| all | frequencies |
|
exhibits | applications |
|---|---|---|---|---|
| manual |
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 2 |
|
user manual | Users Manual | 3.41 MiB | November 07 2013 | |||
| 1 2 | Cover Letter(s) | November 07 2013 | ||||||
| 1 2 | RF Exposure Info | November 07 2013 | ||||||
| 1 2 | Cover Letter(s) | November 07 2013 | ||||||
| 1 2 | Test Report | November 07 2013 | ||||||
| 1 2 | External Photos | November 07 2013 | ||||||
| 1 2 | Internal Photos | November 07 2013 | ||||||
| 1 2 | ID Label/Location Info | November 07 2013 | ||||||
| 1 2 | Cover Letter(s) | November 07 2013 | ||||||
| 1 2 | Test Report | November 07 2013 | ||||||
| 1 2 | Test Setup Photos | November 07 2013 |
| 1 2 | user manual | Users Manual | 3.41 MiB | November 07 2013 |
Hi-Gain Outdoor Dual Band Wireless N Access Point/Bridge HOD45B website www.hawkingtech.com e-mail techsupport@hawkingtech.com COPYRIGHT 2013 HAWKING TECHNOLOGIES,INC. ALL RIGHTS RESERVED. USERS MANUAL USERS MANUAL COPYRIGHT Copyright 2013 by Hawking Technologies, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company LIMITED WARRANTY Hawking Technology guarantees that every HOD45B Hi-Gain Outdoor Dual Band Wireless N Access Point/Bridge is free from physical defects in material and workmanship under normal use for one (1) year from the date of purchase. If the product proves defective during this one-year warranty period, call Hawking Customer Service in order to obtain a Return Authorization number. Warranty is for repair or replacement only. Hawking Technology does not issue any refunds. BE SURE TO HAVE YOUR PROOF OF PURCHASE. RETURN REQUESTS CAN NOT BE PROCESSED WITHOUT PROOF OF PURCHASE. When returning a product, mark the Return Authorization number clearly on the outside of the package and include your original proof of purchase. IN NO EVENT SHALL HAWKING TECHNOLOGYS LIABILTY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE OR ITS DOCUMENTATION. Hawking Technology makes no warranty or representation, expressed, implied or statutory, with respect to its products or the contents or use of this documentation and all accompanying software, and specifically disclaims its quality, performance, merchantability, or fitness for any particular purpose. Hawking Technology reserves the right to revise or updates its products, software, or documentation without obligation to notify any individual or entity. Please direct all inquiries to:
techsupport@hawkingtech.com 1 Federal Communication Commission Interference Statement FCC Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio technician for help. FCC Caution This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm spacing must be provided between computer mounted antenna and persons body (excluding extremities of hands, wrist and feet) during wireless modes of operation. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2 Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. R&TTE Compliance Statement This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE). The R&TTE Directive repeals and replaces in the directive 98/13/EEC
(Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000. Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment. 3 EU Countries Intended for Use The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain, Sweden, and the United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states:
Iceland, Liechtenstein, Norway, and Switzerland. EU Countries NOT intended for use None. 4 Table of Contents Chapter I: Product Information ........................................................................................... 7 1-1 Introduction and Safety Information ........................................................................ 7 1-2 Safety Information .................................................................................................... 8 1-3 System Requirements ............................................................................................... 9 1-4 Package Contents .................................................................................................... 10 1-5 Product Overview ....................................................................................................11 Chapter II: System and Network Setup ............................................................................ 13 2-1 Build Network Connection ..................................................................................... 13 2-2 Definitions of Dual Band and HOD45B Supported Modes ................................... 14 2-3 Connecting to the HOD45B via Web Browser ....................................................... 18 2-3-1 Windows 95/98/Me IP address setup .............................................................. 19 2-3-2 Windows 2000 IP address setup ...................................................................... 20 2-3-3 Windows XP IP address setup ......................................................................... 23 2-3-4 Windows Vista/7 IP address setup ................................................................... 25 2-3-5 Mac OS X IP Address Setup ........................................................................... 27 2-3-6 Tablet/Smartphone Setup ................................................................................ 28 2-3-7 Accessing the Web Page User Interface .......................................................... 30 2-4 Quick Setup .......................................................................................................... 33 2-4-1 Setup Procedure for Access Point ................................................................ 35 2-4-2 Setup Procedure Station-Infrastructure (Wireless Bridge) ........................... 38 2-4-3 Setup procedure for AP Bridge-Point to Point: ............................................ 40 2-4-4 Setup procedure for AP Bridge-Point to Multi-Point ................................... 43 2-4-5 Setup Procedure for AP-Bridge WDS .......................................................... 46 2-4-6 Setup Procedure for Universal Repeater ...................................................... 49 Chapter III General Setup ................................................................................................. 52 3-1 Time zone and time auto-synchronization .............................................................. 53 3-2 Change Management password .............................................................................. 55 3-3 Wired LAN Configuration ...................................................................................... 58 3-3-1 Local Network ................................................................................................. 59 3-3-2 DHCP Server: .................................................................................................. 60 3-3-3 Static DHCP Leases Table:.............................................................................. 61 3-4 Wireless Network ................................................................................................... 63 3-4-1 Basic Wireless Settings ................................................................................... 64 5 3-4-2 Advanced Wireless Settings ............................................................................ 75 3-4-3 Security Settings .............................................................................................. 78 3-4-4 Wireless Access Control .................................................................................. 85 3-4-5 Wi-Fi Protected Setup (WPS) ......................................................................... 88 3-4-6 Security Tips for Wireless Network ................................................................ 91 Chapter IV Status and Tools ............................................................................................. 92 4-1 System Status .......................................................................................................... 92 4-1-1 System information and firmware version ...................................................... 92 4-1-2 Local Network ................................................................................................. 93 4-1-3 Active DHCP client list ................................................................................... 94 4-1-4 Statistics .......................................................................................................... 95 4-2 Configuration Tools ................................................................................................ 96 4-3 Firmware Upgrade .................................................................................................. 98 4-4 System Reset......................................................................................................... 100 Chapter V: Software ........................................................................................................ 101 5-1 Setting up via Software Option ............................................................................ 101 5-2 Other Settings on the Software Interface .............................................................. 106 5-2-1 Firmware Upgrade......................................................................................... 106 5-2-2 Password Settings .......................................................................................... 106 5-2-3 Reset Settings ................................................................................................ 107 Chapter VI: Appendix ..................................................................................................... 108 6-1 Hardware Specification ........................................................................................ 108 6-2 Troubleshooting .................................................................................................... 108 6-3 Glossary ................................................................................................................. 111 6 Chapter I: Product Information 1-1 Introduction and Safety Information Thank you for purchasing the HOD45B Hi-Gain Outdoor Dual Band Wireless N Access Point/Bridge. This highly efficient access point is the best choice for Small office / Home office users. It allows computers and network devices to gain wireless access in several modes throughout their network. Easy install procedures allow any computer user to setup a network environment in a very short time. With built-in dual band 2.4GHz and 5GHz radios, this router supports the IEEE 802.11b/g/n and IEEE 802.11a/n wireless network standards simultaneously. All computers and wireless-enabled network devices (including PDA, cellular phone, game console, etc.) can connect to this wireless router without additional cabling. 802.11N wireless capability also gives you the highest wireless speeds. With a compatible wireless card installed in your PC, you can transfer files at up to 600Mbps (combined 2.4GHz and 5GHz transfer data rate)!
Other features of the HOD45B include:
Supports 2.4GHz and 5GHz wireless devices simultaneously. Provides IEEE 802.11b/g/Draft-N wireless LAN capability 6 different Wireless Modes: Access Point, Bridge Client, Bridge Point to Point, Bridge Point to Multi-Point, AP Bridge WDS modes, Universal Repeater Supports 64/128-bit WEP, WPA, and WPA2 wireless data encryption. Supports MAC address filtering (Only allow specific wireless device of your choice to connect to this access point). One wired LAN port (10/100M) Auto MDI / MDI-X function for all wired Ethernet ports. Provides IEEE 802.11a/b/g/n wireless LAN capability. Support DHCP (Server/Client) for easy IP-address setup. Allows you to monitor the access points status: DHCP Client Log, System Log, Security Log and Device/Connection Status. Easy to use Web-based GUI for network configuration and management purposes. 7 1-2 Safety Information In order to keep the safety of users and property, please follow these safety instructions:
1. This access point is designed for outdoor use and is weather resistant. 2. DO NOT put this access point at or near hot or humid places, like kitchens or bathrooms. Also, do not leave this access point in the car in summer. 3. DO NOT pull any connected cable with force; disconnect them from the access point first. 4. If you want to place this access point in a high place or hang on the wall, please make sure the access point is firmly secured. Falling can damage the access point and its accessories and the warranty will be void. 5. Accessories of this access point, like antennas and power supply, are a danger to small children under 3 years old. KEEP THIS ACCESS POINT OUT OF THE REACH OF CHILDREN!
6. The access point will become warm when used for a long period of time (This is normal and is not a malfunction). DO NOT put this access point on paper, cloth, or other flammable materials. 7. There are no user-serviceable parts inside the access point. If you have found that the access point is not working properly, please contact technical support or your place of purchase and ask for help. DO NOT disassemble the access point, or warranty will be void. 8. If the access point falls into water when its powered on, DO NOT use your hands to pick it up. Switch the electrical power off before you do anything, or contact an experienced technician for help. 9. If you smell something strange, or see smoke coming out from the access point or power supply, remove the power supply or switch the electrical power off immediately, 8 and call techsupport or your place of purchase for help. 1-3 System Requirements One computer (Mac or PC). Internet Web Browser (Internet Explorer, Safari, etc.) A Wired or Wireless network adapter (e.g. Airport card, built-in Ethernet adapter, etc.) 9 1-4 Package Contents Before you start to use this access point, please check if theres anything missing in the package, and contact your place of purchase or contact Hawking Technologies. 1x HOD45B Hi Gain Outdoor Dual-Band Wireless-N Access Point/Bridge 2x 5dBi Hi-Gain Dual-Band Dipole Antennas 1x L-Shaped Antenna Connectors 1x Power Over Ethernet (PoE) Adapter 1x Power Cable and Power Transformer 1x Waterproof Gasket 1x Three foot Ethernet Cable 1x Setup CD-ROM 1x Quick Installation Guide (QIG) 10 1-5 Product Overview Back Panel 1 1 3 2 2 Item Name Description Mounting Points Mounting points for wall/pole bracket
(1) Antennas (2) 5dBi antennas Network/Power Connects to PoE adapter and for LAN connections.
(3) 11 Bottom Panel 2 1 3 1 Item Name Description Antenna Jacks Two antenna connectors for the 5dBi detachable antennas
(1) enclosed with the product. Reset (2) Reset the router to factory default settings (clear all settings). Remove cover screw and using a long, thin pointy object, press and hold for 15 seconds to restore all settings to factory defaults, power off/on. Network/Power Connects to PoE adapter and for LAN connections.
(3) NOTE: For 2.4GHz 802.11b and 802.11g mode, the signals can be transmitted only by antenna 1 (The antenna on the right side of the rear panel). For 2.4 GHz 802.11n mode: The router is operating in a 2T2R Spatial Multiplexing MIMO configuration. Two (2) antennas are for signal transmitting and two (2) antennas are for signal receiving. For 5GHz 802.11a/n mode: The router is operating in 3T3R Spatial Multiplexing MIMO configuration. Two (2) antennas are for signal transmitting and two (2) antennas are for signal receiving) 12 Chapter II: System and Network Setup 2-1 Build Network Connection Please follow the following instructions to build the network connection between your new HOD45B access point and your computers and other network devices:
1. Connect the A/C power adapter to the wall socket, and then connect it to the Power socket of the PoE injector. Connect a Ethernet cable from the Power + Data Out port on the PoE injector into the HOD45B 2. Connect your HOD45B from the LAN on the PoE injector to your computer/network or connect wirelessly to it. 3. Connect all your computers and network devices (network-enabled consumer devices other than computers, like game console, or switch / hub) to the network. 4. Log into the setup page to configure the HOD45B. 13 2-2 Definitions of Dual Band and HOD45B Supported Modes 2.4GHz vs 5GHz The HOD45B supports 2.4GHz and 5GHz bands. 2.4GHz is the most commonly used wireless bandwidth. It also has a very narrow range of channels, usually between 1-11. Common household devices such as microwaves and cordless phones also use the 2.4GHz bandwidth, and can cause interference with your wireless network. As a result of its heavy usage and narrow range of channels, the speed and range of typical WiFi devices can be negatively affected. 5GHz solves this problem by providing a faster, less congested, bandwidth with a wider range of available channels. Modes The HOD45B supports 6 different modes. Access Point: Standard default mode. The HOD45B will broadcast a WiFi signal for other computers and devices to connect to. Must be plugged into the router or network after setup. Station Infrastructure (Bridge): The HOD45B will allow you connect wired devices 14 wirelessly to an existing wireless router or access point. It will bridge these devices wirelessly with your network. It will not broadcast any WiFi signal. It will only make a wireless connection between the Access Point and the HOD45B. The HOD45B will only connect to either 2.4GHz or a 5GHz network. It will not connect to both at the same time. AP Bridge Point to Point: Similar to station-infrastructure, this requires two HOD45Bs on each end. This will create a wireless bridge between these two points. No WiFi signal will be broadcast and it will only make a wireless connection between those two points. 15 AP Bridge Point to Multi-Point: Similar to AP Bridge Point to Point, this allows you to connect several HOD45Bs to one point. No WiFi signal will be broadcast and it will only make a wireless connection between the HOD45Bs. AP Bridge WDS: Wireless Distributing System. This allows you to create a wireless network using up to four HOD45Bs using the same SSID (wireless name). It will broadcast a WiFi signal. 16 Universal Repeater: In this mode, the HOD45B will repeat the wireless signal of any existing wireless router/access point. It will act as a wireless relay and create a larger and seamless network for your wireless devices to connect to. 17 2-3 Connecting to the HOD45B via Web Browser After the network connection is built, the next step you should do is setup the access point with proper network parameters, so it can work properly in your network environment. Before you can connect to the access point and start configuration procedures, your computer must be set to static IP. Please follow the following instructions to configure your computer to use a static IP address:
If the operating system of your computer is. Windows 95/98/Me Windows 2000 Windows XP Windows Vista/7 Mac OS Tablet/Smartphone
- please go to section 2-3-1
- please go to section 2-3-2
- please go to section 2-3-3
- please go to section 2-3-4
- please go to section 2-3-5
- please go to section 2-3-6 18 2-3-1 Windows 95/98/Me IP address setup 1. Click Start button (it should be located at lower-left corner of your computer), then click control panel. Double-click Network icon, and Network window will appear. Select TCP/IP, then click Properties. 2. Select Obtain an IP address from a DHCP server and then click OK. 19 2-3-2 Windows 2000 IP address setup 1. Click Start button (it should be located at lower-left corner of your computer), then click control panel. Double-click Network and Dial-up Connections icon; click Local Area Connection, and Local Area Connection Properties window will appear. Select Internet Protocol (TCP/IP) and then click Properties 20 2. Select Obtain an IP address automatically and Obtain DNS server address automatically, then click OK. 21 22 2-3-3 Windows XP IP address setup 1. Click Start button (it should be located at lower-left corner of your computer), then click control panel. Double-click Network and Internet Connections icon, click Network Connections, and then double-click Local Area Connection, Local Area Connection Status window will appear, and then click Properties 23 2. Select Obtain an IP address automatically and Obtain DNS server address automatically, then click OK. 24 2-3-4 Windows Vista/7 IP address setup 1. Click Start button (it should be located at lower-left corner of your computer), then click control panel. Click View Network Status and Tasks, and then click Manage Network Connections. Right-click Local Area Network, then select Properties. Local Area Connection Properties window will appear, select Internet Protocol Version 4
(TCP / IPv4), and then click Properties 25 2. Select Obtain an IP address automatically and Obtain DNS server address automatically, then click OK. 26 2-3-5 Mac OS X IP Address Setup 1) Go to your system preferences, go to network. Make sure next to Configure, you have it set under Using DHCP 27 2-3-6 Tablet/Smartphone Setup iOS (iPhone or iPad) Go to your settings on your tablet or smart phone First, make sure JavaScript is On: Go to Settings icon Select (a) Safari > make sure (b) JavaScript is ON. Go back to Home Screen > Select Settings > In Wi-Fi Networks, select (c) Hawking_HOD45B_2.4GHz > (d) Make sure your Wi-Fi is connected to Hawking_HOD45B_2.4GHz 28 Android (Android 2.1 +) Go to Settings Go to Wireless & Networks Check Turn on Wi-Fi and then click on Wi-Fi settings Look for Hawking_HOD45B_2.4GHz, then select to connect 29 2-3-7 Accessing the Web Page User Interface After the IP address setup is complete, please open your web browser. In the address field, please type: 192.168.1.230 and press enter. The following message should be shown:
Please input user name and password in the field respectively, Default Username: admin Default Password: 1234 Press OK button, and you will then see the management interface of this access point:
30 NOTE: If you cant see the web management interface, and you are being prompted to input user name and password again, it means you didnt input username and password correctly. Please retype user name and password again. If you are certain that user name and password you typed are correct, please go to 5-2 Troubleshooting to perform a factory reset, to set the password back to default value. 31 32 2-4 Quick Setup This access point provides a Quick Setup procedure, which will help you to complete all required settings you need to access the Internet in very short time. Please follow the following instructions to complete the Quick Setup:
Please go to Quick Setup Wizard menu by clicking Quick Setup button. 33 On the drop down box, please choose the wireless mode you wish to use. There are 5 modes that the HOD45B supports:
Access Point Station-Infrastructure (Bridge) Bridge Point to Point Bridge Point to Multi-Point WDS Universal Repeater Mode
- Please go to section 2-4-1
- Please go to section 2-4-2
- Please go to section 2-4-3
- Please go to section 2-4-4
- Please go to section 2-4-5
- Please go to section 2-4-6 If youre not sure, please contact your network administrator. Choosing a wrong mode will cause wireless and network issues. 34 2-4-1 Setup Procedure for Access Point 2 2 1 4 1 4 3 3 5 7 6 Shows you if the wireless is enabled/disabled Wireless (1):
ESSID (2):
The HOD45B transmits in both 2.4GHz and 5GHz WiFi frequencies. Please input the ESSID (the name used to identify this wireless access point) for each frequency here. You can input up to 32 alphanumerical characters. PLEASE NOTE THAT ESSID IS CASE SENSITIVE. Default SSID 2.4GHz: Hawking_HOD45B_2.4GHz 5GHz: Hawking_HOD45B_5GHz 35 Band (3):
Please select the wireless band you wish to use. By selecting different band setting, youll be able to allow or deny the wireless client of a certain band. 2.4GHz Band If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless clients using the wireless band you select (802.11b, 802.11 Draft-N, or 802.11g) will be able to connect to this access point. If you select 2.4GHz (B+G), then only wireless clients using 802.11b and 802.11g band will be able to connect to this access point. If you want to allow 802.11b, 802.11g, and 802.11 Draft-N clients to connect to this access point, select 2.4GHz (B+G+N). 5GHz Band 5GHz (A): this mode allows 802.11a wireless network client to connect this router (maximum transfer rate 54Mbps for 802.11a clients). 5GHz (N): this mode allows 802.11n wireless network client to connect this router (maximum transfer rate 300Mbps for 802.11n clients). 5GHz (A+N): this mode allows 802.11a and 802.11n wireless network client to connect this router (maximum transfer rate 54Mbps for 802.11a clients, and maximum 300Mbps for 802.11n clients). Channel Number (4): Please select a channel number you wish to use. If you know a certain channel number is being used by other wireless access points nearby, please refrain from using the same channel number 36 Associated Clients (5): Click Show Active Clients button and a new popup window will appear which contains the information about all wireless clients connected to this access point. You can click Refresh button in popup window to keep information up-to-date. Adv. IP Address (6) This section allows you to set an IP Address and subnet mask to fit your network if needed. Uncheck the box to input. Otherwise, the default IP Address is 192.168.1.230 After you finish with all settings, please click Next (7) button. If you wish to have security, please select your level of security here. Refer to Section 3-4-3 for descriptions of security types. Click Apply for the device to restart. Click Back if you wish to make changes. Plug the HOD45B into your router or network. Congratulations, you have set up the HOD45B in Access Point!
37 2-4-2 Setup Procedure Station-Infrastructure (Wireless Bridge) 1 2 3 Main ESSID (1): The wireless name of the network you wish to bridge to. Site Survey (2):
When you select bridge mode, you have to associate it with a working access point. Click Select Site Survey, a Wireless Site Survey Table will pop up and list all available access points nearby. Select one access point in the table and it will join wireless LAN through this access point. Note: The HOD45B will only repeat a 2.4GHz or a 5GHz network. Blue will be 2.4GHz networks and orange will be 5GHz 38 Adv. IP Address (4) This section allows you to set an IP Address and subnet mask to fit your network if needed. Uncheck the box to input. Otherwise, the default IP Address is 192.168.1.230 If the network you selected was a secure network, a password field will appear under the site survey. Please enter the wireless password here. When you finish with all settings, press Next . Click Apply for the device to restart. Click Back if you wish to make changes. Plug the devices that wish to use this as a Bridge. Congratulations, you have set up the HOD45B as a Bridge!
39 2-4-3 Setup procedure for AP Bridge-Point to Point:
1 3 1 3 2 4 5 2 4 5 7 6 Wireless (1):
Shows you if the wireless is enabled/disabled Band (2):
Please select the wireless band you wish to use. By selecting different band setting, youll be able to allow or deny the wireless client of a certain band. 2.4GHz Band If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless clients using the wireless band you select (802.11b, 40 802.11 Draft-N, or 802.11g) will be able to connect to this access point. If you select 2.4GHz (B+G), then only wireless clients using 802.11b and 802.11g band will be able to connect to this access point. If you want to allow 802.11b, 802.11g, and 802.11 Draft-N clients to connect to this access point, select 2.4GHz (B+G+N). 5GHz Band 5GHz (A): this mode allows 802.11a wireless network client to connect this router (maximum transfer rate 54Mbps for 802.11a clients). 5GHz (N): this mode allows 802.11n wireless network client to connect this router (maximum transfer rate 300Mbps for 802.11n clients). 5GHz (A+N): this mode allows 802.11a and 802.11n wireless network client to connect this router (maximum transfer rate 54Mbps for 802.11a clients, and maximum 300Mbps for 802.11n clients). Channel Number (3): Please select a channel number you wish to use. Please note that this should be the same channel as the other bridge you wish to connect to. Mac Address (4):
Please input the MAC address of the other bridge you wish to make a connection with Set Security (5):
Click this button to select an encryption mode for this wireless link, a new popup window will appear. Note: the security must be the same on the other bridge. Adv. IP Address (6) This section allows you to set an IP Address and subnet mask to 41 fit your network if needed. Uncheck the box to input. Otherwise, the default IP Address is 192.168.1.230 When you finish with all settings, please click Next(7); Plug in the devices that you wish to bridge. Congratulations, you have set up the HOD45B in AP Bridge-Point to Point!
42 2-4-4 Setup procedure for AP Bridge-Point to Multi-Point 1 3 2 4 5 1 2 3 4 5 7 6 Shows you if the wireless is enabled/disabled Wireless (1):
Band (2):
Please select the wireless band you wish to use. By selecting 43 different band setting, youll be able to allow or deny the wireless client of a certain band. 2.4GHz Band If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless clients using the wireless band you select (802.11b, 802.11 Draft-N, or 802.11g) will be able to connect to this access point. If you select 2.4GHz (B+G), then only wireless clients using 802.11b and 802.11g band will be able to connect to this access point. If you want to allow 802.11b, 802.11g, and 802.11 Draft-N clients to connect to this access point, select 2.4GHz (B+G+N). 5GHz Band 5GHz (A): this mode allows 802.11a wireless network client to connect this router (maximum transfer rate 54Mbps for 802.11a clients). 5GHz (N): this mode allows 802.11n wireless network client to connect this router (maximum transfer rate 300Mbps for 802.11n clients). 5GHz (A+N): this mode allows 802.11a and 802.11n wireless network client to connect this router (maximum transfer rate 54Mbps for 802.11a clients, and maximum 300Mbps for 802.11n clients). Channel Number (3): Please select a channel number you wish to use. Please note that this should be the same channel as the other bridge you wish to connect to. Mac Address (4):
Please input the MAC addresses of the other bridges you wish to make a connection with. 44 Set Security (5):
Click this button to select an encryption mode for this wireless link, a new popup window will appear. Note: the security must be the same on the other bridges. Adv. IP Address (6) This section allows you to set an IP Address and subnet mask to fit your network if needed. Uncheck the box to input. Otherwise, the default IP Address is 192.168.1.230. When you finish with all settings, please click Next (7); Plug in the devices that you wish to bridge. Congratulations, you have set up the HOD45B in AP Bridge-Point to Multi-point!
45 2-4-5 Setup Procedure for AP-Bridge WDS 1 4 2 3 2 1 1 3 4 5 6 5 6 8 7 Wireless (1):
Shows you if the wireless is enabled/disabled Band (2):
2.4GHz Band 46 If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless clients using the wireless band you select (802.11b, 802.11 Draft-N, or 802.11g) will be able to connect to this access point. If you select 2.4GHz (B+G), then only wireless clients using 802.11b and 802.11g band will be able to connect to this access point. If you want to allow 802.11b, 802.11g, and 802.11 Draft-N clients to connect to this access point, select 2.4GHz (B+G+N). 5GHz Band 5GHz (A): this mode allows 802.11a wireless network client to connect this router (maximum transfer rate 54Mbps for 802.11a clients). 5GHz (N): this mode allows 802.11n wireless network client to connect this router (maximum transfer rate 300Mbps for 802.11n clients). 5GHz (A+N): this mode allows 802.11a and 802.11n wireless network client to connect this router (maximum transfer rate 54Mbps for 802.11a clients, and maximum 300Mbps for 802.11n clients). SSID (3):
Please input the ESSID (the name used to identify this wireless access point) here. You can input up to 32 alphanumerical characters. PLEASE NOTE THAT ESSID IS CASE SENSITIVE. Channel Number (4):
The HOD45B transmits in both 2.4GHz and 5GHz WiFi frequencies. Please select a channel number you wish to use. Please note that this should be the same channel as the other WDS devices you plan to connect to. 47 Mac Address (5):
Please input the MAC addresses of the other WDS devices you wish to make a connection with. Set Security (6):
Click this button to select an encryption mode for this wireless link, a new popup window will appear. Note: the security must be the same on the other WDS Devices Adv. IP Address (7) This section allows you to set an IP Address and subnet mask to fit your network if needed. Uncheck the box to input. Otherwise, the default IP Address is 192.168.1.230. When you finish with all settings, please click Next (8); Connect youre your wireless devices to the WDS network. Congratulations, you have set up the HOD45B in AP Bridge-WDS!
48 2-4-6 Setup Procedure for Universal Repeater On the drop down box, please select Universal Repeater. It may take a few second to load because once this mode is select, it will scan for available networks to extend. Step 1) This will prompt you to create a custom name. By default, the range extender will be the same SSID as your original wireless network. If you wish to change it, please uncheck and manually input a custom name. Otherwise, leave checked. Step 2) Please select your wireless network from the list below by selecting the network with your mouse. If your wireless network does not appear, please click Scan so our HOD45B can rescan the wireless networks. Blue networks are 2.4GHz and orange networks are 5GHz. You can also manually input your SSID and channel if you know them. Step 3) After you select your network, press Connect to proceed to the next step. If you wish to change your IP address, refer to the Advanced IP settings before you select Next. 49 Adv. IP Address This section allows you to set an IP Address and subnet mask to fit your network if needed. Uncheck the box to input. Otherwise, the default IP Address is 192.168.1.230. Step 4) If your wireless network requires a password, underneath the SSID, a password field will appear. This key should be the exact same key as your wireless access point or wireless router. Please contact your network administrator if you do not know the security code. Click Next when done. Step 5) Final summary page. If everything seems to be in order, please click Finish Your device should automatically reboot and restart after 30 seconds. If you need to make changes, please click Back Congratulations! You have setup the HOD45B in universal repeater. After setup, the HOD45B will have the same name as the network you picked. This allows for a seamless WiFi network. Note: If the original networks SSID are the same for both 2.4GHz and 5GHz networks, 50 please make sure the security keys for both are the same. Otherwise, the seamless roaming will not work. 51 Chapter III General Setup In this chapter, youll know how to change the major settings of the HOD45B. Log onto the device and click on General Setup. 52 3-1 Time zone and time auto-synchronization Please follow the following instructions to set time zone and time auto-synchronization parameters:
Please click General Setup at the top of web management interface, select System on the left hand column, and select Time Zone. The time zone settings will be displayed in your web browser: Please select the correct time zone from the drop-down list, and input the IP address or host name of the time server. If you want to enable daylight savings setting, please check Enable Function box, and set the duration of daylight setting. After you finish with all settings, please click Apply button and the following message will be displayed on your web browser:
53 Please click Go Back to go back to previous setup menu, or click Apply to reboot the access point so the settings will take effect. Please wait 30-60 seconds for the access point to reboot. 54 3-2 Change Management password Default password of this access point is 1234, and its displayed on the login prompt when accessed from the web browser. Theres a security risk if you dont change the default password, since everyone can see it. This is very important when you have wireless function enabled. To change password, please follow the instructions:
Please click General Setup at top of web management interface, select System tab on the left hand column, and then click Password Settings, and the following message will be displayed on your web browser:
1 2 3 Current Please input current password here. Password (1):
New Password (2):
Please input new password here. Confirm Please input new password here again. Password (3):
55 If the password you typed in New Password (2) and Confirm Password (3) field are not the same, youll see the following message:
Please retype the new password again when you see above message. If you see the following message:
It means the content in Current Password field is wrong, please click OK to go back to previous menu, and try to input current password again. If the current and new passwords are correctly entered, after you click Apply, youll be prompted to input your new password:
56 Please use new password to enter web management interface again, and you should be able to login with new password. 57 3-3 Wired LAN Configuration Before all computers using wired Ethernet connection (i.e. the computers connected to this access points LAN port) can communicate with each other and access Internet, they must have a valid IP address. There are two ways to assign IP addresses to computers: static IP address (set the IP address for every computer manually), and dynamic IP address (IP address of computers will be assigned by access point automatically. Its recommended for most computers to use dynamic IP address, it will save a lot of time on setting IP addresses for every computer, especially when there are a lot of computers in your network; for servers and network devices which will provide services to other computers and users that come from the Internet, a static IP address should be used. Suggestions on IP Address numbering plan:
If you have no idea on how to define an IP address plan for your network, here are some suggestions. 1. A valid IP address has 4 fields: a.b.c.d, for most of home and company users, its suggested to use 192.168.c.d, where c is an integer between 0 and 254, and d is an integer between 1 and 254. This router is capable to work with up to 253 clients, so you can set d field of IP address of router as 1 or 254 (or any number between 1 and 254), and pick a number between 0 and 254 for field c. 2. In most cases, you should use 255.255.255.0 as subnet mask, which allows up to 253 clients (this also meets routers capability of working with up to 253 clients). 3. For all servers and network devices which will provide services to other people (like Internet service, print service, and file service), they should use static IP address. Give each of them a unique number between 1 and 253, and maintain a list, so everyone can locate those servers easily. 4. For computers which are not dedicated to provide specific service to others, they should use dynamic IP address. 58 Please click General Setup at the top of web management interface and click Local Network on the left hand column. There are two setup groups here: LAN IP and DHCP Server 3-3-1 Local Network 1 2 3 4 5 IP address (1):
Please input the IP address of this access point. Subnet Mask (2):
Please input subnet mask for this network. Gateway Address (3): Please input your gateway address for the network. 802.1d Spanning Tree (4): Spanning-Tree Protocol (STP) prevents loops from being formed when switches or bridges are interconnected via multiple paths DHCP Server (5):
If you want to activate DHCP server function of this access point, select Enabled, or set it to Disabled. Recommended Value if you dont know what to fill:
IP Address: 192.168.1.230 Subnet Mask: 255.255.255.0 802.d Spanning Tree: Disabled DHCP Server: Disabled Gateway Address: (leave it blank) 59 3-3-2 DHCP Server:
1 2 3 4 These settings are only available when DHCP Server in LAN IP section is Enabled. Lease Time (1):
Please choose a lease time (the duration that every computer can keep a specific IP address) of every IP address assigned by this access point from dropdown menu. DHCP Client Start IP (2): Please input the start IP address of the IP range. DHCNP Client End IP (3):Please input the end IP address of the IP range. Domain Name (4):
If you wish, you can also optionally input the domain name for your network. This is optional. Recommended Value if you dont know what to fill:
Lease Time: Two Weeks (or Forever, if you have less than 20 computers) Start IP: 192.168.1.100 End IP: 192.168.1.200 Domain Name: (leave it blank) NOTE:
1. The number of the last field (mentioned d field) of End IP must be greater than Start IP, and can not be the same as routers IP address. 2. The former three fields of IP address of Start IP, End IP, and IP 60 Address of LAN IP section (mentioned a, b, and c field) should be the same. 3. These settings will affect wireless clients too. 3-3-3 Static DHCP Leases Table:
This function allows you to assign a static IP address to a specific computer forever, so you dont have to set the IP address for a computer, and still enjoy the benefit of using DHCP server. Maximum 16 static IP addresses can be assigned here.
(If you set Lease Time to forever in DHCP Server section, you can also assign an IP address to a specific computer permanently, however, you will not be able to assign a certain IP address to a specific computer, since IP addresses will be assigned in random order by this way). 2 Enable Static 1 4 Check this box to enable this function, 3 DHCP Leases (1): otherwise uncheck it to disable this function. MAC Address (2):
Input the MAC address of the computer or network device
(total 12 characters, with character from 0 to 9, and from a to f, like 001122aabbcc) IP address (3):
Input the IP address you want to assign to this computer or network device Add (4):
After you inputted MAC address and IP address pair, click this button to add the pair to static DHCP leases table. If you want to remove all characters you just entered, click Clear. After you clicked Add, the MAC address and IP address mapping will be added to Static DHCP Leases Table section. 61 1 3 2 If you want to delete a specific item, please check the Select box of a MAC address and IP address mapping (1), then click Delete Selected button (2); if you want to delete all mappings, click Delete All (3). After you finish all LAN settings, please click Apply button on the bottom of this page. After you click Apply, the following message will be displayed on your web browser:
Press Go Back to save the settings made and go back to web management interface;
press Apply to save the settings made and restart the router so the settings will take effect after it reboots. 62 3-4 Wireless Network If your computer, PDA, game console, or other network devices is equipped with a wireless network adapter, you can use the wireless function of this access point to let them connect to the Internet and share resources with other computers. Please click General Setup tab at the top of web management interface, and then click Wireless Configuration tab on the left hand column. The following message will be displayed on your web browser:
Please click Go Back to go back to previous setup menu, or click Apply to reboot the access point so the settings will take effect. Please wait 30-60 seconds for the access point to reboot 63 3-4-1 Basic Wireless Settings Please click General Setup menu at the top of web management interface, then click 2.4GHz Wireless Configuration or 5GHz Wireless Configuration on the left hand column. Choose Basic Settings. Next to the Mode option, please select your Mode. 3-4-1-1 Access Point Standard default mode. The HOD45B will broadcast a WiFi signal for other computers and devices to connect to. Must be plugged into the router or network after setup. 1 4 3 2 Band (1):
Please select the radio band from one of following options:
64 2.4GHz 2.4 GHz (B) 2.4 GHz (N) 2.4GHz band, only allows 802.11b wireless network clients to connect to this router (maximum transfer rate 11Mbps). 2.4GHz band, only allows 802.11n wireless network clients to connect to this router (maximum transfer rate 300Mbps). 2.4 GHz (B+G) 2.4GHz band, only allows 802.11b and 802.11g wireless network clients to connect to this router (maximum transfer rate 11Mbps for 802.11b clients, and maximum 54Mbps for 802.11g clients). 2.4 GHz (G) 2.4GHz band, only allows 802.11g wireless network clients to 2.4 GHz (B+G+N) 2.4GHz band, allows 802.11b, 802.11g, and 802.11n wireless connect to this router (maximum transfer rate 54Mbps). network clients to connect to this router (maximum transfer rate 11Mbps for 802.11b clients, maximum 54Mbps for 802.11g clients, and maximum 300Mbps for 802.11n clients). 5GHz 5GHz (A):
5GHz band, this mode allows 802.11a wireless network client to connect this router (maximum transfer rate 54Mbps for 802.11a clients). 5GHz (N):
5GHz band, this mode allows 802.11n wireless network client to connect this router (maximum transfer rate 300Mbps for 802.11n clients). 5GHz (A+N):
5GHz band, this mode allows 802.11a and 802.11n wireless network client to connect this router (maximum transfer rate 54Mbps for 802.11a clients, and maximum 300Mbps for 802.11n clients). NOTE: If you dont have special reason to limit the type of allowed wireless clients, its recommended to choose 2.4 GHz (B+G+N) and 5GHz (A+N) to maximize wireless client compatibility. 65 ESSID (2):
This is the name of wireless access point. You can type any alphanumerical characters here, maximum 32 characters. ESSID is used to identify your own wireless access point from others when there are other wireless access points in the same area. Default SSID 2.4GHz: Hawking_HOD45B_2.4GHz 5GHz: Hawking_HOD45B_5GHz Its recommended to change default ESSID value to the one which is meaningful to you, such as, myhome, office_room1, etc. Channel Number (3): Please select a channel from the dropdown list of Channel Number, You can choose any channel number you want to use, and almost all wireless clients can locate the channel youre using automatically without any problem. However, its still useful to remember the channel number you use, as some wireless clients support manual channel number selecting, and this would help in certain scenarios when there are radio communication conflicts. TIP: You can try to change channel number to another one if you think the data transfer rate is too slow. There could be some other wireless routers using the same channel, which will disturb the radio communication between wireless client and the wireless router. Associated Clients (4): Click Show Active Clients button, then an Active Wireless Client Table will pop up. You can see the status of all active wireless stations that are connecting to the access point. After you finish these wireless settings, please click Apply button, button, and the following message will be displayed on your web browser:
66 Please click Go Back to go back to previous setup menu; to continue on access point setup, or click Apply to reboot the access point so the settings will take effect. Please wait 30-60 seconds for the access point to reboot. 67 3-4-1-2 Station-Infrastructure (Bridge) The HOD45B will allow you connect wired devices wirelessly to an existing wireless router or access point. It will bridge these devices wirelessly with your network. It will not broadcast any WiFi signal. It will only make a wireless connection between the Access Point and the HOD45B. The HOD45B will only connect to either 2.4GHz or a 2 4 3 5GHz network. Band (2):
Select the band you want to use. Refer to 3-4-1-1 for definitions. SSID (3):
This is the name of wireless network. You can type the SSID of the network you would like to connect here. Site Survey (4):
When you use this wireless router as a wireless station for Ethernet network device to have wireless capability, you have to associate it with a working access point. Click Select Site Survey button, then a Wireless Site Survey Table will pop up. It will list all available access points nearby. You can select one access point in the table and it will join wireless LAN through this access point. 68 3-4-1-3 AP Bridge-Point to Point Similar to station-infrastructure, this requires two HOD45Bs on each end. This will create a wireless bridge between these two points. No WiFi signal will be broadcast and it will only make a wireless connection between those two points. 3 2 4 5 NOTE: Two HOD45Bs must use the same mode, band, channel number, and security setting!
Band (2):
Select the band you want to use, the two HOD45Bs must use the same setting. Refer to 3-4-1-1 for definitions. Channel Number (3):
Select the channel you want to use, the two wireless HOD45Bs must use the same setting. MAC Address (4):
Input the MAC address of another HOD45B Security Settings (5):
Click to setting security for this connection
(Please go to section 3-4-3 Wireless Security for detailed instructions). 69 3-4-1-4 AP Bridge-Point to Multi-Point Similar to AP Bridge Point to Point, this allows you to connect several HOD45Bs to one point. No WiFi signal will be broadcast and it will only make a wireless connection between the HOD45Bs. 3 2 4 5 Band (2):
Select the band you want to use, all HOD45Bs must use the same setting. Refer to 3-4--1 for definitions. Channel Number (3):
Select the channel you want to use, all HOD45Bs must use the same setting MAC address (4) Input the MAC address of other HOD45Bs. 1 to 4:
Security Settings (5):
Click to set security settings for this connection
(Please go to section 3-4-3 Wireless Security for detailed instructions). 70 3-4-1-5 AP Bridge-WDS Wireless Distributing System. This allows you to create a wireless network using up to four HOD45Bs using the same SSID (wireless name). It will broadcast a WiFI signal. NOTE: For WDS mode, the output signal nature is the same as that of normal AP mode. 3 4 2 5 6 7 Band (2):
Select the band you want to use, all the HOD45Bs must use the same setting. Refer to 3-4-1-1 for definitions. SSID (3):
Input the SSID of your HOD45Bs, the setting should be the same with other HOD45Bs for the convenience of roaming. Channel Number (4):
Select the channel you want to use, all the HOD45Bs must use the same setting. Associated Clients (5): Click Show Active Clients button, then an Active Wireless Client Table will pop up. You can see the status of all active wireless stations that are connecting to the access point. 71 MAC address Input the MAC address of other HOD45Bs 1 to 4 (6):
Security Setting (7):
Click to set security settings for this connection
(Please go to section 3-4-3 Wireless Security for detailed instructions). 72 3-4-1-6 Universal Repeater In this mode, the HOD45B will act as a wireless repeater; it can be a wireless bridge and access point at the same time. It can use bridge mode to connect to a Root access point and use the access point function to service all wireless stations within its coverage. In this mode, the HOD45B will repeat the wireless signal of any existing wireless router/access point. It will act as a wireless relay and create a larger and seamless network for your wireless devices to connect to NOTE: For Repeater Mode, this router will demodulate the received signal, checking if this signal is noise for the operating network then have the signal modulated and amplified again. The output power of this mode is the same as that of WDS and normal AP mode. 2 5 4 7 3 6 Band (2):
Select the band you want to use, all the HOD45Bs must use the same setting. Refer to 3-4-1-1 for definitions. SSID (3):
This is the name of wireless router. You can type any alphanumerical characters here, maximum 32 characters. SSID is used to identify your own wireless router from others when there are other wireless routers in the same area. Default SSID is default, its recommended to change default ESSID value to 73 the one which is meaningful to you, like myhome, office_room1, etc. Channel Select the channel you want to use, all the wireless Number (4):
clients must use the same setting. Associated Clients (5): Click Show Active Clients button, then an Active Wireless Client Table will pop up. You can see the status of all active wireless stations that are connecting to the access point. Root AP SSID (6):
In Universal Repeater mode, this device can act as a station to connect to a Root AP. You should assign the SSID of the Root AP here or click Select Site Survey button to choose a Root AP. Site Survey (7):
Click Select Site Survey button, then a Wireless Site Survey Table will pop up. It will list all available access points nearby. You can select one access point in the table and the router will join wireless LAN through this access point. After you finish the wireless setting, please click Apply button, after you click Apply, the following message will be displayed on your web browser:
Please click Continue to back to previous setup menu; to continue on router setup, or click Apply to reboot the router so the settings will take effect (Please wait for about 30 seconds while router is rebooting). 74 3-4-2 Advanced Wireless Settings This access point provides some advanced control of wireless parameters, if you want to configure these settings, please click General Setup at the top of web management interface and click Wireless Configuration on the left hand column. Choose Advanced Settings. 1 2 3 4 7 8 9 10 12 5 6 11 Fragment Threshold(1): Set the Fragment threshold of wireless radio. Do not modify the default value if you do not understand the function, default value is 2346. RTS Threshold(2):
Set the RTS threshold of wireless radio. Do not modify the default value if you do not understand the function, default value is 2347. 75 Beacon Interval(3):
Set the beacon interval of wireless radio. Do not modify the default value if you do not understand the function, default value is 100. DTIM Period(4):
Set the DTIM period of wireless radio. Do not modify the default value if you do not understand the function, default value is 3. Data Rate(5):
Set the wireless data transfer rate to a certain value. Since most of wireless devices will negotiate with each other and pick a proper data transfer rate automatically. It is not necessary to change this value unless you know what will happen after modification. N Data Rate(6):
Same as above, but only for 802.11n clients. Channel Width(7):
Set channel width of wireless radio. Do not modify the default value if you do not understand the function, default setting is Auto 20/40 MHz. Preamble Type(8):
Set the type of preamble, do not modify the default value if you do not know what it is, default setting is Short Preamble. Broadcast ESSID(9): Decide if the wireless access point will broadcast its own ESSID or not. You can hide the ESSID of your wireless access point (set the option to Disable), so only those people who know the ESSID of your wireless access point can connect to the unit. CTS Protect(10):
Enabling this setting will reduce the chance of radio signal collisions between 802.11b and 802.11g/n wireless access points. It is recommended to set this option to Auto or Always. However, if you set to None, your wireless access point should be able to function properly. Transmit Power(11): You can set the output power of wireless radio. Unless you are using this wireless access point in a large open space, you may 76 not have to set output power to 100%. This will enhance security (malicious / unauthorized users in distance will not be able to reach your wireless access point). WMM(12):
Wi-Fi MultiMedia (WMM) will enhance the data transfer performance of multimedia contents when they are being transferred over a wireless network. If you do not understand the function, then it is safe to set this option to Enable, however, default value is Disable. After you finish these wireless settings, please click Apply button, button, and the following message will be displayed on your web browser:
Please click Go Back to go back to previous setup menu; to continue on access point setup, or click Apply to reboot the access point so the settings will take effect. Please wait 30-60 seconds for the access point to reboot. 77 3-4-3 Security Settings It is important to set your wireless security settings properly! If you do not configure a wireless security setting, unauthorized users can use your network and/or obtain valuable data without your consent. To set wireless security settings, please click General Setup tab at the top of web management interface, then click Wireless Configuration on the left hand column. Choose Security Settings. Please select an encryption method from the Encryption dropdown menu, there are four options:
Disable WEP WPA WPA Radius
-Please go to section 3-4-3-1
-Please go to section 3-4-3-2
-Please go to section 3-4-3-3
-Please go to section 3-4-3-4 3-4-3-1 Disable wireless security When you select this mode, data encryption is disabled, and every wireless device in proximity will be able to connect your wireless access point if no other security measure is enabled (like MAC address access control - see section 3-4-4, or disable SSID broadcast). Use this option only when you want to allow any user to use your wireless access point, and you are not concerned about unauthorized access to your files and/or transfers over your network. 3-4-3-2 WEP - Wired Equivalent Privacy When you select this mode, the wireless access point will use WEP encryption, and the 78 following setup menu will be shown on your web browser:
2 4 3 5 6 7 8 10 11 12 13 There are two types of WEP key length: 64-bit and 128-bit. Using 128-bit is safer than 64-bit, but will reduce some data transfer performance. 9 Key Length (2):
Key Format (3):
There are two types of key format: ASCII and Hex. When you select a key format, the number of characters of key will be displayed. For example, if you select 64-bit as key length, and Hex as key format, youll see the message at the right of Key Format is Hex (10 characters), which means the length of WEP key is 10 characters. Default Tx Key (4):
You can set up to four sets of WEP key, and you can decide which key is being used by default here. If you dont know which one you should use, select Key 1. Encryption Key Input WEP key characters here, the number of 1 to 4 (5-8):
characters must be the same as the number displayed at Key Format field. You can use any alphanumerical characters (0-9, a-z, and A-Z) if you select ASCII key format, and if you select 79 Hex as key format, you can use characters 0-9, a-f, and A-F. You must enter at least one encryption key here, and if you entered multiple WEP keys, they should not be same with each other. Enable 802.1x IEEE 802.1x is an authentication protocol. Every Authentication (9):
user must use a valid account to login to this wireless access point before accessing the wireless LAN. The authentication is processed by a RADIUS server. This mode only authenticates user by IEEE 802.1x, but it does not encryption the data during communication. If there is a RADIUS server in you environment, please enable this function. Check this box and another sub-menu will appear:
Please input the IP address of RADIUS server here. Please input the port number of RADIUS server here. Please input the password here. RADIUS Server IP address (10):
RADIUS Server Port (11):
RADIUS Server 23561 2Hyux
#@xmL Hex (10 characters): 287d2aa732 ASCII (5 characters): pilot phone TIPS: Examples of WEP key ASCII (13 characters): digitalFAMILY 82Jh26xHy3m&n Password (12):
After you finish WEP setting, please click Apply (13) button and the following message only have to input the WEP key on wireless client once, and it is suggested that to use a complex WEP key to improve security level. Once you have chosen a password, write easy to remember! Wireless clients will automatically remember the WEP key, so you To improve security level, do not use words that can be found in a dictionary or are Hex (26 characters): 9284bcda8427c9e036f7abcd84 it down and keep it in a secure place. 1152dabc85 80 will be displayed on your web browser:
Please click Go Back to go back to previous setup menu, or click Apply to reboot the access point so the settings will take effect. Please wait 30-60 seconds for the access point to reboot. 3-4-3-3 Wi-Fi Protected Access (WPA):
When you select this mode, the wireless access point will use WPA encryption, and the following setup menu will be shown on your web browser:
3 4 2 5 WPA Unicast Please select a type of WPA cipher suite. Cipher Suite (2):
Available options are: WPA (TKIP), WPA2 (AES), and WPA2 Mixed. You can select one of them, but you have to make sure your wireless client support the cipher you selected. Pre-shared Select the type of pre-shared key, you Key Format (3):
can select Passphrase (8 or more alphanumerical characters, up to 63), or Hex (64 characters of 0-9, and a-f). 81 Pre-shared Please input the WPA passphrase here. Key (4):
Its not recommended to use a word that can be found in a dictionary due to security reason. After you finish WPA Pre-shared key setting, please click Apply button (5) and the following message will be displayed on your web browser:
Please click Go Back to go back to previous setup menu, or click Apply to reboot the access point so the settings will take effect. Please wait 30-60 seconds for the access point to reboot. NOTE: Some wireless clients (especially those manufactured before year 2003) only support WEP or WPA (TKIP) cipher. A driver upgrade would be needed for those clients to use WPA and WPA2 encryption. 3-4-3-4 WPA RADIUS:
If you have a RADIUS server, this access point can work with it and provide safer wireless authentication. 82 3 4 5 2 6 WPA Unicast Please select a type of WPA cipher suite. Cipher Suite:
Available options are: WPA (TKIP), WPA2 (AES), and WPA2 Mixed. You can select one of them, but you have to make sure your wireless client support the cipher you selected. RADIUS Server IP address (3):
RADIUS Server Please input the IP address of your Radius authentication server here. Please input the port number of your Port (4):
Radius authentication server here. Default setting is 1812. RADIUS Server Please input the password of your Radius Password (5):
After you finish with all settings, please click Apply (6) button and the following authentication server here. message will be displayed on your web browser:
Please click Go Back to go back to previous setup menu, or click Apply to reboot the access point so the settings will take effect. Please wait 30-60 seconds for the access 83 point to reboot. 84 3-4-4 Wireless Access Control This function will help you prevent unauthorized users from connecting to your wireless access point; only those wireless devices who have a MAC address you assigned can gain access to your wireless access point. Use this function with other security measures described in previous section, to create a safer wireless environment. You can add up to 20 MAC addresses by using this function. Please click General Setup at the top of web management interface and click Wireless Configuration on the left hand column. Select Access Control. 1 2 3 4 5 6 8 7 All allowed MAC addresses will be displayed in MAC Address Filtering Table. Enable Wireless To enforce MAC address filtering, you have to check Access Control (1):
Enable Wireless Access Control. When this item is unchecked, wireless access point will not enforce MAC address filtering of 85 wireless clients. MAC Address (2):
Input the MAC address of your wireless devices here, dash ( - ) or colon ( : ) are not required. (i.e. If the MAC address label of your wireless device indicates aa-bb-cc-dd-ee-ff or aa:bb:cc:dd:ee:ff , just input aabbccddeeff. Comment (3):
You can input any text here as the comment of this MAC address, like ROOM 2A Computer or anything. You can input up to 16 alphanumerical characters here. This is optional and you can leave it blank, however, its recommended to use this field to write a comment for every MAC addresses as a memory aid. Add (4):
Click Apply button to add the MAC address and associated comment to the MAC address filtering table. Clear (5):
Click Clear to remove the value you inputted in MAC address and comment field. Delete Selected (6):
If you want to delete a specific MAC address entry, check the select box of the MAC address you want to delete, then click Delete Selected button. (You can select more than one MAC addresses). Delete All (7):
If you want to delete all MAC addresses listed here, please click Delete All button. After you finish with all settings, please click Apply (8) button and the following message will be displayed on your web browser:
86 Please click Go Back to go back to previous setup menu, or click Apply to reboot the access point so the settings will take effect. Please wait 30-60 seconds for the access point to reboot. 87 3-4-5 Wi-Fi Protected Setup (WPS) Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless network clients and this wireless access point. You dont have to select an encryption mode and input a long encryption passphrase every time when you need to set up a wireless client, you only have to press a button on the wireless client and this wireless access point, and the WPS will automatically configure for you. This wireless access point supports two types of WPS: Push-Button Configuration (PBC), and PIN code. If you want to use PBC, you have to push a specific button on the wireless client to start WPS mode, and switch this wireless access point to WPS mode too. You can push Reset/WPS button of this wireless access point, or click Start PBC button in the web configuration interface to do this; if you want to use PIN code, you have to know the PIN code of wireless client and switch it to WPS mode, then provide the PIN code of the wireless client you wish to connect to this wireless access point. The detailed instructions are listed follow:
Please click General Setup at the top of web management interface and click Wireless Configuration on the left hand column. Select WPS 88 1 2 3 4 5 Check this box to enable WPS function, uncheck it to disable WPS. Enable WPS (1) WPS Information (2) WPS Status: If the wireless security (encryption) function of this wireless access point is properly set, youll see Configured message here. If wireless security function has not been set, youll see Not configured. Self PIN code: This is the WPS PIN code of this wireless access point. This code is useful when you need to build wireless connection by WPS with other WPS-enabled wireless devices. SSID: The SSID of this wireless access point will be displayed here. Authentication Mode: The wireless security authentication mode 89 of this wireless access point will be displayed here. If you do not enable security function of the wireless access point before WPS is activated, the access point will auto set the security to WPA
(AES) and generate a set passphrase key for WPS connection. Passphrase Key: The wireless security key of the access point will be displayed here. Config Mode (3) There are Registrar and Enrollee modes for the WPS connection. When Registrar is enabled, the wireless clients will follow the access points wireless settings for WPS connection. When Enrolle mode is enabled, the access point will follow the wireless settings of wireless client for WPS connection. Configure Click Start PBC to start Push-Button style WPS by Push Button (4) setup procedure. This wireless access point will wait for WPS requests from wireless clients for 2 minutes. The WLAN LED light on the wireless access point will be steady for 2 minutes when this wireless access point is waiting for incoming WPS request. Configure by client Please input the PIN code of the wireless client you wish to connect, and click Start PIN button. PinCode (5) The WLAN LED light on the wireless access point will be steady when this wireless access point is waiting for incoming WPS request. 90 3-4-6 Security Tips for Wireless Network Here are some quick tips to help you improve the security level of your wireless network:
1. Never use simple words for your password, such as password or 1234567890. 2. A complicated (combination of numbers, alphabets, and even symbols) WEP key and WPA passphrase is more secure than simple and short words. Remember that the wireless client is capable of keeping the key or passphrase for you, so you only have to input the complicated key or passphrase once. Once you have chosen a password, write it down and keep it in a secure place. 3. You can hide the ESSID of this access point by setting the Broadcast ESSID option to Disable. Your wireless access point will not be found by other people in proximity if they are using the Access Point scanning function of their wireless client, and this can reduce unauthorized access. 4. Use Access Control function, described in section 3-4-4, to allow authorized users access to the wireless access point using their specific MAC address. 91 Chapter IV Status and Tools 4-1 System Status The functions described here will provide you with system related information. To enter system status menu, please either click Status link located at top of web management interface. 4-1-1 System information and firmware version You can use this function to know the system information and firmware version of this access point. Please click Status tab at the top of web management interface. NOTE: Information displayed here may vary. 92 4-1-2 Local Network You can use this function to know the status of your access point. Please click Status menu at the top of web management interface, and then click Local Network on the left hand column. NOTE: Information displayed here may vary. 93 4-1-3 Active DHCP client list If youre using the DHCP server function of this access point, you can use this function to check all active DHCP leases issued by this access point. Please click Status menu at the top of web management interface, and then click Active DHCP Client on the left hand column. All information about active DHCP leases issued by this access point will be displayed here. You can click Refresh button to display latest information. 94 4-1-4 Statistics You can use this function to check the statistics of wireless, LAN, and WAN interface of this access point. Please click Status menu at the top of web management interface, and then click Statistics on the left hand column. You can click Refresh button to display latest information. 95 4-2 Configuration Tools You can back up all configurations of this access point to a file, so you can make several copied of access point configuration for security reason. To backup or restore access point configuration, please follow the instructions:
Please click Tools menu at the top of web management interface, and then click Configuration Tools on the left hand column. 1 3 2 Press Save... button, and youll be prompted to Backup Settings (1):
download the configuration as a file, default filename is default.bin, you can please save it as another filename for different versions, and keep it in a safe place. Restore Press Browse to pick a previously-saved Settings (2):
configuration file from your computer, and then click Upload to transfer the configuration file to access point. After the configuration is uploaded, the access points configuration will be replaced by the file you just uploaded. Restore to Click this button to remove all settings you made, and Factory Default (3):
restore the configuration of this access point back to factory 96 default settings. 97 4-3 Firmware Upgrade The system software used by this access point is known as firmware, just like any applications on your computer, when you replace the old application with a new one;
your computer will be equipped with new function. You can also use this firmware upgrade function to add new functions to your access point, even fix the bugs of this access point. To upgrade firmware, please follow the instructions:
Please click Tools menu at the top of web management interface, and then click Firmware Upgrade on the left hand column. Click Next button if you wish to upgrade your firmware. 98 Click Browse button, and youll be prompted to provide the filename of the firmware upgrade file. Please download the latest firmware file from the Hawking Technologies website at www.hawkingtech.com, and use it to upgrade your access point. After a firmware upgrade file is selected, click Apply button, and the access point will start firmware upgrade procedure automatically. The procedure may take several minutes, please be patient. NOTE: Never interrupt the upgrade procedure by closing the web browser or physically disconnect your computer from router. If the firmware you uploaded is corrupt, the firmware upgrade will fail, and you may have to return this router to the dealer of purchase to ask for help. Warranty is void if you interrupt the upgrade procedure. 99 4-4 System Reset If you think your network performance is bad or you find the behavior of the access point is strange, you can perform a access point reset. Sometimes it will solve the problem. Please click Tools menu at the top of web management interface, and then click Reset on the left hand column. Please click Apply to reset your access point, and it will be available again after a few minutes, please be patient. 100 Chapter V: Software 5-1 Setting up via Software Option The HOD45B can also be configured via a software interface. Note this will work ONLY for Windows operating systems. Insert the CD and run the autorun.exe. You should see a Software option Click on Software and the HOD45B software utility will load. 101 On some systems, Windows may prompt to allow firewall access. Please allow. The software should automatically scan for any available HOD45B on the network. You may also click on Scan to search again. Once detected, please select the HOD45B you wish to configure and click Connect A password prompt will appear:
Username: admin Password: 1234 Note: If you have changed the password, please use the password you selected. Click OK 102 The HOD45B should now have a prompt saying it is Connecting After it has connected, the HOD45B will ask for a device name. If you have several HOD45Bs on the network, it is best to give each a unique device name to differentiate them. Click Next. 103 The next page will ask you to choose your mode. You can select the same modes as outlined in the Web Interface. Select your mode. There will be a diagram describing the mode. Click on the Configuration tab and make your changes. Click Next Network settings should appear. Please adjust if needed. Click Next 104 A summary page will appear. If all is correct, please click Apply The device will now reboot. When done, the settings you have selected should now be in effect! Congratulations, you have configured the HOD45B!
105 5-2 Other Settings on the Software Interface 5-2-1 Firmware Upgrade Connect to the Software UI like in section 5-1. Once connected to the HOD45B, on the left hand column, click on Firmware Upgrade. Click on browse, click on the firmware you downloaded, then click Apply. 5-2-2 Password Settings Connect to the Software UI like in section 5-1. Once connected to the HOD45B, on the left hand column, click on Password Settings. On this page, you can change the admin username/password. Click Apply for settings to take effect. 106 5-2-3 Reset Settings Connect to the Software UI like in section 5-1. Once connected to the HOD45B, on the left hand column, click on Reset Settings. On this page, you can soft reset the unit or factory reset. Choose your option, then click Apply. The unit will now reboot. 107 Chapter VI: Appendix 6-1 Hardware Specification SOC+RF: Ralink RT3662 + RT3092L Gigabit Switch: Realtek RTL8367R Flash: 8MB Parallel Flash RAM: 64MB DDR2 RAM LAN Ports: 10/100/1000M (Auto-MDI/MDI-X) UTP Port x 1 MIMO Technology: 5GHz: 2T2R MIMO, 2.4GHz: 2T2R MIMO Antenna: 5dBi Dual Band Fixed Dipole Antenna x 2 (2T2Rfor 5GHz and 2T2R for 2.4GHz) Output Power:
2.4GHz 11b(11Mbps): 181.5dBm 11g(54Mbps): 171.5dBm 11n: 171.5dBm 5GHz 11a(54Mbps): 141.5dBm 11n(20MHz, MCS23): 141.5dBm 11n(40MHz, MCS23): 141.5dBm Power: 48VDC, 0.5A Switching Power Adapter (for PoE) Temperature Operating: -20~70C, Storage: -40~80C Humidity Operating: Operating: 10~90% (Non Condensing), Storage: Max.95% (Non Condensing) 6-2 Troubleshooting If you find that the access point is working improperly or stops responding, check some of the FAQs below. You can also contact our support by email or phone. Scenario Solution Access point is not a. Please check the connection of power cords and responding to me when I network cables of this access point. All cords and want to access it by web cables should be correctly and firmly inserted into browser the access point. 108 b. If all LEDs on this access point are off, please check the status of A/C power adapter, and make sure its correctly powered. c. You must use the same IP address section which access point uses. d. Are you using MAC or IP address filter? Try to connect the access point by another computer and see if it works; if not, please restore your access point to factory default settings (pressing reset button for over 10 seconds). e. Set your computer to obtain an IP address automatically (DHCP), and see if your computer can get an IP address. f. If you did a firmware upgrade and this happens, contact your dealer of purchase for help. g. If all above solutions dont work, contact the dealer of purchase for help. I cant locate my access a. Broadcast ESSID set to off?
point by my wireless b. All three antennas are properly secured. client c. Are you too far from your access point? Try to get closer. d. Please remember that you have to input ESSID on your wireless client manually, if ESSID broadcast is disabled. File download is very a. Are you using QoS function? Try to disable it and slow or breaks frequently try again. b. Internet is slow sometimes, be patient. c. Try to reset the access point and see if its better after that. d. Try to know what computers do on your local network. If someones transferring big files, other people will think Internet is really slow. e. If this has never happened before, call your Internet service provider to know if there is something wrong with their network. 109 I cant log onto web a. Make sure youre connecting to the correct IP management interface:
address of the access point!
password is wrong b. Password is case-sensitive. Make sure the Caps Lock light is not illuminated. c. If you really forgot the password, do a hard reset. Access point becomes hot a. This is not a malfunction, as long as it is not so hot that you cannot touch it for a prolonged period of time b. If you smell something wrong or see smoke coming out from access point or A/C power adapter, please disconnect the access point and A/C power adapter from utility power (make sure its safe before youre doing this!), and call your dealer of purchase for help. The date and time of all a. Adjust the internal clock of access point. event logs are wrong 110 6-3 Glossary Default Gateway (Access point): Every non-access point IP device needs to configure a default gateways IP address. When the device sends out an IP packet, if the destination is not on the same network, the device has to send the packet to its default gateway, which will then send it out towards the destination. DHCP: Dynamic Host Configuration Protocol. This protocol automatically gives every computer on your home network an IP address. DNS Server IP Address: DNS stands for Domain Name System, which allows Internet servers to have a domain name (such as www.Broadbandaccess point.com) and one or more IP addresses (such as 192.34.45.8). A DNS server keeps a database of Internet servers and their respective domain names and IP addresses, so that when a domain name is requested (as in typing "Broadbandaccess point.com" into your Internet browser), the user is sent to the proper IP address. The DNS server IP address used by the computers on your home network is the location of the DNS server your ISP has assigned to you. DSL Modem: DSL stands for Digital Subscriber Line. A DSL modem uses your existing phone lines to transmit data at high speeds. Ethernet: A standard for computer networks. Ethernet networks are connected by special cables and hubs, and move data around at up to 10/100 million bits per second (Mbps). Idle Timeout: Idle Timeout is designed so that after there is no traffic to the Internet for a pre-configured amount of time, the connection will automatically be disconnected. IP Address and Network (Subnet) Mask: IP stands for Internet Protocol. An IP address consists of a series of four numbers separated by periods, which identifies a single, unique Internet computer host in an IP network. Example: 192.168.1.254. It consists of 2 portions: the IP network address, and the host identifier. The IP address is a 32-bit binary pattern, which can be represented as four cascaded decimal numbers separated by .: aaa.aaa.aaa.aaa, where each aaa can be anything from 000 to 255, or as four cascaded binary numbers separated by .:
bbbbbbbb.bbbbbbbb.bbbbbbbb.bbbbbbbb, where each b can either be 0 or 1. A network mask is also a 32-bit binary pattern, and consists of consecutive leading 111 1s followed by consecutive trailing 0s, such as 11111111.11111111.11111111.00000000. Therefore sometimes a network mask can also be described simply as x number of leading 1s. When both are represented side by side in their binary forms, all bits in the IP address that correspond to 1s in the network mask become part of the IP network address, and the remaining bits correspond to the host ID. For example, if the IP address for a device is, in its binary form, 11011001.10110000.10010000.00000111, and if its network mask is, 11111111.11111111.11110000.00000000 It means the devices network address is 11011001.10110000.10010000.00000000, and its host ID is, 00000000.00000000.00000000.00000111. This is a convenient and efficient method for access points to route IP packets to their destination. ISP Gateway Address: (see ISP for definition). The ISP Gateway Address is an IP address for the Internet access point located at the ISP's office. ISP: Internet Service Provider. An ISP is a business that provides connectivity to the Internet for individuals and other businesses or organizations. LAN: Local Area Network. A LAN is a group of computers and devices connected together in a relatively small area (such as a house or an office). Your home network is considered a LAN. MAC Address: MAC stands for Media Access Control. A MAC address is the hardware address of a device connected to a network. The MAC address is a unique identifier for a device with an Ethernet interface. It is comprised of two parts: 3 bytes of data that corresponds to the Manufacturer ID (unique for each manufacturer), plus 3 bytes that are often used as the products serial number. NAT: Network Address Translation. This process allows all of the computers on your home network to use one IP address. Using the broadband access points NAT capability, you can access the Internet from any computer on your home network without having to purchase more IP addresses from your ISP. 112 Port: Network Clients (LAN PC) uses port numbers to distinguish one network application/protocol over another. Below is a list of common applications and protocol/port numbers:
Application Protocol Port Number Telnet FTP SMTP POP3 H.323 TCP TCP TCP 23 21 25 TCP 110 TCP 1720 SNMP UCP 161 SNMP Trap UDP 162 HTTP PPTP TCP 80 TCP 1723 PC Anywhere TCP 5631 PC Anywhere UDP 5632 PPPoE: Point-to-Point Protocol over Ethernet. Point-to-Point Protocol is a secure data transmission method originally created for dial-up connections; PPPoE is for Ethernet connections. PPPoE relies on two widely accepted standards, Ethernet and the Point-to-Point Protocol. It is a communications protocol for transmitting information over Ethernet between different manufacturers Protocol: A protocol is a set of rules for interaction agreed upon between multiple parties so that when they interface with each other based on such a protocol, the interpretation of their behavior is well defined and can be made objectively, without confusion or misunderstanding. Access point: A access point is an intelligent network device that forwards packets between different networks based on network layer address information such as IP addresses. 113 Subnet Mask: A subnet mask, which may be a part of the TCP/IP information provided by your ISP, is a set of four numbers (e.g. 255.255.255.0) configured like an IP address. It is used to create IP address numbers used only within a particular network (as opposed to valid IP address numbers recognized by the Internet, which must be assigned by InterNIC). TCP/IP, UDP: Transmission Control Protocol/Internet Protocol (TCP/IP) and Unreliable Datagram Protocol (UDP). TCP/IP is the standard protocol for data transmission over the Internet. Both TCP and UDP are transport layer protocol. TCP performs proper error detection and error recovery, and thus is reliable. UDP on the other hand is not reliable. They both run on top of the IP (Internet Protocol), a network layer protocol. WAN: Wide Area Network. A network that connects computers located in geographically separate areas (e.g. different buildings, cities, countries). The Internet is a wide area network. Web-based management Graphical User Interface (GUI): Many devices support a graphical user interface that is based on the web browser. This means the user can use the familiar Netscape or Microsoft Internet Explorer to Control/configure or monitor the device being managed. 114
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2013-07-11 | 5190 ~ 5230 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
| 2 | 5755 ~ 5795 | DTS - Digital Transmission System |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 2 | Effective |
2013-07-11
|
||||
| 1 2 | Applicant's complete, legal business name |
Hawking Technologies, Inc.
|
||||
| 1 2 | FCC Registration Number (FRN) |
0012065009
|
||||
| 1 2 | Physical Address |
35 Hammond, Suite 150
|
||||
| 1 2 |
Irvine, California 92618
|
|||||
| 1 2 |
United States
|
|||||
| app s | TCB Information | |||||
| 1 2 | TCB Application Email Address |
b******@phoenix-testlab.de
|
||||
| 1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 2 | Grantee Code |
SOY
|
||||
| 1 2 | Equipment Product Code |
HOD45B
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 2 | Name |
A**** T******
|
||||
| 1 2 | Title |
Product Manager
|
||||
| 1 2 | Telephone Number |
949-2********
|
||||
| 1 2 | Fax Number |
949-2********
|
||||
| 1 2 |
a******@hawkingtech.com
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
| 1 2 | DTS - Digital Transmission System | |||||
| 1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Hi-Gain Outdoor Dual-Band Wireless-N Access Point/Bridge | ||||
| 1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 2 | Modular Equipment Type | Does not apply | ||||
| 1 2 | Purpose / Application is for | Original Equipment | ||||
| 1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
| 1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 2 | Grant Comments | Output Power listed is the maximum combined conducted output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. | ||||
| 1 2 | Output Power listed is the maximum combined conducted peak output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz respectively. | |||||
| 1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 2 | Firm Name |
Sporton International Inc.
|
||||
| 1 2 | Name |
A**** C********
|
||||
| 1 2 | Telephone Number |
886-3******** Extension:
|
||||
| 1 2 | Fax Number |
886-3********
|
||||
| 1 2 |
a******@sporton.com.tw
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15E | CC MO | 5180 | 5240 | 0.025 | |||||||||||||||||||||||||||||||||||
| 1 | 2 | 15E | CC MO | 5190 | 5230 | 0.025 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 2 | 1 | 15C | CC MO | 2412 | 2462 | 0.991 | |||||||||||||||||||||||||||||||||||
| 2 | 2 | 15C | CC MO | 2422 | 2452 | 0.971 | |||||||||||||||||||||||||||||||||||
| 2 | 3 | 15C | CC MO | 5745 | 5825 | 0.581 | |||||||||||||||||||||||||||||||||||
| 2 | 4 | 15C | CC MO | 5755 | 5795 | 0.537 | |||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC