T PRO FLIP 2.4 ser Manual is pamphlet carefully in order to make your phone in perfect condition. Our company may change this mobile phone without prior written notice and reserves the final right to interpret the performance of this mobile phone. Due to different software and network operators, display on your phone may be to your phone for detai If your phone has lost or been stolen, notify the telecommunication office the SIM card is disabled (network support is required). This can avoid economic loss caused by unauthorized use. Please take measures as following to avoid your phone being unauthorized use:
+ Set PIN code of SIM card
+ Set Phone password 1.3 Safety warning and Attentions Safety warning
> ROAD SAFETY COMES FIRST Donot use a hand-held phone while driving. use hands-free fittings when calls are unavoidable while driving. In some countries, dialing or receiving calls while driving is illegal!
> SWITCH OFF IN AIRCRAFT devices can cause interference in aircraft. Using a mobile phone in legal and risky. Please make sure that your mobile phone is powered off in flight.
> SWITCH OFF BEFORE ENTERING RISKY AREAS Strictly observe the relevant laws, codes, and regulations on the use of mobile phones in risky areas. Turn off your mobile phone before entering a place susceptible to explosion, such as an oil station, oil tank, chenmical plant or a place where a blasting process is under w:
> OBSERVE ALL SPECIAL REGULATIONS Follow any special regulations in force in any area such as hospitals and always switch off your phone whenever it is forbidden to use it or, when it may cause imerference or danger. Properly use your mobile phone near medical apparatuses, such as pacemakers, hearing aids and some other electro medical devices, as it may cause interference to such apparatuses.
> INTERFERENCE The conversation quality of any mobile phone may be affected by radio interference. An antenna is built inside the mobile phone and located below the microphone. Do not touch the antenna area during a conversation, lest that the coversation quality deteriorate.
> QUALIFIED SERVICE Only qualified personnel may install or repair phone equipment. Installing or 1 repairing the mobile phone on your own may bring great danger and violates the warranty rules.
> ACCESSORIES AND BATTERIES Use only approved accessories and bateries.
> USE SENSIBLY Use only in a normal and proper manner.
> EMERGENCY CALLS Ensure the phone is switched on and in service, enter the emergency number, 112, then e your location and state your situation briefly. Do not end the call until told to do so. Note: Just like all other mobile phones, this mobile phone does not necessarily support all the features described in this manual due to network or radio transmission problems. Some networks even do not support the emergency call service Therefore, do not rely solely on the mobile phone for critical communications such as first aid. Please consuly the local network operator. Precautions This mobile phone is well designed with fine art. Please exercise special care when using it, The following suggestions will help your mobile phone survive the warranty period and extend its servi
> Keep the mobile phone and all its fittings beyond children's reach.
> Keep the mobile phone dry. Keep away from rain, moisture, liquid or other substances that may corrode electronic circuits,
> Do not use or store the mobile phone in dusty places, lest that active parts of the mobile phone be damaged.
% Do not store the mobile phone in a high-temperature place. High temperature will shorten the life of electronic circuits and damage the battery and some plastic parts.
> Donot store the mobile phone in a chilly place, Otherwise, moistures will be formed inside the mobile phone to damage electronic circuits when the mobile phone is moved to a constant temperature place.
> Do not throw, knock or shock the mobile phone, as that will destroy the internal circuits and high-preci 1.4 Functions of Keys The mobile phone provides the following keys SIMI dial Key Press it to originate a call on SIM card 1 by entering the called number or selecting a contact from the phonebook; or press it to receive an incoming call; or press it in standby state to show the latest call records SIM2 dial Key press it to originate a call on SIM card 2 by entering the called number or selecting a contact from the phonebook; or press it to receive an incoming or press it in standby state to show the latest call records. 2 components of the mobile phone.
@ Left and right soft The bottom line of soft key Direction key Press them to scrol press direction key Audio player shor Press this key in id TV shorteut key In idle screen, pres OK key Press it to confirm Delete key Press it to delete a Linefeed This key helps to interface. Ctrl key Press this key tos oe ee @
Shift key 1.5 Technical speci Phone Dimensions (WxDxH) Lithium battery:BL-SC Rated capacity: 1000M Continuous standby du Continuous conversat Please refer to their lat 1.6 Installing the An SIM card carries us PIN (Personal Identific
(PIN2 Unlocking key), network information, contacts key n the screen displays the functions of the Left and Right the options when browsing a function b ys to navigate. routs key ile screen to access audio player interface. In edit state, ss it can access TV interface your selection, character before cursor. switch to another line when the interface is in the edit witch between input methods interface to get a blank. In idle interface, long press 1 on/off torch which situates at the top of the phone. interface to input a symbol. fications
)985313.5 mm AH station: 2008 on duration: 8H bels for other data related to the battery and the charger. IM Cards and the battery phone number, ing Key), PUK2
. IMSI (International Mobile Subscriber Identity), data, and short messages data. Do not place the battery in fire ; follow local laws and ordinances in Disposing used battery. Check the model number of the charger before using it to char Only use approved battery , charger and accessories app!
specific mobile model . Using other types of battery , charger and accessories may violate the certification or warranty terms of the accessories ate the certification or warranty terms of the equipment and may in danger . Return waste and used batteries to the supplier or specified recovery CAUTION!
Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions . FCC Warning Specific Absorption Rate (SAR) information SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at highest certified power level in all tested frequency bands, although the SAR, is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value, in general, the closer you are to a wireless base station antenna, the lower the power output. Before a new model phone is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each phone are performed in positions and locations (e.g. at the ear and worn on the body)as required by the FCC. For body worn operation, this mobile phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 1.0cm from the body. part 15 of the FCC Rules. Operation is subject to the
) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 4 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Thest are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not in:
instructions, may cause harmful However, there is no guarantee that installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
> Reorient or relocate the receiving antenna.
> Increase the separation between the equipment and receiver.
> Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
> Consult the dealer or an experienced radio/TV technician for help.