| submitted | available | document details (if available) | source link |
|---|---|---|---|
| December 27 2016 | December 27 2016 | 产品规格书 zy Adobe Acrobat Pro 9.3.0 |
| various | User Manual | Users Manual | 1.05 MiB | December 27 2016 |
PRODUCT SPECIFICATION Version 2.0 IEEE 802.11 b/g/n 1T/1R USB Module Model Number: W7LM1110 / W7LM1110A Custom Approval Section Custom Name Department Approval Date DESIGN CHECK 2016-11-24 2016-11-24 APPROVAL 2016-11- 24
:
Manufacturer: HUIZHOU GAOSHENGDA TECHNOLOGY CO.,LTD 75 HUA YU RD., NO.75, ZHONGKAI HIGH-TECH DEVELOPMENT AREA, HUIZHOU, CHINA TEL07522096698 FAX07522096628 E-mail zhuxh@gaosd.cn PRODUCTS SPECIFICATION W7LM1110 Document revision history Revision Date Approved by Remarks Version 1.0 2016-09-23 Version 1.1 2016-09-29 Version 1.2 2016-09-30 Version 1.3 Version 1.4 2016-09-30 2016-10-03 Version 1.5 2016-10-11 Draft Updateadd Schematic diagram add label list &Package add Appendix 4 Updateadd FCC ID/IC ID UpdateOperating Voltage Module label/picture UpdateModule picture UpdateAppendix 5Reliability test report Appendix6Salt spray test report Model test report Version 1.6 2016-10-14 Updateadd Appendix 7: PCB Information Version 1.7 2016-10-20 Version 1.8 2016-10-27 Version 1.9 2016-11-01 Version 2.0 2016-11-24 UpdateMechanical Dimensions Update1.25mm*8PIN SMT connector Part List Add IPEX Connector Module picture UpdateMechanical Dimensions UpdatePackage PAGE 2 OF 19 Version2.0 1. 2. PRODUCTS SPECIFICATION W7LM1110 General Description This document is to specify the product requirements for 802.11 b/g/n USB Module.This Module is based on Media Tek MT7601U chipset that complied with IEEE 802.11g, IEEE 802.11b, IEEE 802.11n standard from 2.4G-2.5GHz,and it can be used to provide up to 54Mbps for 802.11g,11Mbps for 802.11b and 150Mbps for 802.11n to connect your wireless LAN. With seamless roaming, fully interoperability and advanced security with WEP standard, 802.11b/g/n USB Module offers absolute interoperability with different vendors 802.11 b, 802.11 g, 802.11n Access Points through the wireless LAN. Features Compatible with IEEE 802.11b standard to provide wireless 11Mbps data rate. Compatible with IEEE 802.11g standard to provide wireless 54Mbps data rate. Compatible with IEEE 802.11n standard to provide wireless 150Mbps data rate. Operation at 2.4G-2.5GHz frequency band to meet worldwide regulations Supports WEP ,WPA ,WPA2,TKIP,AES enhanced security Drivers support Windows XP 32/64, 2000, 7,Vista 32/64, Linux OS High speed USB 2.0 interface RoHS compliant PAGE 3 OF 19 Version2.0 PRODUCTS SPECIFICATION 3. 3.1 Application Diagrams FunctionalBlockDiagram DC/DC 3.3V 5V W7LM1110 U S B Interface Signals MT7601U WL/2.4G/ Tx/Rx Antenna I n t e r f a c e 40MHz XTAL 3.2 Schematicdiagram PAGE 4 OF 19 Version2.0 PRODUCTS SPECIFICATION W7LM1110 4. GeneralRequirements 4.1 IEEE 802.11b Section
#
Feature Standard Radio and Modulation Schemes Operating Frequency Channel Numbers Data Rate Media Access Protocol Transmitter Output Power at Antenna Connector Receiver Sensitivity at Antenna Connector Feature Standard Radio and Modulation Type Operating Frequency Channel Numbers Data Rate Media Access Protocol Transmitter Output Power at Antenna Connector Receiver Sensitivity at Antenna Connector 4.1.1 4.1.2 4.1.3 4.1.4 4.1.5 4.1.6 4.1.7 4.1.8 4.2.1 4.2.2 4.2.3 4.2.4 4.2.5 4.2.6 4.2.7 4.2.8 IEEE 802.11g Section 4.2
#
Detailed Description IEEE 802.11b DQPSK , DBPSK , DSSS , and CCK 2400 2497MHz ISM band 11 channels for United States 13 channels for Europe Countries(Default) 14 channels for Japan 11,5.5,2,and 1Mbps CSMA/CA with ACK Typical RF Output Power at each RF chain,Data Rate and at room Temp. 25degree C 171.5dBm at 11Mbps Typical Sensitivity at Which Frame(1000-byte PDUs)Error Rate=8% at room Temp 25 degree C
-90 dBm at 2Mbps
-81 dBm for 11Mbps Detailed Description IEEE 802.11g QPSK , BPSK , 16QAM ,64QAM with OFDM 2400 2483.5MHz ISM band 11 channels for United States 13 channels for Europe Countries(Default) 13 channels for Japan 6,9,12,18,24,36,48,54Mbps CSMA/CA with ACK Typical RF Output Power(tolerance1.5dBm) at each RF chain, Data Rate and at roomTemp. 25 degree C 141.5 dBm at 54Mbps Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate=10% at room Temp 25 degree C
-87 dBm at 6Mbps
-86 dBm at 9Mbps
-84 dBm at 12Mbps
-82 dBm at 18Mbps
-80 dBm at 24Mbps
-76 dBm at 36Mbps
-72 dBm at 48Mbps
-71 dBm at 54Mbps PAGE 5 OF 19 Version2.0 PRODUCTS SPECIFICATION W7LM1110 Detailed Description IEEE 802.11n BPSK , QPSK , 16QAM ,64QAM with OFDM 2400 2483.5MHz MCS GI=800ns 20MHz 40MH 1
.5 27 40.5 54 81 108 121.5 135 GI=400ns 20M z 7. 14.4 21.7 28. 43.3 57.8 65.0 72.2 40MHz 15 3 4 60 90 120 135 150 6.5 13 19.5 26 39 52 58.5 65 CSMA/CA with ACK Typical RF Output Power(tolerance1.5dBm) at each RF chain,Data Rate and at roomTemp. 25degree C 141.5dBm at MCS7 141.5dBm at MCS7 Typical Sensitivity Rate=10% at roomTemp. 25degree C at Which Frame(1000-byte PDUs)Error 4.3 IEEE 802.11n Section
#
4.3.1 4.3.2 4.3.3 Feature Standard Radio and Modulation Type Operating Frequency 4.3.4 Data Rate(Mbps) 4.3.5 Media Access Protocol 4.3.6 Transmitter Output Power at Antenna Connector 4.3.7 Receiver Sensitivity at Antenna Connector 0 1 2 4 5 6 7 HT-20 HT-40 HT-20
-87dBm at MCS0/8
-84dBm at MCS1/9
-82dBm at MCS2/10
-79dBm at MCS3/11
-76dBm at MCS4/12
-72dBm at MCS5/13
-70dBm at MCS6/14
-69dBm at MCS7/15
-84dBm at MCS0/8
-81dBm at MCS1/9
-80dBm at MCS2/10
-76dBm at MCS3/11
-73dBm at MCS4/12
-69dBm at MCS5/13
-68dBm at MCS6/14
-66dBm at MCS7/15 HT-40 PAGE 6 OF 19 Version2.0 PRODUCTS SPECIFICATION W7LM1110 5Electrical and Thermal Characteristics 5.1 EEPROM Information Reg Domain Vendor Product ID ID Worldwide Configured by driver Offset 0x38 for 5G:0xFF Offset 0x39 for 2.4G:0xFF 0x148F 0x7601 5.2 Temperature Limit Ratings Minimum Parameter Storage Temperature Storage Relative Humidity Operating ambient Temperature Operating Relative Humidity Note: The above temperature is the ambient temperature recommended 5-90%(non-condensing) 5-95%(non-condensing) Maximum
+80
+80
-40 0 modules run 5.3 General Section Feature
#
5.3.1 Antenna Type 5.3.2 Operating Voltage 5.3.3 Form Factor and Interface 5.3.4 Connector Detailed Description PIFA antenna 5.0V5%
High Speed USB2.0 Interface 1.25-8 pin connector (see appendix) 5.4 Software Driver Security 5.5 Power consumption Windows XP 32/64, 2000, 7,Vista 32/64, Linux OS WEP ,WPA ,WPA2,TKIP,AES Power consumption mode TX RX Associated Idle mode unassociated Idle mode Average 240mA 200mA 160mA 70mA Max:1A PAGE 7 OF 19 Version2.0 PRODUCTS SPECIFICATION W7LM1110 Remarks: Strongly recommend TV platform has to fulfill output current at least 1A 5.6 Recommended operation conditions for module Symbol VCC Rating 5V supply Min 4.75 Typ 5 Max 5.25 units V 5.7 DC characteristics 5.8 WoWLAN Wake Up System Via WiFiHigh Active 5.9 Reset Timing SPEC System Reset MT7601u ,Low Active PAGE 8 OF 19 Version2.0 PRODUCTS SPECIFICATION W7LM1110 5.10 Mechanical Dimensionsunit:mm DIM
(MM) 0-5 5-10 10-50 Tolerance
(MM) 0.15 0.20 0.30 5.11 Pin Description 1.25-8 Pin connector PAGE 9 OF 19 Version2.0 PRODUCTS SPECIFICATION W7LM1110 1 2 GND GND Wake WLAN WoW 3 RESET RESET 4 5 6 7 8 USB_D+
GND USB_D-
GND USB Data+ USB Data-
VCC VCC 5V 5V Pin Pin Define Description Part List Type IC 1 2 3 DC-DC 4 Capacitance 5 Capacitance 6 Capacitance 7 Capacitance 8 Capacitance 9 Capacitance 10 Capacitance 11 Capacitance 12 Capacitance 13 Capacitance 14 Capacitance 15 Capacitance 16 Resistance 17 Resistance 18 Resistance 19 Resistance 20 Resistance 21 Resistance 22 Resistance 23 Inductance 24 Inductance 25 Inductance 26 Inductance Specification model MT7601U FP6381A RT8059GJ5/DC/DC converter,1.5MHz,1A,TSOT-23-5 0201/50V/1pF/0.1pF/COG 0201/50V/1.2pF/0.1pF/COG 0201/50V/4.7pF/0.1pF/COG 0201/50V/5.6pF/0.25pF/COG 0201/50V/22pF/5%/C0G 0201/50V/47pF/5%/COG 0201/10V/0.1uF/10%/X5R 0402/50V/0.5pF/0.1pF/C0G 0402/50V/10pF/0.5pF/C0G 0402/10V/1uF/10/X5R 0402/6.3V/2.2uF/20/X5R 0603/6.3V/10uF/20%/X5R 0201 1/20W 0 5%
0201 1/20W 8.2K 5%
0201 1/20W 10K 5%
0201 1/20W 100K 5%
0402 1/16W 22K 5%
0402 1/16W 24K 5%
0402 1/16W 100K 5%
0201/2.7nH/0.1nH 0201/18nH/5%
0402/1.0nH/0.3nH 0805/4.7uH/20%/700mA Manufacturer P/N Numb er 1 MT7601U FP6381A RT8059 1 Manufacturer MTK FITI RICHTEK 1 GRM0335C1H1R0BA01D MURATA 2 GRM0335C1H1R2BA01D MURATA 2 GRM0335C1H4R7BA01D MURATA 2 GRM0335C1H5R6CA01D MURATA 1 GRM0335C1H220JA01D MURATA 1 GRM0335C1H470JA01D MURATA 13 GRM033R61A104KE15D MURATA 1 GRM1555C1HR50BA01D MURATA 1 GRM1555C1H100JA01D MURATA 5 GRM155R61A105KE15D MURATA 1 GRM155R60J225ME95D MURATA 2 GRM188R60J106ME47D MURATA 1 WR02X000 PAL RC0201JR-070R 1 WR02X103 JAL RC0201JR-078K2 1 WR02X103 JAL RC0201JR-0710K
/
/
/
1 WR02X104 JAL /
RC0201JR-07100K 1 WR04X223 JTL /
RC0402JR-0722K 1 WR04X243 JTL /
RC0402JR-0724K 1 WR04X104 JTL /
RC0402JR-07100K LQP03TN2N7B02D LQP03TN18NJ02D LQG15HN1N0S02D MURATA 2 MURATA 2 MURATA 1 1 MPB201210T-4R7M-NA2 MURATA WALSIN/YAGEO WALSIN/YAGEO WALSIN/YAGEO WALSIN/YAGEO WALSIN/YAGEO WALSIN/YAGEO WALSIN/YAGEO 27 28 29 Crystal oscillator 40MHz,CL=15pF10ppmLF SMD/3.2X2.5 W08-5801-002-00-810 IPEX RMVRN-33300-TP00 1 3225/40M W08-5801-002-00-
810 RMVRN-33300
-TP00 1 30 Shield WF7E 31 Connector 1.25/WS/8/A1253WRA-S-08PNL BT1T00R 1 1 WF7E A1253WRA-S-08PNLBT1 T00R
(H.ELE)
(CREC) zhongjun youqun
(RunDa) canda 32 PCB W7L-2/155*137.6*1.0/20 1 W7L PAGE 10 OF 19
(FuZhiXiang)
(KeXiang) Version2.0 PRODUCTS SPECIFICATION W7LM1110 15*12.5mm/
pet 1
(ZHONGSHAN FUZHOU ADHESIVE-
PRODUCT CO.,LTD) 33 label PCB Information W7LM1110 PCB UL Certification PAGE 11 OF 19 Version2.0 PRODUCTS SPECIFICATION W7LM1110 PCB gerber PAGE 12 OF 19 Version2.0 PRODUCTS SPECIFICATION W7LM1110 FCC Requirement changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. If this equipment does cause harmful Please notice that if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains FCC ID: 2AC23-W7LM1110 any similar wording that expresses the same meaning may be used. PAGE 13 OF 19 Version2.0 PRODUCTS SPECIFICATION W7LM1110 IC Requirement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exempts de licence d'Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes:
(1) Cet dispositif ne peut causer des interfrences; et
(2) Cet appareil doit accepter toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement de l'appareil. Please notice that if the IC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains IC:
12290A-W7LM1110 any similar wording that expresses the same meaning may be used. l'appareil hte doit porter une tiquette donnant le numro de certification du module d'Industrie Canada, prcd des mots Contient un module d'mission , du mot Contient ou d'une formulation similaire exprimant le mme sens, comme suit PAGE 14 OF 19 Version2.0 PRODUCTS SPECIFICATION W7LM1110 This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.
(1) user manual Information:
The module is limited to OEM installation ONLY The module is limited to installation in mobile or fixed applications. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shallinclude all required regulatory information/warning as show in this manual.
(2) Co-location Warning:
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
(3) OEM integration instructions:
This device is intended only for OEM integrators under the following conditions:
The transmitter module may not be co-located with any other transmitter or antenna. The module shall be only used with the integral antenna(s) that has been originally tested and certified with this module. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). In the event these conditions cannot be met (for example certain laptop configuration or co-location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product. In these and circumstance, the OEM integrator will be responsible for re-evaluating. The end product (including the transmitter) and obtaining a separate FCC authorization. that PAGE 15 OF 19 Version2.0
This product uses the FCC Data API but is not endorsed or certified by the FCC