FCC ID: 2A95V-AAC-0101 Smart Care Gateway

User Manual for Smart Hygiene Technology Indicator This user manual will introduce how to use urine detector and indicator. Please read before using and keep this user manual. 1. Introduction Urine Indicator Item Reset Cooling hole Stand Speaker Power Button Indicator Charge Jack 2. How to Use 2.1 Urine Indicator 2.1.1 Power button Description If indicator is not working normally, please press the reset button Cooling hole Stand Speaker Power on/off, adjust brightness, enter pairing mode, mute White: stand by; Green: dry. Red: Wet and need to change Please use micro-USB cable for charging Press the button for 2 seconds to power on the device. The light will turn on. When, keep pressing for 3 seconds more, it will enter pairing mode for pairing urine detector. 2.1.2 Low battery This user manual is developed for the cooperation on smart diaper project with Henkel The internal rechargeable battery can only work for 3-5 hours. When the battery exhausted, the device will shut off automatically. Plug in USB cable with the charger. It will charge the battery automatically. The cable plugged-in all the time for in house use is recommended. 2.1.3 Brightness Press and hold the power button will dim the brightness while the device is in the working mode. To brighten the brightness after dim, just press and hold the power button again. 2.1.4 Mute (including wetness alarm, and sleep posture alarm) Press the power button once to mute, but it will alarm again if it happens again 2.1.5 Color of urine indicator The color will change according to the amount of the urine. This user manual is developed for the cooperation on smart diaper project with Henkel 4. Product Specification Item Size Weight (battery included) Battery Transmission Distance Frequency Operating Temperature Storage Temperature Urine Indicator R 70 * H 70 mm Around 80 g Lithium Polymer Rechargeable BLE 4.0: Bluetooth Low Energy 15 meters 2.4 GHz 10 C 40 C 0 C 50 C Wi-Fi 10-20 meters 2402MHZ-2480MHZ 10 C 40 C 0 C 50 C This user manual is developed for the cooperation on smart diaper project with Henkel FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

< Henkel Malaysia Sdn Bhd >

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID:2A95V-AAC-0101 To Whom It May Concern, C5266091_X10_Ed.1 Date: 2022-12-30 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Poonlarp Ngernmaneerat Title: N/A 1/1

C5266091_X8_Ed.1 Letter of Authorization

<Henkel Malaysia Sdn Bhd >

Company:Henkel Malaysia Sdn Bhd Address:Unit2.01,2.02,Level 2, Mercu 3, Jalan Bangsar, KL Eco City, Kuala Lumpur, 59200, MALAYSIA Product Name: Smart Care Gateway Model Number: AAC-0101 FCC Identifier:2A95V-AAC-0101 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del information Carme, s/n, 08193 Bellaterra, Spain, related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. is allowed to forward all Name: Poonlarp Ngernmaneerat Date: 2022-12-30 Title: N/A Signature of applicant:

1/1