ARBT0200 BLE Beacon User Manual

 

Aruba LS-BT20 Location Beacon Installation Guide About the LS-BT20 Location Beacon The LS-BT20 location beacon is designed to provide real-time location and proximity engagement with the Meridian Mobile Engagement tools. The key features are:

Highly-accurate location identification Stand-alone device to protect user privacy Low power consumption Easy to deploy, test, and use Package Contents LS-BT20 location beacon Four adhesive pads Installation Guide (this document, printed) LS-BT20 Overview The following figure shows the front and back view of an LS-BT20 location beacon:

Figure 1 LS-BT20 Front and Back View Model: ARBT0200 Model: ARBT0200 FCC ID Q9DARBT0200 IC: 4675A-ARBT0200 Rectangular Tab: on the left of the device, used for detaching the bottom cover. Grooves: on the bottom of the device at the four corners, used for attaching adhesive pads. Mylar Tab: extends out from the bottom of the device, pulled out for activating batteries. The LS-BT20 location beacon is referred to as device in rest of the document. Activation The device is powered using two CR2477 coin batteries. To activate the device, pull out the tab that extends out from the bottom of the device. Installation The device ships with adhesive pads to install the device on a flat surface in an indoor environment. Optional accessory kits are available that allow you to mount the device in an indoor and outdoor environment. For more information about the indoor and outdoor mounting kits, contact your Aruba sales representative. Installation using the Adhesive Pads The four corner grooves on the bottom of the device can be used to attach the device on a flat surface. Before installing the device, ensure that:

the mounting surface is indoor, flat, clean, and dust-free. It is recommended to clean the surface using a solvent with a 50/50 Isopropyl Alcohol and water mixture. the grooves for adhesive pads on the bottom of the device is dust-free. the device is activated. Installation Steps 1. Attach the adhesive pads provided in the package onto the four grooves at the bottom of the device, as shown in Figure 2. Figure 2 Attaching the Adhesive Pads 5. Attach the bottom cover, as shown in Figure 6. Figure 6 Attaching the Bottom Cover Configuring/Provisioning LS-BT20 Devices The LS-BT20 devices are configured or provisioned using the Aruba Beacons app. For more informations, see http://docs.meridianapps.com/developers/beacons_app Product Specifications Physical Device dimensions (HxWxL): 16 mm x 47 mm x 47 mm Electrical Power Supply: Two CR2477 coin batteries Coin battery capacity: 2000 mAh Voltage: 3 V RF Performance Tx = -23 dBm to 0 dBm (23 dB dynamic range) Rx sensitivity = Approximately -94 dBm (1 Mbps) Working Frequency range: 2450 50 MHz Operation temperature: 0 C to 50 C RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits. This equipment should be installed and operated with a minimum distance of 7.9 inches (20 cm) between the radiator and your body for 2.4 GHz operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Safety and Regulatory Compliance Aruba Networks provides a multi-language document that contains country-specific restrictions and additional safety and regulatory information for all Aruba devices. Regulatory Model Names The regulatory model name for the LS-BT20 is ARBT0200. For complete regulatory model information, refer to the label located on the back panel of this device. Figure 7 Regulatory Label Placement for the LS-BT20 2. Peel off the protective film on the adhesive, and attach the device onto the desired flat surface. Battery Replacement Battery replacement is required to maximize the lifespan of this device. To replace the batteries, follow the steps below in the order they are listed. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. 1. Insert a flat head screwdriver in the rectangular tab on the right side of the device, as show in Figure 3. 2. Push the tab downwards to detach the bottom cover from the device. Figure 3 Tab to Detach the Bottom Cover 3. Lift the batteries from their slots using a non-metallic flat head screwdriver, as shown in Figure 4. Figure 4 Removing the Battery 4. Snap the new batteries into the slots, as shown in Figure 5. Figure 5 Replacing the Battery

. FCC Class B Part 15 This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturers instructions, may cause interference harmful to radio communications. If this equipment does cause interference, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or TV technician for help. Canada Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

This device may not cause interference This device must accept any interference, including interference that may cause undesired operation of the device. Complies with the Class B limits for radio noise emissions as set out in the interference-causing equipment standard entitled Digital Apparatus, ICES-

003 of Industry Canada. Cet apareil numerique de la classe B respecte toutes les exigencies du Reglement sur le materiel brouilleur du Canada.

!

Changes or modifications to this unit that are not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. EU Regulatory Conformance This product is CE marked according to the provisions of the R &

TTE Directive (1999/5/EC) - CE. Aruba Networks Inc., hereby declares that the ARBT0100 device model is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC -CE The Declaration of Conformity made under Directive 1999/5/EC is available for viewing at the following location: http://support.arubanetworks.com European Union RoHS Aruba products also comply with the EU Restriction of Hazardous Substances Directive 2011/65/EC (RoHS). EU RoHS restricts the use of specific hazardous materials in the manufacture of electrical and electronic equipment. Specifically, restricted materials under the RoHS Directive are Lead (including Solder used in printed circuit assemblies), Cadmium, Mercury, Hexavalent Chromium, and Bromine. Some Aruba products are subject to the exemptions listed in RoHS Directive Annex 7 (Lead in solder used in printed circuit assemblies). Products and packaging will be marked with the RoHS label shown at the left indicating conformance to this Directive. Japan China RoHS 10 Aruba products also comply with China environmental declaration requirements and are labeled with the EFUP 10 label shown at the left. ?

Hazardous Materials Declaration

(Hazardous Substance)

(Parts)

(PCA Boards)

(Mechanical Sub-Assemblies)

SJ/T11363-2006

Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the relevant threshold of the SJ/T11363-2006 standard.

Indicates that the concentration of the hazardous substance of at least one of all homogeneous materials in the parts is above the relevant threshold of the SJ/T11363-2006 standard.

This table shows where these substances may be found in the supply chain of electronic information products, as of the date of sale of the enclosed product.

The Environment- Friendly Use Period (EFUP) for all enclosed products and their parts are per the symbol shown here. The Environment- Friendly Use Period is valid only when the product is operated under the conditions defined in the product manual. Proper Disposal of Aruba Equipment Waste of Electrical and Electronic Equipment Aruba products at end of life are subject to separate collection and treatment in the EU Member States, Norway, and Switzerland and therefore are marked with the symbol shown at the left (crossed-out wheelie bin). The treatment applied at end of life of these products in these countries shall comply with the applicable national laws of countries implementing Directive 2002/96EC on Waste of Electrical and Electronic Equipment (WEEE). Aruba LS-BT20 Location Beacon Installation Guide a Hewlett Packard Enterprise company Contacting Support Main Site Support Site arubanetworks.com support.arubanetworks.com Airheads Social Forums and Knowledge Base community.arubanetworks.com North American Telephone International Telephones Software Licensing Site End of Support information Security Incident Response Team (SIRT) Support Email Addresses Americas, APAC, and EMEA 1-800-943-4526 (Toll Free) 1-408-754-1200 http://www.arubanetworks.com/

support-services/support-

program/contact-support licensing.arubanetworks.com http://www.arubanetworks.com/

support-services/end-of-life-

products/end-of-life-policy/

http://www.arubanetworks.com/

support-services/security-

bulletins/

support@arubanetworks.com Security Incident Response Team (SIRT) sirt@arubanetworks.com Copyright Copyright 2016 Hewlett Packard Enterprise Development LP Open Source Code Certain Aruba products include Open Source software code developed by third parties, including software code subject to the GNU General Public License ("GPL"), GNU Lesser General Public License ("LGPL"), or other Open Source Licenses. The Open Source code used can be found at this site:

http://www.arubanetworks.com/open_source Warranty This hardware product is protected by an Aruba warranty. For details, see the Safety, Compliance, and Warranty Information Guide included with this device. a Hewlett Packard Enterprise company www.arubanetworks.com 1344 Crossman Avenue Sunnyvale, California 94089 Phone: 408.227.4500 Fax 408.227.4550 Aruba LS-BT20 Location Beacon | Installation Guide Part Number 0511880-01 | March 2016