FCC ID: 2A62BHT-INDOOR360-3 Indoor 360 Camera 3

Legal and Regulatory Information Legal Considerations This product can be regulated by laws that vary from country to country. Check the laws in your local region before using it. Disclaimer Every care has been taken in the preparation of this document. Please contact us through the following contact information of any inaccuracies or omissions. Prosegur shall not be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Prosegur makes no warranty of any kind with regard to the material contained within this document, limited to, the implied warranties of merchantability and tness for a particular purpose. Prosegur shall not liable or responsible for incidental or consequential damages in connection with the be furnishing, performance or use of this material. This product is only to be used for its intended purpose. including, but not Questo prodotto conforme alle direttive e agli standard di marcatura CE applicabili:

Bassa tensione (LVD) Direttiva 2014/35/UE. Compatibilit elettromagnetica (EMC) Direttiva 2014/30UE. Restrizione sulle sostanze pericolose (RoHS) Direttiva 2011/65/UE e Direttiva delegata (UE) 2015/863. possibile ottenere una copia della dichiarazione originale di conformit da Prosegur. CE-Compatibilit elettromagnetica (EMC) Questa apparecchiatura digitale conforme alla Classe B della certicazione EN 55032. CE-Sicurezza Questo prodotto conforme alle disposizioni IEC/EN/UL 62368-1 o IEC/UL 60950-1 sulla sicurezza delle apparecchiature informatiche. Dichiarazione di conformit CE Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC SDOC Statement can be downloaded from: https://us.dahuasecurity.com/support/notices/. RF exposure warning

(Only for the product has RF communication function) This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Canada Regulatory Compliance Intellectual Property Rights

(Solo per prodotti con trasmettitori / ricevitori RF) ICES-003 Prosegur retains all intellectual property rights relating to technology embodied in the product described in this document. Equipment Modications This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user-serviceable components. Unauthorized equipment changes or modications will invalidate all applicable regulatory certications and approvals. Regulatory Information European Directives Compliance This product complies with the applicable CE marking directives and standards:

Low Voltage (LVD) Directive 2014/35/EU. Electromagnetic Compatibility (EMC) Directive 2014/30/EU. Restrictions of Hazardous Substances (RoHS) Directive 2011/65/EU and its amending Directive (EU) 2015/863. CE-Electromagnetic Compatibility (EMC) This digital equipment is compliant with Class B according to EN 55032. CE-Safety This product complies with IEC/EN/UL 62368-1, Audio/video, information and communication technology equipment Part 1: Safety requirements and IEC/UL 60950-1: Safety of Information Technology Equipment. Declaration of Conformity CE

(Only for the product has RF function) Hereby, Prosegur declares that the radio equipment is compliant with Radio Equipment Directive

(RED) 2014/53/EU. la presente, Prosegur dichiara che Con sulle apparecchiature radio (RED) 2014/53/UE. l'apparecchiatura radio conforme alla Direttiva Declaration of Conformity UKCA This device complies with UKCA relevant directives and standards. Electrical Equipment (Safety) Regulations 2016. Electromagnetic Compatibility Regulations 2016. The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. Hereby, Prosegur declares that the radio equipment is compliant with Radio Equipment Regulations 2017. USA Regulatory Compliance FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. Attention that changes or modication not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonabl e protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. This Class B digital apparatus complies with Canadian ICES -003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. RF exposure warning

(Only for the product has RF communication function) This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Cet quipement doit tre install et utilis une distance minimale de 20 cm entre le radiateur et votre corps. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. The following safety guide is only applicable to products which support 5 GHz Wi-Fi. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation l'intrieur an de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Japan Regulatory Compliance VCCI These products comply with the requirements of VCCI Class B Information Technology Equipment. Batteries Correct disposal of batteries in this product This marking on the battery indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in Directive 2006/66/EC and its amending Directive 2013/56/EU. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. CAUTION Do not ingest battery. Chemical Burn Hazard. This product contains a coin cell battery. If the coin cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. CAUTION Risk of explosion if the battery is replaced by an incorrect type. Do not throw or immerse into water, heat to more than 100C (212F), repair or disassemble, leave in an extremely low air pressure environment or extremely high-temperature environment, crush, puncture, cut or incinerate. Dispose of the battery as required by local ordinances or regulations. Safety The product complies with IEC/UL 60950-1, Information Technology Equipment Safety Part 1:

General Requirements; or complies with information and communication technology equipment Part 1: Safety requirements. If the power supply to the product is from external power adaptor without connecting to AC Mains, and the product is not shipped with power adaptor, customers are required to use the external power adaptor that must fulll the requirements for Safety Extra Low Voltage (SELV) and Limited Power Source (LPS). Waste Electrical and Electronic Equipment (WEEE) statements IEC/EN/UL 62368-1, Audio/video, Disposal and Recycling When this product has reached the end of its useful life, dispose of it according to local laws and regulations. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. In accordance with local legislation, penalties may be applicable for incorrect disposal of this waste. This symbol means that the product shall not be disposed of together with household or commercial waste. Directive 2012/19/EU on waste electrical and electronic equipment (WEEE) is applicable in the European Union member states. To prevent potential harm to human health and the environment, the product must be disposed of in an approved and environmentally safe recycling process. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. Businesses should contact the product supplier for information about how to dispose of this product correctly. 1 2 3 4 Privacy Protection Notice As the device user or possible data controller, you might collect personal data of others such as face, ngerprints, car plate number, Email address, phone number, GPS and so on. You need to be in compliance with the local privacy protection laws and regulations to protect the legitimate rights and interests of other people by implementing measures, including but not limited to: providing clear and visible identication to inform data subject the existence of surveillance area and providing related contact. About the Manual The manual is for reference only. If there is inconsistency between the manual and the actual product, the actual product shall prevail. We are not liable for any loss caused by the operations that do not comply with the manual. The manual would be updated according to the latest laws and regulations of related jurisdictions. For detailed information, refer to the paper manual, CD-ROM, QR code or our ocial website. If there is inconsistency between paper manual and the electronic version, the electronic version shall prevail. All the designs and software are subject to change without prior written notice. The product updates might cause some dierences between the actual product and the manual. Please contact the customer service for the latest program and supplementary documentation. There still might be deviation in technical data, functions and operations description, or errors in print. If there is any doubt or dispute, we reserve the right of nal explanation. Upgrade the reader software or try other mainstream reader software if the manual (in PDF format) cannot be opened. All trademarks, registered trademarks and the company names in the manual are the properties of their respective owners. Please visit our website, contact the supplier or customer service if there is any problem occurring when using the device. If there is any uncertainty or controversy, we reserve the right of nal explanation. Support Should you require any technical assistance, please contact your Prosegur distributor. If your questions cannot be answered immediately, your distributor will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:

Download user documentation and software updates. Search by product, category, or phrase. English Important Safeguards and Warnings This Chapter describes the contents covering proper handling of the device, hazard prevention, and prevention of property damage. Read these contents carefully before using the device, comply with them when using, and keep it well for future reference. Safety Instructions The following categorized signal words with dened meaning might appear in the manual. Signal Words Meaning DANGER WARNING CAUTION TIPS NOTE Indicates a high potential hazard which, if not avoided, will result in death or serious injury. Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury. Indicates a potential risk which, if not avoided, could result in property damage, data lower performance, or loss, unpredictable result. Provides methods to help you solve a problem or save you time. Provides additional supplement to the text. information as the emphasis and Safety Requirement Abide by local electrical safety standards to ensure that the voltage is stable and complies with the power supply requirement of the device. Transport, use, and store the device under the allowed humidity and temperature conditions. Refer to the corresponding technical specications of device for specic working temperature and humidity. Do not place the device in a location exposed to dampness, dust, extreme hot or cold, strong electronic radiation, or unstable lighting condtions. Do not install the device in a place near the heat source, such as radiator, heater, furnace, or other heat generating device to avoid re. Prevent liquid from owing into the device to avoid damge to internal components. Install the device horizontally or install on the stable place to pre vent it from falling. Install the device in a well-ventilated place, and do not block the ventilation of the device. Do not disassemble the device arbitrarily. Avoid heavy stress, violent vibration, and soaking during during transportation, storage, and installation. Complete package is necessary during the transportation. Use the factory package or the equivalent for transportation. Battery Low battery power aects the operation of the RTC, causing it to reset at every power-up. When the battery needs replacing, a log message will appear in the products server report. For more information about the server report, see the products setup pages or contact Prosegur support. Risk of explosion if the battery is incorrectly replaced. Replace only with an identical battery or a battery which is recommended by Imou. Dispose of used batteries according to local regulations or the battery manufacturer's instructions. 5 6

* Label location Fcc warning Indoor 360 Camera 3] ' | Heimgard Technologies HT-INDOOR360-3 2.8mm ay 5V ===1A FC a) ( 4 et MADE IN CHINA

Default username:admin Default password:admin123 FCC ID: 2A62BHT-INDOOR360-3 S/N: 2M0024EPAG34672 FCC Warning Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may cause undesired operation.

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Heimgard Technologies AS Address Grantee Code FCC ID Postbox 1618 VIKA, 0119 Oslo, Norway 2A62B 2A62BHT-INDOOR360-3 Authorized Contact Name Dennis Ho Contact Email Contact Phone dennis.ho@heimgard.com

+47 64 94 44 22 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1)

(2)

(3) labeling the equipment with the exact FCC ID as specified in this application, compliance statement labeling pursuant to the applicable rules, compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date: 2022/09/05 Print Name:

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Dennis Ho QA Manager Applicant Declaration Rev:0.0

Heimgard Technologies AS TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2A62BHT-INDOOR360-3 To whom it may concern:

Date: 2022-09-05 We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Heimgard Technologies AS. This authorization is valid until further written notice from the applicant. Name (Printed): Dennis Ho Title: QA Manager Signature:

On behalf of Company: Heimgard Technologies AS Telephone: +47 64 94 44 22

Hangzhou Huacheng Network Technology Co.,Ltd. Date: 2022-09-05 Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD. 21046 Attention: Equipment Authorization Branch CHANG IN IDENTIFICATION OF EQUIPMENT We, Hangzhou Huacheng Network Technology Co.,Ltd., declare on our sole responsibility that Heimgard Technologies AS may apply Change in FCC Identifier as established in 47CFR 2.933(b) for currently approved devices listed below. FCC ID: 2AVYF-IPC-AX2E-B Regards, Name (Printed): chenhao Zhang Title: Certification Manager Signature:

On behalf of Company: Hangzhou Huacheng Network Technology Co.,Ltd. Telephone: 0571-28822025

Heimgard Technologies AS Federal Communications Comission Date: 2022-09-05 Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD. 21046 Attention: Equipment Authorization Branch CHANG IN IDENTIFICATION OF EQUIPMENT We, Heimgard Technologies AS, request to apply for a new FCC ID as established in 47CFR 2.933(b) for a currently approved device. This application will establish a new FCC ID: 2A62BHT-INDOOR360-3 Per 2.933(b) 1. The original identification is FCC ID: 2AVYF-IPC-AX2E-B. 2. The original grant date is 05/19/2021. 3. The equipment is electrically identical. There is no change in design, circuitry or construction. 4. The original test results are applicable and representative of this changed device. 5. Exterior photographs are included in this application. External photos with label location and type label sample drawing are electronically submitted as attachments. Sincerely, Name (Printed): Dennis Ho Title: QA Manager Signature:

On behalf of Company: Heimgard Technologies AS Telephone: +47 64 94 44 22