FCC ID: Q9DAPIN0228 Wireless Access Point

ARUBA 228 ACCESS POINT 802.11ac for rugged indoor locations Rugged indoor Aruba 228 wireless APs deliver gigabit Wi-Fi performance to 802.11ac mobile devices in harsh indoor environments such as warehouses and stadiums With a maximum data rate of 1.3 Gbps in the 5-GHz band and 600 Mbps in the 2.4-GHz band, 220 series APs are three-times faster than 802.11n APs and provide performance similar to a wired connection. The 228 APs include ClientMatch t echnology, which eliminates sticky clients by continuously gathering session performance metrics from mobile devices. This information is then used to steer each mobile device to the best AP and radio on the WLAN. Proactive and deterministic, ClientMatch dynamically optimizes Wi-Fi client performance as users roam and RF conditions change. If a mobile device moves out of range of an AP or RF interference impedes performance, ClientMatch automatically steers it to a better AP. With ClientMatch, 228 APs load web pages faster, deliver video streams with improved quality and support high densities of mobile devices. An 802.11ac network without ClientMatch performs no different than an 802.11n WLAN. The 228 APs additionally support priority handling and policy enforcement for individual Microsoft Lync media on the same device, including encrypted videoconferencing, voice, chat and desktop sharing. UniqUe benefits Industrial design for rugged indoor environments

- Extends temperature range for indoor environments that lack heating and cooling

- Connectorized antenna ports support high gain large public venue antennas

- Designed for enhanced physical security Delivers 1.9 Gbps aggregate throughput.

- EtherChannel link aggregation on two Gigabit Ethernet ports provides 1.9 Gbps throughput. 600 Mbps in the 2.4-GHz band.

- Supports up to 600 Mbps for TurboQAM-enabled mobile devices operating in the 2.4-GHz band an industry first. Best-in-class RF management

- Integrated Adaptive Radio Management technology manages the 2.4-GHz and 5-GHz radio bands and ensures that APs stay clear of RF interference. Spectrum analysis

- Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference. Wireless mesh

-Wireless mesh connections are convenient where Ethernet drops are not available. Security

- Integrated wireless intrusion protection offers threat protection and mitigation and eliminates the need for separate RF sensors and security appliances.

- With an OpenDNS service subscription, Aruba Instant APs delivers integrated web filtering, malware and botnet protection to every device connected to the WLAN.

- Encrypted IPsec VPN tunnels securely connect remote users to corporate network resources.

- Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys.

- SecureJack-capable for secure tunneling of wired Ethernet traffic. data sheet Choose yoUr operating mode The 228 APs offer a choice of operating modes to meet your unique management and deployment requirements. Controller-managed AP or Remote AP (RAP) running ArubaOS. When managed by Aruba Mobility Controllers, 228 APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding. Aruba Instant AP running InstantOS. In Aruba Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up one Instant AP, configure it over the air, and plug in the other APs the entire process takes about five minutes. Spectrum analysis identifies sources of RF interference Air monitor provides wireless intrusion protection Hybrid AP serves Wi-Fi clients and provides wireless intrusion protection and spectrum analysis Secure enterprise mesh For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, Instant APs are factory-

shipped to any site and configure themselves when powered up. If WLAN and network requirements change, a built-in migration path allows 228 Instant APs to become part of a WLAN that is centrally managed by a Mobility Controller. AP-228 SPECIFICATIONS

- 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3x3 MIMO and six external antenna connectors. Wireless radio speCifiCations AP type: Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n

- In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation. This gives TurboQAM-enabled clients a 33%

boost above the maximum supported data rate. Software-configurable dual radio supports 5 GHz and 2.4 GHz 3x3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate Supported frequency bands (country-specific restrictions apply):

- 2.4000 GHz to 2.4835 GHz

- 5.150 GHz to 5.250 GHz

- 5.250 GHz to 5.350 GHz

- 5.470 GHz to 5.725 GHz

- 5.725 GHz to 5.850 GHz Available channels: Dependent upon configured regulatory domain Dynamic frequency selection (DFS) optimizes the use of available RF spectrum Supported radio technologies:

- 802.11b: Direct-sequence spread-spectrum (DSSS)

- 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)

- 802.11n/ac: 3x3 MIMO with up to three spatial streams Supported modulation types:

- 802.11b: BPSK, QPSK, CCK

- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

- 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM Transmit power: Configurable in increments of 0.5 dBm Maximum (aggregate, conducted total) transmit power

(limited by local regulatory requirements):

-2.4-GHz band: +28 dBm (23 dBm per chain)

-5-GHz bands: +28 dBm (23 dBm per chain) Advanced cellular coexistence (ACC) feature to effectively deal with interference from cellular systems Maximum ratio combining (MRC) for improved receiver performance Cyclic delay diversity (CDD) for improved downlink RF performance Short guard interval for 20-MHz, 40-MHz and 80-MHz channels Space-time block coding (STBC) for increased range and improved reception Low-density parity check (LDPC) for high-efficiency error correction and increased throughput Transmit beam-forming (TxBF) for increased reliability in signal delivery data sheet ARUBA 228 ACCESS POINTS Supported data rates (Mbps):

- 802.11b: 1, 2, 5.5, 11

- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

- 802.11n: 6.5 to 450 (MCS0 to MCS23)

- 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3) 802.11n high-throughput (HT) support: HT 20/40 802.11ac very high throughput (VHT) support:

VHT 20/40/80 802.11n/ac packet aggregation: A-MPDU, A-MSDU poWer Worst-case power consumption from the AP (excluding power drawn by an attached USB device): 23W Power sources sold separately Power over Ethernet (PoE+): 48 Vdc (nominal) 802.3at-

compliant source antennas Six RP-SMA connectors for external antennas. other interfaCes Two 10/100/1000BASE-T Ethernet network interfaces (RJ-45)

- Auto-sensing link speed and MDI/MDX

- Load balancing support to achieve platform throughput greater than 1 Gbps

-802.3az Energy Efficient Ethernet (EEE)

-PoE-PD: 48 Vdc 802.3at PoE+

USB 2.0 port (Type A connector) Serial console interface (RJ-45) moUnting Included with AP:

- Mounting brackets (2) for attaching to 9/16-inch or 15/16-inch T-bar drop-tile ceiling Optional mounting kits:

- AP-220-MNT-C2: Aruba 220 series AP mount kit contains two ceiling-grid rail adapters for Interlude and Silhouette style rails.

- AP-220-MNT-W1: Aruba 220 series AP mount kit contains one flat-surface wall/ceiling mount bracket.

- AP-220-MNT-W2: Aruba 220 series AP mount kit contains one flat-surface wall/ceiling secure mount cradle. meChaniCal Dimensions/weight (unit, excluding mount accessories):

-230 mm (W) x 220 mm (D) x 130 mm (H), 9.0 (W) x 8.7 (D) x 5.1 (H)

- 2145 g/76 oz environmental Operating:

-Temperature: -40 C to +60 C (-40 F to +140 F)

-Humidity: 5% to 95% non-condensing

-Storage and transportation:

-Temperature: -40 C to +70 C (-40 F to +158 F) data sheet ARUBA 228 ACCESS POINTS regUlatory FCC/Industry of Canada CE Marked R&TTE Directive 1995/5/EC Low Voltage Directive 72/23/EEC EN 300 328 EN 301 489 EN 301 893 UL/IEC/EN 60950 EN 60601-1-1, EN60601-1-2 For more country-specific regulatory information and approvals, please see your Aruba representative. regUlatory model nUmbers AP-228 and IAP-228: APIN0228 CertifiCations CB Scheme Safety, cTUVus UL2043 plenum rating Wi-Fi Alliance certified 802.11a/b/g/n/ac Warranty Limited lifetime warranty minimUm operating system softWare versions ArubaOS 6.4.3.0 Aruba Instant 4.2.0.0 rF PerFOrMaNCe tabLe 802.11b 2.4 ghz 1 Mbps 2 Mbps 5.5 Mbps 11 Mbps 802.11g 2.4 ghz and 802.11a 5 ghz 6 Mbps 54 Mbps 802.11n ht20 2.4 ghz and 5 ghz MCS0/8 MCS7/15 802.11n ht40 2.4 ghz and 5 ghz MCS0/8 MCS7/15 802.11ac vht20 5 ghz MCS0 MCS9 802.11ac vht40 5 ghz MCS0 MCS9 802.11ac vht80 5 ghz MCS0 MCS9 Maximum transmit power (dbm) per transmit chain receiver sensitivity (dbm) per receive chain 23.0 23.0 23.0 23.0 23.0 18.0 23.0 17.0 23.0 17.0 23.0 16.0 23.0 16.0 23.0 16.0

-92.0

-92.0

-90.0

-88.0

-88.0

-75.0

-88.0

-71.0

-85.0

-68.0

-88.0

-65.0

-85.0

-62.0

-82.0

-59.0 data sheet ARUBA 228 ACCESS POINTS ordering information Part Number Description ap-220 series access points AP-228 IAP-228-RW IAP-228-US IAP-228-JP Aruba AP-228 Wireless Access Point, 802.11ac, 3x3:3, dual radio, antenna connectors Aruba Instant IAP-228 Wireless Access Point, 802.11ac, 3x3:3, dual radio, antenna connectors Restricted regulatory domain: Rest of World Aruba Instant IAP-228 Wireless Access Point, 802.11ac, 3x3:3, dual radio, antenna connectors Restricted regulatory domain: United States Aruba Instant IAP-228 Wireless Access Point, 802.11ac, 3x3:3, dual radio, antenna connectors Restricted regulatory domain: Japan ap-220 series access points (fips/taa) AP-228-F1 Aruba AP-228 Wireless Access Point, 802.11ac, 3x3:3, dual radio, antenna connectors (FIPS/TAA) data sheet ARUBA 228 ACCESS POINTS ARUBA 228 ACCESS POINTS data sheet ordering information Part Number Description generic indoor ap accessories (see info on aruba web site for part numbers) PD-9001GR-AC 30W 802.3at POE midspan injector, 10/100/1000Base-T Ethernet PoE injectors Antennas 1344 CrossmaN ave | suNNyvale, Ca 94089 1.866.55.aruBa | T: 1.408.227.4500 | FaX: 1.408.227.4550 | iNFo@aruBaNeTworks.Com www.arubanetworks.com 2015 Aruba Networks, Inc. Aruba Networks, Aruba The Mobile Edge Company (stylized), Aruba Mobilty Management System, People Move. Networks Must Follow., Mobile Edge Architecture, RFProtect, Green Island, ETIPS, ClientMatch, Bluescanner and The All Wireless Workspace Is Open For Business are all Marks of Aruba Networks, Inc. in the United States and certain other countries. The preceding list may not necessarily be complete and the absence of any mark from this list does not mean that it is not an Aruba Networks, Inc. mark. All rights reserved. Aruba Networks, Inc. reserves the right to change, modify, transfer, or otherwise revise this publication and the product specifications without notice. While Aruba Networks, Inc. uses commercially reasonable efforts to ensure the accuracy of the specifications contained in this document, Aruba Networks, Inc. will assume no responsibility for any errors or omissions. DS_AP228Series_012015

AP-228 Wireless Access Point Installation Guide The Aruba AP-228 is a fully temperature hardened, water resistant, indoor rated, dual-radio IEEE 802.11ac wireless access point. This access point use MIMO (Multiple-in, Multiple-out) technology and other high-throughput mode techniques to deliver high-performance, 802.11ac 2.4 GHz and 5 GHz functionality while simultaneously supporting existing 802.11a/b/g/n wireless services. The AP-228 access point works only in conjunction with an Aruba Controller. AP-228 Operations Wireless transceiver Wireless access point (IEEE 802.11 a/b/g/n/ac) Wireless air monitor (IEEE 802.11 a/b/g/n/ac) Protocol-independent networking functionality Compatibility with IEEE 802.3at PoE Central management configuration and upgrades with an Aruba Controller. Guide Overview AP-228 Hardware Overview on page3 provides a detailed hardware overview of the AP-228. Before You Begin on page5 provides key questions to ask and items to consider when deploying a wireless network. Installing the AP on page7 describes the multi-step process for a successful installation and deployment of the AP-228. Safety and Regulatory Compliance on page12 provides an overview of safety and regulatory compliance information. Package Contents AP-228 Access Point Cable Glands x2 USB Console Cable Copper Lug x1 M4 x 6 Screw x1 Installation Guide (this document) The weatherproof caps for Ethernet and Console interfaces are connected to the AP, not loose in the package. Mounting kits for use with the AP-228 access points are sold separately. Contact your Aruba sales representative for details. 0511728-02 | February 2015 1 Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including the original packing materials. Use these materials to repack and return the unit to the supplier if needed. 2 AP-228 Wireless Access Point | Installation Guide AP-228 Hardware Overview Figure 1 AP-228 Front View 2G0 2G1 2G2 5G0 5G1 5G2 Figure 2 AP-228 Bottom View Grounding Point USB Console Port, Reset button and LED LAN WAN LED The AP-228 is equipped with one LED that indicates the system status of the AP. Table 1 AP-228 LED Meanings during Boot Up LED Color/State Meaning System LED Off Red Green - Flashing Green - Steady No power to AP Initial power-up AP booting AP ready and 1000Mbps Ethernet link established. The LED turns off after 1200 seconds Green - Yellow, 6 seconds period AP ready and 10/100Mbps Ethernet link established. The LED turns off after 1200 seconds AP-228 Wireless Access Point | Installation Guide 3 Table 2 AP-228 LED Meanings during Operation LED Color/State System LED Solid Red One blink off every 3 seconds Two quick blink off 0.5 seconds apart cycled every 3 seconds Meaning General fault Radio 0 fault (5 GHz) Radio 1 fault (2.4GHz) USB Console Port The USB Micro-B console port allows you to connect the AP to a terminal or a laptop for direct local management. Use the included USB console cable to connect the AP. You can download the necessary driver for USB-UART adapter from support.arubanetworks.com under the Tools &

Resources tab. Use the following setting to access the terminal:

Table 3 Console Settings Baud Rate Data Bits Parity Stop Bits Flow Control 9600 8 None 1 None Ethernet Ports AP-228 is equipped with two10/100/1000Base-T (RJ-45) Gigabit Ethernet ports (WAN and LAN port) for wired network connectivity. The WAN port supports 802.3at Power over Ethernet (PoE), accepting 48 VDC (nominal) as a standard defined Powered Device (PD) from a Power Sourcing Equipment (PSE) such as a PoE midspan injector. These ports have RJ-45 female connectors with the pin-outs shown in Figure 3. Figure 3 Gigabit Ethernet Port Pin-Out 1000Base-T Gigabit Ethernet Port RJ-45 Female Pin-Out 1 2 3 4 5 6 7 8 Signal Name BI_DA+

BI_DA-

BI_DB+

BI_DC+

BI_DC-

BI_DB-

BI_DD+

BI_DD-

Function Bi-directional pair +A, POE Negative Bi-directional pair -A, POE Negative Bi-directional pair +B, POE Positive Bi-directional pair +C, POE Positive Bi-directional pair -C, POE Positive Bi-directional pair -B, POE Positive Bi-directional pair +D, POE Negative Bi-directional pair -D, POE Negative Reset Button The reset button can be used to return the AP to factory default settings. To reset the AP:

1. Power off the AP. 2. Press and hold the reset button using a small, narrow object, such as a paperclip. 3. Power-on the AP without releasing the reset button. The system LED will flash within 5 seconds. 4. Release the reset button. The system LED will flash again within 15 seconds indicating that the reset is completed. The AP will now continue to boot with the factory default settings. 4 AP-228 Wireless Access Point | Installation Guide Grounding Point Always remember to protect the AP by installing grounding lines. The ground connection must be complete before connecting power to the AP enclosure. Figure 4 AP-228 Rear View Before You Begin

!

CAUTION FCC Statement: Improper termination of access points installed in the United States configured to non-US model controllers will be in violation of the FCC grant of equipment authorization. Any such willful or intentional violation may result in a requirement by the FCC for immediate termination of operation and may be subject to forfeiture (47 CFR 1.80).

!

CAUTION

!

CAUTION EU Statement:

Lower power radio LAN product operating in 2.4 GHz and 5 GHz bands. Please refer to the ArubaOS User Guide for details on restrictions. Produit rseau local radio basse puissance operant dans la bande frquence 2.4 GHz et 5 GHz. Merci de vous referrer au ArubaOS User Guide pour les details des restrictions. Low Power FunkLAN Produkt, das im 2.4 GHz und im 5 GHz Band arbeitet. Weitere Informationen bezlglich Einschrnkungen finden Sie im ArubaOS User Guide. Apparati Radio LAN a bassa Potenza, operanti a 2.4 GHz e 5 GHz. Fare riferimento alla ArubaOS User Guide per avere informazioni detagliate sulle restrizioni. To meet regulatory restrictions, the access point must be professionally installed. Pre-Installation Network Requirements After WLAN planning is complete and the appropriate products and their placement have been determined, the Aruba controller(s) must be installed and initial setup performed before the Aruba APs are deployed. AP-228 Wireless Access Point | Installation Guide 5 For initial setup of the controller, refer to the ArubaOS Quick Start Guide for the software version installed on your controller. Pre-Installation Checklist Before installing your AP, be sure that you have the items listed below:

Gigabit Ethernet cable of required length IEEE 802.3at compliant PoE source Aruba Mobility Controller configured and installed on the network Layer 2/3 network connectivity to your AP One of the following network services:

Aruba Discovery Protocol (ADP) DNS server with an A record DHCP Server with vendor specific options Aruba Networks, Inc. in compliance with governmental requirements, has designed the AP-228 such that only authorized network administrators can change configuration settings. For more information about AP configuration, refer to the ArubaOS Quick Start Guide and ArubaOS User Guide.

!

CAUTION Access points are radio transmission devices and as such are subject to governmental regulation. Network administrators responsible for the configuration and operation of access points must comply with local broadcast regulations. Specifically, access points must use channel assignments appropriate to the location in which the access point will be used. Verifying Pre-Installation Connectivity Before you install APs in a network environment, make sure that the APs will be able to locate and connect to the controller when they are powered on. Specifically, you must verify the following conditions:

When connected to the network, each AP is assigned a valid IP address. APs can locate the controller. Refer to the ArubaOS Quick Start Guide for instructions on locating and connecting to the controller. Identifying Specific Installation Locations Use the AP placement map generated by Arubas RF Plan software application to determine the proper installation location(s). Each location should be as close as possible to the center of the intended coverage area and should be free from obstructions or obvious sources of interference. These RF absorbers/reflectors/interference sources will impact RF propagation and should have been accounted for during the planning phase and adjusted for in RF plan. Identifying Known RF Absorbers/Reflectors/Interference Sources Identifying known RF absorbers, reflectors, and interference sources while in the field during the installation phase is critical. Make sure that these sources are taken into consideration when you attach an AP to its fixed location. Examples of sources that degrade RF performance include:

Cement and brick Objects that contain water 6 AP-228 Wireless Access Point | Installation Guide Metal Microwave ovens Wireless phones and headsets Installing the AP Service to all Aruba products should be performed by trained service personnel only. Using the AP-220-MNT-W1 Mount Kit The AP-228 access point can be installed on a wall by using AP-220-MNT-W1 mount kit. The AP-228 access point does not ship with any mount kit. The AP-220-MNT-W1 mount kit is available as accessories and must be ordered separately. For details on AP-220-MNT-W1, please refer to the AP-220-MNT-W1 Installation Guide. 1. Begin by attaching the wall mount adapter to the wall. Install any necessary wall anchors. Wall anchors are not included in this kit. a. b. Align the screw holes in the mounting bracket with the previously installed anchors or demarcated screw points. Insert the screws to secure the mounting bracket. Screws are not included in this kit. c. AP-228 Wireless Access Point | Installation Guide 7 Figure 5 Attaching the Adapter to a Wall Figure 6 Attaching the Adapter to a Wall (Alternate) 1 1 _ 0 2 2

-

P A 4 1 _ 0 2 2

-

P A 2. Attach necessary cables and/or antennas to the AP. 3. Attach the AP to the secured mounting adapter as shown in Figure 7. a. Align the AP with a mounting adapter, placing the AP so that its mounting tabs are at an angle of approximately 30 degrees to the adapter. 4. Pushing toward the wall, rotate the AP clockwise until it clicks into place (see Figure 7). 8 AP-228 Wireless Access Point | Installation Guide Figure 7 Attaching the AP to the Mounting Bracket Figure 8 Completed Installation Grounding the AP The grounding must be completed before powering up the AP. The grounding wire should be #8 AWG. 1. Peel the cover of one end of the grounding wire and place the bare grounding wire into the included copper lug, and press firmly with the crimping pliers. 2. Fasten the copper lug to the grounding hole on the AP with the included M4 x6 screw. Connecting the Ethernet Cable To connect the Ethernet cable to the AP, perform the following steps using the cable glands that ships with your AP. Failure to use the included Ethernet cable glands can lead to connectivity and POE issues. WARNING AP-228 Wireless Access Point | Installation Guide 9 The cable is not included and must be purchased separately. Purchase a suitable UV-resistant, outdoor rated, CAT 5E or better RJ45 cable for use with the AP. Figure 9 Installing a Cable Gland Seals Sealing Nut Clamping Ring CAT 5E or Better Cable 1. Slide the sealing nut over the cable (without the RJ45 connector attached to the end). 2. Slide the clamping ring over the cable. 3. Using a crimping tool, attach the shielded RJ45 connector to the end of the cable. 4. Remove the weatherproof cap on the Ethernet port. 5. Insert the RJ45 connector to the Ethernet port. 6. Screw the clamping ring onto the Ethernet port. 7. Screw the sealing nut onto the clamping ring. The seals inside the clamping ring by factory default is applicable for cables with 5-8.5 mm diameter. In the cable gland kit, another seals is provided for use with the cables with 7-10 mm diameter. Verifying Post-Installation Connectivity The integrated LEDs on the AP can be used to verify that the AP is receiving power and initializing successfully (see Table 1 and Table 2). Refer to the ArubaOS Quick Start Guide for further details on verifying post-installation network connectivity. Configuring the AP AP Provisioning/Reprovisioning Provisioning parameters are unique to each AP. These local AP parameters are initially configured on the controller which are then pushed out to the AP and stored on the AP itself. Aruba recommends that provisioning settings be configured via the ArubaOS Web UI only. Refer to the ArubaOS User Guide for complete details. AP Configuration Configuration parameters are network or controller specific and are configured and stored on the controller. Network configuration settings are pushed out to the AP(s) but remain stored on the controller. Configuration settings can be configured via the ArubaOS Web UI or ArubaOS CLI. Refer to the ArubaOS User Guide for complete details. 10 AP-228 Wireless Access Point | Installation Guide Product Specifications Mechanical:

Device Dimensions (HxWxD): 8.7 inches x 5.9 inches x 2.6 inches (221mm x 150mm x 66mm) Electrical Ethernet 2 x 10/100/1000Base-T auto-sensing Ethernet RJ-45 Interfaces MDI/MDX Power over Ethernet (IEEE 802.3at compliant), 48VDC(nominal) /0.6A Power POE support on WAN port: 802.3at-compliant POE sourcing devices Environmental Operating Temperature: -40C to 60C (-40F to 140F) Humidity: 5% to 95% non-condensing Storage Temperature: -40C to 85C (-40F to 185F) For additional specifications on this product, please refer to the data sheet. The data sheet can be found at www.arubanetworks.com. AP-228 Wireless Access Point | Installation Guide 11 Safety and Regulatory Compliance Aruba Networks provides a multi-language document that contains country-specific restrictions and additional safety and regulatory information for all Aruba access points. This document can be viewed or downloaded from the following location: www.arubanetworks.com/safety_addendum Regulatory Model Name The regulatory model name of AP-228 is APIN0228. FCC This device is electronically labeled. To view the FCC ID:

1. Log into the controller WebUI 2. Navigate to Maintenance > Controller > About.

!

CAUTION

!

CAUTION

!

CAUTION Aruba access points must be installed by a professional installer. The professional installer is responsible for ensuring that grounding is available and it meets applicable local and national electrical codes. RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits. This equipment should be installed and operated with a minimum distance of 9.84 inches (25 cm) between the radiator and your body for 2.4 GHz and 5 GHz operations. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Class B Part 15 This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturers instructions, may cause interference harmful to radio communications. If this equipment does cause interference, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or TV technician for help. 12 AP-228 Wireless Access Point | Installation Guide EU Regulatory Conformance Aruba Networks, Inc., hereby declares that the APIN0228 device model is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC -CE(!). The Declaration of Conformity made under Directive 1999/5/EC is available for viewing at www.arubanetworks.com. Proper Disposal of Aruba Equipment For the most current information about Global Environmental Compliance and Aruba products, see our website at www.arubanetworks.com. Waste of Electrical and Electronic Equipment Aruba products at end of life are subject to separate collection and treatment in the EU Member States, Norway, and Switzerland and therefore are marked with the symbol shown at the left (crossed-out wheelie bin). The treatment applied at end of life of these products in these countries shall comply with the applicable national laws of countries implementing Directive 2002/96EC on Waste of Electrical and Electronic Equipment (WEEE). European Union RoHS Aruba products also comply with the EU Restriction of Hazardous Substances Directive 2011/65/EC (RoHS). EU RoHS restricts the use of specific hazardous materials in the manufacture of electrical and electronic equipment. Specifically, restricted materials under the RoHS Directive are Lead (including Solder used in printed circuit assemblies), Cadmium, Mercury, Hexavalent Chromium, and Bromine. Some Aruba products are subject to the exemptions listed in RoHS Directive Annex 7 (Lead in solder used in printed circuit assemblies). Products and packaging will be marked with the RoHS label shown at the left indicating conformance to this Directive. China RoHS Aruba products also comply with China environmental declaration requirements and are labeled with the EFUP 10 label shown at the left. 10

Hazardous Materials Declaration

(Parts)

(PCA Boards)

(Mechanical Sub-Assemblies)

(Hazardous Substance)

SJ/T11363-2006 Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the relevant threshold of the SJ/T11363-2006 standard.

Indicates that the concentration of the hazardous substance of at least one of all homogeneous materials in the parts is above the relevant threshold of the SJ/T11363-2006 standard.

This table shows where these substances may be found in the supply chain of electronic information products, as of the date of sale of the enclosed product.

The Environment- Friendly Use Period (EFUP) for all enclosed products and their parts are per the symbol shown here. The Environment- Friendly Use Period is valid only when the product is operated under the conditions defined in the product manual. AP-228 Wireless Access Point | Installation Guide 13 Canadian Statement Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. 14 AP-228 Wireless Access Point | Installation Guide This page is intentionally left blank. AP-228 Wireless Access Point | Installation Guide 15 Contacting Aruba Networks Web Site Support Main Site Support Site http://www.arubanetworks.com https://support.arubanetworks.com Software Licensing Site https://licensing.arubanetworks.com/login.php Wireless Security Incident Response Team (WSIRT) Support Emails http://www.arubanetworks.com/support/wsirt.php Americas, APAC and EMEA support@arubanetworks.com WSIRT Email Please email details of any security problem found in an Aruba product. sirt@arubanetworks.com Telephone Support Aruba Corporate FAX Support

+1 (408) 227-4500

+1 (408) 227-4550 United States 800-WI-FI-LAN (800-943-4526) Universal Free Phone Service Number (UIFN): Australia, Canada, China, France, Germany, Hong Kong, Ireland, Israel, Japan, Korea, Singapore, South Africa, Taiwan, and the UK.

+800-4WIFI-LAN (+800-49434-526) All Other Countries

+1 (408) 754-1200 2015 Aruba Networks, Inc. All rights reserved. 16 AP-228 Wireless Access Point | Installation Guide www.arubanetworks.com 1344 Crossman Avenue Sunnyvale, California 94089 Phone: 408.227.4500 Fax 408.227.4550