submitted | available | document details (if available) | source link |
---|---|---|---|
March 01 2019 | Multi Printing... jgon84 GPL Ghostscript 9.10 |
various | Installation Manual | Users Manual | 1.74 MiB | March 01 2019 |
Vehicle/engine type: L, P, G, R, S series truck (2016- ) Multi Client User 16-15 E130, infotainment system Removal - E130, AUS4 Tools Number Designation Illustration Tool board 588 390 Plastic removal tools, 5 parts N/A 1. Lower the steering wheel. 2. Remove the frame around the instrument cluster. The frame is attached with panel studs. 3. For vehicles equipped with an interlock valve:
Remove the interlock valve casing. 2018-09-18 Scania CV 1 of 9 Vehicle/engine type: L, P, G, R, S series truck (2016- ) Multi Client User 4. On vehicles equipped with an additional instrument panel module, you must first remove the casing for this additional instrument panel module:
Remove the screw. The casing for the additional instrument panel module is secured with a latch hook at the bottom edge. Remove the additional instrument panel module casing. Use 588 390 Plastic removal tools, 5 parts. 5. Remove the panel. 6. Remove the screw. 7. Remove the upper switch panel. Detach from right to left. 2018-09-18 Scania CV 2 of 9 Vehicle/engine type: L, P, G, R, S series truck (2016- ) Multi Client User 8. Remove the casing around the parking brake valve lever. 9. Remove the lower switch panel and fold down the panel without undoing the harness-to-
component connectors. 10. Remove the screws. 11. Move the infotainment system straight out and disconnect the connector and the antenna. Fitting - E130, AUS4 1. Fit the connector and the antenna to the infotainment system, and push the infotainment system into place. 2. Fit the screws. 2018-09-18 Scania CV 3 of 9 Vehicle/engine type: L, P, G, R, S series truck (2016- ) Multi Client User 3. Fit the lower switch panel and the casing around the parking brake valve lever. 4. Fit the upper switch panel. 5. Fit the screw. 6. Fit the panel. 2018-09-18 Scania CV 4 of 9 Vehicle/engine type: L, P, G, R, S series truck (2016- ) Multi Client User 7. For vehicles equipped with an interlock valve:
Fit the clamp in the interlock valve casing. Fit the casing. 8. Fit the frame around the instrument cluster. 9. Fold back the steering wheel. 10. Carry out spare parts programming of the control unit using SDP3. Removal - E130, AUS4 Tools Number Designation Illustration Tool board 588 390 Plastic removal tools, 5 parts N/A 2018-09-18 Scania CV 5 of 9 Vehicle/engine type: L, P, G, R, S series truck (2016- ) Multi Client User 1. Lower the steering wheel. 2. Remove the frame around the instrument cluster. The frame is attached with panel studs. 3. On vehicles equipped with an additional instrument panel module, you must first remove the casing for this additional instrument panel module:
Remove the screw. The casing for the additional instrument panel module is secured with a latch hook at the bottom edge. Remove the additional instrument panel module casing. Use 588 390 Plastic removal tools, 5 parts. 4. Remove the panel. 2018-09-18 Scania CV 6 of 9 Vehicle/engine type: L, P, G, R, S series truck (2016- ) Multi Client User 5. Remove the screw. 6. Remove the upper switch panel. Detach from right to left. 7. Remove the lower switch panel and fold down the panel without undoing the harness-to-
component connectors. 8. Remove the screws. 9. Move the infotainment system straight out and disconnect the connector and the antenna. 2018-09-18 Scania CV 7 of 9 Vehicle/engine type: L, P, G, R, S series truck (2016- ) Multi Client User Fitting - E130, AUS4 1. Fit the connector and the antenna to the infotainment system, and push the infotainment system into place. 2. Fit the screws. 3. Fit the lower switch panel. 4. Fit the upper switch panel. 5. Fit the screw. 2018-09-18 Scania CV 8 of 9 Vehicle/engine type: L, P, G, R, S series truck (2016- ) Multi Client User 6. Fit the panel. 7. Fit the frame around the instrument cluster. 8. Fold back the steering wheel. 9. Carry out spare parts programming of the control unit using SDP3. 2018-09-18 Scania CV 9 of 9
This product uses the FCC Data API but is not endorsed or certified by the FCC