FCC ID: B94HNC04PKCP2 Model HSN-C04C PC

by: HP Inc. latest update: 2019-09-27 model: HNC04PKCP2

Ten grants have been issued under this FCC ID from 09/13/2019 to 09/27/2019 (this is one of one hundred and ninety-eight releases in 2019 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked warrantee terms, instructions, password defaults, troubleshooting guides, & drivers.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various User Manual Users Manual pdf 4.02 MiB September 27 2019 / March 25 2020 delayed release
various Cover Letter(s) pdf September 27 2019
various Block Diagram Block Diagram pdf September 27 2019 confidential
various Cover Letter(s) pdf September 27 2019
various Description Antenna INPAQ WLAN Operational Description pdf September 27 2019 confidential
various Description Antenna INPAQ WWAN Operational Description pdf September 27 2019 confidential
various Description TAS Operational Report Operational Description pdf September 27 2019 confidential
various Description TAS Validation Report Operational Description pdf September 27 2019 confidential
various Description WLAN Dynamic SAR Operational Description pdf September 27 2019 confidential
various Cover Letter(s) pdf October 03 2019
various External Photos External Photos pdf September 27 2019 / March 25 2020 delayed release
various Internal Photos Internal Photos pdf September 27 2019 / March 25 2020 delayed release
various Attestation Statements pdf September 27 2019
various ID Label/Location Info pdf September 27 2019
various Cover Letter(s) pdf September 27 2019
various Operation Dynamic WLAN SAR Operational Description pdf September 12 2019 confidential
various Cover Letter(s) pdf September 27 2019
various Cover Letter(s) pdf September 13 2019
various RF Exposure Info pdf September 27 2019
various RF Exposure Info pdf September 27 2019
various RF Exposure Info pdf September 27 2019
various RF Exposure Info pdf September 27 2019
various Schematics Schematics pdf September 27 2019 confidential
various Cover Letter(s) pdf September 12 2019
various TAS Operational Report Operational Description pdf September 12 2019 confidential
various Test Report pdf September 27 2019
various Test Report pdf December 09 2019
various Test Setup Photos SAR Test Setup Photos pdf September 27 2019 / March 25 2020 delayed release
various ID Label/Location Info pdf December 09 2019
various Operational Dynamic WLAN SAR Operational Description pdf September 12 2019 confidential
various Attestation Statements pdf December 09 2019
various TAS Validation Report Operational Description pdf September 12 2019 confidential
various Test Report pdf September 27 2019
various Test Report pdf September 27 2019
various Descritpion Antenna Inpaq WLAN Operational Description pdf September 27 2019 confidential
various Descritpion Antenna Inpaq WWAN Operational Description pdf September 27 2019 confidential
various Operational Description Dynamic WLAN SAR Operational Description pdf September 12 2019 confidential
various Cover Letter(s) pdf December 09 2019
various Test Report pdf September 27 2019
various Test Setup Photos Test Setup Photos pdf September 27 2019 / March 25 2020 delayed release
various Internal Photo Revisede Internal Photos pdf September 12 2019 / March 09 2020 delayed release
various Parts List Parts List/Tune Up Info pdf September 27 2019 confidential
various RF Exposure Info pdf September 27 2019
various Test Report pdf September 27 2019
various Test Report pdf September 27 2019
various Test Setup Photos Radiated Test Setup Photos pdf September 27 2019 / March 25 2020 delayed release
various Description Antenna Operational Description pdf September 12 2019 confidential
various Test Report pdf December 09 2019
various Test Report pdf September 27 2019
various Test Report pdf September 27 2019
various Test Report pdf September 27 2019
various Test Report pdf September 27 2019
various User Manual Users Manual pdf 4.02 MiB September 27 2019 / March 25 2020 delayed release

frequency equipment class purpose
1 2019-09-27 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Original Equipment
2 2412 ~ 2472 DTS - Digital Transmission System
3 JBP - Part 15 Class B Computing Device Peripheral
4 2572.5 ~ 2617.5 PCB - PCS Licensed Transmitter
5 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
6 2019-09-13 2572.5 ~ 2617.5 PCB - PCS Licensed Transmitter
7 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
8 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 2412 ~ 2472 DTS - Digital Transmission System
10 JBP - Part 15 Class B Computing Device Peripheral

Application Forms

app s Applicant Information
various Effective 2019-09-27
various 2019-09-13
various Applicant's complete, legal business name HP Inc.
various FCC Registration Number (FRN) 0025126541
various Physical Address 3390 East Harmony Road
various Fort Collins, CO
various United States
app s TCB Information
various TCB Application Email Address h******@acbcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
various B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
app s FCC ID
various Grantee Code B94
various Equipment Product Code HNC04PKCP2
various HNC04PKCP2
app s Person at the applicant's address to receive grant or for contact
various Name R******** P******** T****
various Title US Canada Technical Regulations
various Telephone Number 970-8********
various Fax Number 000-0********
various E-mail r******@hp.com
app s Technical Contact
various Firm Name HP Inc.
various Name J**** C******
various Physical Address 1501 Page Mill Road
various Palo Alto, California 94304
various Palo Alto, 94304
various United States
various Telephone Number 27192********
various E-mail j******@hp.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)03/25/2020
various03/09/2020
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDSS - Part 15 Spread Spectrum Transmitter
variousDTS - Digital Transmission System
variousJBP - Part 15 Class B Computing Device Peripheral
variousPCB - PCS Licensed Transmitter
variousNII - Unlicensed National Information Infrastructure TX
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Model HSN-C04C PC
variousLTE Module
variousIntel Wireless -AX200
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?Yes
variousModular Equipment TypeLimited Single Modular Approval
variousDoes not apply
variousPurpose / Application is forOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is conducted. Limited Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.49W/kg respectively. SAR testing was performed to demonstrate mobile/portable RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Limited Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This device has 20 and 40 MHz bandwidth modes. The highest reported Body and Simultaneous SAR values are 0.92W/kg and 1.49W/kg respectively. SAR testing was performed to demonstrate mobile/portable RF compliance.
variousLimited Modular Approval. Output power is ERP for Part 22, Part 27(Below 1 GHz) and Part 90; EIRP for Part 24 and Part 27 (Above 1 GHz). This grant is valid only when the module is sold to OEM integrator and must be installed by the OEM or OEM integrator. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrator and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.49W/kg respectively. SAR Testing was performed to demonstrate mobile/portable RF compliance.
variousPower Output listed is conducted. Limited Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and 1.49W/kg respectively. SAR testing was performed to demonstrate mobile/portable RF compliance.
variousLimited Modular Approval. Output power is ERP for Part 22, Part 27(Below 1 GHz) and Part 90; EIRP for Part 24 and Part 27 (Above 1 GHz). This grant is valid only when the module is sold to OEM integrator and must be installed by the OEM or OEM integrator. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrator and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.49W/kg respectively. SAR Testing was performed to demonstrate mobile/portable RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and 1.49W/kg respectively. SAR testing was performed to demonstrate mobile/portable RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.49W/kg respectively. SAR testing was performed to demonstrate mobile/portable RF compliance.
variousPower Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This device has 20 and 40 MHz bandwidth modes. The highest reported Body and Simultaneous SAR values are 0.92W/kg and 1.49W/kg respectively. SAR testing was performed to demonstrate mobile/portable RF compliance.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name RF Exposure Lab, LLC
various Name T****** M****
various Telephone Number 760 4********
various E-mail t******@rfexposurelab.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.009
2 2 15C CC MO 2412 2472 1
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 22H 826.4 846.6 0.211 0.1 ppm 4M08F9W
4 2 22H 824.7 848.3 0.244 0.1 ppm 8M93G7D
4 3 22H 824.7 848.3 0.2 0.1 ppm 8M95W7D
4 4 22H 824.7 848.3 0.239 0.1 ppm 13M5G7D
4 5 22H 824.7 848.3 0.157 0.1 ppm 13M5W7D
4 6 24E 1852.4 1907.6 0.237 0.1 ppm 4M11F9W
4 7 24E 1850.7 1909.3 0.196 0.1 ppm 2M71W7D
4 8 24E 1850.7 1909.3 0.241 0.1 ppm 18M0G7D
4 9 24E 1850.7 1909.3 0.156 0.1 ppm 18M0W7D
4 1 24E 1850.7 1914.3 0.247 0.1 ppm 17M9G7D
4 11 24E 1850.7 1914.3 0.199 0.1 ppm 17M9W7D
4 12 24E 1850.7 1914.3 0.158 0.1 ppm 17M9W7D
4 13 27 699.7 715.3 0.248 0.1 ppm 4M47G7D
4 14 27 699.7 715.3 0.247 0.1 ppm 8M97G7D
4 15 27 699.7 715.3 0.199 0.1 ppm 8M97W7D
4 16 27 779.5 784.5 0.249 0.1 ppm 4M46G7D
4 17 27 779.5 784.5 0.247 0.1 ppm 8M89G7D
4 18 27 779.5 784.5 0.195 0.1 ppm 8M89W7D
4 19 27 706.5 713.5 0.184 0.1 ppm 8M93G7D
4 2 27 706.5 715.3 0.154 0.1 ppm 8M93W7D
4 21 27 706.5 715.3 0.12 0.1 ppm 8M93W7D
4 22 27 1710.7 1779.3 0.198 0.1 ppm 13M6W7D
4 23 27 1710.7 1779.3 0.242 0.1 ppm 18M0G7D
4 24 27 1710.7 1779.3 0.196 0.1 ppm 18M0W7D
4 25 27 1710.7 1754.3 0.196 0.1 ppm 8M93G7D
4 26 27 1710.7 1754.3 0.194 0.1 ppm 17M9G7D
4 27 27 1710.7 1754.3 0.166 0.1 ppm 17M9W7D
4 28 27 1712.4 1752.6 0.21 0.1 ppm 4M08F8W
4 29 27 2307.5 2312.5 0.167 0.1 ppm 4M48W7D
4 3 27 2307.5 2312.5 0.198 0.1 ppm 8M93G7D
4 31 27 2307.5 2312.5 0.165 0.1 ppm 8M95W7D
4 32 27 2502.5 2567.5 0.246 0.1 ppm 13M5G7D
4 33 27 2502.5 2567.5 0.24 0.1 ppm 18M0G7D
4 34 27 2502.5 2567.5 0.199 0.1 ppm 18M0W7D
4 35 27 2572.5 2617.5 0.221 0.1 ppm 18M5G7D
4 36 27 2572.5 2617.5 0.175 0.1 ppm 8M99W7D
4 37 27 2572.5 2617.5 0.216 0.1 ppm 18M0G7D
4 38 27 2572.5 2617.5 0.14 0.1 ppm 18M0W7D
4 39 27 2498.5 2687.5 0.396 0.1 ppm 18M0G7D
4 4 27 2498.5 2687.5 0.344 0.1 ppm 18M0W7D
4 41 9 790.5 795.5 0.245 0.1 ppm 4M49G7D
4 42 9 790.5 795.5 0.194 0.1 ppm 4M49W7D
4 43 9 790.5 795.5 0.238 0.1 ppm 8M93G7D
4 44 9 790.5 795.5 0.185 0.1 ppm 8M95W7D
4 45 9 814.7 823.3 0.191 0.1 ppm 1M10W7D
4 46 9 814.7 823.3 0.232 0.1 ppm 8M97G7D
4 47 9 814.7 823.3 0.188 0.1 ppm 8M97W7D
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC MO 5180 5250 0.188
5 2 15E CC MO 5260 5320 0.193
5 3 15E CC MO 5500 5720 0.201
5 4 15E CC MO 5745 5825 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 22H 826.4 846.6 0.211 0.1 ppm 4M08F9W
6 2 22H 824.7 848.3 0.244 0.1 ppm 8M93G7D
6 3 22H 824.7 848.3 0.2 0.1 ppm 8M95W7D
6 4 22H 824.7 848.3 0.239 0.1 ppm 13M5G7D
6 5 22H 824.7 848.3 0.157 0.1 ppm 13M5W7D
6 6 24E 1852.4 1907.6 0.237 0.1 ppm 4M11F9W
6 7 24E 1850.7 1909.3 0.196 0.1 ppm 2M71W7D
6 8 24E 1850.7 1909.3 0.241 0.1 ppm 18M0G7D
6 9 24E 1850.7 1909.3 0.156 0.1 ppm 18M0W7D
6 1 24E 1850.7 1914.3 0.247 0.1 ppm 17M9G7D
6 11 24E 1850.7 1914.3 0.199 0.1 ppm 17M9W7D
6 12 24E 1850.7 1914.3 0.158 0.1 ppm 17M9W7D
6 13 27 699.7 715.3 0.248 0.1 ppm 4M47G7D
6 14 27 699.7 715.3 0.247 0.1 ppm 8M97G7D
6 15 27 699.7 715.3 0.199 0.1 ppm 8M97W7D
6 16 27 779.5 784.5 0.249 0.1 ppm 4M46G7D
6 17 27 779.5 784.5 0.247 0.1 ppm 8M89G7D
6 18 27 779.5 784.5 0.195 0.1 ppm 8M89W7D
6 19 27 706.5 713.5 0.184 0.1 ppm 8M93G7D
6 2 27 706.5 713.5 0.154 0.1 ppm 8M93W7D
6 21 27 706.5 713.5 0.12 0.1 ppm 8M93W7D
6 22 27 1710.7 1779.3 0.198 0.1 ppm 13M6W7D
6 23 27 1710.7 1779.3 0.242 0.1 ppm 18M0G7D
6 24 27 1710.7 1779.3 0.196 0.1 ppm 18M0W7D
6 25 27 1710.7 1754.3 0.196 0.1 ppm 8M93G7D
6 26 27 1710.7 1754.3 0.194 0.1 ppm 17M9G7D
6 27 27 1710.7 1754.3 0.166 0.1 ppm 17M9W7D
6 28 27 1712.4 1752.6 0.21 0.1 ppm 4M08F8W
6 29 27 2307.5 2312.5 0.167 0.1 ppm 4M48W7D
6 3 27 2307.5 2312.5 0.198 0.1 ppm 8M93G7D
6 31 27 2307.5 2312.5 0.165 0.1 ppm 8M95W7D
6 32 27 2502.5 2567.5 0.246 0.1 ppm 13M5G7D
6 33 27 2502.5 2567.5 0.24 0.1 ppm 18M0G7D
6 34 27 2502.5 2567.5 0.199 0.1 ppm 18M0W7D
6 35 27 2572.5 2617.5 0.221 0.1 ppm 18M5G7D
6 36 27 2572.5 2617.5 0.175 0.1 ppm 8M99W7D
6 37 27 2572.5 2617.5 0.216 0.1 ppm 18M0G7D
6 38 27 2572.5 2617.5 0.14 0.1 ppm 18M0W7D
6 39 27 2498.5 2687.5 0.396 0.1 ppm 18M0G7D
6 4 27 2498.5 2687.5 0.344 0.1 ppm 18M0W7D
6 41 9 790.5 795.5 0.245 0.1 ppm 4M49G7D
6 42 9 790.5 795.5 0.194 0.1 ppm 4M49W7D
6 43 9 790.5 795.5 0.238 0.1 ppm 8M93G7D
6 44 9 790.5 795.5 0.185 0.1 ppm 8M95W7D
6 45 9 814.7 823.3 0.191 0.1 ppm 1M10W7D
6 46 9 814.7 823.3 0.232 0.1 ppm 8M97G7D
6 47 9 814.7 823.3 0.188 0.1 ppm 8M97W7D
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E CC MO 5180 5250 0.188
7 2 15E CC MO 5260 5320 0.193
7 3 15E CC MO 5500 5720 0.201
7 4 15E CC MO 5745 5825 0.212
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402 2480 0.009
9 2 15C CC MO 2412 2472 1
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15B

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC