FCC ID: W9HLCDD0017 Part15 Subpart B-LCD Monitor

LCD TV USER MANUAL Beforeusing the TV, Please read this manual thoroughly, retain it for future reference. LTDN46V86US English ii Hisense LTDN46V86US 46" LCD TV Contents CHILD SAFETY . 1 Important safety instructions . 2 Warnings . 2 Cautions . 2 Accessories . 3 Installing and removing the stand . 3 Installing the stand . 3 Removing the stand . 4 Installing a wall-mount bracket . 4 TV components . 4 Front and side controls . 4 Back connections . 5 Remote control . 5 Using the remote control . 6 Installing remote control batteries . 6 Aiming the remote control . 7 Making connections . 7 Connecting the power . 7 Selecting a location . 8 Connecting an HDMI device . 8 Connecting a component video device . 8 Connecting an antenna, cable TV, or satellite TV box . 9 Connecting a VCR, camcorder, or game console . 9 Connecting a computer . 9 Connecting a home theater system . 10 Connecting headphones . 10 Turning on your TV for the rst time . 11 Understanding the basics . 11 Turning your TV on or o . 11 Selecting the video input source . 11 Selecting a channel . 11 Adjusting the volume . 12 Displaying program information . 12 Navigating the menus . 12 On-screen menu overview . 12 Adjusting the picture . 13 Choosing the display format (aspect ratio) . 13 Adjusting the sound . 14 Selecting the audio mode . 14 Changing channel settings . 14 Setting parental controls . 14 Adjusting TV settings . 15 Troubleshooting . 16 iii Video and audio . 16 Remote control . 16 General . 17 Maintenance . 17 Cleaning . 17 Specications . 17 Legal notices . 17 1 f It makes a difference how and where you use CHILD SAFETY your flat panel display As you enjoy your new product, keep these safety tips in mind The issue The home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturers recommendations. We and the consumer electronics industry are committed to making home entertainment enjoyable and safe. TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause injury. Tune into safety

One size of TV stand does not fit all. Use only a TV stand rated for the weight of your TV.

Carefully read and understand all enclosed instructions for proper use of this product.

Dont let children climb on or play with entertainment system furniture and TVs.

Dont place TVs on furniture that can easily be used as steps, such as a crate or chest of drawers.

Remember that children can become excited while watching a program, especially on a larger-than-life TV. Make sure that you place or install the TV where it cannot be pushed, pulled over, or knocked down.

Make sure that you route all cords and cables so that they cannot be pulled or grabbed by curious children. Wall mounting If you decide to wall mount your TV, always remember:

One size of wall mount does not fit all. Use only a wall mount rated for the weight of your TV and that has been recommended by this TV manufacturer, listed in this manual, or otherwise listed by an independent laboratory as suitable for your TV. Follow all instructions supplied by the TV and wall mount manufacturers. If you have any doubts about your ability to safely wall mount your TV, get help from a professional installer.

Make sure that the wall where you are mounting the TV is appropriate. Some wall mounts are not designed to be mounted to walls backed with steel studs or cinder blocks. If you are unsure, ask a professional installer. TVs can be heavy. At least two people are required for safe wall mount installation.

2 Important safety instructions Important safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with a dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Only use attachments/accessories specied by the manufacturer. 12 Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15 The wall plug is the disconnecting device. The plug must remain readily operable. 16 An apparatus with a three-prong, grounding-type plug is a Class I apparatus, which needs to be grounded to prevent possible electric shock. Make sure that you connect this Class I television to a grounding-type, three-prong outlet. 17 Remote control batteries should not be exposed to excessive heat such as sunshine, re, or the like. 18 The apparatus should not be exposed to dripping or splashing, and no objects lled with liquids, such as vases, should be placed on the apparatus. Warnings Electric shock hazard To reduce the risk of re or electric shock, do not remove any cover or expose the device to rain or moisture. No user-serviceable parts are inside. Refer servicing to qualied service technicians. Lightning For added protection for your device receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the power outlet and disconnect any antenna or cable system. This helps prevent property damage and personal injury from lightning and power line surges. Power lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. Handling the LCD panel

Your TVs screen is made of glass. Do not drop your TV or hit, jolt, or press hard against the LCD panel. If the screen breaks, be careful of broken glass.

If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inammation.

If the liquid gets in your mouth, immediately gargle, rinse, and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water. Replacement parts When replacement parts are required, make sure that the service technician uses replacement parts specied by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in re, electric shock, personal injury, or other hazards. Safety check After completing any service or repair to this device, ask the service technician to perform routine safety checks to determine that your TV is in correct operating condition. Power source Operate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult an electrician or your local power company. Cautions Damage requiring service Unplug this TV from the power outlet and refer servicing to qualied service personnel under the following conditions:

When the power supply cord or plug is damaged or frayed.

If liquid has been spilled or objects have fallen into your TV.

If your TV has been exposed to rain or water. Installing and removing the stand 3

If your TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because incorrect adjustment of other controls may result in damage and will often require extensive work by a qualied technician to restore your TV to its normal operation.

If your TV has been dropped or damaged in any way.

When your TV exhibits a distinct change in performance. Outdoor antenna grounding If an outside antenna or cable system is connected to your TV, make sure that the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to correct grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of the antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. 1 2 3 4 5 6 7 Antenna lead-in wire Grounding clamp Antenna discharge unit Grounding conductors Ground clamps Power service grounding electrode system Electric service equipment 1 2 3 4 5 6 7 Note to CATV system installer Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides guidance for correct grounding. Specically, it states that the cable ground must be connected to the grounding system of the building as close to the point of cable entry as practical. Condensation Moisture will form on the TV if the TV is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, the TV's performance may be impaired. To prevent this, let the TV stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the TV is exposed to the breeze from an air conditioner. In such cases, change the location of the TV. Mobile telephone warning To avoid interference with your TV picture and sound, operating problems, or even damage, keep your cordless and cellular telephones away from the TV. End of life directives Your TV contains tin-lead solder and a uorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated for environmental reasons. Your TV also contains material that can be recycled and reused. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance at www.eia.org to nd a recycler in your area. Non-active pixels The LCD panel contains almost 3 million thin lm transistors, which provide exceptionally sharp video quality. Occasionally, a few non-active pixels may appear on the screen as a xed blue, green, or red point. These non-active pixels do not adversely aect the performance of your TV, and are not considered defects. Accessories Make sure the following accessories are included in the box with your TV:

Remote control

User Manual

AAA batteries (2)

Stand

Power cord

Quick Setup Guide Installing and removing the stand You must install your TV into the stand in order for it to stand upright on a cabinet or other at surface. If you intend to mount your TV on a wall or other vertical surface, you must remove the stand column. Warning: Before attampting assembly or removal of the stand, unplug the AC power cord. Cautions:

Read these instructions carefully before you try to assemble the stand or remove the stand column.

Make sure that you handle the TV carefully when attempting to assemble or remove the stand. If you are not sure of your ability to do this, contact a professional installer or service technician. Hisense is not responsible for any damages or injuries that occur because of mishandling or incorrect assembly.

Use a soft cushion or covering to prevent scratching or damage to the TV screen or cabinet. Installing the stand Note: Your TV may dier from the illustrations shown. To install the stand:

1 Remove the stand from the box and place it on a table or bench. 2 Lay the TV (screen down) on the edge of the table or bench. Make sure that you put a soft cloth or cushion between the table or bench and the TV. 4 TV components 3 Align the base with the TV, then secure the stand to the TV with the four screws (M6 x 12) provided. 3 Secure the wall-mount bracket to the back of your TV using the four screws provided with the bracket. Baseplate 4 Carefully lift the TV into an upright position. To remove the stand, see the following procedure. Removing the stand You must remove the stand before you can wall-mount the TV. Note: Your TV may dier from the illustrations shown. TV components Front controls To remove the stand:

1 Lay the TV (screen down) on the edge of the table or bench. Make sure that you put a soft cloth or cushion between the table or bench and the TV. 2 Remove the four screws holding the stand to the TV, then remove the stand. Item Name Description 1 2 3 4 5 6 7 MENU INPUT VOL / VOL CH /CH

(power) Power indicator Remote control sensor Press to open the on-screen menu. Press to open the INPUT SOURCE menu. For more information, see Selecting the video input source on page 11. In TV mode, press to increase or decrease the volume. In menu mode, press to move right or left or to adjust menu settings. In TV mode, press to select the next or previous channel. In menu mode, press to move up or down. Press to turn on the TV or put the TV in standby mode. Caution: The TV continues to receive power even in standby mode. Unplug the power cord to disconnect power. Lights red when your TV is in standby mode. Turns o when the TV is on. Receives signals from the remote control. Do not block. For more information, see Aiming the remote control on page 7. Installing a wall-mount bracket If you want to attach the TV to a wall-mount bracket (not provided), you should rst remove the stand, if it has been installed. Warning: These instructions are for use by qualied service person only. To reduce the risk of hazards, do not perform any servicing other than that contained in the operating instructions unless you are qualied to do so. To install a wall-mount bracket:

1 Lay your TV face down on a table or bench. Make sure that you put down a soft cushion or cloth so that your TV is not scratched. 2 Remove the pedestal stand. See Removing the stand above. TV components 5 snoitcennoc kcaB lortnoc etomeR 5 8 1 7 2 3 4 6 9

Item Description 1 2 3 ANT/CABLE IN PC IN VGA PC IN AUDIO 4 HDMI1/HDMI2 5 6 7 8 9

(headphone) Service port COMPONENT Y/PB/PR and AV IN DIGITAL OUT AC IN Connect an antenna or cable TV to this jack. For more information, see Connecting an antenna or cable TV (no box) on page 11. Connect the video (VGA) for a computer to this jack. For more information, see Using VGA on page 14. Connect the audio for a computer or a DVI device to this jack. For more information, see Using VGA on page 14 or Using DVI (same as HDMI but requires a sound connection) on pages 8 or 11. Connect HDMI devices to these jacks. An HDMI cable carries both video and sound. You do not need to make an audio connection for an HDMI device. For more information, see Using HDMI

(best) on pages 8, 11, or 14. When connecting a DVI device using an HDMI-DVI adapter, connect the device to the HDMI1 or HDMI2 jack. Connect headphones to this jack. For more information, see Connecting headphones on page 15. For software update only. Do not use. Connect the video for a component video device to these jacks. Connect the video cable from a composite video device to the Y jack. For more information, see Using component video (better) on pages 9 or 12. Connect an audio amplier to this jack. For more information, see Using digital audio on page 15. Connect the supplied power cord here. TV INPUT AV COMP HDMI VGA ASPECT GUIDE PICTURE SOUND VOL DISPLAY MUTE CH MENU EXIT ENTER 1 4 7 7 2 5 8 8 0 0 3 6 9 LAST CCD MTS/SAP TIME SLEEP Item Name Description POWER COMP AV ASPECT GUIDE

VOL VOL MENU ENTER 1 2 3 4 5 6 7 8 9 Press to turn on the TV or put the TV in standby mode. Caution: The TV continues to receive power even in standby mode. Unplug the power cord to disconnect power. Press repeatedly to select a device connected to the COMP IN jacks. Press repeatedly to select a device connected to the AV IN jacks. Press to select the video display format. For more information, see To adjust the picture:

on page 13. Press to open the DTV program guide (if available) when viewing digital channels. For more information, see Displaying program information on page 12. Press to increase or decrease the volume. Press to open the on-screen menu. Press to move up, down, left, or right in on-screen menus or to adjust menu settings. Press to conrm selections in on-screen menus or to open sub-menus. 6 Using the remote control Using the remote control Installing remote control batteries To install remote control batteries:

1 Press down on the battery compartment cover lock, then remove the remote control cover. 2 Insert two AAA batteries into the battery compartment. Make sure that the + and symbols on the batteries match the +

and symbols in the battery compartment. 3 Replace the cover. Make sure that the lock snaps into place. Battery precautions:

Dispose of batteries as hazardous waste.

Do not mix batteries of dierent types.

Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and can cause old batteries to leak.

Remove batteries as soon as they become inoperable. Chemicals that can leak from the batteries can cause a rash. If the batteries leak, clean the battery compartment with a cloth.

If the remote control is not used for an extended period of time,

Do not expose batteries to excessive heat such as sunshine, re, or remove the batteries. other heat sources. Item Name Description Numbers

. (dot) Program guide

(EPG) function buttons CCD MTS/SAP 10 11 12 13 14 TV 15 INPUT HDMI VGA SOUND PICTURE CH

DISPLAY MUTE EXIT LAST TIME SLEEP 16 17 18 19 20 21 22 23 24 25 26 Press the number buttons to enter channel numbers or the parental control password. For more information, see Selecting a channel on page 11. Press to select a digital sub-channel. See Selecting a channel on page 11. After pressing the GUIDE button when viewing digital channals, the same color buttons will appear with explanations in the on-screen display (OSD). Follow the steps shown in the OSD. Press to turn closed captioning on or o. For more information, see Adjusting TV settings on page 15. When viewing analog (non-digital) channels, press to select STEREO, SAP (secondary audio language), or MONO. When viewing digital channels, press to select the audio track. For more information, see Selecting the audio mode on page 14. Press to select the TV as the video input source. For more information, see Selecting the video input source on page 11. Press to open the INPUT SOURCE menu, then press to select the video input source you want. For more information, see Selecting the video input source on page 11. Press repeatedly to select a device connected to one of the HDMI jacks. Press to select VGA mode. or Press to select the sound mode. You can select Standard, Speech, User, and Music. For more information, see Selecting the audio mode on page 14. Press to select the video mode. You can select Vivid, Standard, Theater, Energy Saving, Sports, and Custom. For more information, see Adjusting the picture on page 13. Press to go to the next or previous channel in the channel list. For more information, see Turning on your TV for the rst time on page 11 and Selecting a channel on page 11. Press to display the information banner. For more information, see Displaying program information on page 12. Press to mute the sound. Press again to restore the sound. Press to close the on-screen menu. Press to go to the last viewed channel. For more information, see Selecting a channel on page 11. Press to display the current time. Press to set the sleep timer. For more information, see Adjusting TV settings on page 15. Making connections 7 Aiming the remote control Notes:

The AC plug on the TV may be dierent from the one shown.

Make sure that you only use the type of power source indicated on the

Always unplug the power cord when not using the TV for a long marking label. period of time. To aim the remote control:

of your TV.

Point the remote control towards the remote sensor on the front TV INPUT AV COMP HDMI VGA ASPECT GUIDE PICTURE SOUND VOL DISPLAY MUTE CH MENU EXIT ENTER 1 4 7 7 2 5 8 8 0 0 3 6 9 LAST CCD MTS/SAP TIME SLEEP Notes:

Do not expose the remote control to shock or liquids.

Do not use the remote control in an area with high humidity.

Do not place the remote control in direct sunlight.

Do not place objects, such as furniture, between the remote control and the remote sensor.

The remote control may not work if direct sunlight or bright light shines on the remote sensor. Either move your TV or change the angle at which you use the remote control. Making connections Before you make any connections:

Check the plugs on the ends of cables to make sure that they are the correct type before you try plugging them into jacks on the TV.

Make sure that all plugs are securely inserted into the jacks. Loose connections can result in image or color problems.

When connecting devices to the TV, make sure that the TV and the device are turned o and that the power cords are unplugged. Connecting the power To connect the power cord:

Connect the power cable to the AC IN jack on the back of the TV, then connect the other end to a power outlet. Power outlet Power cord 8 Making connections Selecting a location Connecting a component video device Component cables often have red, green, and blue color-coded video connectors and red and white audio connectors. Match the colors when making connections. To connect a component video device:

1 Connect a component video cable to the COMPONENT OUT jacks on the component video device. AV VIDEO L R L COMP Y Pb Pr R ANT/CABLE IN DIGITAL AUDIO OUT Y B L R R Back of TV i l e b a c o e d v t n e n o p m o C l e b a c o d u A i Component video device 2 Connect the other end of the component video cable to the COMPONENT IN jacks on the side of your TV. 3 Connect an audio cable to the AUDIO OUT jacks (L/R) on the component device. 4 Connect the other end of the audio cable to the COMPONENT AUDIO-R and AUDIO-L jacks on the back of your TV. To play from the component video device:

1 Turn on the TV, then press INPUT. The INPUT SOURCE menu opens. 2 Press or to select Component, then press ENTER. Note: You can also press COMP once to select Component. 3 Turn on the component video device and start playback. Refer to the instructions that came with the component video device. You should select a location for the TV:

Where direct light does not reect on the screen

That has indirect and soft lighting

Where the TV has access to an antenna or cable TV connection

Where the TV has access to a power outlet Note: Watching TV in total darkness or with a reection on the screen may cause eye strain. Connecting an HDMI device Note: If your device has an HDMI connection, we recommend you use it to get the best picture and sound quality possible. To connect an HDMI device:

Connect one end of an HDMI cable (not included) to the HDMI 1, HDMI 2 jack on the back of your TV, then connect the other end of the cable to the HDMI OUT jack on the HDMI device. Back of TV HDMI device HDMI cable Note: To connect a DVI device, use a DVI to HDMI adapter cable to connect to the HDMI jack on the TV, then connect an audio cable to the PC IN AUDIO jack on the back of the TV. To play from the HDMI device:

1 Turn on the TV, then press INPUT. The INPUT SOURCE menu opens. 2 Press HDMI2. or to select HDMI1, HDMI2, then press ENTER. Note: You can also press HDMI once to select HDMI1, twice to select 3 Turn on the HDMI device, then set it to the correct mode. Refer to the instructions that came with the HDMI device. Making connections 9 Connecting an antenna, cable TV, or satellite TV box If you are connecting a satellite TV or cable box, you can use one of the following (if available):

Best - HDMI cable

Better - Video component cables

Good - Video composite cable

Acceptable - 75-ohm coaxial cable. To connect an antenna, cable TV, or satellite TV box:

Connect one end of a 75-Ohm, coaxial cable to the ANT/CABLE IN jack on the back of the TV, then connect the other end of the cable to the antenna or cable TV wall jack. Home antenna terminal

(75 ohm) ANT/CABLE jack on the back of the TV Antenna, cable TV, or satellite box 75-Ohm coaxial cable ANT/CABLE jack on the back of the TV ANT/CABLE Notes:

We recommend using a 75-Ohm, coaxial cable to reduce interference and noise that may be caused by radio wave transmissions.

Do not bundle the coaxial cable with the power cord or any other cables.

If you are using an antenna and reception is not good, contact a service technician to adjust the antenna. Connecting a VCR, camcorder, or game console Note: If the VCR, camcorder, or game console has component jacks

(better), or an HDMI jack (best), connect them using the best available connection. To connect a VCR, camcorder, or game console:

1 Make sure that your TVs power cord is unplugged and the VCR, camcorder, or game console is turned o. 2 Connect one end of a standard AV cable into the AV IN VIDEO jack on the back of the TV, then connect the other end of the cable to the AV OUT VIDEO jack on the external device. VCR, camcorder, or game console AV cable Note: Cables are often color-coded to connectors. Connect yellow to yellow, red to red, and white to white. Back of TV AV VIDEO L R L COMP Y Pb Pr R ANT/CABLE IN DIGITAL AUDIO OUT 3 Connect the audio connectors of the AV cable (the red and white connectors) to the AV OUT AUDIO jacks of the external device, then connect them to the AV IN L and R jacks on the back of your TV. To play the external AV device:

1 Turn on the TV, then press INPUT. The INPUT SOURCE menu opens. 2 Press or to select AV then press ENTER. Note: You can also press AV once to select AV. 3 Turn on the device, then start playback on the device. Connecting a computer To connect a computer:

1 Make sure that your TVs power cord is unplugged and the computer is turned o. 2 Connect one end of a VGA cable (not included) to the VGA jack on the back of the TV, then connect the other end of the cable to the VGA jack on the computer. Computer VGA cable Audio cable Note:The VGA cable willl not supplied with product. We strongly recommend to use VGA cable with 2 cores as shown in the gure. 10 Making connections 3 Connect one end of an audio cable with a stereo mini-plug (not included) to the PC/DVI AUDIO IN jack on the back of the TV, then connect the other end of the cable to the AUDIO OUT jack on the computer. Connecting headphones Warning: When using headphones, adjust the headphone volume to avoid excessively loud volume which can damage your hearing. To connect headphones:

Plug the headphones (not included) into the

(headphone) jack on the back of the TV. Note: The TV sound automatically mutes when headphones are connected. To play video from the computer:

1 Turn on the TV, then press INPUT. The INPUT SOURCE menu opens. 2 Press 3 Turn on the computer, then adjust the computer display to select VGA, then press ENTER. or properties as needed. Connecting a home theater system Connecting using a digital audio cable To connect using a digital optical cable:

1 Make sure that your TVs power cord is unplugged and the home theater system is turned o. 2 Connect one end of a digital coaxial audio cable (not included) to the DIGITAL AUDIO OUT jack on the back of the TV. Back of TV l e b a c l a i x a o c l a t i g D i Home theater system 3 Connect the other end of the audio cable to the digital coaxial input jack on the home theater system. Note: The DIGITAL OUTPUT jack only works with digital TV channels or when using an HDMI device. To play TV sound through a home theater system:

1 Turn on the TV and select a program to watch. 2 Turn on the home theater system and select the TV sound source, then adjust the volume to a comfortable level. Turning on your TV for the rst time 11 Turning on your TV for the rst time 6 Press or scan begins. to select Scan, then press ENTER. The channel To congure your TV:

1 Make sure that you have inserted the batteries in the remote control, connected your devices to the TV, and connected the AC power. 2 Press

(Power), then wait several seconds. The Initial Setup screen opens (only the rst time you turn on your TV). Follow the prompts to complete the setup. Initial Setup Welcome Welcome to use the Wizard for initial Setup!!

Please press [ENTER] to start the wizard. 3 Press ENTER to start the wizard, the language select screen opens. Initial Setup Language Your TV automatically scans for available channels in your area and stores the channel information in the channel list. This may take several minutes. While scanning, the TV displays a progress report. Notes:

Channel scan is not necessary if you are using a satellite or cable box.

Channel scan can take up to 30+ minutes.

You can press EXIT at any time to stop the auto scan, but you will need to run the auto scan again to create a channel list. Please select your language:

English Espanl Franais Understanding the basics Turning your TV on or o To turn your TV on or o (standby mode):

1 Plug the power cord into an AC power outlet. 2 Press 3 Press

(power). Your TV turns on. again to turn o your TV. When you turn o your TV, it goes into standby mode. Warning: When your TV is in standby mode, it is still receiving power. To completely disconnect power, unplug the power cord. Note: If your TV does not receive an input signal for several minutes, it automatically goes into standby mode. Selecting the video input source To select the video input source:

1 Turn on your TV, then press INPUT on the remote control or on the TV. The INPUT SOURCE menu opens. 2 Press or to highlight the video source you want, then press ENTER. Options include TV, AV, Component, VGA (computer), HDMI1 or HDMI2. Selecting a channel Tip: If you are using a cable or satellite box, use the remote control that came with that device to change channels. To select a channel:

Press CH

Press the number buttons to enter the channel number you want, then wait for the channel to change, or press ENTER to change the channel immediately. to go to the next or previous channel.

/CH 4 Select to select the menu language you want, then press ENTER Next Back or Press ENTER. The Tuner Mode screen opens. Initial Setup Tuner Antenna Cable Please select your tuner mode:

Select ENTER Next Back 5 Press or to highlight Antenna or Cable depending on the type of connection you have, then press ENTER. The Channel Scan screen opens. Initial Setup Channel Scan First,please connect cable and/or antenna. Scan Skip Scan Start channel scan now?

If you skip this step, the channel scan could be performed in Menu. Select ENTER Next Back 12 Understanding the basics

To select a digital channel, press the number buttons to select the main digital channel, then press the dot (.) button, then the number buttons again to select the sub-channel. Wait for the channel to change or press ENTER to change the channel. Note: Button presses must be within three seconds of each other.

Press LAST to go to the last channel viewed. Adjusting the volume To adjust the volume:

Press VOL

Press MUTE to temporarily turn o all sound. Press MUTE again to to increase or decrease the volume.

/VOL to restore the sound. On-screen menu overview Use the on-screen menu to congure the various operational settings of your TV. To access the menu, press MENU. The menus and their corresponding functions are described in the following table:

Picture Mode Brightness Contrast Lets you enable one of six preset viewing options optimized for dierent viewing conditions. Lets you adjust the level of brightness on the screen. Increasing brightness can add more light to dark areas of the picture. Lets you adjust the level of picture contrast. Increasing the contrast adds more light to the white areas of the picture. Saturation Lets you adjust the level of color intensity. HUE Lets you adjust the overall color of the picture Displaying program information Video To display program information:

Press DISPLAY to show an information banner. The information banner shows current program information such as channel number, video input source, and resolution.

Digital signal informationDisplays channel number, station name, channel label (if preset), broadcast program name, TV rating, signal type, audio information, resolution, CC mode, current time, and current program start and end times when watching a digital channel.

Analog signal informationDisplays channel number, channel label (if preset), signal type, audio information, and resolution when watching an analog channel.

Press GUIDE to show the digital program guide, which may show a list of available programs, program times, and program summaries, depending on the information provided by the broadcaster. Navigating the menus MENU Press to display the Main menu. ENTER ENTER Press to select menus, to adjust selected items, or move on-screen cursor left or right. Press to select the menu items. ENTER Press to conrm your selection or enter a sub-menu. EXIT Press to close the menu or return to the previous screen. Audio Setup Sharpness Color Temperature Advanced Video Balance Surround Sound Equalizer

(only supported in TV/AV mode). Lets you adjust the focus of the picture. Increase sharpness for a clearer picture, or decrease sharpness for a smoother picture. Lets you select one of three preset color temperature settings: Cool, Standard, or Warm. Accesses advanced video settings such as DNR, Adaptive Luma Control, Flesh Tone. Lets you adjust the balance between the left and right speakers. Lets you turn the surround sound eect on or o. Lets you select the audio frequency you want to adjust and change its value. Auto Volume Control SPDIF Type Lets you select the preferred audio format for SPDIF audio signals. SPDIF is only available on digital channels or when using an HDMI device. Choose from PCM,Dolby digital, or O. Lets you select whether to apply the audio settings for all input sources, as well as for both analog and digital TV channels (OFF), or only to the current one (ON). Lets you select the language for the on-screen display. Choose from English, French, or Spanish. Lets you set the OSD timeout. You can select the time from 5 sec to 60 sec, and the step is 5 sec. Lets you select the aspect ratio of the screen. Choose from Normal, Wide, Cinema or Zoom. OSD Language OSD Timeout Screen Mode DPMS Use this setting when using your TV with a computer. When using a connected computer, lets the computer control if the screen is on or o. Caption Time Setup Lets you congure the system clock and time zone settings. You can also choose to enable the Date/Time features and set up the sleep timer. Lets you congure the settings for closed captioning (CC, also known as subtitles) in TV programs. Lets you reset all operational settings to their default factory value. Do this only if any of the following conditions occurs:

Reset Default

The system fails to respond to the remote control (make sure the remote control batteries are still working and that you are within the transmission range).

The new conguration settings cause unexpected results.

You forget the system PIN. Adjusting the picture 13 Lets you select certain channels to be blocked. Channel Block Program Block Input Block Lets you select certain input sources to be Lets you select certain programs to be blocked. Tuner Mode Lets you select the signal source for your TV Parental Change Password Clean All Channel Scan Channel Skip MTS TV Audio Language blocked. Lets you set a new password for parental controls. Eliminates all channels (and presets) stored in the TV.

(Antenna or Cable). Lets you initiate an automatic channel scan to set up the available channels in your TV. Lets you select certain channels to eliminate from the available channels list. Lets you enable the SAP (Second Audio Program) function. This lets you listen to a program using an alternative second language. Function availability depends on your TV provider. Lets you select the language track you prefer for viewing digital TV programs. Available options depend on your digital TV provider.

BrightnessLets you increase or decrease the brightness of the picture. Increasing the brightness can add more light to dark areas of the picture, while decreasing the brightness can add more darkness to light areas of the picture.

ContrastLets you increase or decrease the contrast of the picture. Increase the contrast to adjust the white areas of the picture or decrease the contrast to adjust the black areas of the picture.

SaturationLets you adjust the intensity of the colors.

HUELets you adjust the overall color of the picture (only supported in TV/AV mode).

SharpnessLets you increase the sharpness level for clearer images or decrease the sharpness level for smoother images.

Color Temperature Lets you change the color temperature. You can select the color temperature from three options: Cool, Standard, or Warm.

Advanced VideoLets you access and adjust advanced video settings, such as DNR, Adaptive Luma Control, Flesh Tone. 4 Press MENU to return to the previous menu, or press EXIT to close the menu. Choosing the display format (aspect ratio) To choose the display format:

Press ASPECT on the remote control repeatedly to cycle through the available display formats. Options include:

Normal Selects the correct aspect ratio to match the

Zoom Enlarges the picture but may crop the top and source image. bottom.

WideShows a full-screen picture.

CinemaStretches the picture at the edges [21:9 aspect], but maintains a good aspect ratio at the center of the screen. Note: Menu items that are not selectable are grayed out. Menus in this manual are described in TV mode, unless otherwise indicated. Adjusting the picture To adjust the picture:

1 Press MENU. The Main menu opens. 2 Press ENTER or

. The Video menu opens. Saturation HUE 3 Press or to highlight an option, then press or to adjust the option. You can select:

Picture ModeSelects the picture mode. You can select:

Vivid (a bright and vivid picture)

Standard (a standard picture)

Cinema (a nely detailed picture)

User (customized picture). Note: You can also press PICTURE on the remote control to select the picture mode. 14 Adjusting the sound Adjusting the sound To adjust the sound:

1 Press MENU. The Main menu opens. 2 Press to highlight Audio, then press ENTER or or Audio menu opens. The MTS 3 Press or to highlight an option, then press or to adjust the option. You can select:

Tuner Mode Lets you select Antenna or Cable.

Channel ScanLets you scan for channels that have signals and stores the channels information in memory. When you press CH or CH

, your TV skips any channels that do not have a signal.

Channel SkipLets you delete a channel stored in memory.

, your TV skips the channel When you press CH you deleted. You can still tune to the channel using the number buttons on the remote control. or CH

MTSLets you select the sound mode. You can select Mono, Stereo, or SAP (second audio program).

Audio Language Lets you select the audio language for a program (if other languages are available). 4 Press MENU to return to the previous menu, or press EXIT to close the menu. Setting parental controls Parental controls let you prevent your children from watching inappropriate material on TV. When set, parental controls read the rating of the program (with some exceptions, such as news and sports) and deny access to programs that exceed the ratings level you select. To watch programs that exceed the selected rating, you must enter a password. To set parental controls:

1 Press MENU. The Main menu opens. 2 Press or to highlight Parental, then press ENTER or

. The Parental menu opens. 3 Press or to highlight an option, then press or to adjust the option. You can select:

BalanceAdjusts the balance between the left and right audio channels. o.

Surround Sound Turns the surround sound eect on or

EqualizerLets you select the frequency you want to adjust and change its value.

SPDIF TypeLets you select the preferred audio format for SPDIF audio signals. SPDIF is only available on digital channels or when using an HDMI device. Choose from PCM, Dobly Digital, or O. Note: By selecting SPDIF Type, you can choose the digital audio output type.

Auto Volume ControlLets you turn automatic volume control on or o. When this option is turned on, it keeps the audio in a preset range to eliminate large spikes in volume. 4 Press MENU to return to the previous menu, or press EXIT to close the menu. Selecting the audio mode To select the audio mode:

Press SOUND on the remote control one or more times to cycle through the available sound modes. Options include Standard, Speech, User, and Music. Changing channel settings To change the channel settings:

1 Press MENU. The Main menu opens. 2 Press to highlight TV, then press ENTER or or

. The TV menu opens. Adjusting TV settings 15 3 Press the number buttons to enter the four-digit password. The default password is 0000. You should change the password to a number you can remember. The Parental Controls menu opens. 4 Press or to highlight an option, then press or to adjust the option. You can select:

Change PasswordLets you change the password. The rst time you use this function, use the default password (0000). If you want to change it, rst enter the new password then enter the same password again.

Channel BlockLets you block any channel you select.

Input BlockLets you block the input source with this function. For example, if you want to block AV input, highlight AV, then press ENTER.The AV input will be blocked.

Program Block

ARating Enable is on.

BU.S. TV Ratings: You can choose TV ratings according to the illustration on the screen.

CThe settings for U.S. Movie Ratings, Canada (English) Ratings, and Canada (French) Ratings follow Step B. If you want to block an unrated program, turn on this function. You can select all the ratings listed in the charts below. Note: On the MPAA RATING screen, press or to select the rating. That rating and all other higher ratings are blocked. U.S. TV ratings (age-based) These ratings are determined by the Federal Communications Commission (FCC). TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA All children. Suitable for children 7 and older. General audiences. Parental guidance suggested. Parental guidance strongly suggested. Mature audiences only. U. S. TV ratings (content-based) FV V S L D Fantasy violence. Violence. Sexual situations. Strong language. Suggestive dialog. U.S. movie (MPAA) ratings These ratings are determined by the Motion Picture Association of America (MPAA). G PG PG-13 R General audiences. Parental guidance suggested. Suitable for children 13 and older. Parental guidance suggested for children under 17. Not suitable for children under 17. Adults only. NC-17 X Canadian English ratings These ratings are based on the Canadian Home Video Rating System, determined by the Canadian Motion Picture Distributors Association (CMPDA). C C8+

G PG 14+

18+

Suitable for all children. Suitable for children 8 and older. General audiences. Parental guidance suggested. Suitable for children 14 and older. Adults only. Canadian French ratings These ratings are based on the classication categories determined by La Rgle du cinma du Qubec. G 8 ans+

13 ans+

16 ans+

18 ans+

General audiences. Suitable for children 8 and older. Suitable for children 13 and older. Suitable for children 16 and older. Adults only. 5 Press EXIT to close the menu. Adjusting TV settings To adjust the setup:

1 Press MENU. The Main menu opens. 2 Press to highlight Setup, then press ENTER or or

. The Setup menu opens. OSD Timeout 15sec 3 Press or to highlight an option, then press or to adjust the option. You can select:

OSD LanguagePress the right or left arrow buttons to choose the OSD Language. Choices include English, Spanish, and French.

OSD TimeoutLets you set the OSD timeout. You can select the time from 5 sec to 60 sec, and the step is 5 sec.

Screen ModePress the arrow buttons to choose the screen aspect ratio. Choices include Normal, Wide, or Cinema to Zoom. You can also press the Aspect button on your remote control.

DPMSUse this setting with a computer. When DPMS is on, the computer controls whether the screen is on or o. For example, if the computer is in sleep mode, the screen is switched o. If the computer is activated, the screen also is activated.

Time SetupLets you set the exact time. You can also set up Sleep Timer and Auto Sleep Time . 16 Troubleshooting

CaptionLets you set up closed captions. Choose from Analog Closed Caption, Digital Closed Caption, and Digital Caption Style.

Analog Closed CaptionCC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, and TEXT4.

Digital Closed CaptionService1, Service2, Service3, Service4, Service5, and Service6.

Digital Caption StyleThere are two digital caption styles. One is the automatic function set by the broadcaster, and the other is the custom style where you can adjust the font size, color, opacity, background color, and so on.

Reset DefaultResets the TV to its original factory settings. 4 Press MENU to return to the previous menu, or press EXIT to close the menu. Troubleshooting Problem Double images. The picture has a few bright or dark spots. Good picture, but no sound. Audio noise. Solution

Try using a highly directional outdoor antenna or cable TV.

A few bright or dark spots on an LCD screen is normal. It does not aect the operation of this TV.

Make sure that the sound is not muted.

Make sure that the sound mode is set to Stereo or Mono. For more information, see Selecting the audio mode on page 14.

Make sure that there is no interference with infrared equipment such as a cordless telephone or headphones. Move the infrared equipment away from the TV to eliminate the noise. Before calling for service, check the following information for possible solutions to problems you may experience. If none of these solutions work, turn o the TV, then turn it on again. Caution: Do not try to repair the TV yourself. Refer all servicing to qualied repair personnel. Remote control Problem Solution

Make sure that the TV power cord is plugged in.

Make sure that there are no obstructions between the remote control and the remote control sensor on the front of the TV.

Make sure that the batteries are installed correctly. For more information, see Installing remote control batteries on page 6.

Replace the batteries. For more information, see Installing remote control batteries on page 6. Video and audio Remote control does not work. Problem Solution No picture (screen is not lit) and no sound.

Make sure that the power cord is plugged in. Dark, poor, or no picture

(screen is lit), but sound is good.

Press POWER remote control. on the TV or the

Make sure that the correct video input source is selected. For more information, see Selecting the video input source on page 11.

Try another channel. The station may be experiencing problems.

Adjust the brightness. For more information, see To adjust the picture: on page 13.

Make sure that the correct picture mode is selected. For more information, see To adjust the picture: on page 13.

Make sure that the antenna or cable TV is connected correctly and securely. For more information, see Connecting an antenna, cable TV, or satellite TV box on page 9. No color, dark picture, or color is not correct. Only snow (noise) appears on the screen. Dotted lines or stripes appear on the screen.

Adjust the color saturation. For more information, see Adjusting the picture on page 13.

Try another channel. The station may be experiencing problems.

Make sure that the antenna or cable TV is connected correctly and securely. For more information, see Connecting an antenna, cable TV, or satellite TV box on page 9.

Adjust the antenna.

Move the TV away from noise sources such as cars, neon signs, or hair dryers. 17 Audio multiples BTSC system Audio out 8W x 2 Power requirement AC 120 V, 60 Hz Power consumption Dimensions

(W H D with stand) Weight 215W 44.06 29.51 11.65inches

(1119 749.5 296 46.30 lbs. (21 kg) mm) Input terminals Composite video/L and R audio (1) Component video/L and R audio (1) HDMI (2) VGA and PC/DVI audio (1) ANT/Cable (1) Output terminals Digital Coaxial Audio (1) Control terminals Headphone (1) SERVICE PORT (1) Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

Consult the dealer or an experienced technician for help. FCC warning Changes or modications not expressly approved by the party responsible for compliance with the FCC Rules could void the users authority to operate this equipment. Cables Connections to this device must be made with shielded cables with metallic RF/EMI connector hoods to maintain compliance with FCC Rules and Regulations. Maintenance General Problem Solution One or more channels do not display. Password is lost. Some settings cannot be accessed. TV cabinet creaks. Control buttons on the TV do not work.

Make sure that the channels are not blocked. For more information, see Setting parental controls on page 14.

Enter 0532 to access parental controls, then set a new password. For more information, see Setting parental controls on page 14.

If a setting is grayed, the setting is not available in the current video input mode.

When the TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction.

Disconnect the power cord, wait a few seconds, then reconnect the power cord and turn on the TV. Note: If the problem is not solved by using these troubleshooting instructions, try turning o your TV, then turning it on again. Maintenance Just like with any other household appliance, the performance and life-expectancy of your TV depends on how well you maintain it. Follow the procedures described here to clean the TV case and the LCD screen. Cautions:

Make sure that the TV is turned o and the power cord is disconnected from the power outlet before cleaning the TV.

Never spray or pour any liquid directly onto the screen or the case. Cleaning

Clean your TV with a soft, dry cloth. If surfaces are extremely dirty, use a soft cloth dampened with a small amount of non-ammonia, non-alcohol-based, non-abrasive detergent solution.

Clean the screen with a clean, soft, lint-free cloth. If additional cleaning is necessary, apply a small amount of non-ammonia, non-alcohol-based, non-abrasive detergent solution to the cloth. Specications Specications subject to change without notice. Weight and dimensions shown are approximate. LCD 46-inch FHD LCD TV type TV panel TV system NTSC-M, ATSC Receiving channels VHF: 2 - 13 UHF: 14 - 69 CATV: 1 - 125 CADTV: 1-135 DTV: 2-69 18 Legal notices