Operating Manual WAP3212-001-001 / RD-FA2066-01 Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX TP Operating Manual WAP3212-001-001 / RD-FA2066-01 Document-No C-DOC-AAC528 Issue 04 Date 10.04.2015 Title Operation Manual: Cabin Wireless Access Point, Dual Radio Equipment Designation Type / model No. WAP3212-001 Part Number(s) WAP3212-001-001 (PAC P/N: RD-FA2066-01) Reference Specification CSE-23-14-0012 (PAC ASC-FA2066-01) Lufthansa Technik AG proprietary rights are included in the information disclosed herein. Recipient by accepting this document agrees that neither this document nor the information disclosed herein nor any part thereof shall be reproduced or transferred to other documents or used or disclosed to others for any purpose unless specifically authorized in writing by Lufthansa Technik AG. Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX TP Operating Manual WAP3212-001-001 / RD-FA2066-01 Revision History Issue. No Reason IR 01 02 03 04 Initial Issue Adaption to WAP3212-001-001
(1.1) Added english/french regulatory statement
(4.1) Added statements for regulatory limitations
(4.3) Added statements for user information
(1.1) Comliance Statement: Outdoor Antenna usage deleted. Issue Date 11.03.2014 02.02.2015 13.03.2015 31.03.2015 10.04.2015 Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX RH 1 Operating Manual WAP3212-001-001 / RD-FA2066-01 Table of Content 1. 2. 3. 1.1. 1.2. 1.3. 2.1. 2.2. 2.3. 2.4. Introduction ........................................................................................................................................ 1 Compliance Statement ............................................................................................................. 1 About the WAP ......................................................................................................................... 2 About this document ................................................................................................................. 4 Setup ................................................................................................................................................... 5 Connector Interface .................................................................................................................. 5 Discrete Inputs ......................................................................................................................... 6 ID Strapping ............................................................................................................................. 7 Powering the WAP ................................................................................................................... 7 System Integration ............................................................................................................................. 9 Minimal Setup .......................................................................................................................... 9 Conguration ............................................................................................................................ 9 Time Synchonization ................................................................................................................ 9 Logging .................................................................................................................................. 10 Software Updates ................................................................................................................... 10 Programming Interfaces ......................................................................................................... 10 Controller Command Line Interface ........................................................................................ 10 Controller SNMP Interface ...................................................................................................... 11 Radio SNMP Interface ............................................................................................................ 11 Regulatory Information .................................................................................................................... 12 Allowed Usage of Channels .................................................................................................... 12 Conformity .............................................................................................................................. 12 User Information ..................................................................................................................... 12 Appendix A .................................................................................................................................................... 13 3.1. 3.2. 3.3. 3.4. 3.5. 3.6. 4.1. 4.2. 4.3. 3.7. 3.8. 3.6.1. 4. Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page TOC 1 Operating Manual WAP3212-001-001 / RD-FA2066-01 List of Figures Figure 1-1:
Figure 1-2:
Figure 1-3:
Figure 2-1:
Figure 2-2:
Isometric Drawing of the Wireless Access Point ........................................................................ 2 Outline Dimension Drawing of the Wireless Access Point ......................................................... 3 Connector Locations................................................................................................................. 3 Pinning of WAP connectors ...................................................................................................... 5 LED indications ........................................................................................................................ 7 Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page LOF 1 Operating Manual WAP3212-001-001 / RD-FA2066-01 List of Tables Table 1 Strapping Congurations ...................................................................................................................... 6 Table 2: LED Indications of the WAP ................................................................................................................. 8 Table 3: Required DHCP options ...................................................................................................................... 9 Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page LOT 1 Operating Manual WAP3212-001-001 / RD-FA2066-01 1. Introduction This document provides information for installation and integration of the Wireless Access Point P/N WAP3212-
001-001:C1008 (RD-FA2066-01) referred to as the WAP in this manual. The WAP is designed and manufactured in accordance with all requirements for installation in aircraft cabins. 1.1. Compliance Statement English:
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body The use of any antenna other than those certified with the product is expressly forbidden by FCC rules 47 CFR part 15.204 and IC RSS standards. Franais:
Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Cet appareil et son antenne (s) ne doit pas tre co-localiss ou fonctionnant en conjonction avec une autre antenne ou transmetteur. Cet quipement doit tre install et utilis une distance minimale de 20cm entre le radiateur et votre corps. L'utilisation d'une antenne autre que ceux qui sont certifis avec le produit est expressment interdite par la rglementation FCC partie 47 CFR 15.204 et IC normes RSS. Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page 1 QTP C-DOC-AAC528 Operation Manual: Cabin Wireless Access Point, Dual Radio 1.2. About the WAP The WAP is a high-performance IEEE 802.11 based wireless access point with an ARINC 628 housing for WLAN installations on aircraft. The radio module is provided by Aruba Networks and allows IEEE 802.11ac communication in addition to IEEE 802.11a/b/g/n. The WAP has 6 integrated antennas covered by a protective radome allowing 3x3 MIMO for both the 2.4GHz and the 5GHz band (see gure 1). Figure 1-1:
Isometric Drawing of the Wireless Access Point Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page 2 QTP C-DOC-AAC528 Operation Manual: Cabin Wireless Access Point, Dual Radio Figure 1-2:
Outline Dimension Drawing of the Wireless Access Point Figure 1-3:
Connector Locations Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page 3 QTP C-DOC-AAC528 Operation Manual: Cabin Wireless Access Point, Dual Radio 1.3. About this document This document shall provide the information necessary to operate one or more WAPs in a lab environment as well as on an aircraft. This includes the mechanical, electrical and the software aspectects. Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page 4 QTP C-DOC-AAC528 Operation Manual: Cabin Wireless Access Point, Dual Radio 2. Setup 2.1. Connector Interface Figure 2-1:
Pinning of WAP connectors Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page 5 QTP C-DOC-AAC528 Operation Manual: Cabin Wireless Access Point, Dual Radio 2.2. Discrete Inputs The WAP has following discrete inputs:
Power enable DISCRETE IN POWER ENABLEAllow wireless or wired meshing of several CWAP for content mirroring and house keeping in terms of active radio management and roaming. Cong IP STRAP 3 IP STRAP 2 IP STRAP 1 IP STRAP 0 A B C D E F G H I J K L M N O DHCP ground ground ground ground ground ground ground ground open open open open open open open open ground ground ground ground open open open open ground ground ground ground open open open open ground ground open open ground ground open open ground ground open open ground ground open open ground open ground open ground open ground open ground open ground open ground open ground open Table 1: Strapping Congurations
RF enable DISCRETE IN RF ENABLE To enable the WAP the DISCRETE IN POWER ENABLE needs to be connected to DISCRETE GND. To release the radio module from hardware lock the DISCRETE IN RF ENABLE needs to be connected to DIS-
CRETE GND as well. Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page 6 QTP C-DOC-AAC528 Operation Manual: Cabin Wireless Access Point, Dual Radio 2.3. ID Strapping The WAP has four designated discrete inputs used as strapping pins to specify its position in the aircraft. The WAP applies the conguration parameters according to this strapping status. It is recommended for testing to use conguration A (see table 1) for a single WAP or A, B, C, and so forth for multiple WAPs. Full DHCP congration is limited until software version SWWAP-001-012.
<IPADDR_A>192.168.10.11</IPADDR_A>
<NETWORK_A>192.168.10.255</NETWORK_A>
<NETMASK_A>255.255.255.0</NETMASK_A>
<GATEWAY_A>192.168.10.1</GATEWAY_A>
<ARUBA_PHYSICAL_IPADDR_A>192.168.10.31</ARUBA_PHYSICAL_IPADDR_A>
<ARUBA_PHYSICAL_NETWORK_A>192.168.10.255</ARUBA_PHYSICAL_NETWORK_A>
<ARUBA_PHYSICAL_NETMASK_A>255.255.255.0</ARUBA_PHYSICAL_NETMASK_A>
<ARUBA_PHYSICAL_GATEWAY_A>192.168.10.1</ARUBA_PHYSICAL_GATEWAY_A>
<ACHANNEL_A>44</ACHANNEL_A>
<ATXPOWER_A>3</ATXPOWER_A>
<GCHANNEL_A>11</GCHANNEL_A>
<GTXPOWER_A>3</GTXPOWER_A>
2.4. Powering the WAP The WAP will start the controller board as soon as the WAP is powered and the power discrete is connected to ground. During booting the WAPs status LED is blue after booting is nished the status LED turns green. Figure 2-2:
LED indications Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page 7 QTP C-DOC-AAC528 Operation Manual: Cabin Wireless Access Point, Dual Radio Caption PWR PWR PWR PWR PWR 5 5 2.4 2.4 ETH2 ETH2 ETH2 ETH1 ETH1 ETH1 Indication dark violet constant blue constant green constant yellow blinking dark amber dark amber dark amber constant amber blinking dark amber constant amber blinking Meaning Controller board not powered Not booting, Maintenance mode Booting (will be switched on 10 seconds after power is applied) Controller board ready, BITE ok BITE error 5GHz radio module off constant 5GHz radio module on 2.4GHz radio module off 2.4GHz radio module on Ethernet port 2 not connected Ethernet port 2 link established Ethernet port 2 link established, transmission in progress Ethernet port 1 not connected Ethernet port 1 link established Ethernet port 1 link established, transmission in progress Table 2: LED Indications of the WAP Please note that it may take up to 10 seconds until the unit lights up the LED and starts booting after applying power and enable the DISCRETE IN POWER ENABLE. The radio board is powered by the controller board as soon as the controller board itself is powered and the RF discrete is connected to ground. Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page 8 QTP C-DOC-AAC528 Operation Manual: Cabin Wireless Access Point, Dual Radio 3. System Integration 3.1. Minimal Setup The following section describes the operation of one or more WAPs along with a conguration and logging server. Note that a bootable USB sticks referred to as SWWAP13-xxx-xxx: Service host for WAP3212-xxx-
xxx exists that provides all required servers. The WAP expects a DHCP server in the network to provide a temporary IP address. The WAP also explicitely queries DHCP options 56 and 67 (see table 3 for content) and will continue cong-
uration and software load using the values provided by the server. If an IP adress is provided but options are not provided by the DHCP the WAP continues booting and uses the software and conguration stored in the local memory. It replaces the temporary IP address by the one specied in the conguration. The TFTP server shall contain the full software release in the server root directory. Option 67 56 Content index.txt IP address Meaning Name of index le referencing all software parts TFTP servers address in the network Table 3: Required DHCP options 3.2. Conguration Within the TFTP root directory two les might be changed during testing:
system_configuration.xml aruba_configuration.cfg The name parameter in the aruba_configuration.cfg shall be used to identify the conguration. WAP software before version SWWAP-001-013 will not apply a changed conguration if the running conguration and the uploaded conguration have the same name parameter. Aruba credentials in both conguration les must be in accordance. After any change of these conguration les, the MD5 checksum les must be regenerated for the WAP. 3.3. Time Synchonization The WAP does not have a buffered real-time clock included. It therefore depends on an external time source in order to write logs with correct timestamps and to keep the correct amount of log data in its internal memory. During each startup the WAP tries to connect to an external NTP time server and to synchronize the internal clock with it. The NTP time server address is specied in the system conguration le in the parameter NTP_SERVER_IP.
<NTP_SERVER_IP>192.168.10.1</NTP_SERVER_IP>
Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page 9 QTP C-DOC-AAC528 Operation Manual: Cabin Wireless Access Point, Dual Radio 3.4. Logging The WAP can send log data to a server using the RFC 5424 syslog protocol. Logging can be congured using the following parameters:
<USE_REMOTE_SYSLOG_SERVER>1</USE_REMOTE_SYSLOG_SERVER>
<SYSLOG_SERVER_IP>192.168.10.1</SYSLOG_SERVER_IP>
<SYSLOG_SERVER_PORT>514</SYSLOG_SERVER_PORT>
<SYSLOG_LOG_LEVEL>5</SYSLOG_LOG_LEVEL>
3.5. Software Updates Software updates (and downgrades) are provided during boot time by an external TFTP server. The WAP checks if the les provided by the TFTP are different from those installed. If so, they are applied automatically. Up to 5 minutes of boot time need to be given in case of an update. 3.6. Programming Interfaces Controller Command Line Interface 3.6.1.
restart restarts the WAP
versions shows all software part numbers currently installed
bite shows logs from the built-in test equipment process
leds shows all LEDs current status
ssids Lists all congured SSIDs along with their status, 0 for disabled, 1 for enabled Example output: passengers,0,crew,1,maintenance,1
ssid [enable|disable] SSIDNAME enables or disables Example usage: ssid enable Entertainment
serialnumber shows the serial number of the LRU
partnumber shows the part number of the LRU
modifications shows all hardware modications implemented (+ means implemented - not implemented, 0 not labelled) Example output: +++
radioserialnumber shows the radio board serial number or N/A if the radio is not booted
radiomodel shows the radio board model Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page 10 QTP C-DOC-AAC528 Operation Manual: Cabin Wireless Access Point, Dual Radio
temperatures shows all temperatures in Celsius (high temperature zone; low temperature zone; power supply zone) Exmaple output: 67;65;55
voltages shows the 12 V current and all voltages in Volt (12VC, 12V, 5V, 3.3, 1.8, 1.5, 1.1, Example:
0.920;11.880;5.00;3.360;1.860;1.520;1.110)
timestamp shows the current Unix timestamp
radiouptime shows the radio uptime or N/A if the radio is not booted
discretes shows all current discretes status in the following order (din poweron, din rfon, din reset, din congw1, dout power, dout rf, dout congw2 Example output: on;on;off;off;off;on;off)
loadavg shows the controller CPU load averafe in standard Unix output
clientsconnected shows the number of clients connected to the access point or N/A if the radio is not booted 3.7. Controller SNMP Interface The controller board provides an SNMP interface that allows receiving status information. Refer to the MIB le provided to you or as printed in this appendix A. 3.8. Radio SNMP Interface The radio board provides an SNMP interface that allows receiving status information. The interface does not permit to make changes to the conguration. Refer to the MIB guides provided by Aruba. Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page 11 QTP C-DOC-AAC528 Operation Manual: Cabin Wireless Access Point, Dual Radio 4. Regulatory Information 4.1. Allowed Usage of Channels The usage of channels and power levels is generally restricted by law depending on the region of operation. The WAP3212-00x-00x (RD-FA2066-01) has been designed in compliance with governmental requirements, so that only authorized network administrators can change the settings by specific configuration files after introduction and authorization by Lufthansa Technik TX-OE. Access points are radio transmission devices and as such are subject to governmental regulation. Network administrators responsible for the configuration and operation of access points must comply with local broadcast regulations. Specifically, access points must use channel assignments appropriate to the location in which the access point will be used. Channel assignments can be performed only by trained maintanance personnel via controlled configuration files, released by Lufthansa Technik TX-OE. 4.2. Conformity The WAP conforms with RTCA DO-160G. See the Certicate of Conformity (C-ABS566-EQ) and the Compliance Statement (C-ABS567-EQ) for specic information on operation in Europe regulatory domain. 4.3. User Information Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page 12 QTP C-DOC-AAC528 Operation Manual: Cabin Wireless Access Point, Dual Radio Appendix A SNMP Management Information Base
-- ****************************************************************************
--
-- Lufthansa Technik Wireless Access Point
-- Information Base for SNMP Network Management
--
--
--
-- The Lufthansa Technik Enterprise number is 28833.
-- The ASN.1 prefix to, and including the Lufthansa Technik Enterprise is:
-- 1.3.6.1.4.1.28833
--
-- ****************************************************************************
LHTWAP-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises FROM RFC1155-SMI sysDescr FROM RFC1213-MIB;
lufthansaTechnik OBJECT IDENTIFIER ::= { enterprises 28833 }
communication OBJECT IDENTIFIER ::= { lufthansaTechnik 1 }
hardware OBJECT IDENTIFIER ::= { communication 1 }
wap OBJECT IDENTIFIER ::= { hardware 2 }
identification OBJECT IDENTIFIER ::= { wap 1 }
status OBJECT IDENTIFIER ::= { wap 2 }
notification OBJECT IDENTIFIER ::= { wap 3 }
-- ****************************************************************************
-- MAR Array MIB Revision
-- ======================
--
-- The Lufthansa Technik enterprise (1.3.6.1.4.1.28833)
-- communication Group (1.3.6.1.4.1.28833.1)
-- hardware Group (1.3.6.1.4.1.28833.1.1)
-- wap Group (1.3.6.1.4.1.28833.1.1.2)
-- identification Group (1.3.6.1.4.1.28833.1.1.2.1)
-- status Group (1.3.6.1.4.1.28833.1.1.2.2)
--
-- ****************************************************************************
partNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION
"Part Number of the WAP Unit."
::= { identification 1 }
serialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION
"Serial Number of the WAP Unit."
::= { identification 2 }
bootloaderVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page 13 QTP C-DOC-AAC528 Operation Manual: Cabin Wireless Access Point, Dual Radio ACCESS read-only STATUS mandatory DESCRIPTION
"Software bootloader Partnumber of the WAP Unit."
::= { identification 3 }
kernelVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION
"Software kernel Partnumber of the WAP Unit."
::= { identification 4 }
filesystemVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION
"Software file system Partnumber of the WAP Unit."
::= { identification 5 }
modificationsImplemented OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION
"modifications implemented for the WAP Unit."
::= { identification 6 }
arubaMACaddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION
"aruba mac address associated with WAP Unit."
::= { identification 7 }
arubaName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION
"aruba name associated with WAP Unit."
::= { identification 8 }
arubaSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION
"aruba serial number associated with WAP Unit."
::= { identification 9 }
arubaModel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION
"aruba model associated with WAP Unit."
::= { identification 10 }
arubaConfig OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page 14 QTP C-DOC-AAC528 Operation Manual: Cabin Wireless Access Point, Dual Radio ACCESS read-only STATUS mandatory DESCRIPTION
"aruba running configuration associated with WAP Unit."
::= { identification 11 }
SystemConfigVerion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION
"System Configuration file version associated with WAP Unit."
::= { identification 12 }
temperatureHighPCB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"high controller board temperature of the WAP Unit."
::= { status 1 }
temperatureLowPCB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"low controller board temperature of the WAP Unit."
::= { status 2 }
temperaturePowrSupply OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"power board temperature of the WAP Unit."
::= { status 3 }
voltage12V OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"12V adc measurement of the WAP Unit."
::= { status 4 }
current12V OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"12V corresponding current measurement of the WAP Unit."
::= { status 5 }
voltage5V OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"5V adc measurement of the WAP Unit."
::= { status 6 }
voltage3V3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page 15 QTP C-DOC-AAC528 Operation Manual: Cabin Wireless Access Point, Dual Radio ACCESS read-only STATUS mandatory DESCRIPTION
"3.3V adc measurement of the WAP Unit."
::= { status 7 }
voltage1V5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"1.5V adc measurement of the WAP Unit."
::= { status 8 }
voltage1V8 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"1.8V adc measurement of the WAP Unit."
::= { status 9 }
voltage1V1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"1.1V adc measurement of the WAP Unit."
::= { status 10 }
voltageProcessor OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"processor voltage adc measurement of the WAP Unit."
::= { status 11 }
timeStamp OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"Current date and time of the WAP Unit."
::= { status 12 }
uptimeWAP OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"uptime of the WAP Unit."
::= { status 13 }
DiscreteInRF OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"Discrete Input RF status of the WAP Unit."
::= { status 14 }
DiscreteInPOff OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page 16 QTP C-DOC-AAC528 Operation Manual: Cabin Wireless Access Point, Dual Radio ACCESS read-only STATUS mandatory DESCRIPTION
"Discrete Input Power OFF status of the WAP Unit."
::= { status 15 }
DiscreteInRST OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"reset discrete input status of the WAP Unit."
::= { status 16 }
DiscreteInConfigW1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"Discrete Config W1 input status of the WAP Unit."
::= { status 17 }
DiscreteOutRF OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DiscreteOutPower OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"Discrete Power Output status of the WAP Unit."
::= { status 19 }
DiscreteOutConfigW2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"Discrete ConfigW2 Output status of the WAP Unit."
::= { status 20 }
loadaverageARM OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"ARM CPU load average of the WAP Unit."
::= { status 21 }
totalHrsOfOperation OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION
"total hrs of operation of WAP Unit."
::= { status 22 }
wapEventNotification NOTIFICATION-TYPE STATUS current DESCRIPTION
"this trap is sent by WAP AM335x."
::= { notification 1 }
Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page 17 QTP C-DOC-AAC528 Operation Manual: Cabin Wireless Access Point, Dual Radio wapEventString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION
"trap notification reason."
::= { notification 2 }
END Date 10.04.2015 04 Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page. LHT Form (HAM TX) Printed in the Federal Republic of Germany LHT Innovation HAM TX Page 18