Rt35 Kids walkie talkies User's manual dMo el R T 3 5 Precautions This unit conforms to telecommunications management standards, please observe the following rules when using. 1. When Using this machine, you should not cause harmful interference and must accept any received signal. 2. Any operation without permission is illegal, and maybe violet the telecommunications management standards.Such as: change the frequency, change the transmit power, extend the antenna, and so on. 3.This machine cannot be used in a hazardous environment, because it may cause an explosion or fire.The hazardous environment include: gas stations, hospitals, airports, the place without electrical shielding and so on. 4.Do not use soft cloth with detergent or solvent to wipe or clean the machine, use the dry, acid-free soft cloth only. 5.In order to ensure the best voice quality, please keep 5cm distance between your mouth and the machine and use your normal voice intensity. To get a better voice quality, please turn the antenna upward. 6.The battery of this machine has an internal protect function. 1 www.retevis.com Battery Usage The mini walkie-talkie built-in lithium ion battery. The fittings include USB charger that can charge the lithium battery, the charging method is as follows:
1.The charging jack is at the right side of the machine. 2.Connect the USB charger to a standard power socket. 3.Then connect the USB charger to the charging jack or headphone jack. During charging, the battery indicator will be cycle moving. And when charging complete, the cycle moving will be stopped. Preface Welcome to use this mini walkie-talkie, please read this user manual carefully in order to understand all the operating function. Walkie talkie Battery Clip Double connector USB line Users Manual 2 2 2 1 1 www.retevis.com 2 Menu mode LCD instructions indicator name content Channel programming/
clock / volume level CTCSS / DCS programming
/volume Battery power display Hands - free instructions Alarm indication Channel programming / clock / volume level. When the volume level is displayed in the number of standby Press up or down key When the minutes standby, press PPT key to display after the current CTCSS / DCS programming number. Standby display the volume indication press up key or down key. Show the number of cells, the more power the more foot: High power low battery Display when the unit is in the VOX mode of operation. Display when the unit is in the alarm mode of operation. Open the intercom function indication Scanning instructions Display when the unit is in the open mode. When close will not show this icon. Display when the walkie-talkie under scan function. www.retevis.com 218 188 3 ITEM DESCRIPTION Number Name Description 1 2 3 4 5 6 7 8 9 10 11 12 13 Power/Menu Button Long press this button can open / close radio; short press to enter the radio function setting. PTT key Up key Down key Press and hold this button to transmit information quickly press twice to send calling sound. Use this button to adjust volume or function setting choosing. Use this button to adjust volume or function setting choosing. Scan/
Lampe Long press to enter the scanning channel, short press to enter the illumination. Monitor/
Lock button Long press to enter the inter-lock, short press enter monitor function. MIC Built-in microphone. Speaker Antenna USB Interface Earpiece Jack Built-in speaker. Enhanced signal reception and emission. It is a walkie-talkie charging interface. It is a walkie-talkie headset jack. Flashlight It is a walkie-talkie lights. LED It is a walkie-talkie LED. Notice:
This radio come with a dedicated charger, To avoid damage your radio and lithium ion batteries, please do not use other chargers. Please do not transmit when charging. The new battery should be charger around 12hours when use it first time.. www.retevis.com 4 The main features of walkie-talkie 1.A plurality of selectable channels. 2.Automatic squelch. 3.Auto save power. 4.It has an internal voice intercom (speakerphone) function. 5.Having a channel scan function. 6.24-hour time display. 7.Alarm reminders appear. 8.Backlit display. 9.Use BL-5B lithium batteries 5 www.retevis.com Battery low power tips When the unit is low battery in the talk mode and standby mode, power indication start Flashes. Remind you to recharge. Using the walkie-talkies 1.Press and hold the Power / Menu button about 3 seconds, the unit will power on to speak mode, The display shows the icon under intercom mode. 2.Press the Power / Menu button to access the function settings. Activated icon will begin blinking. Press repeatedly this button, explore other menu functions until back to the intercom mode. Every time you press the Power /
Menu button, the function or icon will show on the screen. 3.After activate a function icon, press the up or down key to select menu options. 4.Press PTT-button to save and back to standby. Select channel 1.When the radio is Standby, press the Power / Menu button again until the current channel starts flashing on the LCD screen, you can change the Channel. 2.Press the up or down key to select the channel number. 3.Press the Power / Menu button to save the settings and return to the receiving status. 4.Press the PTT-button to save and return to the receiving status. www.retevis.com 6 CTCSS/DCS Select CTCSS/DCS which allows you to receive calls from members of the same group (same mute code) issued, avoiding the same frequency interference from other users. Note: CTCSS / DCS cannot make your talking content keep secret, it can only make you unable to receive calls from other CTCSS / DCS users. 1.When standby, press the Power / Menu button twice, until the mute code of current channel starts flashing, thus you can reset status of CTCSS/DCS. Press the up key or down key to select the privacy code. Long press the up key or down key to select the privacy code quickly. 2. Press the PTT / CALL to save the settings. Or press the power / menu button to enter next function option. Channel scan Scan fucntion lets you scan all channels occupancy. 1.When standby, press the Scan button to activate scan function, the machine satarts to scan all channel activities), when there are voices in scanned channel, it will stay 4~5s in this channel, then continue to scan next channel.) 2Press theScan button to exit the channel scan. Transmission and reception 1.On receiving status once power on. 7 www.retevis.com 2.Press the PTT key,and use the normal voice to speak, there should be 5 cm between mouth and microphone. 3.After speaking, release the speaking PTT key, the machine is in the receiving status. Adjust the volume This machine has eight adjustable volume. Press the up or down key to adjust the volume when the walkie talkie is under standby. Call Tone This machine has 10 call alerts sound available. Call Tone Setting 1. When Standby, repeatedly press the Power / Menu key to call setting on the LCD screen. 2.Press the up or down key to select a call tone. 3.Press the Power / Menu button to save the settings and then enter other function setting, or press PTT key to save and return to standby. Send call alerts sound 1.When you need to send call alerts, press the PTT key twice quickly, Call alarm will be send automatically. 2.When call alerts sound transmit complete, you can hear a short confirmation sound, the unit will be back to radio standby status. www.retevis.com 8 Hands-free function The machine is equipped with hands-free function, no need to press PTT key , it can automatically send voice. 1.When Standby, repeatedly press the Power / Menu button until the LCD hands-free function label appears. 2.Press the up or down key to switch hands-free on / off function, alternately shows "0,1,2,3"Appears on the display Hands-free indicator .
(0: close hands-free function; 1: noisy environments; 2: Under normal circumstances use: 3: quiet environments) Use earplugs (optional) 1.The walkie-talkie is set to non-hands-free mode. 2.Open the headset/charger jack on the side of the machine. Insert the headset.adjust the microphone position. Automatic power saving feature The machine is equipped with a unique circuit that can extend battery lifeIf you do not receive any signal transmission within 5 seconds, it will automatically switch to energy-saving mode, in this mode, you can still receive the signal) 9 www.retevis.com Automatic squelch The machine has automatic squelch function, provide high-quality voice effects, you can hear more clearly. Backlit display Press any key, the LCD backlight is automatically displayed for five seconds. Set the time The unit has a 24-hour clock function set as follows:
1.Standby, press the Power / Menu button eight times until the hour digits displayed. 2.Press the up or down key to increase or decrease hour digits, time can be set from 0 to 24 hours. 3. Press the power / menu button until the minute digits displayed. 4.Press the up or down key to increase or decrease the minute digits. 5.Press the power / menu button to enter other feature settings or press PTT key to save. Set the alarm 1,Standby, repeatedly press the Power / Menu button until the alarm symbol appears on the LCD screen. Press the up or down key to select turn off or turn on the alarm function. 2.Press the Power / Menu button to enter the set alarm hour time setting. Hours start flashing, press the up key or down key to set alarm hours. Press the Power / Menu button starts blinking minutes, Press up key or down key to set alarm minutes. 3.Press PTT key to save. www.retevis.com 10 Key tone 1.Standby, press the key or down key to select turn on or turn off the key tone.. Power / Menu button seven times press up 2.Press PTT key to save. Channel frenquency USA channel Frequency Channel 1 2 3 4 5 6 Fre quency 462.5625 462.5875 462.6125 462.6375 462.6625 462.6875 Channel 7 8 9 10 11 12 Fre quency 462.7125 467.5625 467.5875 467.6125 467.6375 467.6625 Channel 13 14 15 16 17 18 Fre quency 467.6875 467.7125 462.5500 462.5750 462.6000 462.6250 Channel 19 20 21 22 Fre quency 462.6500 462.6750 462.7000 462.7250 EU channel Frequency Channel 1 2 3 4 Fre quency 446.00625 446.01875 446.03125 446.04375 Channel 5 6 7 8 Fre quency 446.05625 446.06875 446.08125 446.09375 11 www.retevis.com Malfunction and troubleshooting Malfunction No power supply Received signal Poor We cannot change the channel Reception range limited, sound distortion. Troubleshooting 1The battery may be low. 2Use the special charger to charge the battery. 3Battery may be damaged, replacement of the lithium-ion battery. 1Press the up key to increase the volume. 2The received signal may be weak signal, otherwise out of range. 3Check the antenna . For getting the best call quality, make the antenna up. 1When you at channel mode, press the power / menu button until the channel number flashes up on the screen. 2Press the up or down key to change the channel. 3The battery may be low. 1The battery may be low. If indicate low battery, recharge the battery. 2Effective reception range affect by terrain and environmental . 3Check the antenna . For getting the best call quality, make the antenna up. 4the reception range of the car will be seriously affected by Shade trees, the plant building. 6When transmit a signal, keep 5 cm distance between the mouth and the microphone, speak in a normal voice. 7When receiving signal, adjust the volume level. 8The caller should maintain a minimum distance of 3 meterseven father. 9If far away between caller and respondent, obstacle will be affect the signal transmission. If there no obstacle ,communicate range can reach to 3km. www.retevis.com 12 Warning AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliance couldvoidtheuser'sauthoritytooperatetheequipment. SARtestsareconductedusingstandardoperatingpositionsacceptedbytheFCCwiththedevice transmittingatitshighestcertifiedpowerlevelinalltestedfrequencybands,althoughtheSARis determinedatthehighestcertifiedpowerlevel,theactualSARlevelofthedevicewhile operatingcanbewellbelowthemaximumvalue.Beforeanewmodelisaavailableforsaletothe public,itmustbetestedandcertifiedtotheFCCthatitdoesnotexceedtheexposurelimit establishedbytheFCC,Testsforeachproductareperformedinpositionsandlocationsas requiredbytheFCC. Forbodywornoperation,thisdevicehasbeentestedandmeetstheFCCRFexposureguidelines whenusedwithanaccessorydesignatedforthisproductorwhenusedwithanaccessorythat Containsnometal. TomaintaincompliancewiththeFCCsRFexposureguidelines,holdthetransmitterandantenna atleast1inch(2.5centimeters)fromyourfaceandspeakinanormalvoice,withtheantenna pointedupandawayfromtheface. ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforanuncontrolled environment.InordertocomplywiththeFCCRFexposurerequirements,theantenna installationmustcomplywithfollowing:
Usersmustbefullyawareofthehazardsoftheexposureandabletoexercisecontrolovertheir RFexposuretoqualifyforthehigherexposurelimits. Your wireless handheld portable transceiver contains a low power transmitter. This product sendsoutradiofrequency(RF)signalswhenthePushtoTalk(PTT)buttonispressed. Thedeviceisauthorizedtooperateatadutyfactornottoexceed50%. FCC Licensing Information This device operates on GMRS frequencies which require a license from the Federal Communications Commission
(FCC) for business, personal, education and recreational use. To abtain forms, call the FCC forms hotline at:
1-800-418-3676 or go to http://www.fcc.gov. For questions concerning GMRS licensing contact the FCC at 1-888-CALL-FCC (1-888-225-5322). RECYCLED PACKAGING Manufature:
www.retevis.com E-mail: kam@retevis.com Shenzhen Retevis Technology Co.,Ltd