tutorial with tablet, 3. Press code match button of receiver; when receiver indicator will blink, press code match button of tablet on the back case. 4. Match code successfully if using the pen tablet normally. Otherwise, please press match code of receiver again, then press match code of tablet. Operate as above until match code successfully. Note: Hanvon has already matched the code between tablet and receiver when finishing production, it is unnecessory to match the code at first time use. 8 CHAPTER 3 USAGE of Pen Chapter 3 Usage of Pen Holding the pen Hold the pen as usual.

The pen will take effect when it comes within 7mm above the tablet.

While using the pen, be sure that your thumb or index finger can easily control the button on the pen, which acts as the right-click key of a mouse. 9 CHAPTER 3 USAGE of Pen Positioning Moving the pen in the active area of the tablet will control the cursors position on the computer screen. The pen and tablet use the Absolute Coordination method. This means the active area of the tablet represents the entire computer screen. Moving the pen on the tablet creates a corresponding movement of the cursor on the screen. 10 CHAPTER 3 USAGE of Pen Single Click One slight touch of the pen on the tablet has the same effect as a single left-click of the mouse. Double Click Two immediate clicks on the tablet have the same effect as a double left-click of the mouse. the tablet the cursor is positioned, press Double Click Technology When twice immediately with the pen tip, making sure that you do not move the pen tip. The response for the double click can be slow for beginners. You can solve this problem by adjusting the double click speed from the normal setting of the tablet. Dragging Select a target by pressing the pen down on it, and do not 11 CHAPTER 3 USAGE of Pen release the pen till you have moved the target to the new position you want. Pressure Sensitive Painting In applicable software, you can use the pressure sensitivity of the pen to control the painting brushwork for different effects such as direction, stroke width, color and thickness. The software that supports pressure sensitivity includes Adobe Photoshop, Painter, Flash, Ulead PhotoImpact, Art Dabbler etc. 12 CHAPTER 4 INSTRUCTION FOR Windows Systems Chapter 4 Instruction for Windows Systems 4.1 System Requirements Pentium III 1GHz or later CPU RAM 256MB Hard-disk 200MB OS Port WINDOWS 2000/XP/Vista X86/Vista X64 USB1.1 or 2.0 4.2 Installation Connect the drawing tablets USB cable to the computers USB port. Step 1 Insert the driver CD into the CD-ROM drive. The Installation Menu should pop-up automatically. If the menu does not appear, double-click the My Computer icon on the Desktop, find the AutoRun.exe file under the CD-ROMs root directory, and 13 CHAPTER 4 INSTRUCTION FOR Windows Systems double-click it. Step 2 Click on Install Driver for Graphic Tablet button to install the driver and click on Install Hanvon Soft to install the bundled software. Step 3 After installing the driver and the bundled software, read this manual for detailed information on using and customizing your graphics tablet. Note: If the tablet cannot be used after driver installation, please restart your computer. 4.3 Uninstalling Step 1 Click the Windows Start button and then select Control panel. Step 2 Double click Add/remove program in the control panel window and find Tablet Driver. 14 CHAPTER 4 INSTRUCTION FOR Windows Systems Step 3 Click Uninstall and follow the prompts to remove the tablet driver. 4.4 Configuration Hanvon tablet driver provides a configuration window to set pen pressure, working area, dual-monitors, double-click speed, express touch keys, etc. Before Configuration

Connect the graphics tablet to the USB port on your computer.

Go to control panel. 15 CHAPTER 4 INSTRUCTION FOR Windows Systems

Double-click the HW Tablet icon to open the configuration interface. 16 CHAPTER 4 INSTRUCTION FOR Windows 4.4.1 General Configuration Systems a. Adjusting Pressure Sensitivity Pen pressure sensitivity can be adjusted by dragging the slider between soft and hard. To create broad strokes, use a soft tip. To draw thin lines, use a hard tip. The factory setting can be restored by clicking the Default button. Adjustments can be saved by clicking the Save button or can be canceled by clicking the Cancel button. b. Pressure Curve Graph Pen pressure sensitivity changes are displayed on the Pressure Curve Graph. The images below show the graphs for light and heavy pen pressure respectively. 17 CHAPTER 4 INSTRUCTION FOR Windows Systems c. Pressure Testing Area The right area is the pressure test area which is use to test the pen tip feel. The round circle at the upper left corner represents the tile angle between the drawing pen and the tablet surface. All the writing and drawing in the test area can be cleared by clicking the Clear button. 18 CHAPTER 4 INSTRUCTION FOR Windows Systems Note: Only Windows 2000/XP/Vista X86/Vista X64 support tilt angle. d. Double-Click Speed Dragging the slider to adjust the double-click speed and then you can test the double click speed on the folder icon. e. Other settings

When you select the option to display the icon on taskbar, the user can configure the tablet by right-clicking on the icon. Uncheck option not to show HW Tablet icon on the taskbar.

Check the option Disable right key, the pen button acting as right-click of mouse button will not be functional. 19 CHAPTER 4 INSTRUCTION FOR Windows Systems 4.4.2 Mapping a. Single Monitor Mode The entire active area of the tablet maps to the entire monitor by default. If your computer has more than one monitor, see Multi-Monitor Mode. b. Multi-Monitor Mode a) Full Screen Choose Select Monitor and then select Full Display from the drop-down menu. You will see the screen area corresponding to the active area of the tablet is mapped. 20 CHAPTER 4 INSTRUCTION FOR Windows Systems b) Screen #1 Choose Select Monitor and select Display 1 from the drop-down menu to set the area only Display 1can be controlled by the tablet. 21 CHAPTER 4 INSTRUCTION FOR Windows Systems c) Screen #2 Choose Select Monitor and select Display 2 from the drop-down menu to set the area only Display 2 can be controlled by the tablet. 22 CHAPTER 4 INSTRUCTION FOR Windows Systems c. Portion of Screen Choose Part of Monitor, and then click the upper left corner and lower right corner for the expected area of screen which will be mapped to the full tablet. d. Portion of Tablet Manual Setting enables you to select part of the active area of the tablet mapped to the full screen. 23 CHAPTER 4 INSTRUCTION FOR Windows Systems e. Auto Setting The tablet active area can be automatically set by clicking the Auto Setting button. The active area can be set when the user have single monitor, multi-monitor or wide screen monitor (16:9). 4.4.3 Key setting You will see the information as following figure shown because the tablet you purchased does not support the express touch keys. 24 CHAPTER 5 INSTRUCTION FOR Mac Systems Chapter 5 Instruction for Mac Systems 5.1 System Requirements RAM Minimum is 128MB (256MB is recommended) Hard-disk 200MB OS Port MAC-OS 10.4 or later USB1.1or 2.0 5.2 Installation Connect the graphic tablets USB cable to the computers USB port. Step 1 Insert the driver CD into the CD-ROM drive then find the install file in MacOS X/Mac104/Install.dmg (Note:For MacOS 10.4 or later) or MacOS X/Mac103/Hwinstall.dmg (Note: For MacOS 10.3.X and it does not support express touch keys of graphics tablet), click on the Install.dmg or Hwinstall.dmg icon to run the file. 25 CHAPTER 5 INSTRUCTION FOR Mac Systems the removing Note: If you installed driver for Mac OS 10.3.X, you need to uninstall it before driver installation for Mac OS 10.4.X or later. For open

"System-Library-Extensions" and delete "HYTabletDriver.kext"

file. Step 2 Double-click the Install icon. please driver, Step 3 Please read the license agreement carefully then click Next. 26 CHAPTER 5 INSTRUCTION FOR Mac Systems Step 4 Click Install to install the tablet driver. Step 5 Click OK and reboot your computer when the install process is finished. 27 CHAPTER 5 INSTRUCTION FOR Mac Systems 5.3 Uninstalling Open HWTablet in Applications. Choose Uninstall to remove the tablet driver. Please click OK when the driver has been removed.Suggestion: Reboot the computer. 28 CHAPTER 5 INSTRUCTION FOR Mac Systems 5.4 Configuration Connect the tablet to your computer by USB cable and port. The HWTblt Double-click the HWTblt icon to open the tablet control panel. icon has been added the applications. in 5.4.1 General Configuration 29 CHAPTER 5 INSTRUCTION FOR Mac Systems a. Adjusting Pressure Sensitivity Pen pressure sensitivity can be adjusted by dragging the slider between soft and hard. The right area is the pressure test area. Adjustment can be saved by clicking the Save button, or can be canceled by clicking the Cancel button. b. Pressure Curve Graph Pen pressure sensitivity changes are displayed on the Pressure curve graph. The images below show the graphs for light and heavy pen pressure respectively. 30 CHAPTER 5 INSTRUCTION FOR Mac Systems c. Pressure Test Area All the writing and drawing in the test area can be cleared by clicking Clear button. 31 CHAPTER 5 INSTRUCTION FOR Mac Systems 5.4.2 Mapping a. Multi-Monitor Mode You can drag the displays to the desired order if you computer has more than one monitor. a) Full screen Choose Region and select Total Displays from the drop-down the active area of menu. You will see the monitors corresponding to the area in table is mapped. 32 CHAPTER 5 INSTRUCTION FOR Mac Systems b) Display #0 Select Display 0 from the drop-down menu to set the area in tablet to control Display 0. c) Display #1 Select Display 1 from the drop-down menu to set the area in tablet to control Display 1. 33 CHAPTER 5 INSTRUCTION FOR Mac Systems 5.4.3 Key set You will see the information as following figure shown because the tablet you purchased does not support the express touch keys. 34 CHAPTER 6 Bundled Software Chapter 6 Bundled Software 6.1 Hanvon Shell 6.1.1 Shell Summary Hanvon Shell is a shortcut startup application for starting bundled Hanvon Software or other software. Default startup style: it will be operated automatically when you startup your computer; if user exits shell from the application, it will switch to the manual startup style; double click the shortcut icon on the desktop Main interface will be shown as following:

to startup the Shell toolbar. Icons explanations as following:

1. Area for Dragging Shell After opening shell toolbar, you can drag the icon to adjust the 35 CHAPTER 6 Bundled Software positions at up, down, left and right locations on computers screen;

When cursor have been left the toolbar for 5 seconds or later, Shell toolbar will be hided, Single-click it to display the main interface;

2. PenWrite Editing Microsoft Office documents formatted as: WordTxt Excel and PPT by handwriting directly;

PenWrite Provides EnglishGermanFrenchItalianDutch SpanishSwedishPortuguese (Portugal)Portuguese (Brazil) multi-languages recognition 3. PenWrite Asia Editing Microsoft Office documents formatted as: wordTxt Excel and PPT by handwriting directly;

PenWrite Asia Provides Simplified Chinese Traditional Chinese (Hong Kong) Traditional Chinese (Taiwan) Japanese and Korean languages recognition 4. PenSign This program enables you to add your handwriting signature in a document such as Microsoft Office word /PPT;

36 CHAPTER 6 Bundled Software 5. PenMail Providing handwrite email in Outlook Express or Windows Mail. 6. PenMark Providing handwrite mark on desktop or pictures;

7. WhiteBoard A software application simulates Electronic Whiteboard. The monitor is like a marker board in front of users and become a simplified Electronic Whiteboard through a projector. 8. System Menu Configure shell setting 9. Tablet Setting Configure tablet setting 37 CHAPTER 6 Bundled Software 6.1.2 System Menu Shell Click to enter Shell configuration interface shown as following figure:

Position: Set the position for Hanvon Shell on the screen;

Icon Size: Set the icon size shown in the Hanvon startup toolbar;

Transparency: Set the transparency for Hanvon startup toolbar. 38 CHAPTER 6 Bundled Software 6.1.3 Tablet Setting Click to enter tablet setting interface shown as following figure:

39 CHAPTER 6 Bundled Software 6.1.4 Shell right key menu Delete: Delete the current icon or separator Options: Change name and icon of the current software Location: Find the target file position which the software is saved Add Separator: Add the separator in the location where the cursor is placed. Setting: the function is the same as System Menu Next Page: Turn to next page 40 CHAPTER 6 Bundled Software 6.2 PenWrite on the shell to open PenWrite application. Click for editing, Then users may Open WORD application handwriting input words ,sentences, punctuation&symbol and numbers in English German French Italian Dutch Spanish Swedish Portuguese (Portugal) Portuguese

(Brazil).The handwriting characters would be turn to be text automatically to the location where the cursor was placed. on the shell to open PenWrite Asia application. Click Open WORD application for editing, Then users may handwriting input characterspunctuation&symbol and numbers in Simplified Chinese Traditional Chinese (Hong Kong) Traditional Chinese(Taiwan) Japanese and Korean. Note: Please confirm the cursors location firstly, and then start handwriting. PenWrite and PenWrite Asia have the same main interface. Instruction as following:

41 CHAPTER 6 Bundled Software Icon explanations:

Basic functions 1. Pen & Mouse Mode Switch the status between Pen & Mouse Mode

Pen Mode

\ Mouse Mode 2. Comma & Period Edit, or . by clicking Comma or Period 3. Backspace Backspace by clicking 4. Enter Enter by clicking 5. Keyboard 42 CHAPTER 6 Bundled Software Click to startup software keyboard 6. System Menu Click figure:

to enter an interface shown as following 7. Exit to exit Click the candidate area for recognized results 8. Setting Click setting shown as following figure:

Setting for PenWriteRecognition 43 CHAPTER 6 Bundled Software

[Select Language] Choose recognition language between 9 kinds of languages

[Recognition Range] Choose the recognition range

[Recognition Delay] Adjust the recognition interval time. 44 CHAPTER 6 Bundled Software

Setting for PenWrite AsiaRecognition

[Select Language] Choose recognition language between Simplified ChineseTraditional Chinese (Hong Kong) Traditional Chinese (Taiwan) Japanese and Korean. [Recognition Range] Choose the recognition range

[Recognition Delay] Adjust the recognition interval time. 45 CHAPTER 6 Bundled Software

SettingPen Selecting the pen type, line colors or line thickness 46 CHAPTER 6 Bundled Software

Gesture:

SpaceBackspaceEnterTab

Edit Command:

=Ctrl For example:

Ctrl+A Ctrl+X Edit Command supported as bellow:

Ctrl + A Ctrl +C Ctrl +V Ctrl +X Ctrl +Z 47 CHAPTER 6 Bundled Software 6.3 PenSign Click to open PenSign application

The program can be used in Microsoft Office 2000 and the version higher, WordExcelPowerPoint ( Notice: please dont write directly in Word outline\Excel pagination preview\

PowerPoint insert images )

Support the Word Pad and Windows Draw (when the script will be shown opacity, it wouldnt support Hide Sign & Show Sign and Delete Sign functions.

The signature size and position can be adjusted freely. Icon explanations:

1. Start Sign & End Sign;

Start and end to sign;

2. Pen(Brush \ pencil \ Ink Pen) Select pen type 3. Color Select line color 4. Width 48 CHAPTER 6 Bundled Software Select line thickness 5. Clear all Clear current script 6. Hide Sign & Show Sign Show or hide your signature 7. Delete Sign Delete all script 8. System Menu Help & About 9. Exit 6.4 PenMail Click to open PenMail application. Icon explanations:

49 CHAPTER 6 Bundled Software 1. PenMail When pressing icon handwriting status; and it will return to text editor status down, it will switch to when lifting icon

. 2. Pen(Brush \ pencil \ Ink Pen) Select pen type 3. Eraser Erase the individual script 4. Selector Select part script 5. Clear Clear all script 6. Colors Select line color 7. Width Select line thickness The program can be used in Outlook Express 6.0 and the version higher in Windows 2000/XP OS, and Windows Mail in Windows Vista OS. When the system operating is Windows 2000, please install IE6 and Outlook Express 6 or higher version before applying PenMail. PenMail can also support Vista x32 but not Vista x64;

50 CHAPTER 6 Bundled Software 6.5 PenMark Click to open PenMark application; you can handwrite marks on the screen or pictures. Icon explanations:

1. Start\exit screen annotation 2. Open picture 3. Save

Files can be saved as BMPJPGTIFPNG or GIF format

Suggest you to select TIF format when the file has several pages.

Default saving path: C:\Documents and Settings\Administrator\My Documents\My Pictures. 4. Pen(Brush \ pencil \ Ink Pen\ High Lighter) Select Pen type 5. Color Select line color 6. Width Select line thickness 51 CHAPTER 6 Bundled Software 7. Eraser Clear part script 8. Clear all Clear all script 9. Tools Insert line\figure\text\pictures 10. System Menu SettingHelpAbout 11. Exit SettingEraser Setting the size of eraser 52 CHAPTER 6 Bundled Software 6.6 WhiteBoard Click to open WhiteBoard application. Icon explanations:

1. Save

The document can be saved as BMPJPGTIFPNG or GIF format

Suggest you to select TIF format when the document has multiple pages.

Default saving path: C:\Documents and Settings\Administrator\My Documents\My Pictures. 2. New Page Add a new page 3. Pen (Brush \ pencil \ Ink Pen\ High Lighter) Select pen type 4. Color Select line color 5. Width Select line thickness 6. Eraser 53 CHAPTER 6 Bundled Software Clear part script 7. Clear all Clear all script 8. Tools Insert Line\figure\text\pictures 9. Magnifier

Click the right key, the menu will popup, you can set spotlight size, shape, radio, high quality display, show border and exit

Exit the application directly by pressing ESC 10. Spotlight

Click down arrow, the menu will popup, you can set spotlight transparency, shape and exit.

Exit the application directly by pressing ESC 11. System Menu SettingHelpAbout 12. Previous Turn to previous page 54 CHAPTER 6 Bundled Software 13. Next Turn to next page 14. Exit Setting

Setting--Magnifier Setting magnifier size, shape, ratio, high quality display and show border

SettingSpotlight 55 CHAPTER 6 Bundled Software Setting spotlight transparency and shape

SettingEraser Setting the size of eraser 56 MAINTENANCE Chapter 7 Maintenance 7.1 Pen Holder Front View of Pen Holder Back View of Pen Holder a. Vertical Pen Slot a. Pen Nib Storage the switch Slide toward green dot to open, then pick from Pen Nib pen nibs Storage; slide the switch toward red dot to close the Pen Nib Storage b. Horizontal Pen Slot b. Storage hole for extra pen c. Pen Nib Exchanger nibs Front view with pen placed in horizontal slot 57 MAINTENANCE 7.2 Exchange Pen Nib

Insert the old nib to Pen Nib Exchanger, hold tight and pull the pen out of the pen nib exchanger.

Pulling out the pen nib After pulling the pen out of the exchanger, the old pen nib stayed in Pen Nib Exchanger. Insert a new pen nib into the pen.

58 MAINTENANCE Note: The pen holder is not included in all series of products. If you purchased the product does not have the pen holder as mentioned above, please using tweezers, grasp the nib and draw it out. Once removed, a new nib may be inserted into the pen. 7.3 Cautions

Do not put the tablet on a metal surface, such as iron or aluminum alloys.

Due to a CRT monitors electromagnetic radiation, do not use the drawing tablet too close to a CRT monitor.

Please do not stack tablets while battery has been installed in compartment; otherwise, the tablet cannot enter sleep mode, and battery power will be consumed very fast. Taking out battery is recommended in this case. tested and complies with

For receivers and Class B digital This product has been the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television is no guarantee interference in a there 59 MAINTENANCE reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment or devices Connect the equipment to an outlet other than the receiver's Consult a dealer or an experienced radio/TV technician for assistance

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 60 APPENDIX Appendix Warranty Limited Warranty Hanwang Technology warrants that this product is free from any defects in workmanship or materials under normal use and conditions for a period of two (2) years for Europe or one (1) year for the U.S. from the date of original purchase. If such a defect is discovered within this warrants limitations, Hanvon agrees, at its sole discretion, to repair or replace the same item with one of equal value, free of charge to the original consumer purchaser. This warranty shall not apply if this product is modified, misused, tampered with, subject to abnormal working conditions, or transferred to someone other than the original consumer purchaser. Warranty Redemption for US Market Only Should this product fail to function in a satisfactory manner, please return it to the store where it was originally purchased. Please be sure to contact us at service@hanvon.com to obtain a Return Merchandise Authorization Number before you return it, and within your email please include your name, address, phone number, a copy of the original receipt, serial number and the reasons for returning the product. 61 APPENDIX Should this fail to resolve the matter and service is still required by reason of any defect or malfunction during the warranty period, Hanvon Corporation will repair or replace this product without charge (except for a charge for handling, packing, return UPS/postage, and insurance). Technical Support Should you have any questions or comments, please contact us via tech@hanvon.com, or visit our website at:

Global site: http://www.hanvon.com US site: http://usa.hanvon.com Online Registration for US Market Only To better serve our customers, please take the time to register online at http://usa.hanvon.com. This information is for internal use only. No information provided will be distributed to soliciting organizations. The registration also allows you to receive valuable information and enjoy special savings on upgrades for products. Thank you for choosing Hanvon products. 62